LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
M-2 HIGH SPEED STEEL PERFORATORS
All designs can be configured
to customer specifications
– including metric.
Standard products ship in
about 24 hours, most custom
orders in 2 to 3 weeks.
When it comes to shape,
size and finish, no other
component manufacturer
offers you more.
Since 1965, moldmakers, stampers, cold
heading, eyelet manufacturers, medical
component manufacturers and industrial and
electronics manufacturers worldwide have
relied on the full range of resources available
from the Precision Punch Corporation. From
small prototypes to large volume orders, each
piece is meticulously engineered to exact
customer specifications. With over 60% of our
business being generated from custom design
orders we know what it takes to successfully
comprehend the specific expectations of
designers, CAD operators and engineers.
Best of all, our on-site, experienced technical
team is always available to assist our
customers with the simplest sketch through
the most intricately engineered component.
Our know-how and many years of interactive
experience have taught us how to keep quality
at the highest levels... and your cost low.
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Form Ground • Rc 60/63
Style A
1
2
3
Locate your
Order#
and P.O.#
At www.ppunch.com go to Shipment Tracking button.
D
Diameter
.001”
increments
2”
21/2”
3”
4”
6”
8”
.010 - .014
3.87
–
–
–
–
–
.015 - .019
3.19
–
–
–
–
–
.020 - .029
2.58
–
–
–
–
–
.030 - .055
–
2.15
–
–
–
–
.056 - .087
–
2.60
2.96
5.12
9.35
–
.088 - .131
–
2.89
3.26
4.75
8.90 13.65
.132 - .179
–
3.09
3.45
4.94
9.17 13.99
.180 - .225
–
3.52
3.92
5.39
9.62 14.43
.226 - .250
–
4.16
4.54
5.97 10.01 14.88
L = Price by Length
Enter your Order# and P.O.# exactly as they appear.
+ .0003
*D
= - .0000 If greater than .250
and/or L (length) greater than 2.500
We accept
major credit cards
Registered Trademarks of Visa, MasterCard and American Express
QUALITY ASSURANCE, TERMS AND CONDITIONS
UNLESS OTHERWISE SPECIFIED, INDUSTRY STANDARD TOLERANCES WILL BE APPLIED.
Precision Punch Corporation guarantees the quality of base materials used and our workmanship according to customer specifications. The customer
is solely responsible for the design and accuracy of engineering specifications required for their intended application(s). We understand that our
products are often subject to continued operations, including re-work, processing, or other procedures beyond our control or influence. Therefore,
we do not assume any responsibility for our products post-delivery, once they have been subjected to any type of procedures or processes that may
affect in any way or form, physical or structural characteristics that may compromise the integrity of our products as delivered.
Quotation quantity is subject to ±10%. If you require an exact quantity, please discuss this with a Sales Representative to verify pricing.
Quotations are valid for 30 days. Quoted delivery time is based on receipt of Order (excludes weekends and Holidays). F.O.B. Berlin, CT USA.
Payment terms: NET 30 DAYS.
Precision Punch is a trademark of Precision Punch Corporation. All rights reserved. E/D
28
The contents of this catalog, including photos, illustrations, price lists and text can not be duplicated
electronically, or in print, whole or in part, without written consent from Precision Punch Corporation.
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 - .029 .030 - .125 .126 - .250
.30
.40
Price (each) On request
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
1 - 24 25 - 49 50 - 99 100 +
NET
5%
10%
Call
• Set-up charges
(shaded area only)
How to order: EXAMPLE
Style
A
Dia. Length Mat.
21/2
.126
M-2
3 - 4” = $25.00
6 - 8” = $30.00
Qty.
50
1
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
M-2 HIGH SPEED STEEL PERFORATORS
CUSTOM SHAPES
Form Ground • Rc 60/63
Style AB
Available on: PS _ and PE _ Punches and on D _ and H _ Dies
D
Diameter
.001”
increments
.010 - .014
.015 - .019
.020 - .029
.030 - .036
.037 - .046
.047 - .055
.056 - .064
.065 - .078
.079 - .087
.088 - .099
.100 - .120
.121 - .131
.132 - .147
.148 - .163
.164 - .179
.180 - .194
.195 - .210
.211 - .225
.226 - .241
.242 - .257
.258 - .272
.273 - .288
.289 - .304
.305 - .320
.321 - .336
.337 - .352
.353 - .368
.369 - .375
.376 - .436
.437 - .484
.485 - .562
.563 - .625
.626 - 1.000
H
T
1/32
1/16
1/32
1/16
3/64
1/16
1/16
1/16
5/64
1/16
3/32
5/64
7/64
5/64
1/8
5/64
9/64
3/32
L = Price by Length
21/2”
5/32
3/32
11/64
3/32
3/16
3/32
13/64
3/32
7/32
3/32
15/64
3/32
1/4
3/32
17/64
3/32
9/32
3/32
19/64
3/32
5/16
3/32
21/64
3/16
11/32
3/16
23/64
3/16
3/8
3/16
25/64
3/16
13/32
3/16
27/64
3/16
7/16
3/16
3/16
D
+.06
3/16
+.09
3/16
3/16
31/2”
(2” 3.87) 4.66 6.20
(2” 3.19) 3.87 5.34
(2” 2.58) 3.13 4.66
4.29
4.29
2.15
3.56
4”
6”
8”
—
—
8.35
—
—
7.74
—
—
7.06
—
—
6.37
5.89 10.79 17.73
5.53 10.36 16.57
16.32
5.12 9.35 15.67
15.05
2.60
3.32
2.89
3.56
4.75
8.90 13.65
3.09
3.81
4.94
9.17 13.99
3.52
4.32
5.39
9.62 14.43
4.92
5.97 10.34 15.37
4.62
5.45
6.44 11.27 16.51
5.01
5.82
6.76 11.67 16.89
6.07
6.89
7.74
8.79
7.19 8.27
8.51 9.67
9.94 10.80
11.66 12.67
On Request
4.16
4.16
3/16
13.19
14.71
15.44
17.34
18.49
20.08
20.87
22.77
NOTES TO ABOVE DRAWINGS:
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
.60
On request
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
2
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
• Set-up charges
21/ 2 - 4” = $25.00
(shaded area only) 6 - 8” = $30.00
How to order: EXAMPLE
Style
AB
Dia. Length Mat. Qty.
.126 21/2
M-2 50
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
How to order: Example
1. Corner Radius Style
Length Mat. Pt. Dim. (P x W) R Pt. Lng. Tol. Keying Qty.
• Inside: Punches & Dies - .003 to .008 (both)
1”
PSS18-50
#2
2D
4
21/4” 10-V .418 x .324 R .007
• Outside: Punches & Dies - Sharp (unless specified)
–
.420
x.326
R
.008
DS18-62
10-V
#2
2D
4
1”
2. Center line on drawings indicates center line of body diameter
• Pricing on request
27
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
M-2 HIGH SPEED STEEL PERFORATORS
NITRIDED EJECTOR PINS
Surface Hardness: Rc 64/74 • Core Hardness: Rc 41/45 • Shoulder Type
Style EPS-5
Style
D Diameter
EPS-5-046
L Length
6”
10”
14”
3/64
4.85
6.15
7.88
EPS-5-051
.005 3/64 O.S.
–
6.78
–
EPS-5-062
1/16
4.61
5.75
7.41
EPS-5-067
1/16 O.S.
–
6.41
–
.005
EPS-5-078
5/64
4.61
5.75
7.51
EPS-5-083
.005 5/64 O.S.
–
6.41
–
EPS-5-093
3/32
4.13
5.23
7.12
EPS-5-098
.005 3/32 O.S.
–
5.88
–
EPS-5-109
7/64
4.13
5.23
7.12
EPS-5-114
7/64 O.S.
–
5.88
–
.005
Style EPS-2
Style
D Diameter
EPS-2-046
3/64
L Length
6”
10”
14”
4.73
5.45
7.63
EPS-2-051
.005 3/64 O.S.
–
6.54
–
EPS-2-062
1/16
4.56
5.49
7.00
EPS-2-067
.005 1/16 O.S.
–
6.15
–
EPS-2-078
5/64
4.56
5.49
7.14
EPS-2-083
.005 5/64 O.S.
–
6.15
–
EPS-2-093
3/32
3.95
4.95
6.84
EPS-2-098
.005 3/32 O.S.
–
5.61
–
EPS-2-109
7/64
3.95
4.95
6.69
EPS-2-114
7/64 O.S.
–
5.61
–
.005
How to order: EXAMPLE
Style
EPS-5-046
26
Dia.
3/64”
Length
10”
Qty.
50
• When ordering please specify EPS-5 or EPS-2
• Specifications: H-13 hot work die steel; heads forged and annealed;
body nitrided; honed finish
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Form Ground • Rc 60/63
D
Diameter
.001”
increments
.010 - .014
.015 - .019
.020 - .029
.030 - .036
.037 - .046
.047 - .055
.056 - .064
.065 - .078
.079 - .087
.088 - .099
.100 - .120
.121 - .131
.132 - .147
.148 - .163
.164 - .179
.180 - .194
.195 - .210
.211 - .225
.226 - .241
.242 - .257
.258 - .272
.273 - .288
.289 - .304
.305 - .320
.321 - .336
.337 - .352
.353 - .368
.369 - .375
.376 - .436
.437 - .484
.485 - .562
.563 - .625
.626 - 1.000
L = Price by Length
H
T
1/32
1/16
1/32
1/16
3/64
1/16
1/16
1/16
5/64
1/16
(2” 3.87) 4.66 6.20
(2” 3.19) 3.87 5.34
(2” 2.58) 3.13 4.66
4.29
4.29
2.15
3/32
3/32
3.56
7/64
3/32
21/2”
1/8
3/32
9/64
3/32
5/32
3/32
11/64
3/32
3/16
1/8
13/64
1/8
7/32
1/8
15/64
1/8
1/4
1/8
17/64
1/8
9/32
1/8
19/64
1/8
5/16
3/16
21/64
3/16
11/32
3/16
23/64
3/16
3/8
3/16
25/64
3/16
13/32
3/16
27/64
3/16
7/16
3/16
3/16
+.06
D+.09
3/16
3/16
3/16
3/16
31/2”
4”
6”
8”
—
—
8.35
—
—
7.74
—
—
7.06
—
—
6.37
5.89 10.79 17.73
5.53 10.56 16.57
16.32
5.12 9.35 15.67
15.05
10”
12”
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.60
3.33
2.89
3.62
4.75
8.90 13.65
3.09
3.81
4.94
9.17 13.99 19.55 25.15
3.52
4.33
5.39
9.62 14.43 20.19 25.97
4.16
4.92
5.97 10.34 15.37 21.53 27.72
4.62
5.82
6.44 11.72 16.51 23.13 29.68
5.01
5.82
6.76 11.67 16.89 23.66 30.42
6.07
6.89
7.74
8.79
7.19 8.27 13.19
8.52 9.67 14.71
9.94 10.80 15.44
11.66 12.67 17.34
On Request
18.49
20.08
20.87
22.77
Style B
19.10 24.57
25.91
28.09
29.22
31.93
33.26
36.12
37.58
40.99
+ .0003
**D
= - .0000 If greater than .375
and/or L (length) greater than 2.500
or style BT.
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
.60
On request
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
• Shaded area - any .0001” increment - no charge
• Set-up charges
(shaded area only)
How to order: EXAMPLE
Style
B
Dia. Length Mat. Qty.
.126 21/2
M-2 50
21/ 2 - 4” = $25.00
6 - 8” = $30.00
10 - 12” = $50.00
3
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
NITRIDED EJECTOR PINS
CLOSE SPACE PUNCH BLANKS
Surface Hardness: Rc 64/74 • Core Hardness: Rc 41/45
M-2: Rc 60/63 • A-2: Rc 60/62 • PM-10V: Rc 61/63
Style CS-A
L
Length
21/2” Price
Style
CS-A
D
Dia.
CS-A - 06
.0625
3.27
4.96
CS-A - 09
.0938
3.60
5.48
CS-A - 12
.125
3.60
5.48
CS-A - 15
.1562
3.85
5.86
CS-A - 18
.1875
4.40
6.68
CS-A - 21
.2188
4.40
6.68
CS-A - 25
.250*
5.21
7.92
A-2 M-2
21/2 Only
PM-10V
Styles EP and EPO
Style
Style CS-B
Style
CS-AB
D
Dia.
CS-AB-06
.0625
7/64
5/64
CS-AB-09
.0938
5/32
3/32
CS-AB-12
.1250
3/16
3/32
CS-AB-15
.1562
7/32
3/32
CS-AB-18
.1875
1/4
3/32
CS-AB-21
.2188
9/32
3/32
CS-AB-25
.250
5/16
3/32
CS-AB-31
.3125
3/8
CS-AB-37
.375
7/16
Style
CS-B
D
Dia.
H
H
T
21/2”
Price
L
Length A-2 M-2 PM-10V
3.27
4.96
4.16
3.60
5.48
4.52
3.60
5.48
4.52
3.85
5.86
4.77
Standard
21/2 31/2
Cut to
length
(See
cut-off
charge
below)
M-2
6.68
5.41
4.40
6.68
5.41
5.21
7.92
6.15
3/16
5.78
8.78
6.83
3/16
6.27
9.51
7.28
T
CS-B - 06
.0625
1/8
1/8
CS-B - 09
.0938
5/32
1/8
CS-B - 12
.1250
3/16
1/8
CS-B - 15
.1562
7/32
1/8
CS-B - 18
.1875
1/4
1/8
CS-B - 21
.2188
9/32
1/8
Price
PM-10V
On
Request
21/2” Price
31/2” Price
L
Length A-2 M-2 PM-10V A-2 M-2 PM-10V
Standard
21/2 31/2
Cut to
length
(See
cut-off
charge
below)
3.27
4.96
4.16
6.32
3.60
5.48
4.52
6.88
3.60
5.48
4.52
6.88
3.85
5.86
4.77
7.23
4.40
6.68
5.41
8.22
4.40
6.68
5.41
8.22
5.21
7.92
6.15
9.35
3/16
5.78
8.78
6.83
10.36
3/16
6.27
9.51
7.28
11.07
CS-B - 25
.250
5/16
1/8
CS-B - 31
.3125
3/8
CS-B - 37
.375
7/16
Quantity Discounts
How to order: Example
Diameter .0625–.125 .1562–.375
Price (each)
.40
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
Style Length Mat. Qty.
M-2 50
CS-B-12 21/2
4
31/2”
4.40
Minimum Cut-off Charge $5.00
• Delivery from stock
Style EPO: .005 Oversize Ejector Pins
Style EP: Standard Ejector Pins
*.250 diameter T = 5/32
Style CS-AB
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
EP-04
EP-06
EP-07
EP-09
EP-10
EP-12
EP-14
EP-15
EP-17
EP-18
EP-20
EP-21
EP-23
EP-25
EP-26
EP-28
EP-29
EP-31
EP-32
EP-34
EP-35
EP-37
EP-40
EP-43
EP-46
EP-50
EP-56
EP-62
EP-68
EP-75
EP-87
EP-100
D
Dia.
