Suspended “Permanent
Magnet” Magnetic Separators
Series: RBM
Magnet suspension
height adjustment
Stainless steel tramp
metal collection pan
Optional custom pre-sized
heavy gauge tubular frame
assembly shown
Stainless steel magnet
enclosure with high
gradient (2) pole magnet
working surface
Application: MPI’s Receiving Belt Magnets
(RBM series) remove both large and small types of
tramp metal from product streams conveyed by belts for
speeds up to 200 - 300 feet per minute. The captured
tramp metal accumulates across the entire magnetic
face, substantially increasing the amount of tramp iron
the magnet can retain before cleaning is required.
Operation: MPI’s RBM series magnet consists of a
large plate magnet mounted inside a support frame
and suspended over the conveyed product stream.
The receiving belt magnet should be suspended
approximately 5” - 8” above the product stream for
optimum tramp metal removal. The magnet should be
Have a question about Metal Control
or Material Handling Products?
Magnet Man
Ask the
MPI Exclusive
Magnet is quickly cleaned with
easy-to-use winch that slides
collection tray across magnet’s
face.
Model shown
RBM-24
located in an area that has easy access to allow for
proper maintenance. Also, the magnet should operate
in an area of the belt where no integral parts of the
conveyor can become magnetized, such as idler rollers
or belting support plates, as this may cause excessive
wear on the conveyor system.
To clean the magnet, simply turn the collection pan
winch to draw the pan across the magnet face. The pan
retains the tramp metal as it is removed from the magnet.
Once the pan is drawn entirely across the magnet face,
it can be removed, emptied and re-installed on its track
and positioned back to the magnet’s far side.
Please visit our website at:
www.MPIMAGNET.com
For more products and information
Protecting and Moving the World
through Innovation
END VIEW
48”
B
D
33”
Product Flow
A
SIDE VIEW
Note: Specifications subject to change
C
IMPORTANT! Be sure to specify dimensions “ C ” and “ D ” when requesting quotes or placing orders for units
with optional support frame assembly.
RBM SERIES SELECTION CHART
RBM
MODEL
NUMBER
BELT WIDTH
MAGNET WIDTH FRAME WIDTH
DIMENSION “A” DIMENSION “B” DIMENSION “C”
IN.
CM
IN.
CM
RBM-18
24
61
18
46
RBM-24
30
76
24
61
RBM-30
36
91
30
76
RBM-36
42
107
36
91
RBM-42
48
122
42
107
Standard features:
• Permanent ceramic 8 magnet will not demagnetize,
create heat or require electricity to operate
• Stainless steel enclosed magnet
• MPI exclusive winch-operated magnet cleaning
system
• Magnet’s support bolts allow 12” of vertical height
adjustment over belt
OUTSIDE
DIMENSION
OF EXISTING
IDLER ROLLER
SUPPORT
FRAME
SUPPORT
HEIGHT
DIMENSION “D”
25” PLUS
DISTANCE
FROM FRAME
SUPPORT
MOUNTING
POINT TO A
POINT 6”
ABOVE CENTER
OF BELT
APPROX. UNIT
WEIGHT
LBS.
KG
950
432
1300
591
1600
727
1900
864
2300
1045
• Stainless steel collection pan for quick magnet cleaning
• Rugged all-welded construction
• Five standard sizes available
Optional features:
• Self-cleaning models
• Custom support frames
• Available without support frames
• Heavy-duty sanitary design support frame
-Custom Sizes & Configurations Available-
For more information, please contact your local sales representative or our customer service representatives at
1-800-544-5930 or info@mpimagnet.com.
Magnetic Products Inc.
P.O. Box 529 • 683 Town Center Dr. • Highland, MI • 48357
toll free :
PRODUCT BULLETIN GROUP: 102
SERIES: RBM, REV. 4/13
© COPYRIGHT 2013 MPI
800-544-5930 • 248-887-5600
fax : 248-887-6100
E mail :
info@mpimagnet.com
www.mpimagnet.com
DISTRIBUTED BY: