Bolus Wizard® Quick-Reference Guide for the Paradigm® Revel™ Insulin Pump
To Turn the Bolus Wizard On:
4.Select Edit Settings.
Press ACT .
1.From the MAIN MENU, select Bolus. Press
ACT
.
5.EDIT SETTINGS screen
appears. Press ACT .
2.Select Bolus Setup.
Press ACT .
6. Select On. Press
ACT
.
3.Select Bolus Wizard
Setup. Press ACT .
Continue to next section to program settings.
To Program Settings:
1.Highlight Carb Units.
Press ACT .
Select Grams. Press
ACT
4.Highlight Sensitivity.
Press ACT .
.
Use arrows to set
Sensitivity. Press ACT .
Press ACT again to
skip SET START TIME 2.
2.Highlight Carb Ratios.
Press ACT .
5.Highlight BG Target.
Press ACT .
Use arrows to set Ratio.
Press ACT . Press ACT again
to skip SET START TIME 2.
Use arrows to set Low and
High Target. Press ACT after
each one. Press ACT again
to skip SET START TIME 2.
3.Highlight BG Units.
Press ACT .
6.Highlight Active Ins
Time. Press ACT .
Select mg/dL. Press
ACT
.
Use arrows to set Time.
Press ACT . Press ESC .
Bolus Wizard Setup is complete.
Note: The settings shown are for illustration purposes only — your settings will be different.
Using the Bolus Wizard® Feature
To Deliver a Food and Correction Bolus:
To Review Bolus History:
1.Press . Test BG. If
using linked meter
press ACT . Or, use arrows
to enter BG. Press ACT .
1.Press ACT .
Select Bolus. Press
2.Use
to enter grams
of carb. Press ACT .
2.Select Bolus History.
Press ACT .
ACT
3.Use arrows to review
boluses given.
.
4. Confirm bolus amount
(change if necessary).
Press ACT to deliver.
To Deliver a Correction Bolus (no food):
1.Press . Test BG. If
using linked meter
press ACT . Or, use arrows
to enter BG. Press ACT .
ACT
ACT
. Select Bolus. Press
2.Scroll to Bolus Setup. Press
ACT
ACT
.
.
3.Highlight Bolus Wizard Setup. Press
.
ACT
.
5.Select the setting to be
changed. Press ACT .
.
6.Change value. Press
To Deliver a Food Bolus (no BG):
1.Press . Leave the
Enter BG screen as
dashes. Press ACT .
ACT
.
To Review Bolus Wizard Settings:
1.Press
ACT
. Select Bolus. Press
2.Scroll to Bolus Setup. Press
ACT
ACT
.
.
3.Highlight Bolus Wizard Setup. Press
4.Highlight Review
Settings. Press ACT .
2.Use
to enter grams
of carb. Press ACT .
ACT
ACT
4.Highlight Edit Settings.
Press ACT .
4. Confirm bolus amount
(change if necessary).
Press ACT to deliver.
3. Review details. Press
To Edit Bolus Wizard Settings:
1.Press
2.Leave grams of
carbohydrates at zero.
Press ACT .
3.Review details. Press
.
.
5.Scroll down to review.
4.Confirm bolus amount
(change if necessary).
Press ACT to deliver.
Note: The settings shown are for illustration
purposes only — your settings will be different.
Paradigm and Bolus Wizard are registered trademarks and Revel is a trademark of Medtronic MiniMed, Inc. 9501386-011 20110517 © 2011 Medtronic MiniMed, Inc. All rights reserved.
3.Review details. Press
ACT