Fuse Blocks and Holders
SUBHEAD
PANEL
MOUNT
Blue Seas Systems
• Rated IP66 on front- protected against powerful water jets
• For use with AGC or MDL Fuses
• 32V DC Max operating voltage
5021
Item Number
Connections
Mounting Hole Size in" (mm)
Fuse Amps
Price
5021
Quick connect
.50(12.70)
20
$3.82
Cooper Bussman
• Used with 1/4" x 1-1/4" Fuses
• When fuse is inserted: 2.64"(67.05mm) Max Depth
• Bayonet type knob for panels up to 5/16" (7.9mm) thick
• 250V
• CE, UL,& CSA certified
HKP-HH
Item Number
Connections
Mounting Hole Size in" (mm)
Fuse Amps
Price
HKP-HH
1/4" Quick Connect
.473(12) x .505(12.8)
15
$4.75
FIC
• Molded from high impact plastic
• Screw-thread terminals for positive connection
• UL, CSA, and CE recognized
• Dead Front, watertight at face of panel
• Meets military requirements of MIL-F-19207
Item Number
5200-1
Mounting Hole Size in" (mm)
5800-11
5300-3
Connections
Fuse Amps
Price
FIC
5200-1
.25(6.35) x 1.25(31.75)
12-22
0-30
$121.14
5300-11
.25(6.35) x 1.25(31.75)
90-250
0-30
$134.24
5300-3
.25(6.35) x 1.25(31.75)
34-45
0-30
$134.24
5800-11
.56(14.22) x 2(50.80)
90-250
0-30
$187.82
5900-11
.81(20.57) x 3(76.20)
90-250
31-60
$225.99
Item Number
Description
Accessories
3-1300-1
Plastic cap only for use with 5900-11
5902-11
60 Amp screw fuse cap for use with 5900-11
$24.92
$120.24
Images are representative of products listed and may not be actual product.
82
www.wardsmarine.com
Fuse Blocks and Holders
IN LINE FUSESUBHEAD
HOLDER
Cole Hersee
Glass Fuses
• Large brass contacts for maximum efficiency
• 8" (203.2mm) lead wire to install, cut wire loop
3031-0
Item Number
Terminal
Fuse Holder Description
3031-0
#14 leads
Positive twist-lock seal
Fuse Amps
Price
3-30
$3.00
Seachoice
Watertight In line
• Made of molded heat resistant non-breakable plastic
• Has spare fuse compartment
• Supplied with two nickel plated brass fuses
50-12701 AND 21
Item Number
Terminal
Type
Fuse Amps
Price
50-12701
#16
Push together
10
$5.95
50-12721
#10
Push together
30
$9.26
Blue Seas Systems
Glass Fuse
Blade Fuse
• For use with AGC or MDL glass fuses
• For use with ATO or ATC blade fuses
5060
Item Number
5063
Terminal
5064
Fuse Holder Description
5065
Fuse Amps
Price
Glass Fuse
5060
#12-16
Crimpable 30
$2.48
5063
#12
Heavy Duty with Pigtails
30
$3.88
Blade Fuse
5064
#12
Includes Pigtails
30
$3.98
5065
#12
Includes waterproof cap and pigtails
30
$9.88
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
83
Fuse Blocks and Holders
SUBHEAD
IN
LINE FUSE HOLDER
Cooper Bussman
Traditional (HFA) Series
Traditional (HEJ) Series
• Used for 1/4" x 1-1/4" fuses
• 250V
• 20A
• CE & UL recognized
• Dimensions in"(mm):
• Used for 13/32" x 2-1/4" Fuses • Used for 13/32" x 1-1/2" Fuses • For use with GLR Fuses
• For SC Style fuses
• For BAF, DCM, FNM, FNQ,
• Two leads: Line and Loadside
and KTK fuses
• 480V
• 300V
• CE, CSA, & UL recognized
• CE, UL, & CSA recognized
• UL, CE, and CSA recognized
• 600V (or less)
• Amps limited by conductor size
2.34(59.5)W x .800(20.3)H
Traditional (HEB) Series
Non Rejecting (HLR) Series
Automotive (HHX) Series
• 32V DC
• Amps is 80% continuous
of fuse rating
• HFB Same with 50V or
less rating
HFB
HFA
HEJ
HEB
HLR
HHX
Item Number
Crimp #
Description
Amps
Price
HFA
#12-#16
Water resistant holder
20
HFB#12-#16
Waterproof
20
HEJAA
#12-#8
Single pole non breakaway
35-60
$40.90
HEJBB
#10-#6
Single pole non breakaway
35-60
$39.16
HEBAA
#12-#8
Single pole non breakaway
1-30
$20.88
HEBBB
#6
Single pole non breakaway
1-30
$22.91
HLR-2A
#18-18
Black with two leads
HHX
#6 red leadwire
ATC-FHID
#16 black leadwire
Traditional
$21.97
$6.68
Non Rejecting
15
$4.00
Black with cover
20-60
$8.55
Indicating black with cover
1-20
$4.50
Automotive Blade Type
Images are representative of products listed and may not be actual product.
