Category 6 Ultim8 Termination Block Patch Cords
Designed for use with the Ultim8 Termination Blocks, CommScope’s patch
cords allow direct patching capability from an Ultim8 block to an active
device or an RJ45 patch panel. The patch cords are impedance matched
for use in the CommScope structured cabling system, and exceed all
performance requirements for Category 6. Available in Ultim8-to-Ultim8
in one, two, and four pair cable assemblies, as well as Ultim8-to-RJ45
assemblies in both T568A and T568B wiring.
1
Features
•
Exceeds ANSI/TIA Category 6 requirements
•
Copper conductors in the cable pairs
are stranded for superior flexibility and
compacted to a near-round shape for
optimum signal strength
•
UL 1863 listed and Category 6
performance verified
Category 6 Ultim8 Patch Cords
Specifications
Operating Temperature Range:
-10° to 60 °C (14° to 140 °F)
RJ45 Plug Interface According to:
IEC 60603-7
Transmission Performance and Reliability: ANSI/TIA 568-C.2 and ISO/ IEC 11801 component requirements and Category 6/Class E system performance
Conductor:
24 AWG 7x32 stranded tinned copper
Jacket:
Lead-free PVC
Safety Rating:
UL 1863
Flammability Rating:
UL 94V-0
Ultim8 4-Pair Patch Cord Assemblies
These patch cords allow for direct patching cablility between Ultim8 blocks or patching from an Ultim8 block to an active device or an RJ45 patch panel.
Ordering Information
Description
Ultim8 plug to Ultim8 plug, wired straight through;
wired top (cable) side only Quantity: 1
Pair No.
Cable Color
Part Number
White
TP6TH-WTXX
Blue
TP6TH-BLXX
Pair 4
R
T
Red
TP6TH-RDXX
Pair 3
R
T
Green
TP6TH-GNXX
Pair 2
R
T
R
T
Yellow
TP6TH-YLXX
Pair 1
Gray
TP6TH-GYXX
White
TP6TB0WTXX
Blue
TP6TB0BLXX
Ultim8 plug to RJ45 plug, T568A Quantity: 1
RJ45 Plug
Pin#
Pair No.
8
7
Pair 4
R
T
Red
TP6TB0RDXX
2
1
Pair 3
R
T
Green
TP6TB0GNXX
6
3
Pair 2
R
T
4
5
R
T
Yellow
TP6TB0YLXX
Pair 1
Gray
TP6TB0GYXX
White
TP6TB-WTXX
Blue
TP6TB-BLXX
Ultim8 plug to RJ45 plug, T568B Quantity: 1
RJ45 Plug
Pin#
8
7
Pair No.
Pair 4
R
T
Red
TP6TB-RDXX
Pair 3
R
T
Green
TP6TB-GNXX
6
3
Pair 2
R
T
4
5
R
T
Yellow
TP6TB-YLXX
Pair 1
Gray
TP6TB-GYXX
2
1
*Replace XX with:
04 = 4‘
07 = 7‘
10 = 10‘
15 = 15‘
25 = 25‘
50 = 50‘
Contact CommScope for additional cable colors and lengths.
2
Category 6 Ultim8 Patch Cords
Ultim8 1- and 2-Pair Patch Cord Assemblies
These patch cords provide direct patching capability using standard straight-through wiring. Ultim8 block plugs are keyed for proper insertion and have a
latching mechanism to keep them secure. These patch cords are recommended for 10Base-T/Token Ring or voice installations using Ultim8 blocks.
Ordering Information
Description
Part Number
Ultim8 plug to Ultim8 plug, 1-pair, wired top (cable) side only, white cable
Quantity: 1
Pair No.
Pair 1
6648 2 000-XX
R
T
Ultim8 plug to Ultim8 plug, 2-pair, wired top (cable) side only, white cable
Quantity: 1
Pair No.
Pair 1
R
T
*Replace XX with:
6648 2 005-XX
KRONE
R
T
KRONE
Pair 2
04 = 4‘
07 = 7‘
10 = 10‘
15 = 15‘
25 = 25‘
50 = 50‘
Contact CommScope for additional cable colors and lengths.
3
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
© 2015 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services.
PS-104220-AE (11/15)