3M™ Embossed Tin-Plated Copper Foil
Tape 1345
Data Sheet
January 2014
Description
3M™ Embossed Tin-Plated Copper Foil Tape 1345 consists of an embossed 1-ounce
deadsoft tin-plated copper foil backing and an aggressive pressure-sensitive acrylic
adhesive. The edges of the embossed pattern pressed into the foil cut through the
adhesive layer to establish reliable metal-to-metal contact between the backing and the
application substrate.
• Embossed deadsoft 1-ounce tin-plated copper foil backing
• Conductivity “through the adhesive”
• Supplied on a removable liner for easy handling and diecutting
Agency
Approvals & Self
Certifications
Meets flame retardant requirements of UL510, Product Category OANZ2, and 3M File No. 17385
RoHS
2011/65/EC
"RoHS 2011/65/EU" means that the product or part does not contain any of the substances in
excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The
MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and
belief, which may be based in whole or in part on information provided by third party suppliers to 3M.
Applications
3M™ Embossed Tin-Plated Copper Foil Tape 1345 is typically used for applications
requiring excellent electrical conductivity from the application substrate through the
adhesive to the foil backing. Common uses include grounding and EMI shielding in
equipment, components, shielded rooms, etc. The tin plating on the copper foil backing
facilitates soldering and improves resistance to oxidation and discoloration.
Shielding
Effectiveness
Many factors determine the true shielding effectiveness of a shielding tape, including type
and thickness of foil, adhesive type, intimacy of contact, smoothness of application
surface, strength and frequency of the EMI signal, etc. However, using standard tests and
fixtures, it is possible to determine a value for the attenuation. For 1345 tape, typical
shielding effectiveness (far field) is in the range of 75dB to 95dB (30 MHz to 1 GHz).
Specifications
3M™ Embossed Tin-Plated Copper Foil Tape 1345 shall be coated on one side with
pressure-sensitive adhesive, which shall not require heat, moisture or other preparation
prior to or subsequent to application. The adhesive coating shall be smooth and uniform
and be free of lumps and bare spots. There shall be no separator between adjacent layers
of the roll. The tape shall perform at a temperature of -40F° (-40°C) to 266°F (130°C)
without substantial loss of tensile or electrical properties.
1 of 2
3
3M™ Embossed Tin-Plated Copper Foil Tape 1345
Not for specifications. Values are typical, not to be considered minimum or maximum. Properties measured
at room temperature 73°F (~23°C) unless otherwise stated.
Typical Properties
Property (Test Method)
Color
Adhesive
Type of Backing
Backing Thickness
Total Thickness (ASTM D1000)
Electrical Resistance1
Flame Retardancy2
Breaking Strength (ASTM D3759)
Adhesion Strength (ASTM D3330)
Temperature Range
Shielding Effectiveness ( ASTM 4935)
1.
2.
Typical Value
US units (metric)
Tin (foil may have a slight color variation)
Acrylic
Tin–Plated Copper
1.4 mil (0.04 mm)
4.0 mils (0.101 mm)
0.001 Ω
Pass
25 lbs/in (44N/10 mm)
45 oz/in (4.98N/10 mm)
-40ºC to +130ºC
75dB to 95 dB, 30 MHz to 1 GHz
Mil-STD-202 Method 303 maintained at 5 psi (3.4N/cm2) measured over 1 in2
surface area. The edges of the embossing pattern in the foil backing
penetrate through the nonconductive adhesive to make metal-to-metal
contact with the application substrate.
UL Recognized for flame retardancy per UL 510, Product Category OANZ2,
File E17385
Shelf Life
& Storage
This product has a 5-year shelf life from date of manufacture when stored in a
humidity controlled storage (10°C/50°F to 27°C/80°F and <75% relative humidity).
Availability
This 1345 Tape is available in 1/4” to 23” widths, standard length is 18 yards, longer
lengths are available. Check with Customer Service.
Please contact your local distributor; available from 3M.com/electrical [Where to
Buy] or call 1-866-357-2737 or call 1-800-245-3573.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to the product, which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order, shall have no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited
Remedy; Limited
Liability
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M is a trademark of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
866 676 8381
FAX: 800 828 9329
www.3M.com/oem
Please recycle
© 3M 2014 All rights reserved
78-8124-4709-8 Rev C
2 of 2