STEP-DOWN BUTT CONNECTORS FOR CONNECTING A LARGER WIRE TO A SMALLER WIRE NEW FROM NSPA! Has two stripes - one on each end to indicate which wire size to insert, and which crimp die to use AVAILABLE IN THE FOLLOWING STYLES: Uninsulated Krimpa-Seal MultiLink SEALED CRIMP CONNECTOR SEALED CRIMP & SOLDER CONNECTOR WHY IS OURS SO MUCH BETTER? THEIRS: The outside diameter of the butt connector is the same on both ends and only the inside diameter is adjusted for the different wire gauge. This means that the side for the smaller wire has a much thicker wall than normal and is extremely difficult to crimp. POTENTIAL FOR WIRE PULL-OUT! THEIRS: Has a color stripe to indicate where the smaller size of wire is inserted. However, it must be crimped in the larger crimp die. For example, on their connector for 14-16 to 10-12 AWG, the BLUE stripe indicates the side where a 14-16 AWG wire is to be inserted. However, it must be crimped in the YELLOW crimp die. CONFUSING! OURS! We vary the inside AND the outside diameter of the connector which means that both sides will make positive a crimp. STRONG MECHANICAL TERMINATION! OURS! Has two stripes - one on each end - to indicate which wire size to insert. Plus, the stripe matches the crimp die that needs to be used. For example, the blue stripe indicates the side where a 14 or 16 AWG wire is to be inserted, and it will be crimped in the blue crimp die. MAKES SENSE! See back for part number & ordering info Sealed Electrical System • It’s a Question of Integrity® SAMPLES AVAILABLE ORDER YOURS TODAY! Now is the time to switch to the new step-downs from NSPA or add them to your catalog. Call us today for a quote and some ideas on how to introduce them to your customers. UNINSULATED STEP-DOWN CONNECTORS Unsealed - No Heat Shrink Tubing ML56-20-BP ML56-16-BP ML56-14-BP Side #1 ML56-10-BP Side #2 Part # Color Stripe Wire ML56-20-BP White 24-22 AWG White (24-22 AWG) Red 20-18 AWG Red (20-18 AWG) ML56-16-BP Red 20-18 AWG Red (20-18 AWG) Blue 16-14 AWG Blue (16-14 AWG) ML56-14-BP Blue 16-14 AWG Blue (16-14 AWG) Yellow 12-10 AWG Yellow (12-10 AWG) ML56-10-BP Yellow 12-10 AWG Yellow (12-10 AWG) Red 8 AWG Red (8 AWG) Krimpa-Seal Crimp Die (Insulated) Color Stripe STEP-DOWN CONNECTORS Wires KS56-20 Crimp Die (Insulated) KS56-16 Sealed Crimp Connectors Sealed Electrical System • It’s a Question of Integrity® KS56-14 Heat Shrink Side #1 Part # Tubing Color Color Stripe Wire Crimp Die (Insulated) KS56-20 Red White 24-22 AWG KS56-16 Blue Red 20-18 AWG KS56-14 Yellow Blue KS56-10 Pink Yellow MultiLink KS56-10 Side #2 Color Stripe Wires Crimp Die (Insulated) White (24-22 AWG) Red 20-18 AWG Red (20-18 AWG) Red (20-18 AWG) Blue 16-14 AWG Blue (16-14 AWG) 16-14 AWG Blue (16-14 AWG) Yellow 12-10 AWG Yellow (12-10 AWG) 12-10 AWG Yellow (12-10 AWG) Red 8 AWG Red (8 AWG) STEP-DOWN CONNECTORS ML56-20 Sealed Crimp & Solder Connectors Sealed Electrical System • ML56-16 It’s a Question of Integrity® ML56-14 Heat Shrink Side #1 Part # Tubing Color Color Stripe Wire Crimp Die (Insulated) ML56-20 Red White 24-22 AWG ML56-16 Blue Red 20-18 AWG ML56-14 Yellow Blue ML56-10 Pink Yellow ML56-10 Side #2 Color Stripe Wires Crimp Die (Insulated) White (24-22 AWG) Red 20-18 AWG Red (20-18 AWG) Red (20-18 AWG) Blue 16-14 AWG Blue (16-14 AWG) 16-14 AWG Blue (16-14 AWG) Yellow 12-10 AWG Yellow (12-10 AWG) 12-10 AWG Yellow (12-10 AWG) Red 8 AWG Red (8 AWG) National Standard Parts Associates 800-874-6813 www.nspa.com Sealed Electrical System • It’s a Question of Integrity®