SPECIFICATION FOR PROGRAMMABLE DC POWER SUPPLIES S/N DESCRIPTION / SPECIFICATIONS REQUIRED BY LRDE SPECIFICATIONS OFFERED BY SELLER REMARKS / DEVIATIONS To be entered only in Price bid UNIT PRICE Specification Power supply 1 Power supply 2 Power supply 3 1. Number of outputs 1 1 4(two outputs with 8V and two outputs with 35V) 2. Quantity required 2 2 1 3. Max Voltage 15V 40V 4. Current @ any Voltage 200 A 80 A 12.5 A 3A 5. Maximum Current at 40 V NA 80 A NA NA 6. Maximum Current at 28 V NA 80 A NA 3A 7. Maximum Current at 12 V 200 A 80 A NA 3A 8. Maximum Current at 8 V 200 A 80 A 12.5A 3A 9. Maximum Current at 5 V 200 A 80 A 12.5A 3A 10. Maximum Current at 3.3 V 200 A 80 A 12.5A 3A 11. Output ripple CV P-P @ 20 MHz 75 mV 75 mV 12 mV 15 mV 12. Output ripple CVrms (5Hz to 1MHz) 10 mV 10 mV 2mV 5mV 13. CV load regulation 10 mV 15 mV 6 mV 11 mV 14. CC load regulation 60 mA 30 mA 2 mA 2 mA 15. CV line regulation (170 to 265 V AC), constant load 5 mV 10 mV 2 mV 4 mV 8V 35V COST PRICE 16. CC line regulation (170 to 265 V AC), constant load 50 mA 15 mA 1 mA 1 mA 17. Load transient recovery time* 1 ms 1 ms 200s 200s * Time for output voltage to recover within 0.5% of its rated output for a load change 10% to 90% of rated output current. For power supply 3 voltage settling band of ± 0.2v/0.3V 18. Programming Accuracy voltage 0.05% + 10 mv 0.05% + 25 mv 0.1% + 19 mv 0.1% + 35 mv 19. Programming Accuracy current 0.1% + 500mA 0.1% + 300 mA 0.15% + 10mA 0.15% + 4mA 20. Measurement Accuracy voltage 0.1% + 20 mv 0.1% + 50 mv 0.1% + 20 mv 0.1% + 35 mv 21. Measurement Accuracy current 0.1% + 750 mA 0.1% + 300mA 0.15% + 20mA 0.15% + 4mA 22. Programming command response time 100 ms 100 ms 1 ms 23. Up program response time* 100 ms 100 ms 20 ms 20 ms 24. Down program response time (No load)** 800 ms 1000 ms 100 ms 100 ms 25. Down program response time (Full load)* 120 ms 180 ms 100 ms 100 ms * From 10 % to 90% or 90% to 10% of rated output voltage, with rated resistive load ** From 90% to 10% of rated output voltage 26. Over voltage protection 1 - 18 V 2 – 44 V Upto 10 V Upto 38.5V 27. Programming Measurement voltage Resolution 2 mV 5 mV 4mV 10mV 28. Programming Measurement current Resolution 40 mA 15 mA 4 mA 2 mA 29. Front panel display voltage 2 decimal digits 2 decimal digits 3 decimal digits 3 decimal digits 30. Front panel display current Accuracy 1 decimal digits 1 decimal digits 3 decimal digits 3 decimal digits 31. Front panel display voltage Accuracy 100 mV 400 mV NA NA 32. Front panel display current Accuracy 1200 mA 500 mA NA NA 33. Voltage Temperature stability*** 10 mV 25 mV NA NA 34. Current Temperature stability*** 150 mA 50 mA NA NA 35. Voltage Temperature coefficient**** 100PPM/0 C 100PPM/0C 0.01% + 0.1mV 0.01% + 0.2mV 36. Current Temperature coefficient**** 200PPM/0 C 200PPM/0C 0.01%+ 0.5 mA 0.01%+ 0.05mA 37. Analog voltage programming (resistor)***** 0-100% with 0 to 10KOhm 0-100% with 0 to 10KOhm NA NA 38. Analog current programming (resistor)***** 0-100% with 0 to 5K/10K Ohm 0-100% with 0 to 5K/10K Ohm NA NA 39. On/OFF control Controlled by voltage ( 0 to 0.6V ON/ 2 to 15 V OFF) YES 40. Power supply OK TTL HIGH OK NA *** Over 8 hour period, after a 30 minute warm-up with constant line, load and temperature **** After 30 minute warm up time (compared from rated output) ***** Accuracy and linearity(±1% of rated voltage and ±1.5% of rated current) 41. Parallel Operation Upto two units Upto two units Upto two units Upto two units 42. Series Operation Upto two units Upto two units Upto two units 43. GPIB (SCPI-1993,IEEE 488.2 compliant interface or better) Required Required Required 44. 