84
www.wardsmarine.com
Fuse Blocks and Holders
DIN RAIL
SUBHEAD
MOUNT
Phoenix
Screw Connection
Spring Cage Connection
• Simple power distribution
• Simple potential distribution
• Blown fuse indicators
• Test connection on both ends
• CSA, UL, and IECEE recognized
• Test connection on both ends
• LED status indicator
• CSA, UL, and IECEE recognized
thanks to integrated bridging
SPRING-GLASS
Item Number
with continuous function shafts
SPRING-ATC
Fuse Type
SCREW-GLASS
SCREW-BLADE
Fuse Size in mm
PLUG IN BRIDGE
Amps
Volts
Price
Screw Connection
UK10-DREHSI
Glass G
5 x 20
10
500
$22.06
UK6.3-HESI
Glass G
6.3 x 32
10
500
$14.58
UK10,3-HESI N
Glass Midget
10.3 x 38
32
690
$18.95
UK6-FSI/C
ATC Blade
Flat C
30
250
$12.37
ST4-HESILED24
Glass G
5 x 20
6.3
24
$15.44
ST4-HESILED60
Glass G
5 x 20
6.3
60
$15.44
ST4-HESILA250
Glass G
5 x 20
6.3
250
$15.44
ST4-FSI/C
ATC Blade
Flat C
Item Number
Fuse Type
Spring Cage Connection
30
Pole
400
Amps
$7.77
Price
Plug in Bridge
The last digit in the bridge designation indicates the dimension of the terminal width.
FBS2-8ST4-FSI/C
2 41
$0.90
FBS3-8ST4-FSI/C
3 41
$1.86
FBS4-8ST4-FSI/C
4 41
$3.01
FBS10-8ST4-FSI/C
10
41
$7.59
FBS2-6
ST4-HESILED24/60/ 250
2
32
$0.70
FBS3-6
ST4-HESILED24/ 60/ 250
3
32
$1.43
FBS4-6
ST4-HESILED24/ 60/ 251
4
32
$2.21
FBS10-6
ST4-HESILED24/ 60/ 253
10
32
$5.80
FBI10-8UK6-FSI/C
10 57 $13.96
FBI10-12
10
UK10,3-HESI N
101
$22.25
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
85
Fuse Blocks and Holders
FUSE BLOCKS
Blue Seas Systems
Glass
Maxi
Class T
• Can be used for 24 hour circuits
• Clear insulating cover with label recesses
• Tin plated phosphor bronze fuse clips are
• Snap on terminal cover satisfies ABYC/
• Accepts 3/8" (M10) ring terminals
• Insulating cover satisfies ABYC/
• 32V DC
• 30A per circuit, 6 circuits total
• 100A per block
• #8 screw mounting (M4)
• Accepts AGC or MDL Fuses
• 32V DC
• 30-80 A
• #10 screw mounting
• Accepts MAXI fuses from 30-80 Amps
encapsulated and cannot be sprung
USCG requirements
• Accepts wire size 18-4 AWG from sides
or bottom
USCG requirements
• UL 94-VO base resists high heat
• 16V DC
• 400A
• Up to 4/0 AWG wire size
• Accepts 3/8"-16 (M10) mounting
studs
• Accepts Class T fuses available
225-400 Amps
GLASS
GLASS FUSE BLOCKS
Item Number
*Includes negative bus using #10-32 stud
MAXI
CLASS T
MAXI FUSE BLOCK
Description
CLASS T FUSE BLOCK
Price
Glass
5015 *
6 CKT, 1/4 x 1, w/ ground
$42.31
5018
6 CKT, 1/4 x 1, w/o ground
$35.95
Maxi
5006
30-80 Amps
5502
400 Amps
$28.36
Class T
$52.30
Images are representative of products listed and may not be actual product.
