PowerWhite Driver
LED Driver
A universal input LED
driver with high-voltage
DC output, delivering a
total output power of 60W,
ideal for industrial LED
lighting solutions.
Features / Benefits
Ø Universal Input
Ø High O/P Power
Ø 2 x Output LED
-
90V to 264Vac input range.
-
20W - 60W power output range.
Currents
High Reliability -
350mA 700mA drive current
(typ: 45 @ 350mA, 24 @ 700mA)
No electrolytic capacitors
-
Used in high ambient
temperature applications.
LED thermal feedback protection.
Ø
Ø Thermal
Stability
LifesaverTM
Ø
Ø High Power Factor
Ø IP67 Rated
Ø Sturdy Casing Ø ATEX Pending -
Typical Application
Hazardous Area Lighting
Fully encapsulated construction.
Fully Diecast Enclosure.
ATEX approval pending for
hazardous area lighting.
Mechanical Specification
Applications
Applications
Ø Roadway Lighting
Ø Tunnel Lighting
Ø Hazardous Area Lighting
Ø Signage Illumination
Ø Architechtural and Display Lighting
Ø Any application demanding High Power, High
Size
Finish
Internal
Fixing Method
I/P Cable Length
O/P Cable Length
191mm x 53mm x 33mm
Anodised Aluminium
Encapsulated to IP67
4 x M3 Screws
300mm
300mm
53.0 mm
Reliability, Long Life and Rugged Construction
Environmental
Power-White Driver Datasheet - Iss-B 17-10-07
-10°C to +80°C
-10°C to +85°C
-40°C to +100°C
IP67
50K Hours
191.0 mm
33.0 mm
Operating Ambient Temp.
Operating Case Temp.
Ambient Storage Temp.
Ingress Protection
MTBF (@50°C)
Dimensions
Typical Connection
Input (3-Core + Earth Bond)
Output (6 Numbered + Earth)
Wire 1
Earth Bond
Wire 2
Brown
Wire 3
Grn/Yel
Earth
Neutral
Grn/Yel
(Housing)
SEC
Blue
Wire 4
Link for 700mA
N
PRI
Live
Wire 5
Wire 6
Brown
SEC
Grn/Yel
www.lumidrives com
F
!
!
Grn/Yel
(Housing)
LifeSaver® Thermal Protection
LED - Cathode
Earth Bond
Luminaire Frame
LED - Anode
Link for 700mA
Blue
PRI
N
Earth - Luminaire Frame
Wire 4
Wire 1- Link for 700mA
Earth
B01-PWD60-35-70
Constant Current LED Driver
5 x Power-White Modules linked in series
Electrical Specification
Wire Description
Input
Input
Voltage (Vin)
Frequency (f)
Power Factor ( )
Input Current (Iin)
Line Current
Inrush Current
90Vac to 264Vac
50 / 60Hz
0.95
1.2 Amps max.
Active Control
<2 Amps
Brown
Blue
Green
Separate Green/Yellow
Output
y
Wire 1
Output
Voltage Range
Maximum Power
Minimum Power
Output Current (Iout)
No. Of LEDs
Output Control
Power Supply Protection
LED Protection
Connection
90Vac to 264Vac Live
Neutral
Mains Earth
Earth Bonding
55Vdc - 180Vdc (1)
60W
20W
350mA ±5% (Pre-Set)
700mA ±5% (Pre-Set)
17 to 48 @ 350mA
8 to 26 @ 700mA
Constant Current
Over-Temp. Cut Off
Open-Circuit Cut Off
Thermistor Circuit (1)
Wires
Wire 2
Wire 3
Wire 4
Wire 5
Wire 6
Green/Yellow
Current Select
(Connect this to Wire 2 for)
(700mA Output. Not used )
(if 350mA required.
)
LED Anode (Series LEDs)
LED Cathode (Series LEDs)
PWM Input - Not Used
Thermistor +
Thermistor (Thermistor feedback from)
(LED PCB - Should be 10k )
(NTC Type.
)
Earth Bond - Luminaire
Frame
Product Code and Description
B01-PWD60-35-70
Power-White Driver 350 / 700mA
Dialight-Lumidrives Ltd. reserves the right to make changes to this product at any time in order to supply the best possible product.
Dialight-Lumidrives Ltd. - York House - Wetherby Road - Long Marston - York - YO26 7NH - UK - Tel: +44 (0)1904 739150 - Fax: +44 (0)1904 737926 - www.lumidrives.com
Dialight Corporation - 1501 Route 34 South - Farmingdale - NJ - 07727 - USA - Tel: (1) 732 919 3119 - Fax: (1) 732 751 5778 - www.dialight.com