tnb06_wrtrm_seca_p152_153 8/9/07 9:15 AM Page A-153 Metal Clad Cable, Armored Cable and Flexible Metal Conduit Fittings The easiest and best connector to install when making sharp bends at the enclosure or equipment! ® TITE-BITE® Connectors — 90° Angle Nylon-Insulated Steel or malleable iron. Available with or without insulated throat, this connector line isiron by far the easiest •Tite-Bite Steel® or malleable construction and best to install when making sharp bends at •theOffers all or ofequipment. the advantages the enclosure It has all of of the straight ofconnector only with oneonly screw advantages the straightwith connector onetoscrew to tighten, except in the largersizes, sizes tighten, except in the larger where therehave are two. which twoA peep hole on top provides for easy inspection of the ABC bushing. •Narrow Peepdesign hole makes on topit provides for easy to install easy inspection ABC bushing connectors in adjacentof knockouts. • Narrow design makes it easy to install connectors in adjacent knockouts CAT. NO. CABLE OPENING MAX. MIN. 3130-TB# 3132# 3135# 3137# 3138*** 3139*** 3140*** 3141*** 3142*** 3143††† 3144-TB*** .660 .937 1.093 1.468 1.750 2.031 2.500 3.062 3.562 4.060 4.560 .470 .750 .906 1.250 1.562 1.812 2.312 2.812 3.312 3.620 4.120 TRADE SIZE K.O. SIZE A† ⁄8" ⁄2" 3 ⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4" ⁄2" ⁄2" 3 ⁄4" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4" 111⁄32 17⁄8 21⁄8 221⁄32 35⁄16 4 415⁄16 69⁄32 711⁄32 — — 3 1 1 1 ® DIMENSIONS (IN.) B C ***UL Listed for flexible metal conduit only. CSA File No. 2884 †Approximate dimension with screw at minimum height. TITE-BITE ® Connectors* — 90° angle †††Not UL Listed or CSA Certified. # Approved for Metal Clad Cable 119⁄32 25⁄16 21⁄8 21⁄8 39⁄32 41⁄8 51⁄16 6 71⁄16 — — ⁄16 ⁄16 9 ⁄16 1 ⁄2 9 ⁄16 11 ⁄16 11 ⁄16 3 ⁄4 3 ⁄4 — — 15 15 UL File No. E 23018 Angle clip provides secure mechanical grip that tightens under tension or vibration! ® TITE-BITE® Connectors — 90° Angle • Throat is long enough to install in cast housing knockouts • 3⁄8" and 1⁄2" sizes of steel construction • 3⁄4" and larger sizes made of malleable iron • Unique saddle design firmly secures cable in place, provides holding power in excess of listing agency requirements, and assures high quality bonding. • Removable bushing design covers wide range, reduces inventories. • Can be used on smooth or corrugated aluminum sheathed and • Can on smooth or corrugated steelbeMCused cable. aluminum sheathed and steel MC cable • One screw provides quick • One-screw installation.design enables quick installation CAT. NO. CABLE OPENING MAX. MIN. 321-TB# 323# 325# 326-TB# 327-TB*** 328*** 329*** 330-TB*** 331*** .660 .937 1.093 1.468 1.750 2.031 2.500 3.062 3.562 .470 .750 .906 1.250 1.562 1.812 2.312 2.812 3.312 ***UL Listed for flexible metal conduit only. †Approximate dimension with screw at minimum height. UL File No. E 23018 ® TRADE SIZE K.O. SIZE A† ⁄8" ⁄2" 1 ⁄2" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" ⁄2" ⁄2" 1 ⁄2" 1" 11⁄4" 11⁄2" 2" 21⁄2" 3" 111⁄32 17⁄8 21⁄8 221⁄32 31⁄8 41⁄8 43⁄8 61⁄2 525⁄32 3 1 1 1 DIMENSIONS (IN.) B C 11⁄2 23⁄8 21⁄8 21⁄8 35⁄8 41⁄8 431⁄32 6 7 ⁄8 ⁄32 1 ⁄2 1 — — — — — 3 17 CSA File No. 2884 # Approved for Metal Clad Cable Unique saddle design firmly secures cable in place, provides holding power in excess of listing agency requirements and ensures high-quality bonding! ® TITE-BITE® Aluminum Sheathed Cable Connectors CAT. NO. DIA. RANGE ALUM. SHEATH (IN.) 2492 HUB SIZE (.370–.500) UL Listed as a grounding means for steel MC cable and ALS. For dry location. UL File No. E 38947 United States Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354 ® Canada Tel: 450.347.5318 Fax: 450.347.1976 ⁄2" 1 CSA File No. 589 Tite-Bite® Connectors are approved for continous sheathed corrugated MC cable. Technical Services Tel: 888.862.3289 www.tnb.com A-153