HEAVY DUTY COTTERLESS POLE TRAILER SPECIFICATIONS
27,600 lbs. GVWR - 21,100 lbs. Payload
34,600 lbs. GVWR - 27,600 lbs. Payload
46,000 lbs. GVWR - 38,500 lbs. Payload
Exclusive Standard Added Value:
•
•
•
•
Cotterless 3 Point Contact Tongue-Securing Rod for Safety and Ease-of-Use and Low Wear
Hardened AR Plate Reinforced Rod Entry Area and Protective Housing to Prevent Hole Ovaling
(4) Four Top and Bottom Oversized Precision Rollers for Easy One Man Tongue Extension (See Website
Video…No truck needed to extend tongue)
Reelstrong Increased Size Male and Female Tongue for Less Bending/Twisting
HEAVY DUTY COTTERLESS POLE TRAILER SPECIFICATIONS
GVWR
•
•
•
(2) Two 12K axles - 27,600 GVWR - 21,100 payload
(2) Two 15K axles - 34,600 GVWR - 27,600 payload
(2) Two 20K axles - 46,000 GVWR - 38,500 payload
Overall Width
•
96” (customizable)
Pole Seat Height
•
37”
Cargo Bed
•
(4) Four 33” x 22” Cargo Bed Compartments
Wheels
•
Dual 6.75 x 17.5
•
Front and Rear Extensions For 60/40 tongue weight control
•
(8) Eight position Retracted/Extended Lengths 30’ - 53’
•
Oil Bath Hubs (Greaseable Optional)
•
Electric Brakes
•
EZ Slide No Bind Stanchions (Lever-lock Stanchions Optional)
•
Slipper Springs
•
Reinforced Spring Hangers
•
Pole Rests: 5” H Beam (Lever Lock Stanchions opt.)
•
Front Pole Rest: 5” H Beam (Lever lock Stanchions
opt.)
•
Winch Binders, Racheting Breaker Bar and Bar Pocket
•
16’ L x 4” W x 12,000 lbs. nylon straps
•
Heavy Duty 6” x 6” x 1/4” wall male extendable tongue
•
Heavy Duty 7” x 7” x 1/4” wall female structural tube
Standard Features
Pole Securement
Standard Trailer Body
•
•
Oversized Precision Rollers w/ Bronze Bearings
- All specications/designs subject to change without notice - All GVRW’s & reel capacities are de-ratable to your needs
HEAVY DUTY COTTERLESS POLE TRAILER SPECIFICATIONS
Standard Trailer Body
(continued)
• 6 Position Adjustable Hitch
• 3/8” x 36” L GR70 Yellow Zinc Safety Chains with Hooks
• Removable Male Extension Tongue
• 12,000 lbs. Static Jacks w/ Spring Return
Front Pole
Seat Options
(Mounted on
Male Tongue)
Wiring
• 60” wide 3” Dual C-channel Pole Seat w/ lever lock stanchions
in lieu of 46” standard seat)
• 96” wide 4” Dual C-channel Pole Seat w/ lever lock stanchions
in lieu of 46” standard seat)
• DOT/ICC approved LED lights and conspicuity reflective tape
• Internal Cat Track protects wiring (and Air Brake line if applicable)
• Removable rear access door for cat track and wiring access
• Sealed beam, rubber mounted stop, turn, tail and marker lights
• Wiring harness terminated in junction boxes with heat shrink
connectors (soldering optional)
• Breakaway kit with absorbed glass matt (AGM) battery
Paint
• Seams caulked
• Rust preventative two-part epoxy zinc-rich primer
• (2) Two Two-part acrylic polyurethane topcoats (standard colors:
CAT yellow or White)
Options
• Air Brakes (Air lines plumbed internally with rubber protected insertion
points)
• Anti-lock brakes (ABS) w/ spring brakes & autoslacks
• Truck/Trailer electric wiring socket: Customer Choice
• Sliding Stanchions
• 3” lunette eye
(CONTINUED)
- All specications/designs subject to change without notice - All GVRW’s & reel capacities are de-ratable to your needs
HEAVY DUTY COTTERLESS POLE TRAILER SPECIFICATIONS
Options
(continued)
Optional Light Bar
•
Sliding Stanchions
•
Wiring soldered and sealed w/ heat shrink tubing
•
Jack handle extension for full width (96”) front bolster
•
Wheel chocks and holders. Holders dims 7”H x 10”L x 8”W
•
Spare Tire & Mount
•
Cargo Bed w/ 12 gauge steel floor with drainage/clean-out holes
•
D-Rings for Cargo/Transformers
•
Front removable/adjustable pole seat: 46” wide pole seat
mounted on male tongue
•
Solar Charged Breakaway Kit
•
All Weather Grip Strut Wheel Chocks
•
Rubber Wheel Chocks
•
Painted Cat Yellow
•
Contains (2) 2” stop-turn-tail round rubber mounted sealed
beam LED lights (4 light optional)
•
(3) Three center ID marker lights
•
(2) Two side marker lights.
•
Light bar attached to the pole with 2” heavy duty ratchet strap
•
25’ Standard electric cable length with 6-Way Aluminum Die
Cast Connector (longer cables provided upon request)
- All specications/designs subject to change without notice - All GVRW’s & reel capacities are de-ratable to your needs