Prices as of June 29, 2016. Check Web site for most current prices.
NEMA 4 Single-Door Wall Mount
Right-Flanged Disconnect SN4 Series
• S quare D Class 9422 disconnect switches with flange-mounted variable depth
operating mechanisms or cable
mechanism, and Class 9422 flangemounted variable depth operating
mechanisms or cable mechanism for
circuit breakers
Bulletin A19 enclosures will not accept
Square D Class 9422 bracket-mounted
disconnect devices, 9422TG1, or TG2
devices.
• Socomec Disconnect switches with
cable, flange-mounted cable operator
and
handles. Handles 37299002 and
37299003,
cable operator 3729903, and cables
37299992 (3ft) or 37299003 (5ft).
SN4 Series
Applications
Designed to house the following:
•A
llen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable depth operating mechanisms and
Bulletin 1494V flange-mounted variable
depth operating mechanisms for circuit
breakers Allen-Bradley Bulletin 1494VR1, -R2, and
-W2 operating handles and Allen-Bradley
Bulletin 1494F disconnect devices or
Bulletin 1494D circuit breaker operators
will not fit these enclosures.
•A
BB Controls flange-mounted variable
depth operating mechanisms for
disconnect switches and circuit breakers
• C utler-Hammer/Westinghouse Type
C361 flange-mounted variable depth
operating mechanisms with disconnect
switches and Type C371 flange-mounted
variable depth operating mechanisms
for circuit breakers
•G
eneral Electric Type STDA flange
handles and variable depth operating
mechanisms for disconnect switches
and circuit
breakers; also Spectra Flex™ cable
operators for circuit breakers
• I -T-E Max-Flex™ flange-mounted variable
depth operating handles for circuit
breakers
Finish
• ANSI 61 gray polyester powder inside
and out over phosphatized surfaces
• Painted steel and perforated subpanels
are white polyester powder over phosphatized surfaces
• Galvanized and stainless steel subpanels
are a conductive finish (unpainted)
Listings
• UL 508, Types 4, 12, & 13, UL File E64791
• CSA Certified, Types 4 & 12,
CSA File LL66078
• NEMA/EEMAC Types 3, 4, 12, & 13
• JIC EL-1-71
Construction
• 14 gauge steel bodies and doors
• Plasma welded seams
•Rolled lip around all sides of opening
keeps out liquids and contaminants
• Stainless steel exterior hardware
• Stainless steel door clamps around three
sides of doors for a watertight seal; no
additional door hardware required
• Remove doors easily by pulling
continuous hinge pin
• Polyurethane poured-in-place gasket
• External mounting feet
• Collar studs for mounting optional
subpanel
• Grounding provisions provided
• Bracket welded to door for attaching
disconnect interlock door catch
• Holes in body for mounting disconnect
operating handle and operating
mechanism. These enclosures are
designed to operate properly without
the use of door hardware
Notes:
• Disconnect switch or circuit breakers,
operating handle, operating mechanism,
and door hardware must be ordered
separately.
• Operator adapter plates are not
required with this enclosure series.
• Make sure the disconnect device you
are using will fit the enclosure size you
choose.
Enclosure Shipping Schedule
Same day
1 - 7 days
Color indicates shipping lead time in business days.
Part Number
Price
Enclosure Size
HxWxD
Painted Steel
Subpanel
Galvanized
Subpanel
Perforated
Subpanel
Stainless Steel
Subpanel
SN4242108
SN4242508
SN4302508
SN4363108
SN4423112
SN4423712
SN4483712 **
SN4603712 **
$412.00
24x21x8 [610x543x207]
$445.00
24x25x8 [610x645x207]
$494.00
30x25x8 [762x645x207]
NP2420
NP2424
NP3024
NP3630
NP4230
NP4236
NP4836
NP6036
NP2420G
NP2424G
NP3024G
NP3630G
NP4230G
NP4236G
NP4836G
NP6036G
NP2420PP
NP2424PP
NP3024PP
NP3630PP
NP4230PP
NP4236PP
NP4836PP
NP6036PP
NP2420SS
NP2424SS
NP3024SS
NP3630SS
NP4230SS
NP4236SS
NP4836SS
NP6036SS
$610.00
36x31x8 [914x797x207]
$742.00
42x31x12 [1067x797x308]
$826.00
42x37x12 [1067x949x308]
$900.00
48x37x12 [1219x949x308]
$1,049.00 60x37x12 [1524x949x308]
Note: Subpanels must be ordered separately. Dimensions in inches [millimeters].**These enclosures have a closed-cell neoprene gasket, not poured-in-place.