H
T
3/64
1/4
1/8
1/16
1/4
1/8
5/64
1/4
1/8
3/32
1/4
1/8
7/64
1/4
1/8
1/8
1/4
1/8
9/64
1/4
1/8
5/32
9/32
5/32
11/64
11/32
3/16
3/16
3/8
3/16
13/64
3/8
3/16
7/32
13/32
3/16
15/64
13/32
3/16
1/4
7/16
3/16
17/64
7/16
1/4
9/32
7/16
1/4
19/64
1/2
1/4
5/16
1/2
1/4
21/64
9/16
1/4
11/32
9/16
1/4
23/64
5/8
1/4
3/8
5/8
1/4
13/32
11/16
1/4
7/16
11/16
1/4
15/32
3/4
1/4
1/2
3/4
1/4
9/16
13/16
1/4
5/8
7/8
1/4
11/16
15/16
1/4
3/4
1”
11/8
11/4
1/4
7/8
1”
1/4
1/4
L Length
6”
10”
14”
18”
4.88
4.55
4.55
4.11
4.11
2.25
2.60
2.33
2.78
2.43
–
2.61
–
2.79
–
3.26
–
3.59
–
4.03
–
4.25
4.70
5.16
6.63
6.17
7.63
8.84
11.64
12.33
26.97
28.25
6.14
5.87
5.49
4.61
4.61
2.50
2.67
2.61
2.84
2.79
3.11
3.10
3.40
3.47
3.99
4.15
4.38
4.61
4.92
5.16
5.50
5.73
6.39
7.02
7.70
8.37
10.41
12.21
14.40
16.54
31.72
31.72
–
–
–
–
–
3.13
3.64
3.36
3.76
3.71
3.99
4.12
4.40
4.38
4.79
4.92
5.50
5.50
6.42
6.51
6.96
7.02
8.27
8.95
12.81
11.00
13.25
15.38
20.31
21.06
53.89
62.45
–
–
–
–
–
7.23
6.89
4.68
–
4.86
–
–
–
5.61
–
6.58
–
7.23
–
–
–
9.48
10.89
12.15
13.42
14.53
17.31
19.97
23.56
26.95
76.11
80.80
• When ordering specify EP or EPO
• Specifications: H-13 hot work die steel; heads forged and annealed;
body nitrided; honed finish
Style
EPO-06
EPO-07
EPO-09
EPO-10
EPO-12
EPO-14
EPO-15
EPO-17
EPO-18
EPO-21
EPO-25
EPO-28
EPO-31
EPO-34
EPO-37
EPO-40
EPO-43
EPO-46
EPO-50
D
Dia.
H
T
1/16
1/4
1/8
5/64
1/4
1/8
3/32
1/4
1/8
7/64
1/4
1/8
1/8
1/4
1/8
9/64
1/4
1/8
5/32
9/32
5/32
11/64
11/32
3/16
3/16
3/8
3/16
7/32
13/32
3/16
1/4
7/16
3/16
9/32
7/16
1/4
5/16
1/2
1/4
11/32
9/16
1/4
3/8
5/8
1/4
13/32
11/16
1/4
7/16
11/16
1/4
15/32
3/4
1/4
1/2
3/4
1/4
L Length
10”
14”
6.84
6.84
6.00
6.00
2.81
3.03
2.94
3.22
3.14
3.48
3.78
4.25
4.70
5.33
5.95
6.69
7.30
7.96
8.76
–
–
–
–
3.34
–
3.71
–
3.97
–
4.85
–
6.12
–
7.69
–
9.78
–
11.68
How to order: EXAMPLE
Style
EP-06
Dia.
1/16”
Length
14”
Qty.
50
25
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
CORE PINS
STEPPED CLOSE SPACE PUNCHES
M-2: Rc 60/63 • A-2: Rc 60/62 • PM-10V: Rc 61/63
Styles SH and HH
Style CS-AP
Style SH: Standard Hardness, Rc 30/35
Style
D
Dia.
H
T
SH-09
3/32
1/4
1/8
SH-10
7/64
1/4
SH-12
1/8
SH-14
9/64
SH-15
L Length
D
Dia.
H
T
6”
10”
5.68
HH-09
3/32
1/4
1/8
5.02
5.24
6.17
5.07
6.01
HH-10
7/64
1/4
1/8
5.19
5.349
6.45
3.03
4.02
HH-12
1/8
1/4
1/8
3.14
3.31
4.24
2.98
3.09
4.02
HH-14
9/64
1/4
1/8
3.14
3.42
4.24
3.03
3.14
4.08
HH-15
5/32
9/32
5/32
3.31
3.42
4.24
3/16
3.03
3.14
4.24
HH-17
11/64
11/32
3/16
3.36
3.48
4.53
3/8
3/16
3.09
3.20
4.31
HH-18
3/16
3/8
3/16
3.36
3.58
4.53
3/8
3/16
3.14
3.31
4.36
HH-20
13/64
3/8
3/16
3.42
3.64
4.68
7/32
13/32
3/16
3.20
3.42
4.53
HH-21
7/32
13/32
3/16
3.48
3.70
4.68
SH-25
1/4
7/16
3/16
3.48
3.64
4.85
HH-25
1/4
7/16
3/16
3.75
3.97
5.07
SH-28
9/32
7/16
1/4
3.80
3.97
5.29
HH-28
9/32
7/16
1/4
4.14
4.36
5.68
SH-31
5/16
1/2
1/4
4.24
4.36
5.85
HH-31
5/16
1/2
1/4
4.58
4.75
6.29
SH-34
11/32
9/16
1/4
4.58
4.75
6.29
HH-34
11/32
9/16
1/4
4.97
5.24
6.95
SH-37
3/8
5/8
1/4
5.07
5.29
6.95
HH-37
3/8
5/8
1/4
5.46
5.73
7.61
SH-40
13/32
11/16
1/4
5.46
5.68
7.55
HH-40
13/32
11/16
1/4
5.85
6.23
8.27
SH-43
7/16
11/16
1/4
6.07
6.23
8.27
HH-43
7/16
11/16
1/4
6.51
6.84
9.09
SH-46
15/32
3/4
1/4
6.51
6.84
9.04
HH-46
15/32
3/4
1/4
7.06
7.44
9.98
SH-50
1/2
3/4
1/4
7.11
7.39
9.70
HH-50
1/2
3/4
1/4
7.61
8.05
10.75
SH-56
9/16
13/16
1/4
–
8.65
11.52
HH-56
9/16
13/16
1/4
–
9.43
12.57
SH-62
5/8
7/8
1/4
–
10.31
13.50
HH-62
5/8
7/8
1/4
–
11.03
14.89
SH-75
3/4
1”
1/4
–
14.06
18.52
HH-75
3/4
1”
1/4
–
15.21
20.40
4.75
4.90
1/8
4.90
1/4
1/8
2.98
1/4
1/8
5/32
9/32
5/32
SH-17
11/64
11/32
SH-18
3/16
SH-20
13/64
SH-21
How to order: EXAMPLE
24
Dia.
3/32”
Length
6”
Style CS-BP
L Length
Style
10”
3”
Style CS-ABP
Style HH: High Hardness, Rc 50/54
6”
Style
SH-09
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Qty.
50
• Delivery from stock
• Specifications: Air hardened hot work die steel; precision ground after heat treating;
heads forged and annealed
3”
Available On Request
All
Styles
-06
-09
-12
-15
-18
-21
-25
-31
-37
21/2” Price
31/2” Price**
P = Point Diam.
B = Std.
D
L
Dia. Length any .0001” incr. Point Length A-2 M-2 PM-10V A-2 M-2 PM-10V*
3/16
.031
.0625
Min.
7.35
9.57
8.24
10.93
1/4
.062
.0938 Standard
Min.
7.75
10.13
8.66
11.53
21/2 5/16
.093
.125
Min.
7.80
10.15
8.72
11.55
1
3 /2
3/8
.125
.1562 Cut to
Min.
8.11
10.58
9.02
11.97
7/16
.156
.1875 length
Min.
8.70
11.36
9.71
13.01
(See
1/2
.182
.2188 cut-off
Min.
8.76
11.64
9.78
13.19
9
.218
.250 charge
Min.
9.63
12.99
10.57
14.43
/16
5/8
.281
.3125 below)
Min.
10.25
14.05
11.30
15.62
5/8
.343
.375
Min.
10.79
15.02
11.81
16.56
Minimum Cut-off Charge $5.00
Diameter .0625 -.125 .1562 -.375
.30
.40
Price (each)
• Delivery: 1 to 3 days
• (*) CS-BP only
Quantity Discounts
1-5
6-24
$10 Set NET
25-49 50-99 100+
5%
10% Call
• (**) See page 4 for BLANK sizes available
How to order: Example
Length Mat. Pt. Dia. Qty.
Style
2”
CS-BP-06
A-2
.031 15
5
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PUNCH BLANKS
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
ECONOMY EJECTOR PINS
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
Style EC
Style PPB
Standard Lengths
Style
PPB
PPB - 12
PPB - 18
PPB - 25
PPB - 31
PPB - 37
PPB - 43
PPB - 50
PPB - 62
PPB - 75
PPB - 100
D
Dia.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
H
Dia.
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
11/8
T*
1/8
(3/16)
1/8 (3/16)
3/16 (1/8)
3/16 (1/8)
3/16 (1/8)
3/16
3/16
3/16 (1/4)
3/16 (1/4)
3/16 (1/4)
L = Length
” increm.
11/4 - 3
1
1 /4 - 31/ 2
11/4 - 31/ 2
11/4 - 4
11/4 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
1/4
Price
A-2
M-2
D-2
PM-M4
PM-10V
7.20
8.32
8.56
10.74
12.01
7.27
7.47
7.64
8.02
9.66
10.23
13.00
18.70
29.30
8.85
9.06
9.53
10.08
12.24
13.37
17.50
23.92
38.38
9.11
9.11
9.82
10.38
12.61
13.78
18.03
24.64
39.53
11.76
12.33
13.39
14.60
17.81
19.33
25.64
35.02
55.88
14.55
14.79
16.29
18.23
22.33
25.16
33.86
44.86
72.87
* PPBT: Optional (T) available in A-2 and M-2 only.
Extra Length 6” and 8”
Style
PPB
D
Dia.
H
Dia.
T = Head
Thickness
PPB - 12
PPB - 18
PPB - 25
PPB - 31
PPB - 37
PPB - 43
PPB - 50
PPB - 62
PPB - 75
PPB - 100
1/8
1/4
1/ 8
3/16
5/16
1/ 8
1/4
3/8
3/16
5/16
7/16
3/16
3/8
1/2
3/16
7/16
9/16
3/16
1/2
5/8
3/16
5/8
3/4
3/16
3/4
7/8
3/16
1
11/8
3/16
6” Price
A-2
M-2
A-2
M-2
12.60
12.73
13.06
13.38
14.05
16.91
17.90
22.75
32.74
51.25
14.53
15.19
15.84
16.68
17.65
21.44
23.39
30.64
39.14
67.15
16.76
16.92
17.23
17.80
18.69
22.49
23.79
30.27
43.53
68.17
19.34
20.59
21.07
22.20
23.46
28.51
31.11
40.75
55.68
89.31
Extra Length 10” and 12”
Quantity Discounts
How to order: Example
1-24 25-49 50-99 100+
10% Call
NET 5%
Style Length Mat. Qty.
M-2 50
PPB 25
3”
M-2 50
PPBT 12
3”
6
• (*) Optional T (PPBT) A-2 and M-2 only
• Delivery from stock
8” Price
(available on request)
Style
D
Dia.
H
T
EC-06
1/16
7/64
EC-07
5/64
L Length = 4”
L Length = 6”
L Length = 10”
100+
50-99
1-49
100+
25-99
1-24
100+
25-99
1-24
3/64
2.43
2.67
2.89
3.20
3.40
3.65
–
–
–
9/64
3/64
2.27
2.46
2.68
2.96
3.18
3.38
–
–
–
EC-09
3/32
5/32
5/64
2.17
2.38
2.60
2.86
3.06
3.27
–
–
–
EC-10
7/64
3/16
5/64
2.27
2.46
2.68
2.93
3.14
3.35
–
–
–
EC-12
1/8
7/32
3/32
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-14
9/64
1/4
7/64
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-15
5/32
17/64
1/8
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-17
11/64
5/16
1/8
2.11
2.29
2.46
2.69
2.89
3.07
3.64
3.80
4.00
EC-18
3/16
5/16
9/64
2.11
2.29
2.46
2.69
2.89
3.07
3.64
3.80
4.00
EC-20
13/64
11/32
5/32
2.30
2.47
2.67
2.79
2.96
3.14
3.72
3.92
4.13
EC-21
7/32
3/8
5/32
2.48
2.68
2.87
2.99
3.18
3.35
3.94
4.14
4.33
EC-23
15/64
13/32
11/64
2.60
2.77
2.94
3.20
3.38
3.56
4.03
4.24
4.45
EC-25
1/4
7/16
3/16
2.60
2.77
2.94
3.20
3.38
3.56
4.03
4.24
4.45
EC-26
17/64
7/16
1/4
3.08
3.27
3.45
3.39
3.58
3.74
4.15
4.34
4.55
EC-28
9/32
7/16
1/4
3.08
3.27
3.45
3.39
3.58
3.74
4.15
4.34
4.55
EC-29
19/64
1/2
1/4
3.29
3.48
3.65
3.49
3.66
3.86
4.35
4.56
4.76
EC-31
5/16
1/2
1/4
3.29
3.48
3.65
3.49
3.66
3.86
4.35
4.56
4.76
EC-32
21/64
9/16
1/4
3.39
3.58
3.75
3.69
3.89
4.05
4.91
5.10
5.32
EC-34
11/32
9/16
1/4
3.39
3.58
3.75
3.69
3.89
4.05
4.91
5.10
5.32
EC-35
23/64
5/8
1/4
3.49
3.66
3.86
3.91
4.08
4.25
5.34
5.55
5.75
EC-37
3/8
5/8
1/4
3.49
3.66
3.86
3.91
4.08
4.25
5.34
5.55
5.75
How to order: EXAMPLE
Style
EC-12
• Delivery from stock
• Specifications: Oil hardening tool steel; hardness Rc 58/60; heads annealed Rc 42/45
Dia.
1/8”
Length
4”
Qty.
200
23
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
LONG LENGTH BEVEL HEAD PERFORATORS
EJECTOR PUNCH BLANKS
M-2: Rc 60/63 • D-2, PM-M4, PM-10V: Rc 61/63
M-2 HIGH SPEED STEEL: RC 60/63 • Style AF-M2: 4” and 6” lengths
Style PEB
Style AF-M2
Style
PEB
D
Diameter
FRACTIONAL
1/16” 5/64” 3/32” 7/64”
1/8”
9/64” 5/32”
11/64” 3/16”
13/64” 7/32”
15/64” 1/4”
17/64” 9/32”
19/64” 5/16”
21/64” 11/32”
23/64”
3/8”
Minimum Cut-off Charge $5.00
Diameter .010 – .029 .030 – .125 .126 – .375
.40
Price (each) On request
.30
22
L
Length
Net Price (each)
12*
18
25
31
37
43
50
62
75
100
D
Dia.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
100
50-99
25-49
10-24
4”
3.21
3.68
4.22
4.85
6”
4.11
4.61
5.23
5.97
4”
2.98
3.36
3.82
4.39
6”
3.28
3.64
4.12
4.66
4”
3.36
3.73
4.20
4.75
6”
3.64
4.01
4.41
5.04
4”
3.92
4.28
4.75
5.31
6”
4.20
4.86
5.04
5.60
Component
4”
4.66
4.81
5.50
6.06
6”
4.95
5.31
5.79
6.35
4”
4.75
5.15
5.60
6.15
6”
5.04
5.43
5.87
6.44
4”
5.18
5.55
6.03
6.56
6”
6.53
6.91
7.37
7.93
4”
5.18
5.55
6.03
6.56
PEC-05
PEC-10
PEC-20
PEC-29
PEC-42
PEC-60
PEC-90
PEC-120
6”
6.80
7.18
7.64
8.20
4”
5.48
5.86
6.32
6.87
6”
7.30
7.64
8.12
8.67
4”
5.48
5.86
6.32
6.87
6”
7.64
8.01
8.49
9.05
H
T
1/4
1/8
5/16
1/8
3/8
3/16
7/16
3/16
1/2
3/16
9/16
3/16
5/8
3/16
3/4
3/16
7/8
3/16
11/8
3/16
• Delivery from stock
• For decimal size diameters, refer to Style A
Dia.
