SOLID STATE AREA LIGHTING
PROJECT NAME:
FIXTURE TYPE:
LCL SERIES-LED
S P E C I F I C A T I O N S
8" DIA.
HOUSING
Heavy cast low copper aluminum assembly (A356
alloy, <.2% copper) minimum wall thickness .188".
Housing provided with True Level™arm system to
connect to arm assembly. Cast aluminum door hinges
for easy housing access.
(203mm)
TOP VIEW
®
OPTICAL MODULE
Low copper A356 alloy (<.2% copper) cast aluminum
housing. Integrated clear tempered 3/16" glass lens
sealed with a continuous silicone gasket protects
emitters (LED's) and emitter Reflector-Prism optics, and
s e a l s t h e m o d u l e f ro m wa te r i n t r u s i o n a n d
environmental contaminants. Entire module is IP67
rated. Emitters (LED's) are Luxeon Rebels, high output,
Neutral White nominal 4100K CCT for the entire module
(Cool White nominal 6500K are available). Each emitter
is optically controlled by a Reflector-Prism injection
molded from H12 acrylic (3 types per module; one from
0° - 50°; one from 50° - 65°; one from 65° - 72°). Each
Reflector-Prism has indexing pins for aiming and is
secured to an optical plate made of matte black
anodized aluminum. The optical plate locates every
Reflector-Prism over an emitter. Reflector-Prisms are
secured to the optical plate with a UV curing adhesive.
The Reflector-Prisms are arrayed to produce IES Type II,
IES Type III, IES Type IV, and IES Type V-SQ distributions.
The entire Optical Module is field rotatable in 90°
increments. Both module and drivers are factory wired
using water resistant, insulated cord. Lens, module and
drivers are field replaceable.
LED DRIVER(s)
Drivers are UL and cUL recognized mounted on a single
plate and factory wired with quick-disconnect. Constant
current drivers are electronic and have a power factor of
>.90 and a minimum operating temperature of - 40°F.
Drivers accept an input of 120-277V, 50/60Hz. (Consult
factory for dimming applications.)
FINISH
Electrostatically applied TGIC Polyester Powder Coat on
substrate prepared with 20 PSI power wash at 140°F.
Four step iron phosphate pretreatment for protection
and paint adhesion. 400°F bake for maximum hardness
and durability. Texture finish is standard.
13.5"
(343mm)
19"
(483mm)
SIDE VIEW
LCL
PATENT PENDING
8" DIA.
(203mm)
TOP VIEW
18"
(457mm)
23"
(584mm)
SIDE VIEW
L C L -PENDANT MOUNT
PATENT PENDING
Lig h t Pollu tion Cont rol C lassification System
LPC F u l l cu t off 0% Uplight L um inaire
Sun Va lley Lighting
2011070
660 West Avenue O, Palmdale, CA 93551
Phone (661) 233-2000 Fax (661) 233-2001
www.usaltg.com
LCL SERIES - LED
S
P
E
C
I
F
I
C
A
T
I
O
N
S
®
WALL MOUNT
MOUNTING STYLES
XPY
MODULES
24"
(610mm)
33"
(838mm)
42"
30"
(1067mm)
(762mm)
64 LED Module*
3" I.D.
XPD
LCL E.P.A.= 1.54
Available in:
64 LED Module
XPS
24"
24"
(610mm)
(610mm)
ARM BRACKET EXTRUDED AND
CAST ALUMINUM CONSTRUCTION,
.50" DIA.
(13mm)
42"
(4) HOLES
(1067mm)
42"
(1067mm)
WALL PLATE
18.25"
21.5"
(464mm)
(546mm)
LCL-PM E.P.A.= 1.30
Available in:
64 LED Module
3" I.D.
3" I.D.
3" (76mm)
ARMS ARE HEAVY WALL EXTRUDED ALUMINUM
CONSTRUCTION. FOR ADDITIONAL
ARM OPTIONS SEE ARM SECTION.
