Indoor-Outdoor
Enclosures
with Provisions for Disconnect
SCE-XELLP Series
• Carbon Steel and 304 or 316L
Stainless Steel
• Seams Continuously Welded and
Ground Smooth
• Flange Trough Collar Around All
Sides of Door Opening
• Oil-Resistant Gasket
• Concealed Hinge and Removable
Center Post
• Removable and Interchangeable Doors
• 3-Point Latching Mechanism
• Removable Print Pocket
• 15" Removable Floor Stands
• Mechanical Interlock from Main to
Secondary Door
• Black Zinc Die Cast Coinproof/
Padlocking Handle on Main,
Padlocking Handle on All
Other Doors
These enclosures are available in 0.125" thick
carbon steel (0.104" thick door) with
ANSI-61 gray powder coated inside and out.
The sub-panels are powder coated white. The
stainless steel models are available in
0.104" thick 304 or 316L stainless steel,
with #4 brushed finish.
Disconnect switch (or circuit breaker and
operating mechanism) are not furnished
with this enclosure.
SCE-60XEL4912LP, NEMA 3R and 4
steel enclosure, 60 H x 49 W x 12" D.
Enclosures
The SCE-XELLP Series two door indoor/
outdoor electrical enclosures are designed
to house electrical and electronic controls,
instruments and equipment in areas which
may be regularly hosed down or are in very
wet conditions. These electrical control panels
provide protection from dust, dirt, oil and
water. This outdoor electrical control panel is
the solution for waterproof and weatherproof
applications. The enclosures are extra deep for
applications requiring more interior space.
Specifications
Industry Standards: IS3
NEMA Type: 3R, 12 and type 13
UL Listed Type: 3R and12
CSA Type: 3R and 12
IEC: 60529 IP55
Industry Standards: IS4
NEMA Type: 3R, 4, 12 and type 13
UL Listed Type: 3R, 4 and12
CSA Type: 3R, 4 and 12
IEC: 60529 IP66
Industry Standards: IS5
NEMA Type: 3R, 4, 4X, 12 and type 13
UL Listed Type: 3R, 4, 4X, and 12
CSA Type: 3R, 4, 4X, and 12
IEC: 60529 IP66
Type 3R Special Instructions apply for IS3 &
IS4 to maintain the environmental rating of
Type 3R for these parts. Instructions are
located on the enclosure door. Drip shield is
required on IS3, drip shield is recommended
on IS4. Drain holes are required on both
1
E
E
STANDARD DISCONNECTS:
cutout provided
F = 11.88 (301.7) when A = 72.00 (1828.8)
D1 A = 84.00 (2133.6)
F =DISCONNECTS:
17.38 (441.4) when
STANDARD
F
=
20.38
(517.6)
when(1828.8)
A = 90.00 (228.6)
F = 11.88 (301.7) when
A = 72.00
2.66
(67)
Ø 0.28 (7.14)
F = 20.38 U
(517.6)
A = 90.00
(228.6)
TYPEwhen
(Universal)
DISCONNECTS:
MTG. CHANNELS FOR
LIGHT FIXTURES
12.00
(305 )
0.5
(12.7)
AVAILABLE
AVAILABLE
DOOR SPACE
DOOR SPACE
F
2.875
(73) 0.5632.875
(73) 0.563
0.5
(14.3)
(14.3)
(12.7)
4.688
4.688
(119)
(119)
(186)
C - 4.69
(119)
A - 11.00
A - 11.00
(279)(279)
OPENING
OPENING
OPENING
7.50
(191) 7.50
(191)
3.00
(76 )
3.50
(89)
1.13
(29 )
1.13
(29)
12.00
(305 )
0.438
(11.13)
C - 4.69
(119)
3.00
(76 )
D
2.66
(67)
D
2.66
(67)
(204)
8.03
(204)
STANDARD DISCONNECTS:
F = 11.88 (301.7) when A = 72.00 (1828.8)
F = 17.38 (441.4) when A = 84.00 (2133.6)
F = 20.38 (517.6) when A = 90.00 (228.6)
1.07
(27)
U TYPE (Universal)
DISCONNECTS:
B
F = 17.63 (447.8)
AVAILABLE
DOOR SPACE
3.63
(92)
WIDTH B DEPTH C INDUSTRY
SUB-PANEL
HEIGHT
D
(B / 2) - 7.31
inch
inch
STANDARD (SOLD SEPARATELY)
inch
(186)
SCE-60P48
49
12
IS4
56
A - 11.75
(298)
SCE-60P48
49
18
IS4
56
6.75
SCE-60P481.07
49
24
IS4
(56
171 )
C
TWO
DOOR
ENCLOSURE