Book 3 (14.1)
eEN-164
Disconnect Enclosures
1-800-633-0405
Prices as of June 29, 2016. Check Web site for most current prices.
NEMA 4 Single-Door Wall Mount
Right-Flanged Disconnect SN4 Series
Company
Information
Terminal Blocks
Power
Distribution
Blocks
Dimensions
Wiring
Accessories
in [mm]
ZIPLink
Connection
System
Multi-wire
Connectors
Sensor Cables
and Connectors
M12 Junction
Blocks
Panel Interface
Connectors
Wiring Duct
Cable Ties
Wire
Bulk
Multi-conductor
Cables
Wire
Management
Products
Power Supplies
DC Converters
Transformers
and Filters
Circuit Protection
Tools
Test
Equipment
Enclosures
Enclosure
Climate Control
Safety: Electrical
Components
Safety: Protective
Wear
Terms and
Conditions
See our website: www.AutomationDirect.com for complete engineering drawings.
Book 3 (14.1)
www.automationdirect.com/enclosures
Disconnect Enclosures
eEN-165
Prices as of June 29, 2016. Check Web site for most current prices.
Enclosures Subpanels
Subpanels for NEMA 1, 12, 4 and 4X wall
mount enclosures and WC9 NEMA 12
operator consoles
•12 gauge steel (perforated panels are 14 gauge)
•Subpanels with any side over 17” have 3/4” flange on all sides
• P ainted steel and perforated subpanels are white polyester powder over
phosphatized surfaces
•G
alvanized subpanels have a conductive finish (no paint)
Panels listed fit the following enclosures:
•NEMA 1 large (NIC)
•NEMA 12 large (JIC)
•NEMA 12 single door wall mount
•NEMA 12 two door wall mount
•NEMA 12 single door flush wall mount
•NEMA 4 (N) and 4X (SSN) single door wall mount
• NEMA 12 operator consoles (WC9)
NOTE: Use NPxxxx subpanels in NEMA 1, NEMA 4 and 4X, and NEMA 12 enclosures only.
Do NOT use NPxxxx subpanels in NEMA 4/12 enclosures with a C suffix.
Dimensions
in [mm]
Perforated panels have 0.13” diameter holes at 0.25” spacing.
See our website: www.AutomationDirect.com for complete Engineering Drawings.
Book 3 (14.1)
eEN-212
Enclosure Subpanels
1-800-633-0405
Prices as of June 29, 2016. Check Web site for most current prices.
Non-Metallic Enclosures –
Control Series Subpanels
Carbon steel subpanels for Control Series non-metallic enclosures
Subpanel Part Price
Number
HW-WM1610CS
HW-WM2016CS
HW-WM2412CS
HW-WM2420CS
HW-WM2424CS
HW-WM3020CS
HW-WM3024CS
HW-WM3630CS
HW-WM4836CS
HW-WM6036CS
$25.00
Subpanel Size
HxW
13.00 x 8.50 [330 x 216]
Enclosure
Size HxW
BA
BB
BK
BL
No. of Hole
BT Panel
Type Holes Dia. Wt.
16 x 10 [406 x 54] 13.00 [330] 8.50 [216] 12.00 [305] 7.50 [191] 0.08 [2]
Flat
$43.00 17.00 x 13.00 [432 x 330] 20 x 16 [508 x 406] 17.00 [432] 13.00 [330] 15.25 [387] 11.25 [286] 0.09 [2] Formed
$41.50
21.00 x 9.00 [533 x 229]
24 x 12 [610 x 305] 21.00 [533] 9.00 [229] 19.25 [489] 7.25 [184] 0.09 [2] Formed
$85.00 21.00 x 17.00 [533 x 432] 24 x 20 [610 x 508] 21.00 [533] 17.00 [432] 19.25 [489] 15.25 [387] 0.13 [3]
Flat
4
0.31 [8] 3.3 lb
4
0.31 [8] 6.7 lb
4
0.50 [13] 8.7 lb
4
0.50 [13] 10.8 lb
$104.00 21.00 x 21.00 [533 x 533] 24 x 24 [610 x 610] 21.00 [533] 21.00 [533] 19.25 [489] 19.25 [489] 0.13 [3] Formed
4
0.50 [13] 13.4 lb
$108.00 27.00 x 17.00 [686 x 432] 30 x 20 [763 x 508] 27.00 [686] 17.00 [432] 25.25 [641] 15.25 [387] 0.13 [3] Formed
5
0.50 [13] 14lb
$133.00 27.00 x 21.00 [686 x 533] 30 x 24 [762 x 610] 27.00 [686] 21.00 [533] 25.25 [641] 19.25 [489] 0.13 [3]
Flat
4
0.50 [13] 17lb
$208.00 33.00 x 27.00 [838 x 686] 36 x 30 [914 x 762] 33.00 [838] 27.00 [686] 31.25 [794] 25.25 [641] 0.13 [3]
Flat
4
0.50 [13] 27lb
$302.00 33.00 x 45.00 [838 x 1143] 48 x 36 [1219 x 914] 45.00 [1143] 33.00 [838] 43.00 [1092] 31.25 [794] 0.13 [3]
Flat
$374.00 57.00 x 33.00 [1448 x 838] 60 x 36 [1524 x 914] 57.00 [1448] 33.00 [838] 55.25 [1403] 31.25 [794] 0.13 [3] Formed
8
0.50 [13] 41lb
8
0.50 [13] 60lb
Note: Dimensions in inches [millimeters].
