applicable codes and standards

advertisement
GLNG - CODES AND STANDARDS
The following table outlines (but not limited to) the major Australian and
International Standards used for the design, fabrication and construction of the
GLNG LNG Plant.
Standard
Title
GENERAL
AS 3961
AS 1596
AS1940
AS 5601
NFPA 59A
NFPA 30
NFPA 58
AS1200
AS 3788
AS 4343
ASME VIII
ANSI/ASME
B31.3
API 620
API 660
API 662
API 661
API 560
API 650
AS1210
AS 3814
AS 1375
API 610
API 617
API 672
API 616
ASME B73.1
ASME B73.2
The storage and handling of liquefied natural gas
LP Gas – Storage and Handling
The storage and handling of flammable and combustible liquids
Gas installations
Production, Storage & Handling of LNG
Flammable & Combustible Liquids Code
Liquefied Petroleum Gas Code
GENERAL MECHANICAL
Pressure equipment
Pressure Equipment – In-service Inspection
Pressure Equipment - Hazard Levels
Boiler & Pressure Vessel Code - Pressure vessel
Process piping
Design and construction of large, welded, low pressure storage
tanks
Shell and tube heat exchangers
Plate heat exchangers for general refinery services
Air-cooled hear exchangers for general refinery devices
Fired Heaters for general refinery services
Welded steel tanks for oil storage
Pressure Vessels
Industrial and commercial gas-fired appliances
Industrial fuel-fired appliances
ROTATING EQUIPMENT
Centrifugal pumps for petroleum, petrochemical and natural gas
industries
Axial and centrifugal compressors and expander compressors
for petroleum, chemical and gas industry services
Packaged integrally geared centrifugal air compressors for
petroleum, chemical and gas industry services
Gas turbines for petroleum, chemical and gas industry services
Specification for Horizontal End Suction Centrifugal Pumps for
Chemical Process
Specification for Vertical In-Line Centrifugal Pumps for
Chemical Process
AS 1170 Series
AS 4100
BCA
AS1657
AS 3600
AS 2982
API RP 753
API RP 752
AS 1670 Series
AS 4428 Series
AS 1603 Series
AS 1851 series
AS 2941
CIVIL AND STRUCTURAL
Minimum design loads on structures
Steel Structures
Building Code of Australia
Fixed platforms, stairways and ladders
Concrete Structures
Laboratory Design and Construction
Positioning of Portable Buildings for Occupancy
Management of Hazards Associated with Locations of Process
Plant Buildings
FIRE ENGINEERING
Fire detection, warning, control and intercom systems - System
design, installation and commissioning
Fire detection, warning, control and intercom systems - Control
and indicating equipment
Automatic fire detection and alarm systems
Maintenance of fire protection systems and equipment
Fixed Fire Protection Installations - Pumpset Systems
AS 7240 Series
Fire detection and alarm systems
NFPA 20
Stationary Pumps for Fire Protection
NFPA 22
Water Tanks for Private Fire Protection
NFPA 24
Installation of Private Fire Service Mains & Their Appurtenances
ELECTRICAL, CONTROL AND INSTRUMENTATION
AS 3000
AS 60034 Series
AS 2067
AS 60079 Series
IEC 60364
AS 1768
NFPA 850
AS 61508
AS 61511 Series
API 520 Part 1
API 520 Part 2
API 521
Electrical Installations
Rotating electrical machines
Substations and high voltage installations exceeding 1 kV a.c.
