Standard sets
MFP1 fixed
point set
MFP1
anchor
point set
Technical Data
Recommended Load in direction of axial pipe Frec. 3 kN
Support height until overside of pipe
H min = 170 mm
H max. = 1200 mm
Fastening
A = suitable anchor M12
B = suitable anchor M16
MFP-NW...
MFP-BP 20
Ordering designation
Item no.
MFP pipe ring as per desired pipe size
MFP-BP20 basic set
MFP-AP1 bracing set
Fixed point support 11/4”
00247827
00247829
00248532
MFP-AP1
(overside of pipe)
H = 170 mm
H = 1200 mm
min
max
MFP 1a fixed point set
Technical Data
Recommended Load in direction of axial pipe F rec.
F rec. is decreasing with increasing support height.
Support height until overside of pipe
H min. = 140 mm
H max. = 800 mm
Fastening
A = suitable anchor M12
(overside of pipe)
H = 140 mm
H = 800 mm
MFP-NW...
min
max
MFP-BP20
Ordering designation
Item no.
MFP pipe ring as per desired pipe size
MFP-BP20 basic set
Fixed point support 11/4”
00247827
00248532
MFP 2 fixed point set
(overside of pipe)
H = 140 mm
H = 1200 mm
Technical Data
Recommended Load in direction of axial pipe F rec.
10 kN
Support height until overside of pipe
H min. = 140 mm
H max. = 1200 mm
Fastening
A = suitable anchor M12
C = suitable anchor M16
max
MFP-BP 20
Ordering designation
Item no.
MFP pipe ring as per desired pipe size
MFP-BP 20 basic set
MFP-AP 2 bracing set
Fixed point support 11/4”
00247827
00247830
00248532
MFP 3 fixed point set
Technical Data
Recommended Load in direction of axial pipe F rec.
20 kN
Support height until overside of pipe
H min. = 250 mm
H max. = 1200 mm
Fastening
A = suitable anchor M12
C = suitable anchor M20
MFP-NW...
min
MFP-AP2
(pipe centreline)
H = 150 mm
H = 1200 mm
MFP-NW...
Ordering designation
Item no.
MFP-BP16
MFP pipe ring as per desired pipe size
MFP-BP16 basic set
MFP-AP3 bracing set
Fixed point support 11/4”
00247826
00247831
00248532
min
max
MFP-AP3
Given loads only apply if Hilti HST anchors are used. If the direction of force is not known,
or changing, the fixed point must be braced on both sides. If the force at the fixed point is
greater than 10kN, weld stops on the bracing side of the pipe.
1) Given values apply only to use of HST anchors. Contact our Technical Advisory Service
for more information.
XXXIJMUJDPVL]
XXXIJMUJJF]
MFP pipe ring
QRST 37 steel, galvanised, M 20 connection boss
Pipe size
(mm)
15
20
28/30
25
32
40
54/56
50
63/66
68/72
65
80
100
(inch)
/
/
1
2
3
4
1
11/ 11/ 4
2
2
21/ 3
2
4
125/137
125
150
5
6
193/200
200
244/250
250
8
Dimensions
D (mm)
B (mm)
Box
contents
Ordering
designation
Item no.
S (mm)
21– 22
25– 27
28– 30
33– 35
42– 45
47– 50
54– 56
57– 61
63– 66
68– 72
75– 79
88– 90
108– 112
110–115
125–127
133–140
158–162
165–169
193–200
219
244–250
267–273
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
128.3
134.3
138.0
142.7
154.5
160.3
167.0
170.8
176.3
182.9
196.2
207.9
231.4
234.6
245.1
262.0
282.5
299.8
322.4
342.8
373.9
397.6
12
12
12
12
12
12
12
12
12
12
12
12
6
6
6
6
6
6
6
6
3
3
MFP-NW 15
MFP-NW 20
MFP-28/30
MFP-NW 25
MFP-NW 32
MFP-NW 40
MFP-NW 54/56
MFP-NW 50
MFP-63/66
MFP-68/72
MFP-NW 65
MFP-NW 80
MFP-NW 100
MFP-NW 4
MFP-NW 125/127
MFP-NW 125
MFP-NW 150
MFP-NW 6
MFP-193/200
MFP-NW 200
MFP-244/250
MFP-NW 250
00243521
00243522
00243523
00243524
00243525
00243526
00243527
00243528
00243529
00243530
00243531
00243532
00243533
00243534
00243535
00243536
00243537
00243538
00243539
00243540
00243541
00243542
MSG and MRG gliders
Description
Coefficient of friction
Glider MSG 1.0 M8/10
Glider MSG 1.0 M12/16
Glider MSG 1.75 M8/10 Double Boss
Glider MSG 1.75 M12/16Double Boss
Glider MRG 2.0 M10/12
Glider MRG 4.0 M10/12
Max. allowable load Frec kN Max. Movement (mm)
µ = 0.18
µ = 0.18
µ = 0.18
µ = 0.18
µ = 0.08
µ = 0.08
Hilti System
Item no.
1.0
1.0
1.75
1.75
2.0
4.0
± 40
± 40
± 45
± 45
± 80
± 60
00248205
S 00248206
S 00248209
00248210
00243550
00243551
Swivel Hangers
Features
n Designed for use with Hilti MP pipe ring programme
n Suitable for installation on ceilings or floors
n Resistant to temperatures up to 130°C
n Small height
n Slide cannot pull out
M8 swivel rod hanger PA-K8x8
M10 swivel rod hanger PA-K10x10
100
100
00047392
00047393
Accessories
Ordering designation
Package contents
Item no.
MFP-BPI 20 basic package
1
254460
Ordering designation
Package contents
Item no.
1¼" × 2 m (fixed point connector)
M16 threaded rod, grade 4.6, galvanised
5
1
248532
216424
XXXIJMUJDPVL]
XXXIJMUJJF]
M
L
S– PLEASE ASK FOR DELIVERY DETAILS.
!