1/8”
Length
4”
L = Length
1/4 ” Incr.
Component
(PEC)
11/4 - 21/2
11/4 - 3
11/4 - 3
11/4 - 4
11/4 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
10
20
29
Price
M-2
26.12
20.07
19.81
19.35
19.55
21.71
22.97
26.69
33.11
47.57
42
60
60
60
90
90
90
D-2
PM-M4
PM-10V
On Request
20.93
20.65
20.22
20.43
22.66
23.96
27.80
34.42
49.31
22.98
23.08
23.21
24.07
27.28
28.93
34.83
44.10
65.07
28.47
28.35
29.25
30.62
34.72
37.73
45.12
56.10
84.14
* PEB-12 stocked in M-2 only
Style PEC
Component Specifications
Set Screw
Spring
Pin
D
L
D
L
D
L
H
T
Price
Per Set
3-48
2-56
3-48
5-40
8-32
10-32
1/4-28
5/16-24
0.19
0.12
0.19
0.19
0.19
0.19
0.25
0.25
.080
.065
.080
.104
.135
.167
.216
.270
2.40
2.40
2.40
2.40
3.20
3.00
3.05
2.56
.017
.022
.027
.027
.041
.058
.089
.120
1.10
2.0
2.0
2.0
2.0
2.0
2.25
2.2
.048
.062
.062
.073
.094
.120
.156
.188
.031
.031
.047
.047
.062
.062
.094
.094
3.21
2.93
2.93
2.93
2.93
2.93
2.93
4.03
Components may be purchased separately
How to order: EXAMPLE
Style
AF-M2
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Quantity Discounts
Qty.
50
1-24
NET
• Delivery from stock
25-49 50-99 100+
5%
10% Call
How to order: Example
Style
PEB-31
Mat. Qty.
Length
PM-M4 50
31/4
7
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCHES
LONG LENGTH BEVEL HEAD PERFORATORS
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
Tool Steel: RC 58/60 • Style AF-01: 4” and 6” lengths
See page 16 for PRICE LIST
Style AF 01
Style PS
Point
Concentricity
Tolerance
P to D
+.0002
–.0
+.0005
#2
–.0
+.0002
#1
–.0
+.0005
#2
–.0005
#1
Round
Shaped
How to check “G”...
G=
T.I.R.
.0003
.0005
.0003
.001
P2+W2
DIAMETER: FRACTIONAL INCREMENTS
D
Diameter
FRACTIONAL
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
1/16” 5/64” 3/32” 7/64”
1/8”
9/64”
11/64”
13/64”
Style PSP
Style PSO
Style PSD
15/64”
17/64”
19/64”
Style PSR
Style PSK
(also
includes
square)
8
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Style PSF
21/64”
23/64”
How to order: Example
Style Length Mat. Pt. Dim. (P x W) Pt. Length
M-2
2”
PSP-31
.138
1”
PSO-25 21/4” 10-V
.1614 x .0986
11/4”
PSK-37 21/4” 10-V .1614x.1267 R .010
11/4”
• When ordering please specify style PSP, PSO, PSD, PSR, PSK or PSF
• For additional shapes see page 27
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
L
Length
Net Price (each)
100
50-99
25-49
10-24
4”
1.54
1.83
2.19
2.57
6”
1.96
2.24
2.65
3.09
4”
1.37
1.59
1.88
2.17
6”
1.60
1.80
2.11
2.42
4”
1.39
1.60
1.89
2.18
6”
1.62
1.84
2.14
2.45
4”
1.46
1.63
1.94
2.26
6”
1.65
1.88
2.17
2.47
4”
1.98
2.18
2.50
2.81
6”
2.45
2.65
2.96
3.24
4”
2.12
2.32
2.63
2.93
6”
2.57
2.79
3.11
3.39
4”
3.34
3.55
3.84
4.16
6”
3.78
3.97
4.28
4.59
4”
3.42
3.64
3.93
4.23
6”
3.89
4.07
4.38
4.70
4”
3.77
3.94
4.27
4.58
6”
4.20
4.41
4.71
5.01
4”
4.03
4.22
4.54
4.83
6”
4.46
4.68
4.98
5.29
Tol. Keying Qty.
24
#2
6
#1
1F
6
#1
1F
DIAMETER: DECIMAL .001” INCREMENTS
D Diameter
L
DECIMAL
Length
.001 increments
.047 - .109
.110 - .124
.126 - .156
.157 - .187
.188 - .218
.219 - .249
.251 - .281
.282 - .312
.313 - .343
.344 - .374
100
50-99
25-49
10-24
3.33
4.06
5.89
10.61
4”
2.81
3.37
4.85
8.52
6”
2.99
3.87
5.61
9.10
4”
2.91
3.49
4.92
8.59
6”
3.09
3.97
5.70
9.19
4”
2.99
3.58
4.71
8.89
6”
3.19
4.46
7.35
10.83
4”
3.37
3.97
5.41
9.26
6”
3.77
5.03
7.94
11.41
4”
3.58
4.16
5.61
9.47
6”
3.87
5.15
8.01
11.50
4”
5.07
5.73
7.35
11.74
6”
5.81
7.06
9.95
13.43
4”
5.17
5.82
7.48
11.87
6”
6.02
7.26
10.14
13.63
4”
5.51
6.15
7.80
12.20
6”
6.28
7.55
10.43
13.92
4”
5.73
6.38
8.01
12.43
6”
6.48
7.73
10.64
14.11
4”
On Request
6”
Minimum Cut-off Charge $5.00
Diameter .010 – .029 .030 – .125 .126 – .375
.40
Price (each) On request
.30
• Delivery from stock (fractional only)
• Special pricing on large quantities
Net Price (each)
How to order: EXAMPLE
Style
AF-01
Dia.
5/32”
Length
6”
Qty.
200
21
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCHES
BEVEL HEAD PERFORATORS
Tool Steel: RC 58/60 • M-2 High Speed Steel: Rc 60/63
Style AF
D
Diameter
.001”
increments
.020 - .029
.030 - .039
.040 - .0625
(1/16)
.063 - .0781
(5/64)
.079 - .0937
(3/32)
.094 - .1094
.110 - .125
(7/64)
(1/8)
.126 - .135
.136 - .157
.158 - .187
.188 - .250
See page 16 for PRICE LIST
L
Length
01
M-2
2”
1.35
–
21/2”
1.56
1.54
2”
1.33
–
21/2”
1.54
1.55
2”
1.25
–
21/2”
1.43
1.46
2”
1.25
–
21/2”
1.43
1.52
2”
1.25
–
21/2”
1.43
1.59
2”
1.40
–
21/2”
1.64
1.82
2”
1.40
–
21/2”
1.64
1.86
2”
1.56
–
21/2”
1.82
2.12
2”
2.03
–
21/2”
2.27
3.14
2”
2.03
–
21/2”
2.27
3.14
2”
2.03
–
21/2”
2.27
3.18
Larger sizes available on request
Style
PS __
D
Dia.
PS _ 12
1/8
PS _ 18
11/4
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
11/4
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/ 2
21/ 2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
11/2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
3/16
11/4
PS _ 25
1/4
11/4
PS _ 31
5/16
11/4
PS _ 37
3/8
PS _ 43
7/16
11/2
PS _ 50
1/2
PS _ 62
5/8
11/2
PS _ 75
3/4
11/2
How to order: Example
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .020 – .029 .030 – .125 .126 – .250
.40
Price (each) On request
.30
10-24 25-49 50-99 100+
NET 5% 10% Call
• 10 piece minimum
• Specify M-2 or 01
Style
AF M-2
AF 01
Dia.
.125
.125
Length Qty.
50
21/2”
50
21/2”
PS _ 100
1
Shapes
Point
Round
Length B Min. P Min. W Max. P or G
1/2
.031
.062
3/4
.062
.062
.1245
.062
1
.062
1
.093
1 /4
.093
L = Standard Length
11/2
20
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• Coatings available
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
.046
.062
.062
.093
.125
.062
.062
.062
.093
.125
.1870
.062
.062
.062
.093
.125
.062
.062
.062
.093
.125
.2495
.093
.093
.093
.093
.125
.093
.093
.093
.093
.125
.3120
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.3745
.187
.187
.187
.187
.187
.187
.187
.187
.4370
.225
.225
.225
.225
.187
.187
.187
.187
.4995
.310
.310
.310
.310
.250
.250
.250
.250
.6245
.390
.390
.390
.390
.312
.312
.312
.312
.7495
.485
.485
.485
.485
.375
.375
.375
.375
.9995
9
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
EJECTOR PUNCHES
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
DECIMAL TOOL / GAGE BLANKS
M-2: Rc 60/63 • D-2, PM-M4, PM-10V: Rc 61/63
M-2 High Speed Steel: Rc 60/63
See page 17 for PRICE LIST
Style PE
Point
Concentricity
Tolerance
P to D
+.0002
#1 –.0
+.0005
#2 –.0
Round
.0003
.0005
+.0002
–.0
+.0005
#2
–.0005
.0003
#1
Shaped
How to check “G”...
G=
T.I.R.
.001
P2+W2
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
D
Diameter
.006 - .029
Style DTB
L = Price by Length
21/2”
31/2”
On Request
4”
6”
8”
–
–
–
P
N
M
+.0002
–.0000
+.0001
–.0001
+.0000
–.0002
.030 - .061
1.85
3.08
–
–
–
.062 - .100
2.09
3.32
4.80
6.13
9.82
.101 - .140
2.09
3.32
4.80
7.11
10.31
.141 - .250
2.58
3.69
5.40
7.85
11.17
.251 - .312
3.41
4.49
6.30
8.87
12.35
.313 - .375
4.58
5.91
7.46
10.03
13.50
.376 - .437
5.73
6.81
8.61
11.31
14.78
.438 - .500
6.25
7.32
9.12
11.83
15.29
.501 - .562
7.78
9.71
10.99
14.22
19.03
.563 - .625
9.48
11.49
12.98
17.61
22.85
.626 - .750
12.81
15.68
17.72
24.13
31.14
.751 - .875
16.42
20.23
23.04
31.62
39.26
.876 - 1.000
20.52
25.42
28.96
40.28
50.57
1.001 - 1.125
25.77
32.51
37.21
51.66
67.40
10”
12”
SPECIFY CHOICE OF “D” TOLERANCES
On Request
All items are subject to the set-up charge per diameter
See page 7 for PEC Component Specifications.
Style PEP
Style PEO
Style PED
Style PER
Style PEK
Style PEF
(also
includes
square)
How to order: Example
Pt. Dim. (P x W) Pt. Length
Style Length Mat.
.138
M-2
PEP-31
2”
1”
.1614 x .0986
PEO-25 21/4” 10-V
11/4”
PEK-37 21/4” 10-V .1614x.1267 R .010
11/4”
10
• When ordering please specify style PEP, PEO, PED, PER, PEK or PEF
• For additional shapes see page 27
Tol. Keying Qty.
24
#2
6
#1
1F
6
#1
1F
Minimum Cut-off Charge $5.00
Quantity Discounts
How to order: EXAMPLE
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
On request
.60
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
Style Dia. Tol. Length Mat. Qty.
DTB .1365 P 21/2” M-2 25
• Delivery: 3 days
• Tool blanks also available in A-2, PM-M4,
PM-10V, Stainless Steel
• Set-up charges:
21/ 2 - 4” = $25.00
6 - 8” = $30.00
19
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
EJECTOR PUNCHES
GROUND FRACTIONAL TOOL BLANKS
M-2 High Speed Steel: Rc 60/63
Style FTB
These are the Standard M-2 blanks from
which we grind our punches. All are in-stock
and available at very low prices.
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
See page 17 for PRICE LIST
D
Dia.
L = Price by Length
21/2”
31/2”
4”
6”
8”
1/32
0.70
–
–
–
–
3/64
0.70
–
–
–
–
1/16
0.96
1.82
–
–
–
5/64
0.96
1.82
–
–
–
3/32
0.96
1.82
–
–
–
7/64
0.96
1.82
–
–
–
D
Dia.
PE _ 12
1/8
11/4 11/2 13/4
11/4 11/2 13/4
2
2
21/4 21/2
21/4 21/2
PE _ 18
3/16
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
21/4 21/2
21/4 21/2
21/4 21/2
23/4
23/4
23/4
3
3
3
1/2
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
1/2
5/16
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
3/8
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/ 2
21/ 2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
1/8
0.96
1.82
3.01
4.82
7.22
PE _ 25
9/64
0.98
1.84
3.05
4.88
7.32
PE _ L
5/32
0.98
1.84
3.05
4.88
7.32
11/64
0.98
1.84
3.05
4.88
7.32
3/16
0.98
1.84
3.05
4.88
7.32
13/64
1.46
2.44
3.68
5.50
7.94
7/32
1.46
2.44
3.68
5.50
7.94
15/64
1.46
2.44
3.68
5.50
7.94
1/4
1.52
2.53
3.78
5.68
8.20
PE _ 37
17/64
1.89
2.84
4.11
6.00
8.52
PE _ L
9/32
1.89
2.84
4.11
6.00
8.52
19/64
1.89
2.84
4.11
6.00
8.52
5/16
2.21
3.16
4.42
6.31
8.84
21/64
2.53
3.48
4.74
6.63
9.15
11/32
2.84
3.78
5.05
6.94
9.47
23/64
3.10
4.04
5.31
7.20
PE _ 31
PE _ 43
PE _ L
3.34
4.28
5.55
7.44
9.98
3.66
4.61
5.87
7.76
10.28
13/32
3.97
4.92
6.17
8.09
10.59
27/64
4.23
5.18
6.45
8.34
10.86
7/16
4.47
5.42
6.69
8.70
11.24
1/2
4.99
5.93
7.20
9.21
11.73
7/16
PE _ L
9.72
3/8
1/4
L = Standard Length
PE _ L
PE _ 50
25/64
Shapes
Ejector
Point
Round
Length B Min. P Min. W Max. P or G Comp. PEC
1/4
.062
.050
PEC-10
.1245
1/2
.062
.050
Style
PE ____
PE _ 62
1/2
5/8
PE _ L
9/16
6.06
7.63
8.26
10.23
14.26
PE _ 75
5/8
7.41
9.08
9.87
12.99
17.22
PE _ L
3/4
10.11
12.35
13.44
17.86
23.49
7/8
13.19
16.19
17.66
23.63
29.58
PE _ 100
1
16.70
20.61
22.53
30.21
37.89
PE _ L
11/8
20.75
25.55
27.97
37.63
47.30
3/4
1
3/4
1
3/4
1
11/4
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
.062
.062
.062
.062
.062
.093
.1870
PEC-20
.093
.093
.093
.093
.093
.093
.093
.093
.2495
PEC-29
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.3120
PEC-42
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.3745
PEC-60
.187
.187
.187
.187
.187
.187
.187
.187
.4370
PEC-60
.225
.225
.225
.225
.250
.250
.250
.250
.4995
PEC-60
.310
.310
.310
.310
.282
.282
.282
.282
.6245
PEC-90
.390
.390
.390
.390
.312
.312
.312
.312
.7495
PEC-90
.485
.485
.485
.485
.375
.375
.375
.375
.9995
PEC-90
Note: PE_L denotes longest Point Length. Please Specify when ordering.