86
www.wardsmarine.com
Fuse Blocks and Holders
FUSE BLOCKS
Blue Seas Systems (Continued)
ANL
Safety
Blade
• Accepts 5/16" (M8) ring terminals
• Insulating cover satisfies ABYC/USCG
• Sealed cover satisfies ABYC/USCG
• Sealed cover satisfies ABYC/USCG requirements
• Clear insulating cover with label recesses
• Covers include 20 write on circuit labels
• Accepts ring terminals
• Positive distribution bus with #10-32 stud
• 32V DC
• 30A per circuit, 100A per block
• Accepts #8 (M4) mounting
• Accepts ATO or ATC fuses
requirements
• UL 94-V0 base resists high heat
• 5005: 300 Amp, 2/0 AWG wire size
• 5503: 750 Amps, 4/0 AWG wire size
• Accepts ANL fuses
requirements
• CE marked, meets SAE J1171 and IP66
requirements
• Accepts Blue Sea Systems square
format label
• 32 VDC
• 7720: 200A uses AMI or MIDI fuses
• 7721: 300A uses MEGA or AMG fuses
ANL STYLE
SAFETY STYLE
BLADE STYLE
CHART A FOR DIMENSIONS
5005
5503
ANL FUSE BLOCKS
BLADE FUSE BLOCKS
Item Number
Description
Price
5005
300 Amps, w/ cover
$25.69
5503
750 Amps, w/ cover
$52.30
7721
300 Amps, w/ cover
$29.98
7720
200 Amps, w/ cover
$29.98
5025
6 CKT, w/ ground
$46.95
5026
12 CKT, w/ ground
$58.72
ANL
Safety
Blade
Images are representative of products listed and may not be actual product.
www.wardsmarine.com
87
Fuse Blocks and Holders
FUSE BLOCKS
Blue Seas Systems (Continued)
CHART A: DIMENSION CHART FOR BLADE FUSE BLOCKS
PN
Circuits
Cover
Negative Bus
[A] Width
in (mm)
in (mm)
[B] Mounting Centers in (mm)
[D] Mounting Centers in (mm)
[C] Height
Weight
lb (kg)
5025 6
Yes #10-32 stud 3.32 (84.20) 2.50 (63.50)
4.89 (124.31) 3.88 (95.58) 0.55 (0.25)
5026 12 Yes #10-32 stud 3.32 (84.20) 2.50 (63.50) 6.47 (164.39) 5.46 (138.66) 0.75 (0.34)
Cooper Bussman
Series 8000
BM Series
Limiter Blocks
• Used for 1/4" x 1-1/4" Fuses
• Flame retardant thermoplastic with spring
• Supplementary fuse block for use with any
• Used for ANL and ANN fuses
• Dimensions: 3.38"Lx.95"Wx1.62"H
• 2.43" Studs to center
• 125V AC, 80V DC
• 10-800A
bronze clips
13/32" x 1-1/2" fuses
• Cooper Bussman fuses: KTK, FNQ, FNM,
BAF, PV, and AGU
• 300V
• 25A
• Anti-rotation pin
• UL and CSA Rated
• 1 Pole
• 600V AC/DC
• 1/10-30A
• CE, UL, and CSA recognized
SERIES 8000
QUICK CONNECT
Item Number
SERIES 8000
SCREW CONNECT
Terminal
BM SERIES
LIMITER BLOCK
Poles
Price
Series 8000
S-8202-1
1
$5.82
S-8301-1Screw
1/4" Quick Connect
1
$5.70
S-8301-4Screw
4
$11.44
S-8301-8Screw
8
$18.60
BM Series Type M
BM6031SQScrew
1
$5.29
Limiter Blocks
4164
Stud Terminal
1
$18.95
Images are representative of products listed and may not be actual product.
88
www.wardsmarine.com