(27)
A
11.00
(279)
B 12
SCE-60P60
61
IS4 A
56
OPENING
TWO DOOR ENCLOSURE
SCE-60P60
61
18
IS4
56
REMOVABLE
SCE-60P60
61
24
IS4
56
CENTER
AVAILABLE
CHANNEL
DOORIS4
SPACE
61
12
68
F SCE-72P60
SCE-72P60
61
18
IS4
68
3.63
C - 1.38
(92
)
SCE-72P72
73
12
IS3
68
(35)
3.50
(B / 2) - 4.13 (105)
(B
/
2)
7.31
SCE-72P72
73
12
68
(89)
OPENING
(186) IS4
1.44
73
18
IS3
68
(377.50
) SCE-72P72
1.13
A
11.75
(191SCE-72P72
)
(2968
)
73
18(298)
IS4
SCE-72P72
73
24
IS3
68
6.75
C - 4.69
( 171 ) IS4
SCE-72P72
73
24
68(119)
A - 11.00 (279)
OPENING
OPENING
U TYPE (Univers
F = 17.63 (447.8)
6.00
(152 )
MTG. CHANNELS FOR
LIGHT FIXTURES
8.03
DESCRIPTION
Gray steel
drip shield 48" long
REMOVABLE
CENTER
Gray steel drip
shield 60" long
CHANNEL
Gray steel drip shield 72" long
Stainless steel drip shield 48" long
Stainless steel drip shield 60" long
/ 2) - 4.13
Stainless(Bsteel
drip(105)
shield 72"3.50
long
(89 )
STANDARD DIS
F = 11.88 (301.7)
F = 17.38 (441.4)
F = 20.38 (517.6)
MTG. CHANNELS FOR
LIGHT FIXTURES
To Order Visit omega.com/sce-xellp for Pricing and Details
HEIGHT A
inch
60
60
60
60
60
60
72
72
72
72
72
72
72
72
0.438
(11.13)
12.00
(305 )
6.00
(152 )
MODEL NUMBER
SCE-60XEL4912LP
SCE-60XEL4918LP
SCE-60XEL49124LP
SCE-60XEL6112LP
SCE-60XEL6118LP
SCE-60XEL6124LP
SCE-72XEL6112LP
SCE-72XEL6118LP
SCE-72X7312LP
SCE-72XEL7312LP
SCE-72X7318LP
SCE-72XEL7318LP
SCE-72X7324LP
SCE-72XEL7324LP
DRIP SHIELDS
A
MODEL NO.
SCE-DS48N4
SCE-DS60N4
SCE-DS72N4
SCE-DS48SS
SCE-DS60SS
SCE-DS72SS
1.312
(33.32)
E
E
3.50
(89 )
8.0
(203)
7.125
7.125
(181)
(181)
C - 1.38
(35)
7.00 (179)7.00 (179)
PADLOCKING
PADLOCKING
HANDLE HANDLE
WITH
WITH
COINPROOF
COINPROOF
REMOVABLE
REMOVABLE
CENTER
CENTER
CHANNEL
CHANNEL
0.438
(11.13)
1.312
(33.32)
1.44
(37 )
6.75 6.75
( 171 ) ( 171 )
(B / 2) - 4.13 (105)
(B / 2) - 4.13 (105)
OPENING
Ø 0.218
(7.14)
F
C - 1.38
(35)
1.44
(37 )
8.0
(203)
C
3.63
(92)
A - 11.75
A - 11.75
(298) (298)
0.438
(11.13)
1.250 (31.75 )
1.07
1.250C
(31.75 )
(27)
1.07
(27)
(B / 2) - 7.31
(B / 2) - 7.31(186)
Ø 0.218
(7.14)
U TYPE (Universal) DISCONNECTS:
F = 17.63 (447.8)
B
3.63
(92)
1.125
(28.58)
F = 17.63 (447.8)
Flange6.00
Mounted
Operator Handle and
12.00
)
(152 )(305
Operating
Mechanisms.
6.00
)
(152
“D1”
cutout
detail is the standard and
most commonly used cutout, a universal
disconnect cutout “D7”is also available,
add “U” to the end of the model number
for the D7 cutout.
A A
1.125
(28.58)
Dimensions:
inch
Ø 0.28 (7.14)
MTG. CHANNELS
FOR(mm)
F = 17.38 (441.4) when A = 84.00 (2133.6)
LIGHT FIXTURES
B
Universal disconnect
cutout
D7
Standard disconnect
2.66
(67)
F
WIDTH E
inch
1.44
44(37)
44
44
56
56
56
56
56
68
3.00
68(76)
68
68
68
68
D
7.00 (179)
PADLOCKING
HANDLE WITH
COINPROOF
7.00 (179)
PADLOCKING
HANDLE WITH
COINPROOF
3.00
(76 )
Note: “D1” cutout is standard, add “U” to the end of any model number for the “D7” cutout.
For 304 stainless steel insert “SS”,7.50
for 316L stainless steel insert “SS6”. Ex. SCE-60XEL4912SSLP, 304 SS enclosure. SCE-60XEL4912SS6LP,
8.03
1.13
316L SS enclosure
(204)
(191)
(29 )
Ordering Examples: SCE60XEL4912LP, NEMA 3R, UL Type 12 carbon steel flange-mount disconnect enclosure, 60 H x 49 W x 12" D, and
SCE-60P48, sub-panel for 60 x 49" enclosure, 56 H x 44" W.
SCE-72XEL6118SS6LP, NEMA 4X Outdoor 316L stainless steel flange-mount disconnect enclosure, 72 H x 61 W x 18" D, and SCE-72P60,
sub-panel for 72 x 61" enclosure, 68 H x 56" W.
2