Quantity Discounts
1-24 25-49 50-99 100+
10% Call
NET 5%
18
How to order: EXAMPLE
Style
FTB
• Delivery from stock
Dia. Length Mat. Qty.
1/2
21/2
M-2 2
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• Coatings available
11
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PILOT PUNCHES
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
EJECTOR PUNCH
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
See page 16 for
PRICE LIST
Style
D
PPP Dia.
Style PPP
12
18
25
31
(Does not include pilot)
1/8
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
3/16
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
1
11/4
11/2
21/2
23/4
31/2
33/4
1/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
3/4
1/4
5/16
11/2
13/4
21/4
3/4
1
11/4
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
37
3/8
43
7/16
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
1/2
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
5/8
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
3/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
75
100
1
How to order: Example
Length Mat.
Style
PPP-50 33/4” M-2
• Delivery: 2 days
• Coatings available
1/2
2
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
62
12
Point Diam. P
Point
Length B
Min.
Max.
L = Standard Length
11/4
50
PRICE LIST
Pt. Dia. Pt. Len. Tol. Qty.
11/2” #2 19
.2718
Tolerance
#1
#2
+.0002
–.0
+.0005
–.0
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
Tolerance
.125
.125
.125
.125
.061
.061
.061
.092
.124
.1875
.1875
.1875
.1875
.1875
.061
.061
.061
.092
.124
.250
.250
.250
.250
.250
.092
.092
.092
.092
.124
.3125
.3125
.3125
.3125
.3125
.124
.124
.124
.124
.124
.375
.375
.375
.375
.375
.186
.186
.186
.186
.4375
.4375
.4375
.4375
.224
.224
.224
.224
.500
.500
.500
.500
.309
.309
.309
.309
.625
.625
.625
.625
HP
Headed
.389
.389
.389
.389
.750
.750
.750
.750
Style
.484
.484
.484
.484
1.000
1.000
1.000
1.000
.0003
.0005
+.0005
–.0
Tolerance
#1 +.0002
–.0
#2
+.0005
–.0005
18
25
31
37
43
50
62
75
100
29.84 29.88 29.65
30.32
33.42
36.82
41.18
50.51
76.51
–
31.45 30.74 30.51
31.21
34.37
37.82
42.40
51.83
78.26
–
33.27 33.67 34.02
35.37
39.56
43.48
50.16
62.38
95.47
PM-10V
–
40.71 40.95 42.12
44.07
49.35
55.05
63.36
77.89
120.33
M-2
32.14
26.18 26.12 25.81
26.33
29.14
31.85
36.07
44.60
66.70
D-2
#1 +.0002
–.0
PM-M4
#2
12
35.76
M-2
.061
.061
.061
.092
Concentricity
P to D
T.I.R.
Steel
D = Body Diameter
D-2
–
27.04 26.96 26.68
27.22
30.08
32.84
37.18
45.72
68.45
PM-M4
–
29.41 29.70 30.00
28.02
35.07
38.24
44.69
55.97
85.17
PM-10V
–
36.12 36.24 37.33
39.09
44.00
48.81
56.85
70.23
108.07
Steel
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
86.92
108.36
M-2
46.69
41.69 42.66 45.30
49.48
57.09
63.82
72.59
D-2
–
42.54 43.51 46.17
50.37
58.03
64.82
73.71
88.22
110.11
PM-M4
–
47.86 49.35 53.05
58.46
67.96
75.90
87.62
105.98
134.98
PM-10V
–
57.67 59.19 64.28
71.01
82.48
92.87
107.10
128.76
166.22
M-2
44.09
38.98 39.82 42.15
45.94
53.00
59.18
67.44
80.98
101.72
D-2
–
39.83 40.67 43.02
46.81
53.95
60.18
68.54
82.29
103.48
PM-M4
–
44.73 46.08 49.44
54.40
63.26
70.57
81.70
99.15
127.35
PM-10V
–
53.99 55.36 60.04
66.22
76.95
86.59
100.12
120.74
157.26
Style PEP
Style PEO
Style
PER
Style PED
Style
PEK
Style
PEF
PRECISION DIE BUTTONS
Style
DP
Headless
Steel
D = Body Diameter
18
25
31
37
43
50
62
75
87
100
23.11 22.66 22.69 22.82 25.89
26.41 28.88 38.98 47.16 54.06 65.92
PM-10V 28.97 28.91 29.44 30.25 33.27
34.76 39.64 54.13 67.23 77.85 93.70
26.90 26.72 26.40 26.54 30.28
30.93 33.86 41.19 49.33 57.61 73.32
PM-10V 33.08 32.99 33.62 34.58 39.55
41.30 47.06 57.54 71.06 85.62 103.34
M-2
M-2
Steel
M-2
D = Body Diameter
18
25
31
37
43
72.77
72.63
72.37
72.48
82.04
50
62
75
87
100
125
PM-10V 103.48 103.39 103.94 104.76 118.94 120.41 127.49 151.73 171.82 186.77 209.20
H_
Headed
PM-10V 107.64 107.55 108.18 109.14 125.23 126.94 133.93 158.05 180.11 191.80 216.41
78.03
77.86
77.53
77.67
88.25
Style O
Style D
82.56 85.82 104.16 117.56 126.72 143.25
D_
Headless
M-2
Style P
125
88.89 108.81 110.34 123.99 130.18 150.91
Style R
Style K
Style F
NOTE: Pricing shown is for tolerance #2. For tolerance #1 prices, please add 25%.
• For Ejector Punch style details see pgs. 10 & 11
• 1-6 pieces, $25 set-up charge for punches (shapes only)
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• For Die Button style details see pgs. 14 & 15
• 1-6 pieces, Set-up Charges: M2 = $15, PM-10V = $30, Shapes = $50
• Delivery: Round = 1 to 3 days; Shapes = 5 days
17
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCH and PILOT PUNCH
EDM DIE BLANKS
M-2: Rc 60/63 • PM-10V: Rc 61/63
PRICE LIST
Style PSP
Tolerance
#1 +.0002
–.0
#2 +.0005
–.0
Style PSO
Style PSD
Tolerance
#1 +.0002
–.0
Style
PSR
Style
PSK
Style
PSF
#2 +.0005
–.0005
Style PPP
Tolerance
#1 +.0002
–.0
#2 +.0005
–.0
Standard Keying
Single Flat = 1F Double Flat = 2F
5.00
7.50
16
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Dowel = 2D
5.00
Steel
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
M-2
17.96
18.63
19.13
19.83
20.85
23.94
27.22
31.58
41.33
67.34
A-2
15.88
16.08
16.54
16.92
17.72
20.19
22.70
26.13
34.39
55.35
D-2
18.21
18.91
19.40
20.11
21.15
24.31
27.63
32.61
42.05
68.46
PM-M4
20.87
22.06
22.92
24.20
25.89
30.09
33.88
40.97
53.19
86.28
PM-10V 24.08
26.80
27.39
29.15
31.68
36.96
42.48
52.09
66.63 109.08
M-2
14.32
14.96
15.37
15.99
16.86
19.67
22.25
26.88
35.22
57.52
A-2
12.62
12.78
13.15
13.47
14.12
16.35
18.22
21.43
28.88
46.52
D-2
14.57
15.23
15.63
16.29
17.17
20.03
22.66
27.41
35.94
58.67
PM-M4
17.06
18.19
18.95
20.18
21.71
25.61
28.64
35.50
46.78
75.99
PM-10V 19.54
22.21
22.68
24.35
26.70
31.61
36.26
45.58
58.98
96.80
12
18
25
31
37
50
62
75
100
M-2
28.89
30.46
31.91
35.48
40.01
47.63
54.22
63.41
77.72
99.17
A-2
25.92
26.94
28.26
31.25
35.26
41.86
47.41
54.77
67.66
84.61
D-2
29.13
30.74
32.17
35.76
40.30
47.99
54.62
63.93
78.45 100.33
PM-M4
37.54
36.65
38.60
43.23
49.00
58.49
66.32
78.44
96.79 125.80
PM-10V
39.77
43.75
45.63
51.31
58.62
70.09
80.31
95.83 117.51 154.97
M-2
26.27
27.76
29.06
32.33
36.47
43.53
49.57
58.25
69.69
92.54
A-2
23.55
24.48
25.67
28.38
32.04
38.14
43.18
50.09
62.27
78.58
Steel
Style HB
D = Body Diameter
43
D-2
26.51
28.02
29.34
32.62
36.76
43.90
49.98
58.78
72.51
PM-M4
31.40
33.52
35.34
39.63
44.64
53.79
60.96
72.51
89.97 118.19
PM-10V
36.26
40.09
41.80
47.06
53.83
64.56
74.04
88.86 109.49 146.00
Steel
Style DB
94.31
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
M-2
22.74
23.66
24.40
25.33
26.59
29.91
33.51
38.51
48.08
74.32
A-2
20.43
20.86
21.54
22.13
23.16
25.86
28.67
32.32
40.79
61.98
D-2
23.00
23.93
24.66
25.61
26.88
30.28
33.81
34.42
48.80
75.46
PM-M4
26.14
27.58
28.71
30.24
32.19
36.65
40.79
48.13
60.63
93.98
PM-10V
30.06
33.08
33.98
36.02
38.85
44.43
50.33
60.25
75.06 117.81
M-2
19.12
19.99
20.62
21.49
22.60
25.63
28.53
33.40
41.97
64.51
A-2
17.17
17.55
18.15
18.68
19.58
22.01
24.19
28.16
35.28
53.15
D-2
19.36
20.25
20.90
21.77
22.89
25.99
28.93
33.92
42.69
65.66
PM-M4
22.33
23.71
24.74
26.22
27.99
32.16
35.55
42.67
54.21
80.52
PM-10V
25.53
28.49
29.26
31.23
33.87
39.06
44.11
53.73
67.42 105.54
Style
DB or HB
D
Dia.
P*
Dia.
18
.1875
25
.030
1/2
5/8
3/4
7/8
.2500
.046
1/2
5/8
3/4
7/8
31
.3125
.046
1/2
5/8
3/4
7/8
37
.3750
.062
1/2
5/8
3/4
7/8
43
.4375
.062
1/2
5/8
3/4
7/8
50
.5000
.093
1/2
5/8
3/4
7/8
.093
3/4
7/8
.093
3/4
7/8
.093
3/4
7/8
.125
3/4
7/8
.125
3/4
7/8
62
75
87
100
125
.6250
.7500
.8750
1.000
1.250
Price M-2
L = Standard Lengths
DB
1
11/8
1
11/8
1
11/8
11/4
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
HB
HB
13.25
15.97
18.80
10.46
13.08
15.91
18.72
10.22
12.78
16.41
19.32
10.33
12.92
17.19
20.22
11.47
14.34
19.49
22.93
11.96
14.96
20.88
24.56
13.90
17.38
24.97
29.38
17.24
21.56
31.06
36.55
23.03
28.80
41.42
48.95
24.77
30.96
46.57
54.78
31.11
38.88
56.46
66.41
*Smaller P Diameter available on request
Quantity Discounts
1-9 10-24 25-49 50+
NET 5%
10% Call
1-9 10-24 25-49 50+
NET 5%
10% Call
• Pilot Punch style details, see pg. 12
• 1-6 pcs., $25 set-up charge (shapes only)
DB
10.61
Quantity Discounts
• Stepped Punch style details, see pgs. 8 - 9
• Delivery: Round = 1 - 2 days; Shapes = 3 days
Price PM-10V
• Delivery from stock
• SPECIALS: Complete to B/P; available in A-2, PM-M4, D-2; custom hole location.
How to order: EXAMPLE
Style
HB-25
Length
1”
Mat.
M-2
Qty.
10
13
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PRECISION DIE BUTTONS
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
PRECISION DIE BUTTONS
M-2: Rc 60/63 • PM-10V: Rc 61/63 • (A-2, D-2 and M-4 on request)
See page 17 for PRICE LIST
See page 17 for PRICE LIST
HEADLESS D
Point
Concentricity
Tolerance
P to D
+.0002
–.0
+.0005
#2
–.0
+.0002
#1
–.0
+.0005
#2
–.0005
#1
Round
Shaped
How to check “G”...
G=
T.I.R.
Style
Body Body
D__ or H__ Code Dia.
D_
.0003
H_
.0005
D_
H_
.0003
D_
.001
H_
D_
P2+W2
H_
D_
H_
D_
Die Construction
HEADED H
H_
D_
H_
D_
H_
D_
H_
D_
H_
D_
H_
Shapes*
Round*
Min.
Max.
L = Standard Length
Min. W Max. P or G
18
3/16
.050 - .128
.050 - .130
1/2
5/8
3/4
7/8
1
11/8
25
1/4
.062 - .170
.062 - .170
1/2
5/8
3/4
7/8
1
11/8
31
5/16
.062 - .212
.062 - .212
1/2
5/8
3/4
7/8
1
11/8
11/4
37
3/8
.075 - .255
.075 - .255
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
43
7/16
.075 - .297
.075 - .297
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
50
1/2
.108 - .344
.108 - .344
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
62
5/8
.108 - .425
.108 - .425
3/4
7/8
1
11/8
11/4
13/8
11/2
75
3/4
.108 - .510
.108 - .510
3/4
7/8
1
11/8
11/4
13/8
11/2
87
7/8
.108 - .680
.108 - .595
3/4
7/8
1
11/8
11/4
13/8
11/2
100
1
.140 - .680
.140 - .680
3/4
7/8
1
11/8
11/4
13/8
11/2
125
11/4
.140 - .850
.140 - .850
3/4
7/8
1
11/8
11/4
13/8
11/2
*Smaller P or W available on request
Style P
Style O
Style D
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
Style R
Style K
(also
includes
square)
14
Style F
How to order: Example
Style Body Code Length
7/8”
DK
37
HO
50
1”
Mat.
M-2
M-2
• When ordering please specify style Headless DP, DO, DD, DR, DK or DF;
Headed HP, HO, HD, HR, HK or HF
• For additional shapes see page 27
Pt. Dim. (P x W)
.109 x .225 R .010
.250 x .375
Tol. Keying Qty.
4
#1
1F
6
#2
15
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PRECISION DIE BUTTONS
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
PRECISION DIE BUTTONS
M-2: Rc 60/63 • PM-10V: Rc 61/63 • (A-2, D-2 and M-4 on request)
See page 17 for PRICE LIST
See page 17 for PRICE LIST
HEADLESS D
Point
Concentricity
Tolerance
P to D
+.0002
–.0
+.0005
#2
–.0
+.0002
#1
–.0
+.0005
#2
–.0005
#1
Round
Shaped
How to check “G”...
G=
T.I.R.
Style
Body Body
D__ or H__ Code Dia.
D_
.0003
H_
.0005
D_
H_
.0003
D_
.001
H_
D_
P2+W2
H_
D_
H_
D_
Die Construction
HEADED H
H_
D_
H_
D_
H_
D_
H_
D_
H_
D_
H_
Shapes*
Round*
Min.
Max.
