Package Drawing
Designator: LD
Type: 38-pin, 0.50 mm pin pitch TSSOP
9.70±0.10
8º
0º
38
0.20
0.09
4.40±0.10
NNNNNNNNNNNNN
YYWW
LLLLLLLLLLLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1 2
0.25 BSC
Branded Face
38X
SEATING
PLANE
0.10 C
0.27
0.17
0.50 BSC
1.20 MAX
0.15
0.00
SEATING PLANE
GAUGE PLANE
C
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Lot number
For Reference Only; not for tooling use (reference MO-153 BD-1)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LE
Type: 8-pin, 0.65 mm pin pitch TSSOP
8º
0º
3.00±0.10
8
6.40 BSC
0.20
0.09
4.40±0.10
NNN
YYWW
0.60 +0.15
–0.10
A
1
1.00 REF
B
1
2
0.25 BSC
Branded Face
8X
SEATING
PLANE
0.10 C
0.30
0.19
0.65 BSC
C
SEATING PLANE
GAUGE PLANE
Standard Branding Reference View
N = Last 3 digits of device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
Branding scale and appearance at supplier discretion
1.10 MAX
0.15
0.05
For Reference Only; not for tooling use (reference MO-153 AA)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LE
Type: 20-pin, 0.65 mm pin pitch TSSOP
6.50±0.10
8º
0º
20
0.20
0.09
4.40±0.10
NNNNNNNN
YYWW
LLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1
2
0.25 BSC
20X
SEATING
PLANE
0.10 C
0.30
0.19
SEATING PLANE
GAUGE PLANE
C
For Reference Only; not for tooling use (reference MO-153 AC)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
1.20 MAX
0.65 BSC
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Characters 5-8 of lot number
0.15
0.00
A Terminal #1 mark area
B
Branding scale and appearance at supplier discretion
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LG
Type: 38-pin, 0.50 mm pin pitch TSSOP with internally fused pins for thermal dissipation
9.70±0.10
8º
0º
38
0.20
0.09
4.40±0.10
NNNNNNNNNNNNN
YYWW
LLLLLLLLLLLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1 2
0.25 BSC
Branded Face
38X
SEATING
PLANE
0.10 C
0.27
0.17
0.50 BSC
1.20 MAX
0.15
0.00
SEATING PLANE
GAUGE PLANE
C
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Lot number
For Reference Only; not for tooling use (reference MO-153 BD-1)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
Internal configuration of fused pins is device-dependent
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LP
Type: 16-pin, 0.65 mm pin pitch TSSOP with exposed thermal pad
5.00±0.10
8º
0º
16
0.20
0.09
C
3
4.40±0.10
NNNNNNN
YYWW
LLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1
2
3
0.25 BSC
Branded Face
16X
SEATING
PLANE
0.10 C
0.30
0.19
SEATING PLANE
GAUGE PLANE
C
For Reference Only; not for tooling use (reference MO-153 ABT)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
1.20 MAX
0.65 BSC
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Characters 5-8 of lot number
0.15
0.00
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
C
Exposed thermal pad (bottom surface); dimensions may vary with device
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LP
Type: 20-pin, 0.65 mm pin pitch TSSOP with exposed thermal pad
6.50±0.10
8º
0º
20
0.20
0.09
NNNNNNN
YYWW
LLLL
C
3.00
4.40±0.10
6.40±0.20
1
0.60 ±0.15
A
1
1.00 REF
2
4.20
SEATING
PLANE
0.10 C
0.30
0.19
SEATING PLANE
GAUGE PLANE
C
For Reference Only; not for tooling use (reference MO-153 ACT)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
1.20 MAX
0.65 BSC
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Characters 5-8 of lot number
0.25 BSC
20X
B
0.15
0.00
A Terminal #1 mark area
B
Branding scale and appearance at supplier discretion
C Exposed thermal pad (bottom surface); dimensions may vary with device
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LP
Type: 24-pin, 0.65 mm pin pitch TSSOP with exposed thermal pad
7.80±0.10
8º
0º
24
0.20
0.09
C
3
4.40±0.10
NNNNNNNNNN
YYWW
LLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1
2
4.32
0.25 BSC
Branded Face
24X
SEATING
PLANE
0.10 C
0.30
0.19
0.65 BSC
SEATING PLANE
GAUGE PLANE
C
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Characters 5-8 of lot number
For Reference Only; not for tooling use (reference MO-153 ADT)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
1.20 MAX
0.15
0.00
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
C
Exposed thermal pad (bottom surface); dimensions may vary with device
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com
Package Drawing
Designator: LP
Type: 28-pin, 0.65 mm pin pitch TSSOP with exposed thermal pad
9.70±0.10
8º
0º
28
0.20
0.09
C
3
4.40±0.10
NNNNNNNNNN
YYWW
LLLL
6.40±0.20
0.60 ±0.15
A
1.00 REF
1
B
1
2
5.08
0.25 BSC
Branded Face
28X
SEATING
PLANE
0.10 C
0.30
0.19
0.65 BSC
SEATING PLANE
GAUGE PLANE
C
Standard Branding Reference View
N = Device part number
= Supplier emblem
Y = Last two digits of year of manufacture
W = Week of manufacture
L = Characters 5-8 of lot number
For Reference Only; not for tooling use (reference MO-153 AET)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
1.20 MAX
0.15
0.00
A Terminal #1 mark area
B Branding scale and appearance at supplier discretion
C
Exposed thermal pad (bottom surface); dimensions may vary with device
Copyright ©2008-2013, Allegro MicroSystems, LLC drawings are for reference only; not for tooling use. Refer to the individual datasheet for information on a specific product package. Allegro MicroSystems, LLC reserves
the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the
user is cautioned to verify that the information being relied upon is current. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, LLC assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000
For the latest version of this document, visit our website:
www.allegromicro.com