O
R
D
E
R
LUMINAIRE-FITTER
OPTICS
LUMINAIRE
OPTICS
HORIZONTAL LAMP
REFLECTORS
LUMINAIRE
LCL
LCL-PM
TYPE II
4.5"
I
N
LED
G
I
O
M
A
T
O
N
LED
MOUNTING
FINISH
OPTIONS
LED
ARM MOUNT
STANDARD
TEXTURED FINISH
- NEUTRAL WHITE
XPY
BLACK
RAL-9005-T
XPD
WHITE
RAL-9003-T
(4100K)
(6500K)
OTHER LED COLORS AVAILABLE
CONSULT FACTORY
XPS
GREY
RAL-7004-T
1 .......................
DARK BRONZE
RAL-8019-T
VOLTAGE
120-277V
347-480V
WALLMOUNT
GREEN
RAL-6005-T
WM ..................
FOR SMOOTH FINISH
REMOVE SUFFIX “T”
(EXAMPLE: RAL-9005)
SEE SUN VALLEY CATALOG
FOR ADDITIONAL ARMS
Sun Va lley Lightin g
I
OPTIONS
*STANDARD
TYPE V-SQ
R
FINISH
CW - COOL WHITE
TYPE IV
F
VOLTAGE
64LED (64 Watts)
*NW
N
MOUNTING
COLOR
COLOR
TYPE III
*Modules shown depict a typical Type III light
distribution Reflector-Prism pattern.
(114mm)
660 West Avenue O, Palmdale, CA 93551
Phone (661) 233-2000 Fax (661) 233-2001
www.usaltg.com
SEE USALTG.COM FOR
ADDITIONAL COLORS
PHOTO CELL + VOLTAGE
(EXAMPLE: PC12OV) . . . .PC+V
TWIST LOCK PHOTO CELL+VOLTAGE
(EXAMPLE TPC120V) . . . . TPC+V
TWIST LOCK
RECEPTACLE ONLY. . . . . . TPR
SINGLE FUSE
(120V. , 277V) . . . . . . . . . SF
DOUBLE FUSE
(208V. , 240V) . . . . . . . . . DF
SOLID STATE AREA LIGHTING
PROJECT NAME:
FIXTURE TYPE:
LCL SERIES-LED
S P E C I F I C A T I O N S
LUMINAIRE
High Impact clear patterned polycarbonate diffusing
lens provided with durable corrosion resistant cast
aluminum housing. Lens frame is hinged for access.
Pendant Mount uses Tru-Level™ coupling mount. All
hardware is stainless steel.
16" DIA.
(406mm)
TOP VIEW
LED POWER ARRAY
Three-dimensional array of individual LED Tubes fastened
to a retaining plate. Each LED Tube consists of circuit
board populated with a multiple of LED’s and is
mechanically fastened to a radial aluminum heat sink.
An acrylic Lens and end cap protects the LED Tube’s
internal components.
TM
ANGLED POWER ARRAY™: Micro-Reflectors mounted
around each LED control the raw light output. LED Tubes are
uniquely aimed horizontally and vertically and combined
to produce highly efficient IES Distribution Types II, III, IV and
V. Used in conjunction with a clear prismatic lens.
44.5"
(1130mm)
SIDE VIEW
LCL
VERTICAL POWER ARRAY™: LED Tubes are aligned
vertically and arranged radially to produce an even raw
light distribution that simulates standard light sources.
Produces a minimal glare, symmetric diffuse light
distribution. Used in conjunction with opal diffusing lens.
PATENT PENDING
LED EMITTERS
High Output LED’s are driven at 350mA for nominal 1 Watt
output each. LED’s are available in standard Neutral
White (4000K), or optional Cool White (5000K) or Warm
White (3000K). Consult Factory for other LED options.
16" DIA.
LED DRIVER
UL and CUL recognized High Power Factor, Constant
Current LED drivers operate on input voltages from
120-277VAC, 50/60hz. Consult Factory for 347-480VAC.
Driver is mechanically fastened to a retaining bracket.
Main power quick disconnect provided. Driver has a
minimum 4KV of internal surge protection, 10KV & 20KV
Surge Protector optional. Dimming and High-Low Driver
options available.
FINISH
Polyester powder coat incorporates four step iron
phosphate process to pretreat metal surface for maximum
adhesion. Top coat is baked at 400°F for maximum
hardness and exterior durability.
