Manual for 15W x 2CH Amplifier with IR Remote

Stereo Amplifier w/IR Remote
Model # 50-14 8 02
 Provides manual or remote volume control.
 Power standby(red) / ON(green) indicator.
 Provides 3 IR path remote control:
*IR sensor(front) *IR receiver(rear) *Support IR repeater system(rear)
 Convenient IR confirmation LED.
 Support muting function.
 Provides volume level indicator.
 Large detachable terminal block (supplied) for quick and easy installation.
 Screw terminals handle wire sizes from 24 to 12 gauge.
 Amplifier Type:Stereo Class-D
 Output power:15W(rms) per channel (@ RL=4 ohm)
 THD+N :0.06 % (@ 8ohm, 1K Hz)
 Minimum Load Resistance :4 ohm
 Includes Speaker Protection circuit.
 Power Requirements: 12VDC, 2A
 Dimensions: 1.6" (H) x 5.7" (W) x 3.8" (D)
Distributed Ex clusively by:
MCM Electronics
50-14850 kit
For complete flexibility in operating this amplfier from remote locations, using the included
IR remote control, use the optional accessories shown above (not included).
See for complete information on the follwoing items:
50-14877 - Surface mount IR receiver target (shown)
50-14878 - Brass tube mount IR receiver target
50-14880 - Keystone wallplage mount IR receiver target
50-14876 - Decora style wall plate IR receiver target
50-14850 - Complete active IR repeater kit (shown)
24-810 - 6' connecting cable (shown)
This device is warranted against manufactures defects for a period of 1 year from the original date of
purchase. This warranty covers all internal components and the cost of labor to either repair or replace
the unit. This warranty covers only the unit, and does not cover connected equipment, or any loss that
may occur, regardless of cause. It willbe the sole discretion of MCM Electronics to determine the
applicability of said warranty, anddetermination as to whether the unit willbe repaired or replaced.
Questions regarding application, use, or problems with this unit should be directed to MCM Electronics
Tech Support, which can be foundat