LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 1 03.24.16
Hi-lume® Premier 0.1% EcoSystemTM / 3-wire
Constant Voltage 24 V- LED Driver with
Soft-on, Fade-to-BlackTM
The Hi-lume® Premier 0.1% Constant Voltage Driver
(L3D0) is a high‑performance LED driver capable of
controlling up to 96 W of 24 V- constant voltage
loads. This driver provides smooth and continuous
dimming down to 0.1% low-end. It is ideal for use with
strip lighting in applications such as coves, under or
over cabinet lighting and pathway lighting. The driver is
UL® Listed with an integrated wiring compartment.
m
lutron.co
Hi-lume
®
Premier
0.1%
W24V-U
L3D0-96
er
Driv
-Black TM
age LED
, Fade-toire Constant Volt
r DEL
noir
stante pou
fondu au
e doux, 3-fil tension con
)
te
88.7661
Allumag
Soft-on
EcoSys
temTM 3-w
44.5
temTM Pilo
N1 (1.8
EcoSys
4.LUTRO
ada: 1.84
USA / Can
110 W Max
- 0,40 A
ée:
Hz 0,92
Input | Entr
50 / 60
V
120 - 277
| Sortie:
Output
Class 2
4 A Max
24 V
Knob
chantier
stment
ation en
Field Adju
pour utilis
de Réglage
Bouton
Cu Al
Features
•Continuous, flicker-free dimming from 100% to 0.1% 1.
•Soft-on, Fade-to-BlackTM operation for EcoSystemTM
controls: fades smoothly between 0% and 0.1% when
turned on and off for an incandescent like experience. 2
•PWM dimming meets IEEE1789 over the entire
dimming range.
•UL® Listed for United States and Canada (cULus®).
•Field Adjustment Knob offers customer low-end light
output tuning for better fixture-to-fixture matching.
•Guaranteed dimming performance when used with
Lutron® controls:
– HomeWorks® QS, Energi Savr NodeTM units with
EcoSystemTM, GRAFIK Eye® QS with EcoSystemTM,
PowPak® dimming module with EcoSystemTM,
PowPak® wireless fixture control with EcoSystemTM,
and Quantum® systems, allowing for integration into
a planned or existing EcoSystemTM lighting control
solution.
–L
utron® 3-wire controls and interfaces.
•Protected from miswires of input power, up to 277 V~,
to EcoSystemTM control inputs...
•Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature.
•FCC Part 15 compliant for commercial applications at
120–277 V ~ and residential applications at 120 V ~.
1
2
.
G wire only ² seulement.
mm
- 12 AW
Use 20
0,50 - 2,5
un fil de
Utiliser
serrated
1/4 in (6,5
mm)
s
d-rolling,
, dentelée
x 3/8” threa roulage de filets
ws: 8-32
x 3/8”
Lid scre
ercle: 8-32
Vis du couv
p locations. humides.
for dam
lacements
Suitable
aux emp
Convient
removed.
ouvert.
ieur est
cover is
r plastic
ique intér
void if inne couvercle plast
si le
Warranty
or death.
annulée
us injury
Garantie
lt in serio
installing.
May resu lid, servicing or
es
hazard.
top
er de grav
: Shock
opening
. Peut caus
r before
WARNING
ct powe
ctrocutionl’alimentation du rieur,
onne
d'éle
er
Disc
: Dang onne. Couper couvercle supé
SEMENT
pers
erture de
AVERTIS le décès de la
l’ouv
à
éder
ou
lésions
t de proc de l’installation.
ur avan
disjoncte
à l’entretien
ou
tage
au mon
6
0 78427
166027
r 4RM5
LED Drive
2a
B2
5001645
,156
ets: 7,911
Pats | Brev
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
5.5 in (140 mm) W x 2.0 in (51 mm) H x 10.5 in (267 mm) L
•100% end-of-line performance tested at factory.
•RoHS compliant.
•Restores all settings after power failure.
•Barrier provided for Class 2 separation in the wiring
compartment.
