1-404 Air Dry Clear Coat

advertisement
1-404 Air Dry Clear Coat
GENERAL INFORMATION:
1-404 Air Dry Clear Coat is a polyurethane rapid drying air dry clear coat for wet on wet application; so it does not require a flash time between coats. Offers a fantastic
appearance with superior flow and leveling. For application over WaterBase 900⁺ Series and BeroBase 500 Series, suitable for passenger cars.
COMPONENTS:
1-404
47-440
47-460
1-141
1-151
1-161
1-171
1-231
FLASH OFF & DRY TIMES:
Air Dry Clear Coat
Air Dry Hardener Medium
Air Dry Hardener Slow
Uni Thinner Fast
Uni Thinner Medium
Uni Thinner Slow
Uni Thinner Very Slow
Fade-Out Thinner
Air Dry
20˚C
(68˚F)
Hardener
Dust free
(min.)
Dry to handle
(min.)
Dry to polish
(min.)
47-440
10
30
30-60*
47-460
10
40
60-120*
* Depending on the layer thickness and temperature
CLEAN UP:
SUBSTRATES:
1-051 Gun Cleaner
BeroBase 500 Series (MM 500-599)
WaterBase 900⁺ Series (MM 900-999)
PHYSICAL DATA:
SURFACE PREPARATION:
Base coat should be fully dry.
MIXING RATIO:
4 : 1 + 0-5%
Clear Coat : Hardener + 0-5% Uni Thinner
ADDITIVES:
47-39
2K Elastic (information see TDS)
POTLIFE at 20°C (68°F):
Potlife (min.)
EU regulations
n.a.
VOC code
Product sub category (according
directive 2004/42/EC) and max VOC
n.a.
content (ISO 11890-1/2) of the ready to
use product
Physical properties
Chemical Base:
Specific grafity
1-404
Flash point closed cup
Vol. % solids
Viscosity
Economy
Ready to spray
Gloss
Colour
Hydroxy acrylic resins.
0,958 g/l
15°C
34%
<15 sec Din Cup4 20˚C (68˚F)
7m²/L/50 μm
High Gloss
Clear
STORAGE /SHELFLIFE:
47-440
60
47-460
120
1-404
Air Dry Clear Coat
min. 2 years
(Under normal storage conditions and unopened tins)
GUN SET UP:
HVLP
HE
Pressure pot
Nozzle size
(mm)
1,3-1,5
1,3-1,5
-
Spraying pressure
(bar/psi)
1,5-1-8 / 22-26
1,5-1-8 / 22-26
-
APPLICATION:
2 full coats
45-75 µm (1.8-2.2 mil)
No flash-off between coats, apply two full wet coats.
1-404
(ROW)
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this information should serve only as a general guide. Valspar assumes no obligation or liability for use of this information. UNLESS VALSPAR AGREES OTHERWISE IN WRITING,
VALSPAR MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. VALSPAR WILL NOT BE LIABLE FOR
ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this product is the replacement of the defective product, or a refund of its purchase price, at our option. © 2012 The Valspar Corporation. All rights reserved.
Revision date: 14-3-2014
Download