Replacement Parts Catalog. Trauma.
2013
Terms and Conditions
This replacement parts catalog gives you an overview of
all replacement parts used in conjunction with a specific
instrument sold by Synthes. The images shown are of the
main part as well as the replacement part(s).
Customer Service/Order Processing
For telephone orders, call Synthes Customer Service toll free:
1-800-523-0322
For fax orders, fax toll free: 1-800-Synthes (796-8437)
All orders are subject to acceptance by:
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
All orders are shipped UPS Standard (two–three business
days), unless otherwise requested.
F.O.B. Monument, Colorado; freight charges are prepaid and
added to the invoice.
2013 Replacement Parts Catalog—Trauma
Synthes
Replacement Parts
Part
Number
Description
Replacement
Part Number
Description
03.010.048
Recon Locking Aiming Arm,
for Lateral Entry Femoral Nails-EX
D66
Thumb Knob for Ex Aiming Arms
03.010.200
SureLock Aiming Arm,
for Antegrade Femoral Nails
A11
Flange Nut for 03.010.200
A15
Shoulder Bolt for 03.010.200
B89
Protection Sleeve for 03.113.028
Aiming Arms for 3.5 mm LCP Low Bend
Medial Distal Tibia Plates
03.113.001, Right
03.113.003 Left
B38
Knob for 03.113.001 and
03.113.003
Insertion Handle for 3.5 mm Low Bend
Medial Distal Tibia Plate
03.113.025, Right
03.113.026 Left (shown)
B37
M3.5 Screw for 03.113.025
and 03.113.026
05.001.099
18N
Power Supply for Maintenance
Station 05.001.099
Cord for Maintenance Station
03.113.028
Depth Gauge for 3.5 mm LCP
Percutaneous Instrument System
Photo Not Available
Maintenance Station, for Electric Pen Drive
18P
2
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
Replacement
Part Number
313.94,
313.94.96
Cruciform Screwdriver with Holding Sleeve,
for 2.4 mm Cortex Screws
328
Spring
313.97,
313.97.97,
313.97.96,
313.969
Holding Sleeve
299
Spring
314.08
Holding Sleeve for 314.29
326
Coupling Sleeve
328
Spring
Description
314.09
Holding Sleeve for 314.57 and 314.55
328
Compression Spring
314.11
Holding Sleeve for Large Hexagonal
Screwdrivers
759
Threaded Cap
774
Compression Spring
24C
Synthetic Screen
314.291
Sliding Mechanism,
for Collinear Reduction Clamp
2013 Replacement Parts Catalog—Trauma
Synthes
3
Replacement Parts
Part
Number
Description
314.31
Holding Sleeve, for 314.20
Replacement
Part Number
Description
329
Threaded Cap
330
Spring
319.007
Depth Gauge for 2.0 and 2.4 mm
Screws, Long
225
Nosepiece
319.01,
319.04,
319.09
Depth Gauges, for 2.7 mm and small screw
666
Knurled Cap
319.10
Depth Gauge, for large screws
(up to 110 mm)
B46
Headpiece for Depth Gauge
319.11
Depth Gauge, for mini screws (up to 24 mm)
610
Sleeve
322.32
3.5 mm DCP Drill Guide, neutral and load,
and load, 60 mm
634
Drill Sleeve, green
635
Drill Sleeve, gold
4
Synthes
2013 Replacement Parts Catalog—Trauma
Photo Not Available
Part
Number
322.43