•Redundant connections on line and control terminals
for easy daisy chain wiring.
•For more information please visit: www.lutron.com
Light output at 0.1% depends on installation and light engine efficacy.
Soft-on, Fade-to-BlackTM is not available for 3-wire controls.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
1
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 2 03.24.16
Specifications
Regulatory Approvals and Compliance
•Lutron® Quality Systems registered to ISO 9001.2008
•Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20
•Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
•FCC Part 15 compliant for commercial applications at
120 V~ to 277 V~ and residential applications at 120 V~
•Meets UL® 8750/CSA C22.2 No. 250.13-14, “Light Emitting
Diode (LED) Equipment For Use in Lighting Products”
•Class 2 output; meets UL® 1310/CSA C22.2 No. 223-M91
Performance
•Dimming Range: 100% to 0.1% 1
•LED lighting turns on to any dimmed level without
flashing to full brightness
•Operating Voltage: 120 V~ to 277 V~ at 50 / 60 Hz
•Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature
•For rated warranty, ambient temperature (ta) not to
exceed 40 °C (104 °F) (maximum rated temperature) 2, 3
•Patented thermal fold back protection
•Non-volatile memory restores all driver settings after
power failure
•Typical standby power consumption: 0.25 W at
120 V~ and 0.4 W at 277 V~
•Open-circuit protected output
•Short-circuit and overload-protected output
•Class 2 output designed to withstand hot swap
•Output: 24 V- constant voltage at high-end
•Output: 25 W to 96 W
•PWM dimming frequency: meets IEEE1789 at all
dim levels
•Power Factor: > 0.95 at maximum power
•Total Harmonic Distortion (THD): < 20% at
maximum power
Performance (continued)
•NEMA 410 – 2011 compliant
•Inrush Current Limiting Circuitry: decreases circuit
breaker tripping, switch arcing and relay failure
•Inrush Current: < 2 A
•Device turn-on time: < 100 ms from electronic off and,
< 500 ms from power off
•Meets all "Solid State Electrical Performance
Requirements" (Section 11) in Energy Star® for
Luminaires Version 2.0
•L3D0-96W24V-U driver is programmed by Lutron®
manufacturing and is NOT configurable by the Lutron®
QwikFigTM configuration system
Environmental
•Sound rated: Class A inaudible in 24 dBA ambient
•Relative Humidity: maximum 90% non-condensing
•Minimum Operating Ambient Temperature: ta = 0 °C (32 °F) 3
•Indoor use only
•Rated for dry and damp locations
•Meets NEC® requirements for installation in “other
space used for environmental air” 4
•Meets the Canadian National Building Code Plenum
Requirements for a concealed space used as a
plenum within a floor or roof assembly
•Maximum heat output of module: 46 BTU/hour
1
Light output at 0.1% depends on installation and light engine efficacy.
To maintain warranty, installer is responsible for ensuring that the driver ambient temperature does not exceed 40 ºC (104 ºF).
3 Where ta is the temperature of the air directly surrounding the driver.
4 Additional considerations may be required based on state and local codes and standards.
2
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
2
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 3 03.24.16
Specifications (continued)
Driver Wiring and Mounting
For best installation practices, please refer to
Application Note #591 at www.lutron.com
•Mount the driver in a position where it can be easily
located and accessed if service or troubleshooting is
necessary.
•Driver is grounded by terminal connection
•Terminal blocks on the driver accept solid or stranded
wire per terminal from 20 AWG to 12 AWG (0.50 mm2 to
2.5 mm2)
•Maximum wire length between the LED driver and the
start of the linear strip for different wire sizes is listed
below.
