NuTorque™ Electric Control Unit Mounting Instructions
Tools Required:
T-15 Torx Driver, 7/16" wrench, 3/8" wrench, 17/64" drill bit, power drill, and pencil.
NuTorque Electric Unit Mounting, StarDental Part# 264170, components:
1. 2. 3. 4. Control Unit
StarDental® Instrument Solutions
Attach mounting plate to bottom of unit using the 4 screws. See FIG 1
Determine a suitable mounting location: front, back, left, or right. See FIG 2
Use the suggested mounting position or manually determine a location.
To use the suggested mounting location, see FIG 3.
You may mount on the left or right.
Mounting Plate
Lock Nut (2)
Washer (3)
FIG 2
Screws (4)
Delivery Head
Mount
Washer
Knob
Spacer
1
Hex bolts (2)
5. To manually determine a mounting location,
assemble mount to control unit using knob and one
of the three holes in the mounting plate, see FIG 4.
Allow knob to remain loose so control unit is free to
rotate.
6. Position control unit in desired location. Press mount
flush against mounting surface. With a pencil, mark
the underside of mounting surface at three edges,
see FIG 4.
7. Loosen knob and remove control unit.
8. Align spacer with marks made from step 6.
Ensure hole location won’t interfere with internal
components at mounting position. Use the 17/64"
drill bit to drill two holes through mounting surface
at spacer hole location.
©
FIG 1
9. Place bolts through mount, spacer
and bottom side of mounting
surface, see FIG 6.
10.Secure mount using two washers
and lock nuts, see components
illustration in block 1.
FIG 3
Mount may be
oriented upward
or downward
FIG 6
FIG 4
11. Secure control unit to mount with
knob and washer, see FIG 7.
FIG 5
FIG 7
4
3
StarDental®
1816 Colonial Village Lane
Lancaster, PA 17601 U.S.A.
Printed in the U.S.A.
2016 – DentalEZ, Inc.
064037 D Date of Issue: 2016/03/28
2
EC REP
StarDental® Instrument Solutions
For new products, manuals and technical information, call
1-866-DTE-INFO or visit our web site @ www.dentalez.com.
DentalEZ Dental Products(GB) Ltd.,
Cleveland Way,
Hemel Hempstead, Hertfordshire
HP2 7DY, ENGLAND