322.44
Description
4.5 mm DCP Hip Drill Guide, neutral
and load, 60 mm
4.5 mm DCP Drill Guide, neutral and load
and load, 60 mm
Replacement
Part Number
Description
631
Drill Sleeve, green
632
Drill Sleeve, gold
629
Drill Sleeve, green
630
Drill Sleeve, gold
323.050
Insertion Guide, for 3.5 mm LCP Proximal
Humerus Plate
27H
Replacement Screw
323.201
2.0 mm Universal Drill Guide
L26
1.5 mm Drill Sleeve
L27
Universal Head
852
Compression Spring
2013 Replacement Parts Catalog—Trauma
Synthes
5
Replacement Parts
Part
Number
Description
323.202
2.4 mm Universal Drill Guide
Replacement
Part Number
Description
L28
1.8 mm Drill Sleeve
L29
Threaded Nipple
852
Compression Spring
323.204
2.0 mm/2.4 mm Universal Drill Guide
852
Compression Spring
323.26
2.7 mm Universal Drill Guide
850
2.0 mm Drill Sleeve
851
Universal Head
852
Compression Spring
837
Gold Drill Guide
838
Green Drill Guide
323.35
6
3.5 mm LC-DCP Drill Guide, neutral and load
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
323.36
3.5 mm Universal Drill Guide
323.45
323.46
323.500
4.5 mm LC-DCP Drill Guide, neutral and load
4.5 mm Universal Drill Guide
5.0 mm/4.5 mm LCP Universal Drill Sleeve
Replacement
Part Number
Description
846
Spring
847
Threaded Nipple
848
Drill Sleeve
839
Gold Drill Guide
840
Green Drill Guide
842
Spring
843
Threaded Nipple
844
Drill Sleeve
B42
Replacement Spring for 323.500
B43
Replacement Drill Bit for 323.500
B44
Replacement Retaining Cap
for 323.500
Photo Not Available
2013 Replacement Parts Catalog—Trauma
Synthes
7
Replacement Parts
Part
Number
Description
324.003,
324.004,
Proximal Tibia LISS Insertion Guide
Right (shown)
Left
Replacement
Part Number
Description
28N
Replacement Thumb
Screw-S Liss Insertion Guide
28P
Replacement Thumb
Screw-T Liss Insertion Guide
28R
Replacement Thumb
Screw-U Liss Insertion Guide
Distal Femur LISS Insertion Guide
Left (shown)
Right
28L
324.011,
324.012
Replacement Thumb
Screw-X Liss Insertion Guide
325.010
Soft Tissue Retractor, small, extendible
18E
Locking Nut for Soft Tissue
Retractor 325.010
18F
Blade for 325.010
325.030
Reduction Handle, rounded, for 1.6 mm
guide wire
18B
Tightening Screw for
Reduction Handle 325.030
328.010
Soft Tissue Retractor, large, extendible
18C
Locking Nut for Soft Tissue
Retractor 328.010
18D
Blade for 328.010
8
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
Replacement
Part Number
Description
328.030
Reduction Handle, rounded,
for 2.8 mm guide wire
18A
Tightening Screw for Reduction
Handle 328.030
329.15
Bending Pliers for 2.7 mm and 3.5 mm plates
718
Screw with Knurled Head
329.30
Plate-Bending Press
705
Lower Anvil Adjustment
Screw, Original
717
Lower Anvil, Original
71A
Screw with Spring Ball Head
D08
Upper Anvil, replaceable
D09
Lower Anvil
Original version of the Plate-Bending Press can be
identified by the upper anvil as it is not replaceable.