(406mm)
TOP VIEW
30.5"
(775mm)
SIDE VIEW
L C L -PM
(PENDANT MOUNT)
PATENT PENDING
2013065
Sun Va lley Lighting
660 West Avenue O, Palmdale, CA 93551
Phone (661) 233-2000 Fax (661) 233-2001
www.usaltg.com
LCL SERIES - LED
S
P
E
C
I
F
WALL MOUNT
I
C
A
T
I
O
N
S
LED POWER ARRAY MODULES
TM
24"
(610mm)
42"
(1067mm)
ARM BRACKET
EXTRUDED AND
CAST ALUMINUM
CONSTRUCTION,
VPA - Vertical Array
Top Mount
.50" DIA.
(13mm)
(4) HOLES
WALL PLATE
18.25"
21.5"
(464mm)
(546mm)
LCL E.P.A.= 1.54
LCL-PM E.P.A.= 1.54
ANGLED POWER ARRAY
Available in:
10Array 80 LED Max.
ANGLED POWER ARRAY
Available in:
10Array 80 LED Max.
VERTICAL ARRAY
Available in:
8 Array 64 LED Max.
10 Array 80 LED Max.
VERTICAL ARRAY
Available in:
8 Array 64 LED Max.
10 Array 80 LED Max.
APA - Angled Array
Top Mount
3" (76mm)
4.5"
(114mm)
O
R
D
(Specifications subject to change without prior notice.)
E
R
OPTICS
LUMINAIRE
OPTICS
LUMINAIRE
ANGLED POWER ARRAY
LCL
LCL-PM
(PENDANT MOUNT)
I
N
# of LED’s
LUMINAIRE
G
I
COLOR
N
F
VOLTAGE
LED
No. LEDs
(CLEAR PRISMATIC LENS)
APA - II . . . . .
80LED
APA - III . . . . .
60LED
APA - IV . . . . . .
40LED
(89 Watts)
(67 Watts)
COLOR
NW (4000K)*
*STANDARD
CW (5000K)
WW (3000K)
(45 Watts)
APA - V . . . . . .
Wattages are
Max Input Watts
OTHER LED COLORS
AVAILABLE
CONSULT FACTORY
VOLTAGE
120
208
240
277
347
480
O
R
M
VPA - SYM . . .
80LED
I
(72 Watts)
48LED
(53 Watts)
Wattages are
Max Input Watts
N
OPTIONS
MOUNTING
FINISH
OPTIONS
ARM MOUNT
STANDARD
TEXTURED FINISH
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
2-90 . . . . . . . . . . . .
GREY
RAL-7004-T
3-90 . . . . . . . . . .
DARK BRONZE
RAL-8019-T
3-120 . . . . . . . . .
GREEN
RAL-6005-T
4-90 . . . . . . . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
POST TOP
PT . . . . . . . . . . . . . . . .
660 West Avenue O, Palmdale, CA 93551
Phone (661) 233-2000 Fax (661) 233-2001
www.usaltg.com
O
FINISH
(89 Watts)
64LED
Sun Va lley Lightin g
T
MOUNTING
VERTICAL POWER ARRAY
(OPAL LENS)
A
PATENT PENDING
FOR SMOOTH FINISH
REMOVE SUFFIX “T”
(EXAMPLE: RAL-9500)
SEE USALTG.COM FOR
ADDITIONAL COLORS
LENS OPTIONS:
CLEAR PRISMATIC
POLYCARBONATE . . . CP
(STANDARD LENS)
CLEAR PRISMATIC
ACRYLIC. . . . . . . . . . . CA
OPAL SMOOTH
ACRYLIC. . . . . . . . . . . WA
HOUSE SIDE SHIELD. . . HS
DIMMABLE DRIVER(S)
(0-10V). . . . . . . . . . . . DIM
HIGH-LOW DIMMING FOR
HARDWIRED SWITCHING OR
NON-INTEGRATED MOTION
SENSOR . . . . . . . . . . . . HLSW
PHOTO CELL + VOLTAGE
(EXAMPLE: PC120V) . . . .PC+V
10KV SURGE
PROTECTOR. . . . . . . . 10SP
20KV SURGE PROTECTOR
(277V & 480V Only) . . . . 20SP
STEM MOUNT + LENGTH(IN)
(EXAMPLE: SM48) . . . . . .SM+L
CHAIN MOUNT + LENGTH(IN)
(EXAMPLE: CM48) . . . . . .CM+L