LED Indicator/Indicator-position-light
Ø 110 mm ( 959 932-...)
Front
Rear
Brief
Information
! LED light for front and rear installation
! Multi-voltage from 9–33 V
! Long service life with lower power consumption
Product features
Power-Top LED
Optimum light output thanks to the combination of highpower LEDs and precision lenses. 16 LEDs for the indicator
or 15 LEDs for the indicator and one for the position light.
Long service life and low energy consumption
Thanks to innovative LED technology and optimum thermal
management, a long service life is achieved for the light.
Low energy consumption and no maintenance costs –
“Fit and Forget” – make this product the perfect
environmentally friendly light.
Indicator failure check
This light can be used in line with the ECE-R48 requirement
thanks to the indicator monitoring system patented by Hella.
Overvoltage protection
Overvoltage protection ensures that the lamp is not damaged
even with voltage peaks acc. to ISO 7637.
Attractive design
The choice between an amber or clear lens for the direction
indicator allows the light to be harmoniously integrated into the
vehicle design. The high-efficiency Fresnel lens pattern permits
optimum use of the LED‘s luminous flux.
High water resistance
Tested to Hella norm IP 6K6 and IP 6K7, the light guarantees
absolute water resistance.
Ideas today for
the cars of tomorrow
LED lighting technology
As a leader in innovation in the field of automotive original
equipment, Hella sets standards also with products in LED
lighting technology.
An overview of the advantages of modern LED lighting
technology:
Extremely low energy consumption
Thanks to the combination of efficient light-emitting diodes
(LEDs) and precision lenses, the Hella signal lamps achieve
the legally prescribed light distribution – despite using 87 %
less power than light bulb versions.
No light source replacement, no maintenance and
extremely long service life thanks to proficient
thermal management
To increase light service life, all components are perfectly
aligned with each other optimised for temperature. This will
avoid overloading the LEDs at high ambient temperatures.
Using quality LEDs and good thermal management, these
products are designed for endurance throughout the service
life of the vehicle thus representing a convincing, economic
and environmentally friendly “Fit and Forget” solution.
compensates voltage fluctuations which arise through the
use of long cables and plug-connections within the vehicle
electric system. Furthermore, Hella Multivolt circuits are
protected from inverse polarity and voltage peaks – even at
low battery voltages.
Indicator failure check
The indicator function is monitored by the electronics. This
generates a current pulse at a defined time for the indicator
input. For every flashing pulse, the flasher unit ballast in the
vehicle electric system demands this pulse for at least 107 ms
every 100 ms. If components or LEDs in the indicator function
are faulty, this is detected by the electronics:
No pulse is sent. This way, the driver is always informed about
the indicator failure. This meets the legal requirement for
indicator failure detection (according to ECE regulation).
The following three ballasts cover almost all application cases:
5 DS 009 552- ...
5 DS 009 602- ...
4 DW 009 492- ...
Connection: Flasher light signal function of this light can be
contacted with or without pulse HCS (Hella Compatibility
Solution).
LED Multivolt technology
Multivolt circuits keep the light output constant over a voltage
range of 9 to 33 Volts. This makes it possible to use the same
Hella signal lamp for 12 and 24 Volt applications. Multivolt also
Comparison of the performance of bulb-based
and LED light
31
Position light
Indicator
Total
(specifications in Watts)
21
87%
saving in power consumption
10
3
1
Bulb-based light
LED-based light
4
Technical details
Technical data
Type approval
Technical drawing
ECE, GGVS/ADR
Indicator Cat. 1 optional 2a
Hole pattern
Function
Indicator:
Amber lens: 16 white LEDs
Clear lens: 16 amber LEDs
Position light:
Clear lens:
Indicator 15 amber LEDs,
Position light 1 white LED
Failure check
HCS self-monitoring integrated in flasher light
signal, to be contacted as required
Specification
Hella Norm 67101 Class 10
Current consumption
Position light: 1 W
Indicator: 3 W
Operating voltage
9–33 Volt DC
Overvoltage protection
1000 V (acc. to ISO 7637)
Cable colours
Inverse polarity
protection
yes (up to -1000 V)
Colour
Connection
White
Minus (-)
Operating temperature
-40 °C to +60 °C
Yellow
Direction indicator without pulse for failure check (HCS)
Brown
Position light
Blue
Direction indicator with pulse for failure check (HCS)
Protective category
EMV approval
IP 6K6/IP 6K7
03 1680
Service life
min. 30,000 h*
(*depending on the ambient temperature)
Attachment
3 screws Ø 4 x 15 mm
Direction indicator according to ECE Cat. 1 and 2a
Front indicator
Category
1, 1a oder 1b
Category
2a
Category
Distance to low beam/fog
light
Light intensity
Direction
1
> 40 mm
min. 175 cd
forwards
Rear indicator
Application examples
Category
Remarks
Light intensity
Direction
2a
The same light intensity for
day and night
min. 50 cd,
max. 200 cd
To the rear
Range overview
Product picture
Type
approval
Packaging
unit
2BA 959 932-011
LED indicator
for installation on the front and rear of
the vehicle, amber lens,
200 mm cable with open ends
ECE,
E24_0023
GGVS /ADR
1
2BA 959 932-051
LED indicator
for installation on the front and rear of
the vehicle, clear lens,
200 mm cable with open ends
ECE,
E24_0023
GGVS /ADR
1
2BE 959 932-131
LED indicator-position light
for installation on the front of the
vehicle, clear lens,
200 mm cable with open ends
ECE,
E24_5581
GGVS /ADR
1
Part Number
Specification
Screws with cover caps included in scope of supply
The individual functions of the light must only be operated using a vehicle-mounted fuse of max. 3 A.
Outlook
ECE, with chrome edge:
SAE, with and without chrome edge:
LED indicator,
yellow lens
2BA 959 932-401
LED indicator,
yellow lens
2BA 959 932-041
LED indicator,
clear lens
2BA 959 932-081
LED indicator,
clear lens, with chrome edge
2BA 959 932-421
LED indicator-position light
clear lens
2BE 959 932-161
Hella KGaA Hueck & Co.
Rixbecker Straße 75
59552 Lippstadt/Germany
Tel.: +49 2941 38-0
Fax: +49 2941 38-7133
www.hella.com
Ideas today for
the cars of tomorrow
© Hella KGaA Hueck & Co., Lippstadt 9Z2 999 128-527 TT/10.09./0.2 Printed in Germany
The following versions can be approved if required!