Aluminum Subpanels for Control Series non-metallic enclosures
Subpanel
Subpanel Size
Part Number Price
HxW
HW-WM1610A
HW-WM2016A
HW-WM2412A
HW-WM2420A
HW-WM2424A
HW-WM3020A
HW-WM3024A
HW-WM3630A
HW-WM4836A
HW-WM6036A
$38.50
13.00 x 8.50 [330 x 216]
Enclosure
Size HxW
BB
BK
BL
Panel No. of Hole Wt.
Type Holes Dia.
BT
Flat
4
0.31 [8]
1lb
$43.00 17.00 x 13.00 [432 x 330] 20 x 16 [508 x 406] 17.00 [432] 13.00 [330] 15.25 [387] 11.25 [286] 0.09 [2]
Formed
4
0.31 [8]
2lb
$41.50
21.00 x 9.00 [533 x 229]
16 x 10 [406 x 54]
BA
13.00 [330] 8.50 [216] 12.00 [305] 7.50 [191] 0.08 [2]
Formed
4
0.50 [13] 4.5 lb
$85.00 21.00 x 17.00 [533 x 432] 24 x 20 [610 x 508] 21.00 [533] 17.00 [432] 19.25 [489] 15.25 [387] 0.13 [3]
24 x 12 [610 x 305] 21.00 [533] 9.00 [229] 19.25 [489] 7.25 [184] 0.09 [2]
Flat
4
0.50 [13] 4.5 lb
$104.00 21.00 x 21.00 [533 x 533] 24 x 24 [610 x 610] 21.00 [533] 21.00 [533] 19.25 [489] 19.25 [489] 0.13 [3]
Formed
4
0.50 [13] 5.5 lb
$108.00 27.00 x 17.00 [686 x 432] 30 x 20 [763 x 508] 27.00 [686] 17.00 [432] 25.25 [641] 15.25 [387] 0.13 [3]
Formed
5
0.50 [13] 5.8 lb
$133.00 27.00 x 21.00 [686 x 533] 30 x 24 [762 x 610] 27.00 [686] 21.00 [533] 25.25 [641] 19.25 [489] 0.13 [3]
Flat
4
0.50 [13] 7lb
$208.00 33.00 x 27.00 [838 x 686] 36 x 30 [914 x 762] 33.00 [838] 27.00 [686] 31.25 [794] 25.25 [641] 0.13 [3]
Flat
4
0.50 [13] 11lb
$302.00 33.00 x 45.00 [838 x 1143] 48 x 36 [1219 x 914] 45.00 [1143] 33.00 [838] 43.00 [1092] 31.25 [794] 0.13 [3]
Flat
8
0.50 [13] 22lb
$374.00 57.00 x 33.00 [1448 x 838] 60 x 36 [1524 x 914] 57.00 [1448] 33.00 [838] 55.25 [1403] 31.25 [794] 0.13 [3]
Formed
8
0.50 [13] 23lb
Note: Dimensions in inches [millimeters].
Dimensions
in [mm]
Enclosure Shipping Schedule
Same day
Color indicates shipping lead time in business days
Note: Subpanels less than 33” wide do not have center holes as shown.
See our website: www.AutomationDirect.com for complete Engineering Drawings.
Book 3 (14.1)
eEN-224
Enclosure Subpanels
1-800-633-0405