L = Standard Length
Min. W Max. P or G
18
3/16
.050 - .128
.050 - .130
1/2
5/8
3/4
7/8
1
11/8
25
1/4
.062 - .170
.062 - .170
1/2
5/8
3/4
7/8
1
11/8
31
5/16
.062 - .212
.062 - .212
1/2
5/8
3/4
7/8
1
11/8
11/4
37
3/8
.075 - .255
.075 - .255
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
43
7/16
.075 - .297
.075 - .297
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
50
1/2
.108 - .344
.108 - .344
1/2
5/8
3/4
7/8
1
11/8
11/4
13/8
11/2
62
5/8
.108 - .425
.108 - .425
3/4
7/8
1
11/8
11/4
13/8
11/2
75
3/4
.108 - .510
.108 - .510
3/4
7/8
1
11/8
11/4
13/8
11/2
87
7/8
.108 - .680
.108 - .595
3/4
7/8
1
11/8
11/4
13/8
11/2
100
1
.140 - .680
.140 - .680
3/4
7/8
1
11/8
11/4
13/8
11/2
125
11/4
.140 - .850
.140 - .850
3/4
7/8
1
11/8
11/4
13/8
11/2
*Smaller P or W available on request
Style P
Style O
Style D
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
Style R
Style K
(also
includes
square)
14
Style F
How to order: Example
Style Body Code Length
7/8”
DK
37
HO
50
1”
Mat.
M-2
M-2
• When ordering please specify style Headless DP, DO, DD, DR, DK or DF;
Headed HP, HO, HD, HR, HK or HF
• For additional shapes see page 27
Pt. Dim. (P x W)
.109 x .225 R .010
.250 x .375
Tol. Keying Qty.
4
#1
1F
6
#2
15
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCH and PILOT PUNCH
EDM DIE BLANKS
M-2: Rc 60/63 • PM-10V: Rc 61/63
PRICE LIST
Style PSP
Tolerance
#1 +.0002
–.0
#2 +.0005
–.0
Style PSO
Style PSD
Tolerance
#1 +.0002
–.0
Style
PSR
Style
PSK
Style
PSF
#2 +.0005
–.0005
Style PPP
Tolerance
#1 +.0002
–.0
#2 +.0005
–.0
Standard Keying
Single Flat = 1F Double Flat = 2F
5.00
7.50
16
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Dowel = 2D
5.00
Steel
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
M-2
17.96
18.63
19.13
19.83
20.85
23.94
27.22
31.58
41.33
67.34
A-2
15.88
16.08
16.54
16.92
17.72
20.19
22.70
26.13
34.39
55.35
D-2
18.21
18.91
19.40
20.11
21.15
24.31
27.63
32.61
42.05
68.46
PM-M4
20.87
22.06
22.92
24.20
25.89
30.09
33.88
40.97
53.19
86.28
PM-10V 24.08
26.80
27.39
29.15
31.68
36.96
42.48
52.09
66.63 109.08
M-2
14.32
14.96
15.37
15.99
16.86
19.67
22.25
26.88
35.22
57.52
A-2
12.62
12.78
13.15
13.47
14.12
16.35
18.22
21.43
28.88
46.52
D-2
14.57
15.23
15.63
16.29
17.17
20.03
22.66
27.41
35.94
58.67
PM-M4
17.06
18.19
18.95
20.18
21.71
25.61
28.64
35.50
46.78
75.99
PM-10V 19.54
22.21
22.68
24.35
26.70
31.61
36.26
45.58
58.98
96.80
12
18
25
31
37
50
62
75
100
M-2
28.89
30.46
31.91
35.48
40.01
47.63
54.22
63.41
77.72
99.17
A-2
25.92
26.94
28.26
31.25
35.26
41.86
47.41
54.77
67.66
84.61
D-2
29.13
30.74
32.17
35.76
40.30
47.99
54.62
63.93
78.45 100.33
PM-M4
37.54
36.65
38.60
43.23
49.00
58.49
66.32
78.44
96.79 125.80
PM-10V
39.77
43.75
45.63
51.31
58.62
70.09
80.31
95.83 117.51 154.97
M-2
26.27
27.76
29.06
32.33
36.47
43.53
49.57
58.25
69.69
92.54
A-2
23.55
24.48
25.67
28.38
32.04
38.14
43.18
50.09
62.27
78.58
Steel
Style HB
D = Body Diameter
43
D-2
26.51
28.02
29.34
32.62
36.76
43.90
49.98
58.78
72.51
PM-M4
31.40
33.52
35.34
39.63
44.64
53.79
60.96
72.51
89.97 118.19
PM-10V
36.26
40.09
41.80
47.06
53.83
64.56
74.04
88.86 109.49 146.00
Steel
Style DB
94.31
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
M-2
22.74
23.66
24.40
25.33
26.59
29.91
33.51
38.51
48.08
74.32
A-2
20.43
20.86
21.54
22.13
23.16
25.86
28.67
32.32
40.79
61.98
D-2
23.00
23.93
24.66
25.61
26.88
30.28
33.81
34.42
48.80
75.46
PM-M4
26.14
27.58
28.71
30.24
32.19
36.65
40.79
48.13
60.63
93.98
PM-10V
30.06
33.08
33.98
36.02
38.85
44.43
50.33
60.25
75.06 117.81
M-2
19.12
19.99
20.62
21.49
22.60
25.63
28.53
33.40
41.97
64.51
A-2
17.17
17.55
18.15
18.68
19.58
22.01
24.19
28.16
35.28
53.15
D-2
19.36
20.25
20.90
21.77
22.89
25.99
28.93
33.92
42.69
65.66
PM-M4
22.33
23.71
24.74
26.22
27.99
32.16
35.55
42.67
54.21
80.52
PM-10V
25.53
28.49
29.26
31.23
33.87
39.06
44.11
53.73
67.42 105.54
Style
DB or HB
D
Dia.
P*
Dia.
18
.1875
25
.030
1/2
5/8
3/4
7/8
.2500
.046
1/2
5/8
3/4
7/8
31
.3125
.046
1/2
5/8
3/4
7/8
37
.3750
.062
1/2
5/8
3/4
7/8
43
.4375
.062
1/2
5/8
3/4
7/8
50
.5000
.093
1/2
5/8
3/4
7/8
.093
3/4
7/8
.093
3/4
7/8
.093
3/4
7/8
.125
3/4
7/8
.125
3/4
7/8
62
75
87
100
125
.6250
.7500
.8750
1.000
1.250
Price M-2
L = Standard Lengths
DB
1
11/8
1
11/8
1
11/8
11/4
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
1
11/8
11/4
13/8
11/2
HB
HB
13.25
15.97
18.80
10.46
13.08
15.91
18.72
10.22
12.78
16.41
19.32
10.33
12.92
17.19
20.22
11.47
14.34
19.49
22.93
11.96
14.96
20.88
24.56
13.90
17.38
24.97
29.38
17.24
21.56
31.06
36.55
23.03
28.80
41.42
48.95
24.77
30.96
46.57
54.78
31.11
38.88
56.46
66.41
*Smaller P Diameter available on request
Quantity Discounts
1-9 10-24 25-49 50+
NET 5%
10% Call
1-9 10-24 25-49 50+
NET 5%
10% Call
• Pilot Punch style details, see pg. 12
• 1-6 pcs., $25 set-up charge (shapes only)
DB
10.61
Quantity Discounts
• Stepped Punch style details, see pgs. 8 - 9
• Delivery: Round = 1 - 2 days; Shapes = 3 days
Price PM-10V
• Delivery from stock
• SPECIALS: Complete to B/P; available in A-2, PM-M4, D-2; custom hole location.
How to order: EXAMPLE
Style
HB-25
Length
1”
Mat.
M-2
Qty.
10
13
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PILOT PUNCHES
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
EJECTOR PUNCH
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
See page 16 for
PRICE LIST
Style
D
PPP Dia.
Style PPP
12
18
25
31
(Does not include pilot)
1/8
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
3/16
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
11/4 11/2 13/4 2 21/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
1
11/4
11/2
21/2
23/4
31/2
33/4
1/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
3/4
1/4
5/16
11/2
13/4
21/4
3/4
1
11/4
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
37
3/8
43
7/16
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
1/2
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
5/8
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
3/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
75
100
1
How to order: Example
Length Mat.
Style
PPP-50 33/4” M-2
• Delivery: 2 days
• Coatings available
1/2
2
11/2 13/4 2 21/4
13/4 2 21/4
2 21/4
21/4
62
12
Point Diam. P
Point
Length B
Min.
Max.
L = Standard Length
11/4
50
PRICE LIST
Pt. Dia. Pt. Len. Tol. Qty.
11/2” #2 19
.2718
Tolerance
#1
#2
+.0002
–.0
+.0005
–.0
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
Tolerance
.125
.125
.125
.125
.061
.061
.061
.092
.124
.1875
.1875
.1875
.1875
.1875
.061
.061
.061
.092
.124
.250
.250
.250
.250
.250
.092
.092
.092
.092
.124
.3125
.3125
.3125
.3125
.3125
.124
.124
.124
.124
.124
.375
.375
.375
.375
.375
.186
.186
.186
.186
.4375
.4375
.4375
.4375
.224
.224
.224
.224
.500
.500
.500
.500
.309
.309
.309
.309
.625
.625
.625
.625
HP
Headed
.389
.389
.389
.389
.750
.750
.750
.750
Style
.484
.484
.484
.484
1.000
1.000
1.000
1.000
.0003
.0005
+.0005
–.0
Tolerance
#1 +.0002
–.0
#2
+.0005
–.0005
18
25
31
37
43
50
62
75
100
29.84 29.88 29.65
30.32
33.42
36.82
41.18
50.51
76.51
–
31.45 30.74 30.51
31.21
34.37
37.82
42.40
51.83
78.26
–
33.27 33.67 34.02
35.37
39.56
43.48
50.16
62.38
95.47
PM-10V
–
40.71 40.95 42.12
44.07
49.35
55.05
63.36
77.89
120.33
M-2
32.14
26.18 26.12 25.81
26.33
29.14
31.85
36.07
44.60
66.70
D-2
#1 +.0002
–.0
PM-M4
#2
12
35.76
M-2
.061
.061
.061
.092
Concentricity
P to D
T.I.R.
Steel
D = Body Diameter
D-2
–
27.04 26.96 26.68
27.22
30.08
32.84
37.18
45.72
68.45
PM-M4
–
29.41 29.70 30.00
28.02
35.07
38.24
44.69
55.97
85.17
PM-10V
–
36.12 36.24 37.33
39.09
44.00
48.81
56.85
70.23
108.07
Steel
D = Body Diameter
12
18
25
31
37
43
50
62
75
100
86.92
108.36
M-2
46.69
41.69 42.66 45.30
49.48
57.09
63.82
72.59
D-2
–
42.54 43.51 46.17
50.37
58.03
64.82
73.71
88.22
110.11
PM-M4
–
47.86 49.35 53.05
58.46
67.96
75.90
87.62
105.98
134.98
PM-10V
–
57.67 59.19 64.28
71.01
82.48
92.87
107.10
128.76
166.22
M-2
44.09
38.98 39.82 42.15
45.94
53.00
59.18
67.44
80.98
101.72
D-2
–
39.83 40.67 43.02
46.81
53.95
60.18
68.54
82.29
103.48
PM-M4
–
44.73 46.08 49.44
54.40
63.26
70.57
81.70
99.15
127.35
PM-10V
–
53.99 55.36 60.04
66.22
76.95
86.59
100.12
120.74
157.26
Style PEP
Style PEO
Style
PER
Style PED
Style
PEK
Style
PEF
PRECISION DIE BUTTONS
Style
DP
Headless
Steel
D = Body Diameter
18
25
31
37
43
50
62
75
87
100
23.11 22.66 22.69 22.82 25.89
26.41 28.88 38.98 47.16 54.06 65.92
PM-10V 28.97 28.91 29.44 30.25 33.27
34.76 39.64 54.13 67.23 77.85 93.70
26.90 26.72 26.40 26.54 30.28
30.93 33.86 41.19 49.33 57.61 73.32
PM-10V 33.08 32.99 33.62 34.58 39.55
41.30 47.06 57.54 71.06 85.62 103.34
M-2
M-2
Steel
M-2
D = Body Diameter
18
25
31
37
43
72.77
72.63
72.37
72.48
82.04
50
62
75
87
100
125
PM-10V 103.48 103.39 103.94 104.76 118.94 120.41 127.49 151.73 171.82 186.77 209.20
H_
Headed
PM-10V 107.64 107.55 108.18 109.14 125.23 126.94 133.93 158.05 180.11 191.80 216.41
78.03
77.86
77.53
77.67
88.25
Style O
Style D
82.56 85.82 104.16 117.56 126.72 143.25
D_
Headless
M-2
Style P
125
88.89 108.81 110.34 123.99 130.18 150.91
Style R
Style K
Style F
NOTE: Pricing shown is for tolerance #2. For tolerance #1 prices, please add 25%.
• For Ejector Punch style details see pgs. 10 & 11
• 1-6 pieces, $25 set-up charge for punches (shapes only)
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• For Die Button style details see pgs. 14 & 15
• 1-6 pieces, Set-up Charges: M2 = $15, PM-10V = $30, Shapes = $50
• Delivery: Round = 1 to 3 days; Shapes = 5 days
17
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
EJECTOR PUNCHES
GROUND FRACTIONAL TOOL BLANKS
M-2 High Speed Steel: Rc 60/63
Style FTB
These are the Standard M-2 blanks from
which we grind our punches. All are in-stock
and available at very low prices.
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
See page 17 for PRICE LIST
D
Dia.
L = Price by Length
21/2”
31/2”
4”
6”
8”
1/32
0.70
–
–
–
–
3/64
0.70
–
–
–
–
1/16
0.96
1.82
–
–
–
5/64
0.96
1.82
–
–
–
3/32
0.96
1.82
–
–
–
7/64
0.96
1.82
–
–
–
D
Dia.