Electrical Apparatus for Explosive Gas Atmospheres
Electrical installations of buildings
Lightning Protection
Fire protection of electric generating plants and HV converter
stations
Functional safety of electrical/electronic/programmable
electronic safety-related systems
Functional safety - Safety instrumented systems for the process
industry sector
PROCESS
Sizing, selection, and installation of pressure relieving devices
in refineries, 7th Edition
Sizing, selection, and installation of pressure relieving devices
in refineries, 4th Edition
Guide of pressure relieving and depressurizing system, 4th
Edition
AS 1271
AS 61882
AS 4997
ISPS
MARPOL
OCIMF
OCIMF
SIGTTO
SOLAS
BS/EN 1474
OCIMF
OCIMF
SIGTTO
SIGTTO
Safety valves, other valves, liquid level gauges and other fittings
for boilers and unfired pressure vessels
Hazard and operability studies (HAZOP studies) - Application
guide
MARINE
Guidelines for design of maritime structures
ISPS, International Ship and Port facility Security Code.
MARPOL, International Convention for the Prevention of
Pollution from Ships, 1973, as modified by the Protocol of 1978
relating thereto, and all relevant amendments,
OCIMF, Guidelines and recommendations for the safe mooring
of large ships at piers and sea islands, Second edition, 1997.
OCIMF, Safety guide for terminals handling ships carrying
liquefied gases in bulk, 2nd Edition, 1993.
SIGTTO Site Selection and Design for LNG Ports and Jetties,
Information Paper No. 14.
SOLAS, Safety of life at sea.
Installation and Equipment for Liquefied Natural Gas – Design
and Testing of Loading/Unloading Arms”
OCIMF, Design and Construction Specification for Marine
Loading Arms
OCIMF, Recommendations for Manifolds for Refrigerated
Liquefied Natural Gas Carriers (LNG)
SIGTTO Liquefied Gas Handling Principles on Ships and In
Terminals
Recommendations for the Installation of Cargo Strainers on
LNG Carriers”
QUALITY MANAGEMENT
Quality systems -Model for quality assurance in design,
development, production, installation and servicing
Quality systems -Model for quality assurance in production,
AS IS0 9002
installation and servicing
ENVIRONMENT, HEALTH & SAFETY AND CONSTRUCTION
AS IS0 9001
AS 4801
AS 3745
AS 2187 Series
AS ISO 31000
AS 4024.2601
AS 1319
AS 1269
AS 1891 Series
Occupational Health and Safety Management Systems
Emergency control organization and procedures for buildings,
structures and workplaces
Explosives - Storage, transport and use - Terminology
Risk Management
Safety of machinery - Design of controls, interlocks and
guarding - Two-hand control devices - Functional aspects and
design principles
Safety Signs for the Occupational Environment
Occupational Noise Management
Industrial fall - arrest systems and devices
AS1576 Series
AS 1318
AS 2714
AS 3486
AS 2865
AS 3780
AS 3931
AS 4332
ANSI Z358.1
AS 1418 Series
AS 2550 Series
AS 2030 Series
AS 3012
AS 2381 Series
AS 2294.1
AS 2958 Series
AS 1715
AS 2675
AS 4655
AS 1337
AS 2210 Series
AS 1270
AS 2161 Series
AS 4501 Series
AS 1801
AS 1892 Series
AS 3199
AS 2261
AS 2299.1
Scaffolding
Industrial safety and colour code
The storage and handling of hazardous chemical materials
Handling of Dangerous Goods in Ports
Safe Working in a confined space
The storage and handling of corrosive substances
Risk analysis of technological systems - Application guide
The storage and handling of gases in cylinders
Emergency Eyewash and Shower Equipment
Cranes, hoists and winches
Cranes, hoists and winches - Safe use
Gas cylinders
Electrical installations - Construction and demolition sites
Electrical equipment for explosive gas atmospheres
Earth-moving machinery - Protective structures - General
Earth-moving machinery - Safety
Selection, use and maintenance of respiratory protective
equipment
Portable first aid kits for use by consumers
Fire Safety Audits
Eye protectors for industrial applications
Occupational protective footwear
Acoustics - Hearing protectors
Occupational protective gloves
Occupational protective clothing
Occupational protective helmets
Portable ladders
Approval and test specification - Cord extension sets
Rescue buoys
Occupational diving operations - Standard operational practice
Download