PROJECT INFORMATION
MILLENIUM™ DOWNLIGHTS
Job Name
Fixture Type
HADL SERIES – CFL
Catalog Number
PRODUCT FEATURES:
Approved by
»» Recessed ceiling mount – 6" & 8" aperture; vertical or
horizontal lamp position compact fluorescent
»» Peace of Mind Guarantee® against breakage
»» UL certified IP65 per IEC 60598
HOUSING: .050" aluminum. Fully enclosed and sealed. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
REFLECTOR: Aluminum with clear specular low iridescent anodized finish. See Ordering Information for other finishes.
TRIM: 6" Aperture: 18-gauge CRS. 8" Aperture: 16-gauge CRS. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Trim secured to housing with captive flush
mounted Torx® stainless steel fasteners. See Ordering Information for other materials/finishes.
LENS: As specified – maximum thickness .625"– see ordering information. Sealed to trim with continuous lens retention system. Smooth side out lens orientation.
ELECTRICAL: Fluorescent electronic 120/277V ballasts high power factor (<10% THD). See Ordering Information for optional equipment.
INSTALLATION: Adjustable mounting brackets for use with conduit or c-channel (by others).
PHOTOMETRICS: Efficiency of HADL6VF-1-32P-RS-DV-2FW-PAH-CS-G = 52%; S/MH = 1.1,1.1. Efficiency of HADL6VF-1-32P-RS-DV-2FW-PAH-CS-G = 52%; S/MH = 1.1,1.1. Efficiency of
HADL8VF-1-32P-RS-DV-2FW-PAH-CS-G = 59%; S/MH = 1.2,1.2. Efficiency of HADL6HF-1-32P-DV-2FW-PAH-CS-G = 58.9%; S/MH = 1.3,1.3. For photometric information, go to www.kenall.com.
LISTINGS: UL and CUL Listed for through branch circuit wiring. UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA Approved. IC Rated (32 Watt maximum).
IP65
CCEA
Approved
IC
Rated
ORDERING INFORMATION (Ex: HADL8HF-1-26Q-RS-DV-5BR-PAH-CS-G-FS)
Model
Lamp Qty/Type
Ballast Type
Voltage
Trim
Housing
Reflector Finish
Lens Type
Options
Accessory
PAH
Model
HADL6VF 6" Aperture Vertical
HADL8VF 8" Aperture Vertical
HADL6HF 6" Aperture Horizontal
HADL8HF 8" Aperture Horizontal
Voltage
120 120 Volts (DM10 only)
277 277 Volts (DM10 only)
DV 120-277 Volts
347 347 Volts (n/a with DM7 or DM10 ballast)
Lamp Quantity/Type
Vertical Lamps
1-13Q• One 13 Watt Quad (6"only)
1-18Q One 18 Watt Quad
1-26Q One 26 Watt Quad
1-18P One 18 Watt PLT
1-26P One 26 Watt PLT
1-32P One 32 Watt PLT
1-42P One 42 Watt PLT
Horizontal Lamps
1-13Q• One 13 Watt Quad (6" only)
2-13Q• Two 13 Watt Quads (6" only)
1-18Q One 18 Watt Quad
2-18Q Two 18 Watt Quads
1-26Q One 26 Watt Quad
2-26Q Two 26 Watt Quads
1-18P One 18 Watt PLT
2-18P Two 18 Watt PLT (8" only)
1-26P One 26 Watt PLT
2-26P Two 26 Watt PLT (8" only)
1-32P One 32 Watt PLT
1-42P One 42 Watt PLT
Trim
DCFW
DCFB
2FW*
2FB*
5BR*
5FW*
5FB*
2FCC*
5FCC*
Die-Cast Aluminum Flat White
Die-Cast Aluminum Flat Black
CRS Flat White
CRS Flat Black
Type 304 SS Brushed
Type 304 SS Flat White
Type 304 SS Flat Black
CRS Custom Color (Consult Factory)
Type 304 SS Custom Color (Consult Factory)
Lens Type
Polycarbonate
2
.125" #12 Prismatic
G
.125" Clear
6
.187" #12 Prismatic
9
.250" Clear
Tempered Glass Lens**
R
.156" C73 Prismatic
8
.187" Clear
Specified Lens
SL Specified Lens
**Supplied with .125" clear
polycarbonate outer lens
Options
BB Black Baffle
CEL Cold Weather (0°F) EL Pack
(n/a with 347V)
EL Standard Lumen EL Pack
FS Fuse & Holder
PEL High Lumen EL Pack
PH Phillips Head Fasteners
WW Single Wallwash
*6" trim uses 18-Ga (CRS/Type 304 SS)
*8" trim uses 16-Ga (CRS/Type 304 SS)
Housing
PAH .050" Painted Aluminum
Reflector Finish
CS Clear Specular (STD)
CSS Clear Semi-Specular
CG Champagne Gold
Accessory
9500Torx® Screwdriver
• n/a with DM7 or DM10 ballast
Note: 6"Aperture fixtures IC rated only;
maximum 32 system watts.
Ballast Type
RS
Rapid Start Electronic <10% THD
DM7 Low Voltage Electronic Dimming Ballast
DM10 Line Voltage Electronic Dimming Ballast
(must specify 120V or 277V)
SB
Specified Ballast
www.kenall.com
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
HADL_VF_HF-111113
For additional photometry, go to www.kenall.com
MILLENIUM™ DOWNLIGHTS
HADL SERIES – CFL
DIMENSIONAL DATA
CROSS SECTION – Horizontal
CROSS SECTION – Vertical
BOTTOM VIEW
D
D
C
C
A
Aperture
A
Aperture
B
E
1.375"
max ceiling
B
1.375"
max ceiling
F
DIMENSIONAL DATA (IN INCHES)
A BC D E F
HADL6VF6.38
8.63 10.58 16.13
HADL8VF8.38
10.63 12.58 16.13
HADL6HF6.38
8.63 6.08
17.00
HADL8HF
8.3810.63
8.0817.00
19.60 16.13
19.60 16.13
21.60 18.12
25.35
21.87
RECOMMENDED CEILING CUTOUT:
6" Aperture
8" Aperture www.kenall.com
8.125" Dia.
10.125" Dia.
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
HADL_VF_HF-111113