UPTIME
INSPECTIONS
Minimize your downtime with UPTIME!
It makes a pretty picture sitting there...
but it sure doesn’t make you much money.
Schedule your on-site
UPTIME inspection today.
Online at www.jennerag.com
OR Call 800-637-1692 #4
 Full visual/mechanical inspection
 Complete assessment within 7 days
 Schedule online to get 5% off parts &
labor for any repairs your inspection
finds!
 Receive 90 days interest free with your
CNH Industrial Capital Credit Account
Minimize your downtime with UPTIME!
complete on-site inspections–lock in your rate
Lock down your in-season service rate today! In-season rates are $134 a hour. Receive a $10 discount on service rate with your Uptime inspection. This discounted rate will lock you in for 1 spring and 1 fall season (Fall: 9/1-10/31, Spring: 4/1-6/30).
PATRIOT
Plus visual inspection:
Mechanical inspection includes:
• Check charge pressure
• Check flush flow
• Inspect wheel hubs
• Refill wheel hubs
• Change gear increaser lube (4260, 44XX, 33XX)
• $850 with 5% discount on parts as result of inspection
Hydraulic Hoses
Hydraulic Cylinders
Liquid Plumbing
Booms
Tilt Cylinder Clevis
Nozzle Bodies
Frame
Axle Bolts & Pins
Struts & Bearings
Steering Bearings
Rims
Cab Gauges
Lockout Buttons
Hydrostat Lever/
Adjusted
Throttle Lever/
Adjusted
Hub Inspection/ Drained
Brakes
Shocks
Ladders
Product Pump
Mirrors
Field Lights
Turn Signals
Additional parts/labor requested are extra.
Plus visual inspection:
Steering Condition
Transmission Oil Condition
Brake Condition/
Adjustment
Transmission and
Breather
Drain Air Tanks
Frame Condition
Radiator Level/
Condition
Driveline Condition
Steer Coupler Splines
Rear End Breather
Engine Belts/
Accessories
Cab Controls
Engine Oil
Filters
Engine
Fuel
Water
Hydraulic
Air
TITAN CHASSIS
Mechanical inspection includes:
• All models: Service rear axle fluids and change auxiliary
transmission fluid
• 3 wheelers: Grease & torque front spindle bearings and
grease front axle bearings
• 4 wheelers: Lube & torque front axle bearings; toe-in check
& adjustment if necessary
• $700 with 5% discount on parts as result of inspection
Additional parts/labor requested are extra.
NEW LEADER
Mechanical inspection includes:
• Service hydraulic filters & conveyor chain case with new
elements and gear oil
Plus visual inspection:
Belts
Drive Shaft
Hydraulic Motors
Hoses
Hydraulic Blocks
Bearings
Fans
Steel Hydraulic Tubes
Wire Harnesses
• Tension main conveyor chain (not MP)
• Single Bin: $450 MultApplier: $550
Spread pattern test additional $200. Adjustment & acceptance of proper spread
pattern is customer responsibility.
• 5% discount on parts as result of inspection
Additional parts/labor requested are extra.
Plus visual inspection:
Belts
Augers
Pneumatic Systems
Hydraulic Condition
Frame
Cylinders
Rollers
Boom Structure
Monitor Operation
Boom Tubes
Drive Shafts
FLEX AIR
Mechanical inspection includes:
• Service hydraulic filters
with new elements
• Check nozzle deflector
patterns
• $800 with 5% discount
on parts as a result of
inspection
Additional parts/labor requested are extra.
ADX AIR CART
Mechanical inspection includes:
• Check tension on fan belt
• Replace inline hydraulic
filters
• Grease unit
• Clean tank/meter assemblies
• Customizable to fit your
needs
• $400 with 5% discount
on parts as result of
inspection
Plus visual inspection:
Fan Belt
Roller Assemblies
Lights
Air Box Seals
Electrical Operation
Controller Setup
Additional parts/labor requested are extra.
Must have tractor and Agri-Check/Pro 600/Pro
700 controller hooked up to Air Cart to perform
Inspection. $200 charge to hook up or return to
complete inspection.
Because you can’t put a price on uptime!
SAVE 5% ON PARTS & LABOR
FOR REPAIRS WHEN YOU SCHEDULE ONLINE
To schedule: www.jennerag.com/service OR 800-637-1692 #4