HYVA CYLINDER
714 34 201
type:
UME 129-3-0700-K282-45-1/2˝-HC
tipping weight:
15-21 ton
page # 1 / 1
Stage
diameters
129
110
91
front view cylinder
1
specifications
A
ØC
150
175
G1
459
I
K1
142
282
H1
62
N
35
ØP
88
ØY
45
S
161
ØW
45
X
45
including 20 mm pull-out [tol. -5; +30 mm]
spare parts
total stroke1
700 mm
dry weight cylinder only
43 kg
total volume
7.4 L
working volume
maximum pressure
6.8 L
220 bar
maximum pump flow
seal kit :
oil inlet swivel adapter2
2
719 04 430K
1/2˝ :
731 03 000
cylinder is delivered including oil inlet swivel adapter
tipping view
98 l/min
maximum allowable thrust first stage3
17.5 ton
oil inlet
1/2˝ BSP
technical notes
This cylinder is a lifting device only and may not be used as a
structural member or be subjected to side load. Side load
and/or poor alignment might result in cylinder leakage. Hyva
therefore strongly recommends the use of a cradle, even in
instances where the cylinder only tips to the rear or to the side.
The cylinder is painted black RAL9005. For suitable hydraulic
oils, please refer to data sheet OIL-0002. For details of
available brackets and cradles, please refer to data sheet
015BRA06.
Detailed calculations can be made using the HYVA Tipper
Program, freely available from www.hyva.com.
3
The cylinder thrust on the first stage (from the HYVA Tipper
Program) must not exceed the maximum allowable (see
specifications above).
tipping weight
46
deg
52
PL
910
mm
810
YCOG
500
mm
500
ROH
500
mm
AT
500
BL
3130
2820
2560
mm
2910
2620
2380
CYL w.r.t. COG (W)
-160
0
130
mm
-150
0
120
Tipping weight for full stroke of 46°
Tipping weight
15
18
Tipping weight for full stroke of 52°
20
ton
Tipping weight for second last stage, up to 31°
Tipping weight
Subject to change without notice.
15
18
20
15
18
21
Tipping weight for 2nd last stage, up to 35°
ton
15
18
21
DO-E 71434201 / 09-12-03 / RV AC