10–120
Three-Phase Energy Analyzer, Three-Phase Power Logger
Fluke
Three-Phase
Energy
Analyzer
Part No.
Features
0721102
Measurement
range
Volt
Vrms (ac+dc)
1 V to 1000 V phase
to neutral
Voltage Crest Factor (CF)
1.0 > 2.8
Amps (accuracy excluding clamp accuracy)
Amps (ac +dc)
5 A to 6000 A
0.5 A to 600 A
A Crest Factor (CF)
1 to 10
Hz
@ 50 Hz nominal
42.50 Hz to
57.50 Hz
@ 60 Hz nominal
51.00 Hz to
69.00 Hz
Power
Watts (VA, var)
max 6000 MW
Power factor
0 to 1
Energy
kWh (kVAh, kvarh)
Energy loss
Harmonics
Harmonic order (n)
ElEctrical
Phase Angle
Unbalance
Volts
Amps
Depends on clamp
scaling and V
nominal
Depends on clamp
scaling and V
nominal
Accuracy
± 0.5% of nominal
voltage
±5%
± 0.5% ± 5 counts
± 0.5% ± 5 counts
±5%
± 0.01 Hz
± 0.01 Hz
± 1% ± 10 counts
± 0.1% @
nominal load
± 1% ± 10 counts
Part No.
Input Characteristics
Input impedance
Voltage rating
Volt/Amps/Hertz
True-rms voltage (AC+DC)
True-rms current (AC+DC)
Frequency
CF Crest Factor
Power
W, VA, VAR Reactive Power 1-phase
and 3-phase, 3 conductor balanced
loads
PF Power Factor
DPF Displacement Power Factor
Hz Frequency fundamental
Harmonics
Volts, Amps, Watts
± 0.1 %
±1%
0712553
Ranges
1 MΩ, 20 pF
600 Vrms, CAT III
Accuracy
5.000 V, 50.00 V, 500.0 V,
1250 V*
50.00 A, 500.0 A, 5.000 kA,
50.00 kA, 1250 kA
10.0 Hz to 15.0 kHz
1.0 to 10.0
± (1 % + 10 counts)
± (0.5 % + 2 counts)
± (5 % + 1 count)
250 W 2.50 kW, 25.0 kW,
250kW, 2.50 MW, 25 MW, 250
MW, 625 MW, 1.56 GW
0.00 to 1.00
0.00 to 0.25
0.25 to 0.90
0.90 to 1.00
40.0 to 70.0 Hz
± (2 % + 6 counts) Total Power
1-phase and 3-phase, 3 ± (4 %
+ 4 counts) Fundamental Power
± 0.04
not specified
± 0.04
± 0.03
± (0.5 % + 2 counts)
Fundamental
V, A ± (3 % + 2 counts),
W ± (5 % + 2 counts)
V, A ± (5 % + 3 counts),
W ± (10 % + 10 counts)
V, A ± (15 % + 5 counts),
W ± (30 % + 5 counts)
± 0.25 Hz
2nd (± 3°) … 51st (± 15°)
± (1 % + 10 counts)
32 to 51st Harmonic
Frequency of fundamental
Phase
K-Factor(Amps&Watts)
THD
Sags & Swells
Recording times (selectable)
Vrms actual, Vrms max,
Arms actual, Arms max,
min (AC + DC)
If you can’t find it on our
shelves or in our catalog,
we’ll make it for you at
one of our manufacturing
locations
43B
2 to 31st Harmonic
± 1% ± 10 counts
Excluding line resistance accuracy
DC, 1 to 50 Grouping: Harmonic groups
according to IEC 61000-4-7
0.0 % to 100 %
±5%
-360° to +0°
± n x 1°
0.0 % to 20.0 %
0.0 % to 20.0 %
Fluke
Three-Phase
Power Logger
434-II
Recording
Recording times (selectable)
Parameters
V/A/Hz
Power
Harmonics
Ohms
Temperature
Scope
Transients
Minimum pulse width
Useful bandwidth input
Number of transients
Voltage threshold settings
40 Hz to 70 Hz
Volt&Amps(betweenFund.&
Harmonic)
Watts(betweenVoltFund.&
Amps Harmonic )
1.0 to 30.0
0.00 to 99.99
Fund (± 5°) … 51st (± 15°)
± 10 %
± (3% + 8 counts)
4 min to 16 days
5.000 V, 50.00 V 500.0 V,
1250 V*
50.00 A, 500.0 A, 5.000 kA,
50,00 kA
Readings ± (2 % +10 counts)
min (AC + DC) Cursor readings
± (2 % + 12 counts)
Cursor Readings Average
± (2 % +10 counts)
4 min to 16 days
Choose one or two parameters from one of the groups below
Line Voltage, Current, Frequency
Watts, VA, VAR, PF, DPF, Frequency
THD,Volts(Fund.&Harmonic),Amps(F&H)Watts(F&H)Freq.(H),
%(H) of total, Phase(H), KF
Ohms, Diode, Continuity, Capacitance
°C or °F
DC Voltage, DC Current, AC Voltage, AC Current, Frequency,
Pulse Width + or -, Phase, Duty cycle + or -, Peak max, Peak min,
Peak min-max, Crest Factor
40 ns
DC to 1 MHz (with test leads TL24)
40
20 %, 50 %, 100 %, 200 % above or below reference signal
For pricing and availability, contact your local Fastenal store or visit fastenal.com