PE _ 12
1/8
11/4 11/2 13/4
11/4 11/2 13/4
2
2
21/4 21/2
21/4 21/2
PE _ 18
3/16
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
21/4 21/2
21/4 21/2
21/4 21/2
23/4
23/4
23/4
3
3
3
1/2
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
1/2
5/16
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
3/8
11/4 11/2 13/4
11/2 13/4
13/4
2
2
2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/ 2
21/ 2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/2 13/4
13/4
2
2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
1/8
0.96
1.82
3.01
4.82
7.22
PE _ 25
9/64
0.98
1.84
3.05
4.88
7.32
PE _ L
5/32
0.98
1.84
3.05
4.88
7.32
11/64
0.98
1.84
3.05
4.88
7.32
3/16
0.98
1.84
3.05
4.88
7.32
13/64
1.46
2.44
3.68
5.50
7.94
7/32
1.46
2.44
3.68
5.50
7.94
15/64
1.46
2.44
3.68
5.50
7.94
1/4
1.52
2.53
3.78
5.68
8.20
PE _ 37
17/64
1.89
2.84
4.11
6.00
8.52
PE _ L
9/32
1.89
2.84
4.11
6.00
8.52
19/64
1.89
2.84
4.11
6.00
8.52
5/16
2.21
3.16
4.42
6.31
8.84
21/64
2.53
3.48
4.74
6.63
9.15
11/32
2.84
3.78
5.05
6.94
9.47
23/64
3.10
4.04
5.31
7.20
PE _ 31
PE _ 43
PE _ L
3.34
4.28
5.55
7.44
9.98
3.66
4.61
5.87
7.76
10.28
13/32
3.97
4.92
6.17
8.09
10.59
27/64
4.23
5.18
6.45
8.34
10.86
7/16
4.47
5.42
6.69
8.70
11.24
1/2
4.99
5.93
7.20
9.21
11.73
7/16
PE _ L
9.72
3/8
1/4
L = Standard Length
PE _ L
PE _ 50
25/64
Shapes
Ejector
Point
Round
Length B Min. P Min. W Max. P or G Comp. PEC
1/4
.062
.050
PEC-10
.1245
1/2
.062
.050
Style
PE ____
PE _ 62
1/2
5/8
PE _ L
9/16
6.06
7.63
8.26
10.23
14.26
PE _ 75
5/8
7.41
9.08
9.87
12.99
17.22
PE _ L
3/4
10.11
12.35
13.44
17.86
23.49
7/8
13.19
16.19
17.66
23.63
29.58
PE _ 100
1
16.70
20.61
22.53
30.21
37.89
PE _ L
11/8
20.75
25.55
27.97
37.63
47.30
3/4
1
3/4
1
3/4
1
11/4
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
.062
.062
.062
.062
.062
.093
.1870
PEC-20
.093
.093
.093
.093
.093
.093
.093
.093
.2495
PEC-29
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.3120
PEC-42
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.3745
PEC-60
.187
.187
.187
.187
.187
.187
.187
.187
.4370
PEC-60
.225
.225
.225
.225
.250
.250
.250
.250
.4995
PEC-60
.310
.310
.310
.310
.282
.282
.282
.282
.6245
PEC-90
.390
.390
.390
.390
.312
.312
.312
.312
.7495
PEC-90
.485
.485
.485
.485
.375
.375
.375
.375
.9995
PEC-90
Note: PE_L denotes longest Point Length. Please Specify when ordering.
Quantity Discounts
1-24 25-49 50-99 100+
10% Call
NET 5%
18
How to order: EXAMPLE
Style
FTB
• Delivery from stock
Dia. Length Mat. Qty.
1/2
21/2
M-2 2
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• Coatings available
11
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
EJECTOR PUNCHES
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
DECIMAL TOOL / GAGE BLANKS
M-2: Rc 60/63 • D-2, PM-M4, PM-10V: Rc 61/63
M-2 High Speed Steel: Rc 60/63
See page 17 for PRICE LIST
Style PE
Point
Concentricity
Tolerance
P to D
+.0002
#1 –.0
+.0005
#2 –.0
Round
.0003
.0005
+.0002
–.0
+.0005
#2
–.0005
.0003
#1
Shaped
How to check “G”...
G=
T.I.R.
.001
P2+W2
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
D
Diameter
.006 - .029
Style DTB
L = Price by Length
21/2”
31/2”
On Request
4”
6”
8”
–
–
–
P
N
M
+.0002
–.0000
+.0001
–.0001
+.0000
–.0002
.030 - .061
1.85
3.08
–
–
–
.062 - .100
2.09
3.32
4.80
6.13
9.82
.101 - .140
2.09
3.32
4.80
7.11
10.31
.141 - .250
2.58
3.69
5.40
7.85
11.17
.251 - .312
3.41
4.49
6.30
8.87
12.35
.313 - .375
4.58
5.91
7.46
10.03
13.50
.376 - .437
5.73
6.81
8.61
11.31
14.78
.438 - .500
6.25
7.32
9.12
11.83
15.29
.501 - .562
7.78
9.71
10.99
14.22
19.03
.563 - .625
9.48
11.49
12.98
17.61
22.85
.626 - .750
12.81
15.68
17.72
24.13
31.14
.751 - .875
16.42
20.23
23.04
31.62
39.26
.876 - 1.000
20.52
25.42
28.96
40.28
50.57
1.001 - 1.125
25.77
32.51
37.21
51.66
67.40
10”
12”
SPECIFY CHOICE OF “D” TOLERANCES
On Request
All items are subject to the set-up charge per diameter
See page 7 for PEC Component Specifications.
Style PEP
Style PEO
Style PED
Style PER
Style PEK
Style PEF
(also
includes
square)
How to order: Example
Pt. Dim. (P x W) Pt. Length
Style Length Mat.
.138
M-2
PEP-31
2”
1”
.1614 x .0986
PEO-25 21/4” 10-V
11/4”
PEK-37 21/4” 10-V .1614x.1267 R .010
11/4”
10
• When ordering please specify style PEP, PEO, PED, PER, PEK or PEF
• For additional shapes see page 27
Tol. Keying Qty.
24
#2
6
#1
1F
6
#1
1F
Minimum Cut-off Charge $5.00
Quantity Discounts
How to order: EXAMPLE
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
On request
.60
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
Style Dia. Tol. Length Mat. Qty.
DTB .1365 P 21/2” M-2 25
• Delivery: 3 days
• Tool blanks also available in A-2, PM-M4,
PM-10V, Stainless Steel
• Set-up charges:
21/ 2 - 4” = $25.00
6 - 8” = $30.00
19
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCHES
BEVEL HEAD PERFORATORS
See page 16 for PRICE LIST
Tool Steel: RC 58/60 • M-2 High Speed Steel: Rc 60/63
Style AF
D
Diameter
.001”
increments
L
Length
01
M-2
2”
1.96
–
21/2”
2.18
2.16
2”
1.94
–
Style
PS __
D
Dia.
PS _ 12
1/8
.030 - .039
.063 - .0781
.079 - .0937
21/2”
2.16
2.17
2”
1.82
–
21/2”
2.05
2.08
PS _ 18
11/4
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
11/4
11/2
11/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/ 2
21/ 2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
2”
1.82
–
21/2”
2.05
2.08
2”
1.82
–
21/2”
2.05
2.08
2”
1.99
–
21/2”
2.27
2.46
2”
1.99
–
13/4 2
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
23/4
3
3
3
3
3
31/4
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
33/4
4
4
4
4
4
21/2”
2.27
2.46
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
13/4 2
13/4 2
2
21/4
21/4
21/4
21/4
21/2
21/2
21/2
21/2
23/4
23/4
23/4
23/4
3
3
3
3
31/4
31/4
31/4
31/4
31/2
31/2
31/2
31/2
33/4
33/4
33/4
33/4
4
4
4
4
11/4
PS _ 25
.110 - .125
1/4
11/4
(3/32)
PS _ 31
.094 - .1094
3/16
(1/16)
(5/64)
5/16
11/2
11/2
11/2
11/2
(7/64)
(1/8)
2”
2.17
–
21/2”
2.49
2.82
2”
2.70
–
21/2”
2.96
3.92
2”
2.70
–
11/4
PS _ 37
3/8
PS _ 43
7/16
PS _ 50
1/2
PS _ 62
5/8
PS _ 75
3/4
11/2
11/2
.126 - .135
11/2
.136 - .157
.158 - .187
21/2”
2.96
3.92
2”
2.70
–
21/2”
2.96
3.92
11/2
.188 - .250
11/2
Larger sizes available on request
11/2
11/2
How to order: Example
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .020 – .029 .030 – .125 .126 – .250
Price (each) On request
.40
.30
10-24 25-49 50-99 100+
NET 5% 10% Call
20
• 10 piece minimum
• Specify M-2 or 01
Style
AF M-2
AF 01
Dia.
.125
.125
Length Qty.
50
21/2”
50
21/2”
PS _ 100
1
Shapes
Round
Point
Length B Min. P Min. W Max. P or G
1/2
.031
.062
3/4
.062
.062
.1245
.062
1
.062
.093
11/4
.093
L = Standard Length
.020 - .029
.040 - .0625
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
• Delivery: Round = 1 to 2 days; Shapes = 3 days
• Coatings available
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
1/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
3/4
1
11/4
11/2
.046
.062
.062
.093
.125
.062
.062
.062
.093
.125
.1870
.062
.062
.062
.093
.125
.062
.062
.062
.093
.125
.2495
.093
.093
.093
.093
.125
.093
.093
.093
.093
.125
.3120
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.3745
.187
.187
.187
.187
.187
.187
.187
.187
.4370
.225
.225
.225
.225
.187
.187
.187
.187
.4995
.310
.310
.310
.310
.250
.250
.250
.250
.6245
.390
.390
.390
.390
.312
.312
.312
.312
.7495
.485
.485
.485
.485
.375
.375
.375
.375
.9995
9
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
STEPPED PUNCHES
LONG LENGTH BEVEL HEAD PERFORATORS
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
Tool Steel: RC 58/60 • Style AF-01: 4” and 6” lengths
See page 16 for PRICE LIST
Style AF 01
Style PS
Point
Concentricity
Tolerance
P to D
+.0002
–.0
+.0005
#2
–.0
+.0002
#1
–.0
+.0005
#2
–.0005
#1
Round
Shaped
How to check “G”...
G=
T.I.R.
.0003
.0005
.0003
.001
P2+W2
DIAMETER: FRACTIONAL INCREMENTS
D
Diameter
FRACTIONAL
Standard Keying
Parallel to the major axis (Ref. 0°)
Custom location on request.
1/16” 5/64” 3/32” 7/64”
1/8”
9/64”
11/64”
13/64”
Style PSP
Style PSO
Style PSD
15/64”
17/64”
19/64”
Style PSR
Style PSK
(also
includes
square)
8
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Style PSF
21/64”
23/64”
How to order: Example
Style Length Mat. Pt. Dim. (P x W) Pt. Length
M-2
2”
PSP-31
.138
1”
PSO-25 21/4” 10-V
.1614 x .0986
11/4”
PSK-37 21/4” 10-V .1614x.1267 R .010
11/4”
• When ordering please specify style PSP, PSO, PSD, PSR, PSK or PSF
• For additional shapes see page 27
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
L
Length
Net Price (each)
100
50-99
25-49
10-24
4”
1.54
1.83
2.19
2.57
6”
1.96
2.24
2.65
3.09
4”
1.37
1.59
1.88
2.17
6”
1.60
1.80
2.11
2.42
4”
1.39
1.60
1.89
2.18
6”
1.62
1.84
2.14
2.45
4”
1.46
1.63
1.94
2.26
6”
1.65
1.88
2.17
2.47
4”
1.98
2.18
2.50
2.81
6”
2.45
2.65
2.96
3.24
4”
2.12
2.32
2.63
2.93
6”
2.57
2.79
3.11
3.39
4”
3.34
3.55
3.84
4.16
6”
3.78
3.97
4.28
4.59
4”
3.42
3.64
3.93
4.23
6”
3.89
4.07
4.38
4.70
4”
3.77
3.94
4.27
4.58
6”
4.20
4.41
4.71
5.01
4”
4.03
4.22
4.54
4.83
6”
4.46
4.68
4.98
5.29
Tol. Keying Qty.
24
#2
6
#1
1F
6
#1
1F
DIAMETER: DECIMAL .001” INCREMENTS
D Diameter
L
DECIMAL
Length
.001 increments
.047 - .109
.110 - .124
.126 - .156
.157 - .187
.188 - .218
.219 - .249
.251 - .281
.282 - .312
.313 - .343
.344 - .374
100
50-99
25-49
10-24
3.33
4.06
5.89
10.61
4”
2.81
3.37
4.85
8.52
6”
2.99
3.87
5.61
9.10
4”
2.91
3.49
4.92
8.59
6”
3.09
3.97
5.70
9.19
4”
2.99
3.58
4.71
8.89
6”
3.19
4.46
7.35
10.83
4”
3.37
3.97
5.41
9.26
6”
3.77
5.03
7.94
11.41
4”
3.58
4.16
5.61
9.47
6”
3.87
5.15
8.01
11.50
4”
5.07
5.73
7.35
11.74
6”
5.81
7.06
9.95
13.43
4”
5.17
5.82
7.48
11.87
6”
6.02
7.26
10.14
13.63
4”
5.51
6.15
7.80
12.20
6”
6.28
7.55
10.43
13.92
4”
5.73
6.38
8.01
12.43
6”
6.48
7.73
10.64
14.11
4”
On Request
6”
Minimum Cut-off Charge $5.00
Diameter .010 – .029 .030 – .125 .126 – .375
.40
Price (each) On request
.30
• Delivery from stock (fractional only)
• Special pricing on large quantities
Net Price (each)
How to order: EXAMPLE
Style
AF-01
Dia.
5/32”
Length
6”
Qty.
200
21
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
LONG LENGTH BEVEL HEAD PERFORATORS
EJECTOR PUNCH BLANKS
M-2: Rc 60/63 • D-2, PM-M4, PM-10V: Rc 61/63
M-2 HIGH SPEED STEEL: RC 60/63 • Style AF-M2: 4” and 6” lengths
Style PEB
Style AF-M2
Style
PEB
D
Diameter
FRACTIONAL
1/16” 5/64” 3/32” 7/64”
1/8”
9/64” 5/32”
11/64” 3/16”
13/64” 7/32”
15/64” 1/4”
17/64” 9/32”
19/64” 5/16”
21/64” 11/32”
23/64”
3/8”
Minimum Cut-off Charge $5.00
Diameter .010 – .029 .030 – .125 .126 – .375
.40
Price (each) On request
.30
22
L
Length
Net Price (each)
12*
18
25
31
37
43
50
62
75
100
D
Dia.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
100
50-99
25-49
10-24
4”
3.21
3.68
4.22
4.85
6”
4.11
4.61
5.23
5.97
4”
2.98
3.36
3.82
4.39
6”
3.28
3.64
4.12
4.66
4”
3.36
3.73
4.20
4.75
6”
3.64
4.01
4.41
5.04
4”
3.92
4.28
4.75
5.31
6”
4.20
4.86
5.04
5.60
Component
4”
4.66
4.81
5.50
6.06
6”
4.95
5.31
5.79
6.35
4”
4.75
5.15
5.60
6.15
6”
5.04
5.43
5.87
6.44
4”
5.18
5.55
6.03
6.56
6”
6.53
6.91
7.37
7.93
4”
5.18
5.55
6.03
6.56
PEC-05
PEC-10
PEC-20
PEC-29
PEC-42
PEC-60
PEC-90
PEC-120
6”
6.80
7.18
7.64
8.20
4”
5.48
5.86
6.32
6.87
6”
7.30
7.64
8.12
8.67
4”
5.48
5.86
6.32
6.87
6”
7.64
8.01
8.49
9.05
H
T
1/4
1/8
5/16
1/8
3/8
3/16
7/16
3/16
1/2
3/16
9/16
3/16
5/8
3/16
3/4
3/16
7/8
3/16
11/8
3/16
• Delivery from stock
• For decimal size diameters, refer to Style A
Dia.
1/8”
Length
4”
L = Length
1/4 ” Incr.
Component
(PEC)
11/4 - 21/2
11/4 - 3
11/4 - 3
11/4 - 4
11/4 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
10
20
29
Price
M-2
26.12
20.07
19.81
19.35
19.55
21.71
22.97
26.69
33.11
47.57
42
60
60
60
90
90
90
D-2
PM-M4
PM-10V
On Request
20.93
20.65
20.22
20.43
22.66
23.96
27.80
34.42
49.31
22.98
23.08
23.21
24.07
27.28
28.93
34.83
44.10
65.07
28.47
28.35
29.25
30.62
34.72
37.73
45.12
56.10
84.14
* PEB-12 stocked in M-2 only
Style PEC
Component Specifications
Set Screw
Spring
Pin
D
L
D
L
D
L
H
T
Price
Per Set
3-48
2-56
3-48
5-40
8-32
10-32
1/4-28
5/16-24
0.19
0.12
0.19
0.19
0.19
0.19
0.25
0.25
.080
.065
.080
.104
.135
.167
.216
.270
2.40
2.40
2.40
2.40
3.20
3.00
3.05
2.56
.017
.022
.027
.027
.041
.058
.089
.120
1.10
2.0
2.0
2.0
2.0
2.0
2.25
2.2
.048
.062
.062
.073
.094
.120
.156
.188
.031
.031
.047
.047
.062
.062
.094
.094
3.21
2.93
2.93
2.93
2.93
2.93
2.93
4.03
Components may be purchased separately
How to order: EXAMPLE
Style
AF-M2
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Quantity Discounts
Qty.