D10
Lower Anvil
Adjustment Screw
332.09
641
Hex Bolt
Chisel Guide, with adjustable angle
2013 Replacement Parts Catalog—Trauma
Synthes
9
Replacement Parts
Part
Number
Description
338.13
DHS Triple Reamer, complete
640
Nut
470
Chuck Sleeve Screw
351.16,
351.16J
Flexible Shaft Connector, for use with
hand drill, cannulated
Quick coupling
Jacobs chuck
471
Chuck Pin
351.24
11.0 mm Cannulated Cutter
431
Thumb Screw
355.16
Curved Driving Piece
656
Hex Bolt
356.511
Titanium Tibial Nail Insertion Handle
61A
Spring Knob Assembly
357.372
Helical Blade Inserter
N55
Replacement Alignment
Indicator for 357.372
10
Synthes
2013 Replacement Parts Catalog—Trauma
Replacement
Part Number
Description
Photo Not
Available
Part
Number
Description
Replacement
Part Number
Description
391.21
Wire Tightener, with handle and 2 pegs,
230 mm length
658
Peg for Wire Tightener
391.74
Bolt Cutter Head, for 5.0 mm fixation pins
577
Screw
391.77
Bolt Cutter Head, for 5.0 mm Fixation Pins,
extra long
573
Ratchet Plate-Square Tooth
576
Retaining Wire Ring
577
Screw
578
Spring
B45
Tip for Impactor
391.919
Impactor
2013 Replacement Parts Catalog—Trauma
Synthes
11
Replacement Parts
Part
Number
Description
Replacement
Part Number
Description
392.11
Telescoping Wire Guide for use with
Small Air Drill (511.10 or 511.11)
659
Threaded Cap
393.66
Transverse Clamp
807
Locking Bolt
393.78
Depth Gauge, for Large External Fixator
860
Pan Head Screw M2X5
394.06
Small Distractor
820
Adjusting Nut
394.071
Mini Lengthening Apparatus, 110 mm
886
Screw Knob
D14
Pin Holder
D16
Hex Nut/Washer Assembly
12
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
394.08
Mini Lengthening Apparatus, 160 mm
394.44
End Piece with double joint
Replacement
Part Number
Description
D14
Pin Holder
D16
Hex Nut/Washer Assembly
D24
Hex Screw for Bracket
D25
Screw Knob
662
Cotter Pin, Chain and
Connecting Rings
817
Spring Nut
394.45,
394.46
Holding Sleeve
831
Wing Screw
395.49
Medium Distractor
S10
Cotter Pin, Chain and Connect Rings
for Medium Distractor
S11
Spring Nut for Medium Distractor
S12
Wing Screw for Medium Distractor
2013 Replacement Parts Catalog—Trauma
Synthes
13
Replacement Parts
Part
Number
Description
398.74
Small Pelvic Forceps with jaws, 200 mm length
Replacement
Part Number
Description
302
Screw
303
Leaf Spring
398.75
Medium Pelvic Forceps with jaws,
250 mm length
302
Screw
398.88
Pelvic Reduction Forceps, with speed lock,
330 mm length
803
Stop Nut
804
Thumb Nut
14
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
Replacement
Part Number
398.93
Bone Spreader, 7 mm beak width, 140 mm
691
Screw for Leaf Spring
399.01
Reduction Forceps with sliding jaws,
864
Stop Nut
865
Spring
Description
2013 Replacement Parts Catalog—Trauma
Synthes
15
Replacement Parts
Part
Number
Description
Replacement
Part Number
Description
399.54
Chisel Handle
685
Hex Screw I
399.77
Reduction Forceps, with points, speed lock,
130 mm length
Photo Not Available
562
Stop Nut
399.78
Reduction Forceps, with points, speed lock,
205 mm length
739
Adjusting Nut
399.79
Reduction Forceps, with serrated jaw,
speed lock, 132 mm length
Photo Not Available
564
Adjusting Nut
510.20
Right Angle Drive, for use with
Universal Air Drill (510.01)
Photo Not Available
471
Chuck Pin
496
Locking Lever
16
Synthes
2013 Replacement Parts Catalog—Trauma
Part
Number
Description
Replacement
Part Number
Description
511.904
Sternum Top, for use with Reciprocating
Saw Attachment
A29
A39
Screw
Allen Wrench/3.5 mm Hex
512.15,
512.15D,
512.15S,
512.16
Double Air Hoses
C43
O Ring Coupler
2013 Replacement Parts Catalog—Trauma
Synthes
17
Synthes USA
1302 Wrights Lane East
West Chester, PA 19380
Telephone: (610) 719-5000
To order: (800) 523-0322
Fax: (610) 251-9056
© 2011 Synthes, Inc. or its affiliates. All rights reserved.
www.synthes.com
LCP and Synthes are trademarks of Synthes, Inc. or its affiliates.
Printed in U.S.A. 2/13 J10342-B