10/100 LAN Required Required Required 45. Relevant GUI programming software for all the ports Required Required Required 190V240V 1 Ø, 50 Hz 190V-240V 1 Ø, 50 Hz 190V-240V AC, 1 Ø, 50 Hz 46. AC Input 47. Input VA Max. 4000 VA 4000 VA 1500 VA 48. Power factor 0.97 0.97 NA 49. Input current Max. 25 A 25 A Upto two units NA 50. Operating Temperature 0 to 40 C @ full load 0 to 40 C @ full load 0 to 550C @ full load 51. Efficiency 80% 80% 80% 52. Inrush current 50 A 50 A NA 53. Dimensions(maximum dimensions) ( except connectors and handles) 100 mm * 500 mm * 500 mm 100 mm * 500 mm * 500 mm 44.45mm * 432.5mm * 585.6mm 54. weight ≤ 18 Kgs ≤ 18 Kgs ≤ 16 Kgs 55. Ability to be mounted on a single rack 0 0 Yes (All NA* four power supplies should have provisions to mount on a single rack) * NA stands for not applicable or Details are provided in the specifications following 56. the table. Complies with European EMC directive 89/336/EEC for class A test and measurement products Required Required Required 57. Complies with European low voltage directive 73/23/EEC and carries CE marking Required Required Required 58. LED’s used are Class 1 LED,s as per IEC 825-1 Required Required Required 59. Power supply 1(Quantity: 2) and power supply 2 (Quantity: 2) should have the option of mounting on a single rack. 60. All the power supplies should have provisions to mount on a rack. 61. All the necessary power cards, GPIB cable cables and LAN cable (20 meters length) to be provided for each power supply. 62. All the necessary documentation to be provided. And Compliance chart to be provided. 63. Five year warranty with yearly inspection/calibration of power supplies to be quoted. If the warranty cost is quoted, the warranty amount will be paid yearly (after successful completion). 64. The power supply 3 should be equivalent to Agilent N 6701 A Mainframe with two N6742 B power modules and two N 6744B power modules. 65. The supplier should be a reputed one (should quote from a reputed manufacturer utilizing good quality proven components) and should have supplied similar items to DRDO (Defense Research & Development Organization) or other government organizations. Details to be included in the tender. 66. Delivery to be within 3 Months. List of deliverables:- 67. Sl No. Item Description 1. Low-Profile Modular Power System with 2 Nos. of DC Power Module 8V,12.5A & 2 Nos. of DC Power Module 35V,3A & Quantity 1 Unit 2. DC Power Supply 40V, 80A 3. DC Power Supply 15V, 200 A 4. Interface Card, High Performance PCI Express to GPIB 5. GPIB cable, 2 meter 2 Units 2 Units 1 No. 4 Nos. The vendor should indicate point-to-point compliance for the full specification Only original equipment manufacturers or authorized representatives with certificate from OEM should be quoted The vendor should furnish the details of similar items supplied earlier with evidence Note:1) 2) 3) 4) The above format to be submitted in duplicate after duly filled/ but price information to be given in only one copy. The copy of above format without price information should be enclosed to techno-commercial bid The copy with price information must be enclosed to price bid only Disclosure of price information in Techno-commercial bid will lead to rejection of the quote. Contact details for further information:i) Hemprasad Ghanta, Sc-‘C’ , C-RADAR, LRDE, C.V.Raman Nagar, Bangalore-93. PH NO: 080-25025503, FAX: 080-25245234 Or ii) Pramod Kumar, Sc-‘D’, C -RADAR, LRDE, C.V.Raman Nagar, Bangalore-93. PH NO: 080-25025514, FAX: 080-25245234