50
1-24
NET
• Delivery from stock
25-49 50-99 100+
5%
10% Call
How to order: Example
Style
PEB-31
Mat. Qty.
Length
PM-M4 50
31/4
7
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
PUNCH BLANKS
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
ECONOMY EJECTOR PINS
M-2: Rc 60/63 • A-2: Rc 60/62 • D-2, PM-M4, PM-10V: Rc 61/63
Style EC
Style PPB
Standard Lengths
Style
PPB
PPB - 12
PPB - 18
PPB - 25
PPB - 31
PPB - 37
PPB - 43
PPB - 50
PPB - 62
PPB - 75
PPB - 100
D
Dia.
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
1
H
Dia.
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
11/8
T*
1/8
(3/16)
1/8 (3/16)
3/16 (1/8)
3/16 (1/8)
3/16 (1/8)
3/16
3/16
3/16 (1/4)
3/16 (1/4)
3/16 (1/4)
L = Length
” increm.
11/4 - 3
1
1 /4 - 31/ 2
11/4 - 31/ 2
11/4 - 4
11/4 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
11/2 - 4
1/4
Price
A-2
M-2
D-2
PM-M4
PM-10V
7.20
8.32
8.56
10.74
12.01
7.27
7.47
7.64
8.02
9.66
10.23
13.00
18.70
29.30
8.85
9.06
9.53
10.08
12.24
13.37
17.50
23.92
38.38
9.11
9.11
9.82
10.38
12.61
13.78
18.03
24.64
39.53
11.76
12.33
13.39
14.60
17.81
19.33
25.64
35.02
55.88
14.55
14.79
16.29
18.23
22.33
25.16
33.86
44.86
72.87
* PPBT: Optional (T) available in A-2 and M-2 only.
Extra Length 6” and 8”
Style
PPB
D
Dia.
H
Dia.
T = Head
Thickness
PPB - 12
PPB - 18
PPB - 25
PPB - 31
PPB - 37
PPB - 43
PPB - 50
PPB - 62
PPB - 75
PPB - 100
1/8
1/4
1/ 8
3/16
5/16
1/ 8
1/4
3/8
3/16
5/16
7/16
3/16
3/8
1/2
3/16
7/16
9/16
3/16
1/2
5/8
3/16
5/8
3/4
3/16
3/4
7/8
3/16
1
11/8
3/16
6” Price
A-2
M-2
A-2
M-2
12.60
12.73
13.06
13.38
14.05
16.91
17.90
22.75
32.74
51.25
14.53
15.19
15.84
16.68
17.65
21.44
23.39
30.64
39.14
67.15
16.76
16.92
17.23
17.80
18.69
22.49
23.79
30.27
43.53
68.17
19.34
20.59
21.07
22.20
23.46
28.51
31.11
40.75
55.68
89.31
Extra Length 10” and 12”
Quantity Discounts
How to order: Example
1-24 25-49 50-99 100+
10% Call
NET 5%
Style Length Mat. Qty.
M-2 50
PPB 25
3”
M-2 50
PPBT 12
3”
6
• (*) Optional T (PPBT) A-2 and M-2 only
• Delivery from stock
8” Price
(available on request)
Style
D
Dia.
H
T
EC-06
1/16
7/64
EC-07
5/64
L Length = 4”
L Length = 6”
L Length = 10”
100+
50-99
1-49
100+
25-99
1-24
100+
25-99
1-24
3/64
2.43
2.67
2.89
3.20
3.40
3.65
–
–
–
9/64
3/64
2.27
2.46
2.68
2.96
3.18
3.38
–
–
–
EC-09
3/32
5/32
5/64
2.17
2.38
2.60
2.86
3.06
3.27
–
–
–
EC-10
7/64
3/16
5/64
2.27
2.46
2.68
2.93
3.14
3.35
–
–
–
EC-12
1/8
7/32
3/32
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-14
9/64
1/4
7/64
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-15
5/32
17/64
1/8
2.01
2.17
2.36
2.60
2.77
2.94
3.49
3.71
3.91
EC-17
11/64
5/16
1/8
2.11
2.29
2.46
2.69
2.89
3.07
3.64
3.80
4.00
EC-18
3/16
5/16
9/64
2.11
2.29
2.46
2.69
2.89
3.07
3.64
3.80
4.00
EC-20
13/64
11/32
5/32
2.30
2.47
2.67
2.79
2.96
3.14
3.72
3.92
4.13
EC-21
7/32
3/8
5/32
2.48
2.68
2.87
2.99
3.18
3.35
3.94
4.14
4.33
EC-23
15/64
13/32
11/64
2.60
2.77
2.94
3.20
3.38
3.56
4.03
4.24
4.45
EC-25
1/4
7/16
3/16
2.60
2.77
2.94
3.20
3.38
3.56
4.03
4.24
4.45
EC-26
17/64
7/16
1/4
3.08
3.27
3.45
3.39
3.58
3.74
4.15
4.34
4.55
EC-28
9/32
7/16
1/4
3.08
3.27
3.45
3.39
3.58
3.74
4.15
4.34
4.55
EC-29
19/64
1/2
1/4
3.29
3.48
3.65
3.49
3.66
3.86
4.35
4.56
4.76
EC-31
5/16
1/2
1/4
3.29
3.48
3.65
3.49
3.66
3.86
4.35
4.56
4.76
EC-32
21/64
9/16
1/4
3.39
3.58
3.75
3.69
3.89
4.05
4.91
5.10
5.32
EC-34
11/32
9/16
1/4
3.39
3.58
3.75
3.69
3.89
4.05
4.91
5.10
5.32
EC-35
23/64
5/8
1/4
3.49
3.66
3.86
3.91
4.08
4.25
5.34
5.55
5.75
EC-37
3/8
5/8
1/4
3.49
3.66
3.86
3.91
4.08
4.25
5.34
5.55
5.75
How to order: EXAMPLE
Style
EC-12
• Delivery from stock
• Specifications: Oil hardening tool steel; hardness Rc 58/60; heads annealed Rc 42/45
Dia.
1/8”
Length
4”
Qty.
200
23
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
CORE PINS
STEPPED CLOSE SPACE PUNCHES
M-2: Rc 60/63 • A-2: Rc 60/62 • PM-10V: Rc 61/63
Styles SH and HH
Style CS-AP
Style SH: Standard Hardness, Rc 30/35
Style
D
Dia.
H
T
SH-09
3/32
1/4
1/8
SH-10
7/64
1/4
SH-12
1/8
SH-14
9/64
SH-15
L Length
D
Dia.
H
T
6”
10”
5.68
HH-09
3/32
1/4
1/8
5.02
5.24
6.17
5.07
6.01
HH-10
7/64
1/4
1/8
5.19
5.349
6.45
3.03
4.02
HH-12
1/8
1/4
1/8
3.14
3.31
4.24
2.98
3.09
4.02
HH-14
9/64
1/4
1/8
3.14
3.42
4.24
3.03
3.14
4.08
HH-15
5/32
9/32
5/32
3.31
3.42
4.24
3/16
3.03
3.14
4.24
HH-17
11/64
11/32
3/16
3.36
3.48
4.53
3/8
3/16
3.09
3.20
4.31
HH-18
3/16
3/8
3/16
3.36
3.58
4.53
3/8
3/16
3.14
3.31
4.36
HH-20
13/64
3/8
3/16
3.42
3.64
4.68
7/32
13/32
3/16
3.20
3.42
4.53
HH-21
7/32
13/32
3/16
3.48
3.70
4.68
SH-25
1/4
7/16
3/16
3.48
3.64
4.85
HH-25
1/4
7/16
3/16
3.75
3.97
5.07
SH-28
9/32
7/16
1/4
3.80
3.97
5.29
HH-28
9/32
7/16
1/4
4.14
4.36
5.68
SH-31
5/16
1/2
1/4
4.24
4.36
5.85
HH-31
5/16
1/2
1/4
4.58
4.75
6.29
SH-34
11/32
9/16
1/4
4.58
4.75
6.29
HH-34
11/32
9/16
1/4
4.97
5.24
6.95
SH-37
3/8
5/8
1/4
5.07
5.29
6.95
HH-37
3/8
5/8
1/4
5.46
5.73
7.61
SH-40
13/32
11/16
1/4
5.46
5.68
7.55
HH-40
13/32
11/16
1/4
5.85
6.23
8.27
SH-43
7/16
11/16
1/4
6.07
6.23
8.27
HH-43
7/16
11/16
1/4
6.51
6.84
9.09
SH-46
15/32
3/4
1/4
6.51
6.84
9.04
HH-46
15/32
3/4
1/4
7.06
7.44
9.98
SH-50
1/2
3/4
1/4
7.11
7.39
9.70
HH-50
1/2
3/4
1/4
7.61
8.05
10.75
SH-56
9/16
13/16
1/4
–
8.65
11.52
HH-56
9/16
13/16
1/4
–
9.43
12.57
SH-62
5/8
7/8
1/4
–
10.31
13.50
HH-62
5/8
7/8
1/4
–
11.03
14.89
SH-75
3/4
1”
1/4
–
14.06
18.52
HH-75
3/4
1”
1/4
–
15.21
20.40
4.75
4.90
1/8
4.90
1/4
1/8
2.98
1/4
1/8
5/32
9/32
5/32
SH-17
11/64
11/32
SH-18
3/16
SH-20
13/64
SH-21
How to order: EXAMPLE
24
Dia.
3/32”
Length
6”
Style CS-BP
L Length
Style
10”
3”
Style CS-ABP
Style HH: High Hardness, Rc 50/54
6”
Style
SH-09
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Qty.
50
• Delivery from stock
• Specifications: Air hardened hot work die steel; precision ground after heat treating;
heads forged and annealed
3”
Available On Request
All
Styles
-06
-09
-12
-15
-18
-21
-25
-31
-37
21/2” Price
31/2” Price**
P = Point Diam.
B = Std.
D
L
Dia. Length any .0001” incr. Point Length A-2 M-2 PM-10V A-2 M-2 PM-10V*
3/16
.031
.0625
Min.
7.35
9.57
8.24
10.93
1/4
.062
.0938 Standard
Min.
7.75
10.13
8.66
11.53
21/2 5/16
.093
.125
Min.
7.80
10.15
8.72
11.55
1
3 /2
3/8
.125
.1562 Cut to
Min.
8.11
10.58
9.02
11.97
7/16
.156
.1875 length
Min.
8.70
11.36
9.71
13.01
(See
1/2
.182
.2188 cut-off
Min.
8.76
11.64
9.78
13.19
9
.218
.250 charge
Min.
9.63
12.99
10.57
14.43
/16
5/8
.281
.3125 below)
Min.
10.25
14.05
11.30
15.62
5/8
.343
.375
Min.
10.79
15.02
11.81
16.56
Minimum Cut-off Charge $5.00
Diameter .0625 -.125 .1562 -.375
.30
.40
Price (each)
• Delivery: 1 to 3 days
• (*) CS-BP only
Quantity Discounts
1-5
6-24
$10 Set NET
25-49 50-99 100+
5%
10% Call
• (**) See page 4 for BLANK sizes available
How to order: Example
Length Mat. Pt. Dia. Qty.
Style
2”
CS-BP-06
A-2
.031 15
5
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
NITRIDED EJECTOR PINS
CLOSE SPACE PUNCH BLANKS
Surface Hardness: Rc 64/74 • Core Hardness: Rc 41/45
M-2: Rc 60/63 • A-2: Rc 60/62 • PM-10V: Rc 61/63
Style CS-A
L
Length
21/2” Price
Style
CS-A
D
Dia.
CS-A - 06
.0625
3.27
4.96
CS-A - 09
.0938
3.60
5.48
CS-A - 12
.125
3.60
5.48
CS-A - 15
.1562
3.85
5.86
CS-A - 18
.1875
4.40
6.68
CS-A - 21
.2188
4.40
6.68
CS-A - 25
.250*
5.21
7.92
A-2 M-2
21/2 Only
PM-10V
Styles EP and EPO
Style
Style CS-B
Style
CS-AB
D
Dia.
CS-AB-06
.0625
7/64
5/64
CS-AB-09
.0938
5/32
3/32
CS-AB-12
.1250
3/16
3/32
CS-AB-15
.1562
7/32
3/32
CS-AB-18
.1875
1/4
3/32
CS-AB-21
.2188
9/32
3/32
CS-AB-25
.250
5/16
3/32
CS-AB-31
.3125
3/8
CS-AB-37
.375
7/16
Style
CS-B
D
Dia.
H
H
T
21/2”
Price
L
Length A-2 M-2 PM-10V
3.27
4.96
4.16
3.60
5.48
4.52
3.60
5.48
4.52
3.85
5.86
4.77
Standard
21/2 31/2
Cut to
length
(See
cut-off
charge
below)
M-2
6.68
5.41
4.40
6.68
5.41
5.21
7.92
6.15
3/16
5.78
8.78
6.83
3/16
6.27
9.51
7.28
T
CS-B - 06
.0625
1/8
1/8
CS-B - 09
.0938
5/32
1/8
CS-B - 12
.1250
3/16
1/8
CS-B - 15
.1562
7/32
1/8
CS-B - 18
.1875
1/4
1/8
CS-B - 21
.2188
9/32
1/8
Price
PM-10V
On
Request
21/2” Price
31/2” Price
L
Length A-2 M-2 PM-10V A-2 M-2 PM-10V
Standard
21/2 31/2
Cut to
length
(See
cut-off
charge
below)
3.27
4.96
4.16
6.32
3.60
5.48
4.52
6.88
3.60
5.48
4.52
6.88
3.85
5.86
4.77
7.23
4.40
6.68
5.41
8.22
4.40
6.68
5.41
8.22
5.21
7.92
6.15
9.35
3/16
5.78
8.78
6.83
10.36
3/16
6.27
9.51
7.28
11.07
CS-B - 25
.250
5/16
1/8
CS-B - 31
.3125
3/8
CS-B - 37
.375
7/16
Quantity Discounts
How to order: Example
Diameter .0625–.125 .1562–.375
Price (each)
.40
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
Style Length Mat. Qty.
M-2 50
CS-B-12 21/2
4
31/2”
4.40
Minimum Cut-off Charge $5.00
• Delivery from stock
Style EPO: .005 Oversize Ejector Pins
Style EP: Standard Ejector Pins
*.250 diameter T = 5/32
Style CS-AB
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
EP-04
EP-06
EP-07
EP-09
EP-10
EP-12
EP-14
EP-15
EP-17
EP-18
EP-20
EP-21
EP-23
EP-25
EP-26
EP-28
EP-29
EP-31
EP-32
EP-34
EP-35
EP-37
EP-40
EP-43
EP-46
EP-50
EP-56
EP-62
EP-68
EP-75
EP-87
EP-100
D
Dia.
