MasteringEngineering: Assignment Print View
Page 1 of 8
COZ Block 5
Due: 11:59pm on Friday, October 8, 2010
Note: You will receive no credit for late submissions. To learn more, read your instructor's Grading Policy
[Switch to Standard Assignment View]
COZ Block 5 - Problem 1
If
=5
, determine the internal shear force at point C in the double-overhang beam.
Part A
Express your answer with the correct sign
ANSWER:
= Answer not displayed
kN
COZ Block 5 - Problem 2
If
=6
, determine the internal moment at point E in the overhang beam.
Part A
Express your answer with the correct sign.
ANSWER:
= Answer not displayed
kN*m
COZ Block 5 - Problem 3
If
= 68
, determine the internal moment at point E.
Part A
Express your answer with the correct sign.
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
ANSWER:
= Answer not displayed
Page 2 of 8
N*m
COZ Block 5 - Problem 4
Determine the internal normal force acting at point C. The cooling unit has a total mass of 225
with a center of mass at G.
Part A
Express your answer with the correct sign.
ANSWER:
= Answer not displayed
N
COZ Block 5 - Problem 5
Note: This problem follows the sign convention of the book!
Part A
Identify the shear diagram for the beam.
ANSWER:
Answer not displayed
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Page 3 of 8
Part B
Identify the moment diagram for the beam.
ANSWER:
Answer not displayed
COZ Block 5 - Problem 6
Note: This problem follows the sign convention of the book!
Part A
Identify the shear diagram for the overhang beam.
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Page 4 of 8
ANSWER:
Answer not displayed
Part B
Identify the moment diagram for the overhang beam.
ANSWER:
Answer not displayed
COZ Block 5 - Problem 7
Part A
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Determine the placement
support B.
of the roller support B so that the maximum moment within the span AB is equivalent to the moment at the
Express your answer in terms of
ANSWER:
Page 5 of 8
.
= Answer not displayed
COZ Block 5 - Problem 8
Note: This problem follows the sign convention of the book!
Part A
Identify the shear diagram for the simply supported beam.
ANSWER:
Answer not displayed
Part B
Identify the moment diagram for the simply supported beam.
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Page 6 of 8
ANSWER:
Answer not displayed
COZ Block 5 - Problem 9
Note: This problem follows the sign convention of the book!
Part A
Identify the shear diagram for the beam.
ANSWER:
Answer not displayed
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Page 7 of 8
Part B
Identify the moment diagram for the beam.
ANSWER:
Answer not displayed
COZ Block 5 - Problem 10
Note: This problem follows the sign convention of the book!
Part A
Identify the shear diagram for the shaft. The supports at A and B are journal bearings.
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010
MasteringEngineering: Assignment Print View
Page 8 of 8
ANSWER:
Answer not displayed
Part B
Identify the moment diagram for the shaft.
ANSWER:
Answer not displayed
Score Summary:
Your score on this assignment is 0%.
You received 0 out of a possible total of 10 points.
http://session.masteringengineering.com/myct/assignmentPrintView?assignmentID=10... 2-11-2010