H
T
3/64
1/4
1/8
1/16
1/4
1/8
5/64
1/4
1/8
3/32
1/4
1/8
7/64
1/4
1/8
1/8
1/4
1/8
9/64
1/4
1/8
5/32
9/32
5/32
11/64
11/32
3/16
3/16
3/8
3/16
13/64
3/8
3/16
7/32
13/32
3/16
15/64
13/32
3/16
1/4
7/16
3/16
17/64
7/16
1/4
9/32
7/16
1/4
19/64
1/2
1/4
5/16
1/2
1/4
21/64
9/16
1/4
11/32
9/16
1/4
23/64
5/8
1/4
3/8
5/8
1/4
13/32
11/16
1/4
7/16
11/16
1/4
15/32
3/4
1/4
1/2
3/4
1/4
9/16
13/16
1/4
5/8
7/8
1/4
11/16
15/16
1/4
3/4
1”
11/8
11/4
1/4
7/8
1”
1/4
1/4
L Length
6”
10”
14”
18”
4.88
4.55
4.55
4.11
4.11
2.25
2.60
2.33
2.78
2.43
–
2.61
–
2.79
–
3.26
–
3.59
–
4.03
–
4.25
4.70
5.16
6.63
6.17
7.63
8.84
11.64
12.33
26.97
28.25
6.14
5.87
5.49
4.61
4.61
2.50
2.67
2.61
2.84
2.79
3.11
3.10
3.40
3.47
3.99
4.15
4.38
4.61
4.92
5.16
5.50
5.73
6.39
7.02
7.70
8.37
10.41
12.21
14.40
16.54
31.72
31.72
–
–
–
–
–
3.13
3.64
3.36
3.76
3.71
3.99
4.12
4.40
4.38
4.79
4.92
5.50
5.50
6.42
6.51
6.96
7.02
8.27
8.95
12.81
11.00
13.25
15.38
20.31
21.06
53.89
62.45
–
–
–
–
–
7.23
6.89
4.68
–
4.86
–
–
–
5.61
–
6.58
–
7.23
–
–
–
9.48
10.89
12.15
13.42
14.53
17.31
19.97
23.56
26.95
76.11
80.80
• When ordering specify EP or EPO
• Specifications: H-13 hot work die steel; heads forged and annealed;
body nitrided; honed finish
Style
EPO-06
EPO-07
EPO-09
EPO-10
EPO-12
EPO-14
EPO-15
EPO-17
EPO-18
EPO-21
EPO-25
EPO-28
EPO-31
EPO-34
EPO-37
EPO-40
EPO-43
EPO-46
EPO-50
D
Dia.
H
T
1/16
1/4
1/8
5/64
1/4
1/8
3/32
1/4
1/8
7/64
1/4
1/8
1/8
1/4
1/8
9/64
1/4
1/8
5/32
9/32
5/32
11/64
11/32
3/16
3/16
3/8
3/16
7/32
13/32
3/16
1/4
7/16
3/16
9/32
7/16
1/4
5/16
1/2
1/4
11/32
9/16
1/4
3/8
5/8
1/4
13/32
11/16
1/4
7/16
11/16
1/4
15/32
3/4
1/4
1/2
3/4
1/4
L Length
10”
14”
6.84
6.84
6.00
6.00
2.81
3.03
2.94
3.22
3.14
3.48
3.78
4.25
4.70
5.33
5.95
6.69
7.30
7.96
8.76
–
–
–
–
3.34
–
3.71
–
3.97
–
4.85
–
6.12
–
7.69
–
9.78
–
11.68
How to order: EXAMPLE
Style
EP-06
Dia.
1/16”
Length
14”
Qty.
50
25
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
M-2 HIGH SPEED STEEL PERFORATORS
NITRIDED EJECTOR PINS
Surface Hardness: Rc 64/74 • Core Hardness: Rc 41/45 • Shoulder Type
Style EPS-5
Style
D Diameter
EPS-5-046
L Length
6”
10”
14”
3/64
4.85
6.15
7.88
EPS-5-051
.005 3/64 O.S.
–
6.78
–
EPS-5-062
1/16
4.61
5.75
7.41
EPS-5-067
1/16 O.S.
–
6.41
–
.005
EPS-5-078
5/64
4.61
5.75
7.51
EPS-5-083
.005 5/64 O.S.
–
6.41
–
EPS-5-093
3/32
4.13
5.23
7.12
EPS-5-098
.005 3/32 O.S.
–
5.88
–
EPS-5-109
7/64
4.13
5.23
7.12
EPS-5-114
7/64 O.S.
–
5.88
–
.005
Style EPS-2
Style
D Diameter
EPS-2-046
3/64
L Length
6”
10”
14”
4.73
5.45
7.63
EPS-2-051
.005 3/64 O.S.
–
6.54
–
EPS-2-062
1/16
4.56
5.49
7.00
EPS-2-067
.005 1/16 O.S.
–
6.15
–
EPS-2-078
5/64
4.56
5.49
7.14
EPS-2-083
.005 5/64 O.S.
–
6.15
–
EPS-2-093
3/32
3.95
4.95
6.84
EPS-2-098
.005 3/32 O.S.
–
5.61
–
EPS-2-109
7/64
3.95
4.95
6.69
EPS-2-114
7/64 O.S.
–
5.61
–
.005
How to order: EXAMPLE
Style
EPS-5-046
26
Dia.
3/64”
Length
10”
Qty.
50
• When ordering please specify EPS-5 or EPS-2
• Specifications: H-13 hot work die steel; heads forged and annealed;
body nitrided; honed finish
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Form Ground • Rc 60/63
D
Diameter
.001”
increments
.010 - .014
.015 - .019
.020 - .029
.030 - .036
.037 - .046
.047 - .055
.056 - .064
.065 - .078
.079 - .087
.088 - .099
.100 - .120
.121 - .131
.132 - .147
.148 - .163
.164 - .179
.180 - .194
.195 - .210
.211 - .225
.226 - .241
.242 - .257
.258 - .272
.273 - .288
.289 - .304
.305 - .320
.321 - .336
.337 - .352
.353 - .368
.369 - .375
.376 - .436
.437 - .484
.485 - .562
.563 - .625
.626 - 1.000
L = Price by Length
H
T
1/32
1/16
1/32
1/16
3/64
1/16
1/16
1/16
5/64
1/16
(2” 3.87) 4.66 6.20
(2” 3.19) 3.87 5.34
(2” 2.58) 3.13 4.66
4.29
4.29
2.15
3/32
3/32
3.56
7/64
3/32
21/2”
1/8
3/32
9/64
3/32
5/32
3/32
11/64
3/32
3/16
1/8
13/64
1/8
7/32
1/8
15/64
1/8
1/4
1/8
17/64
1/8
9/32
1/8
19/64
1/8
5/16
3/16
21/64
3/16
11/32
3/16
23/64
3/16
3/8
3/16
25/64
3/16
13/32
3/16
27/64
3/16
7/16
3/16
3/16
+.06
D+.09
3/16
3/16
3/16
3/16
31/2”
4”
6”
8”
—
—
8.35
—
—
7.74
—
—
7.06
—
—
6.37
5.89 10.79 17.73
5.53 10.56 16.57
16.32
5.12 9.35 15.67
15.05
10”
12”
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.60
3.33
2.89
3.62
4.75
8.90 13.65
3.09
3.81
4.94
9.17 13.99 19.55 25.15
3.52
4.33
5.39
9.62 14.43 20.19 25.97
4.16
4.92
5.97 10.34 15.37 21.53 27.72
4.62
5.82
6.44 11.72 16.51 23.13 29.68
5.01
5.82
6.76 11.67 16.89 23.66 30.42
6.07
6.89
7.74
8.79
7.19 8.27 13.19
8.52 9.67 14.71
9.94 10.80 15.44
11.66 12.67 17.34
On Request
18.49
20.08
20.87
22.77
Style B
19.10 24.57
25.91
28.09
29.22
31.93
33.26
36.12
37.58
40.99
+ .0003
**D
= - .0000 If greater than .375
and/or L (length) greater than 2.500
or style BT.
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
.60
On request
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
• Shaded area - any .0001” increment - no charge
• Set-up charges
(shaded area only)
How to order: EXAMPLE
Style
B
Dia. Length Mat. Qty.
.126 21/2
M-2 50
21/ 2 - 4” = $25.00
6 - 8” = $30.00
10 - 12” = $50.00
3
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
www.ppunch.com
M-2 HIGH SPEED STEEL PERFORATORS
CUSTOM SHAPES
Form Ground • Rc 60/63
Style AB
Available on: PS _ and PE _ Punches and on D _ and H _ Dies
D
Diameter
.001”
increments
.010 - .014
.015 - .019
.020 - .029
.030 - .036
.037 - .046
.047 - .055
.056 - .064
.065 - .078
.079 - .087
.088 - .099
.100 - .120
.121 - .131
.132 - .147
.148 - .163
.164 - .179
.180 - .194
.195 - .210
.211 - .225
.226 - .241
.242 - .257
.258 - .272
.273 - .288
.289 - .304
.305 - .320
.321 - .336
.337 - .352
.353 - .368
.369 - .375
.376 - .436
.437 - .484
.485 - .562
.563 - .625
.626 - 1.000
H
T
1/32
1/16
1/32
1/16
3/64
1/16
1/16
1/16
5/64
1/16
3/32
5/64
7/64
5/64
1/8
5/64
9/64
3/32
L = Price by Length
21/2”
5/32
3/32
11/64
3/32
3/16
3/32
13/64
3/32
7/32
3/32
15/64
3/32
1/4
3/32
17/64
3/32
9/32
3/32
19/64
3/32
5/16
3/32
21/64
3/16
11/32
3/16
23/64
3/16
3/8
3/16
25/64
3/16
13/32
3/16
27/64
3/16
7/16
3/16
3/16
D
+.06
3/16
+.09
3/16
3/16
31/2”
(2” 3.87) 4.66 6.20
(2” 3.19) 3.87 5.34
(2” 2.58) 3.13 4.66
4.29
4.29
2.15
3.56
4”
6”
8”
—
—
8.35
—
—
7.74
—
—
7.06
—
—
6.37
5.89 10.79 17.73
5.53 10.36 16.57
16.32
5.12 9.35 15.67
15.05
2.60
3.32
2.89
3.56
4.75
8.90 13.65
3.09
3.81
4.94
9.17 13.99
3.52
4.32
5.39
9.62 14.43
4.92
5.97 10.34 15.37
4.62
5.45
6.44 11.27 16.51
5.01
5.82
6.76 11.67 16.89
6.07
6.89
7.74
8.79
7.19 8.27
8.51 9.67
9.94 10.80
11.66 12.67
On Request
4.16
4.16
3/16
13.19
14.71
15.44
17.34
18.49
20.08
20.87
22.77
NOTES TO ABOVE DRAWINGS:
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 – .029 .030 – .125 .126 – .375 .376 – .499 .500 – .625
.60
On request
.40
Price (each) On request
.30
1-24 25-49 50-99 100+
NET 5%
10% Call
2
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
• Set-up charges
21/ 2 - 4” = $25.00
(shaded area only) 6 - 8” = $30.00
How to order: EXAMPLE
Style
AB
Dia. Length Mat. Qty.
.126 21/2
M-2 50
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
How to order: Example
1. Corner Radius Style
Length Mat. Pt. Dim. (P x W) R Pt. Lng. Tol. Keying Qty.
• Inside: Punches & Dies - .003 to .008 (both)
1”
PSS18-50
#2
2D
4
21/4” 10-V .418 x .324 R .007
• Outside: Punches & Dies - Sharp (unless specified)
–
.420
x.326
R
.008
DS18-62
10-V
#2
2D
4
1”
2. Center line on drawings indicates center line of body diameter
• Pricing on request
27
LOCAL & INTERNATIONAL
U.S. TOLL FREE
FAX
E-MAIL
M-2 HIGH SPEED STEEL PERFORATORS
All designs can be configured
to customer specifications
– including metric.
Standard products ship in
about 24 hours, most custom
orders in 2 to 3 weeks.
When it comes to shape,
size and finish, no other
component manufacturer
offers you more.
Since 1965, moldmakers, stampers, cold
heading, eyelet manufacturers, medical
component manufacturers and industrial and
electronics manufacturers worldwide have
relied on the full range of resources available
from the Precision Punch Corporation. From
small prototypes to large volume orders, each
piece is meticulously engineered to exact
customer specifications. With over 60% of our
business being generated from custom design
orders we know what it takes to successfully
comprehend the specific expectations of
designers, CAD operators and engineers.
Best of all, our on-site, experienced technical
team is always available to assist our
customers with the simplest sketch through
the most intricately engineered component.
Our know-how and many years of interactive
experience have taught us how to keep quality
at the highest levels... and your cost low.
860.229.9902
800.325.7593
860.224.4238
sales@ppunch.com
Form Ground • Rc 60/63
Style A
1
2
3
Locate your
Order#
and P.O.#
At www.ppunch.com go to Shipment Tracking button.
D
Diameter
.001”
increments
2”
21/2”
3”
4”
6”
8”
.010 - .014
3.87
–
–
–
–
–
.015 - .019
3.19
–
–
–
–
–
.020 - .029
2.58
–
–
–
–
–
.030 - .055
–
2.15
–
–
–
–
.056 - .087
–
2.60
2.96
5.12
9.35
–
.088 - .131
–
2.89
3.26
4.75
8.90 13.65
.132 - .179
–
3.09
3.45
4.94
9.17 13.99
.180 - .225
–
3.52
3.92
5.39
9.62 14.43
.226 - .250
–
4.16
4.54
5.97 10.01 14.88
L = Price by Length
Enter your Order# and P.O.# exactly as they appear.
+ .0003
*D
= - .0000 If greater than .250
and/or L (length) greater than 2.500
We accept
major credit cards
Registered Trademarks of Visa, MasterCard and American Express
QUALITY ASSURANCE, TERMS AND CONDITIONS
UNLESS OTHERWISE SPECIFIED, INDUSTRY STANDARD TOLERANCES WILL BE APPLIED.
Precision Punch Corporation guarantees the quality of base materials used and our workmanship according to customer specifications. The customer
is solely responsible for the design and accuracy of engineering specifications required for their intended application(s). We understand that our
products are often subject to continued operations, including re-work, processing, or other procedures beyond our control or influence. Therefore,
we do not assume any responsibility for our products post-delivery, once they have been subjected to any type of procedures or processes that may
affect in any way or form, physical or structural characteristics that may compromise the integrity of our products as delivered.
Quotation quantity is subject to ±10%. If you require an exact quantity, please discuss this with a Sales Representative to verify pricing.
Quotations are valid for 30 days. Quoted delivery time is based on receipt of Order (excludes weekends and Holidays). F.O.B. Berlin, CT USA.
Payment terms: NET 30 DAYS.
Precision Punch is a trademark of Precision Punch Corporation. All rights reserved. E/D
28
The contents of this catalog, including photos, illustrations, price lists and text can not be duplicated
electronically, or in print, whole or in part, without written consent from Precision Punch Corporation.
Minimum Cut-off Charge $5.00
Quantity Discounts
Diameter .010 - .029 .030 - .125 .126 - .250
.30
.40
Price (each) On request
• Unshaded areas above = sizes in stock
• Larger diameters or optional material on request
1 - 24 25 - 49 50 - 99 100 +
NET
5%
10%
Call
• Set-up charges
(shaded area only)
How to order: EXAMPLE
Style
A
Dia. Length Mat.
21/2
.126
M-2
3 - 4” = $25.00
6 - 8” = $30.00
Qty.
50
1