Wire Gauge
Maximum Lead Length
20 AWG (0.50 mm2)
18 AWG (0.75 mm2)
16 AWG (1.0 mm2)
14 AWG (1.5 mm2)
12 AWG (2.5 mm2)
10 AWG (4.0 mm2)*
15 ft (4.5 m)
25 ft (7.62 m)
40 ft (12.2 m)
60 ft (18.3 m)
100 ft (30.5 m)
150 ft (45.7 m)
* To use wire gauge larger or smaller than terminal blocks’ rated gauge of
20 AWG to 12 AWG (0.50 mm2 to 2.5 mm2), connect 1 ft (0.3 m) or less of
rated wire from terminal and connect with larger or smaller wire.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
3
LED
LED
Dimming
Driver
LEDDimming
DimmingDriver
Driver
Hi-lume®Hi-lumeT
Premier 0.1%
Constant
Voltage
Constant
Voltage
LED
Hi-lumeT
Constant
Voltage
LED Driver
Driver (L3D0)
Architectural
Architectural
Dimming
ArchitecturalDimming
Dimming
369883b
369883a
10.02.15
369883a433 03.24.16
10.02.15
Models
Models
Available
ModelsAvailable
Available
Input
Input
Input
Voltage
Voltage
Voltage
(V~)
(V~)
(V~)
Model
Model
Model
3-Wire
3-Wire or
or
EcoSystemT
EcoSystemT
EcoSystem
TM
Control
Control222
Control For
24
VFor24
24VVFor
Constant
Voltage
L3D0-96W24V-U
ConstantVoltage
Voltage L3D0-96W24V-U
L3D0-96W24V-U
Constant
LED
Loads
LEDLoads
Loads
LED
Input
Typical
Input
Input
Power
Power
Current
Current
Current Power
11
Factor
Factor
1
(A)
Factor
(mA)
(mA)
Typical
11
THD
THD
1
THD
(%)
(%)
(%)
Output
Output
Output
Output Output
Output
Power
Power
Voltage
Power Voltage
Voltage
(W)
(V-)
(W)
(V-)
(W)
(V-)
120
120
120
0.92
0.92
0.92
0.98
0.98
0.99
15
15
7.5
25
25 – 96
25––96
96
24.0
24.0
24
277
277
277
0.40
0.40
0.40
0.95
0.95
0.97
20
20
11
25
25––96
96
25 – 96
24.0
24.0
24
11 At maximum output power.
At maximum output power.
1 At maximum output power.
22 For wiring options, see Wiring section, pages 7.
For wiring options, see Wiring section, pages 7.
2 For wiring options, see Wiring section, pages 9-11.
95%
95%
95%
40%
30%
40%
30%
30%
90%
90%
90%
30%
30%
20%
20%
20%
THD
THD
THD
Efficiency@
@Pmax
Pmax
Efficiency
@
Pmax
Efficiency
THD
vs.
Output
THDTHD
vs. vs.
Output
Power
OutputPower
Power
Efficiency
vs.
Power
Efficiency
Output Power
Efficiency
vs.vs.Output
Output
Power
85%
85%
85%
10%
10%
10%
10%
10%
80%
80%
80%
75%
75%
75%
25
25
25
45
45
45
65
65
Output
Power
(W)
OutputPower
Power(W)
(W)
Output
120
VV~~V~
120
120
85
85
0%
0%
0%
96
96
96
Output Voltage
Voltage
(V)
Output
(V)
Output Voltage
(V)
Power Factor
Factor
Power
Power
Factor
0.95
0.95
0.95
0.90
0.90
0.90
0.85
0.85
0.85
45
65
85
45
65
85
45
65
85
Output
Power
(W)
Output
Power
(W)(W)
Output
Power
120
277
VV ~~V~
120 VV ~~120 V~
277277
45
65
85
45
65
85
45
65
85
Output
Power
(W)
Output
Power
Output
Power
(W)(W)
120
VV ~~V~
277
VV ~~
120
277V~
120
277
96
96
96
Output
Voltage
Output
Power
Output
Voltage
vs.
Output
Power
Output
Voltagevs.
vs. Output
Power
1.00
1.00
1.00
25
25
25
25
25
25
277
VV~V~
277
~
277
Power
Factor
vs.
Power
Power
Factor
vs.vs.Output
Output
Power
Power
Factor
Output Power
0.80
0.80
0.80
20%
20%
96
96
96
25.0
25.0
25.0
24.5
24.5
24.5
24.0
24.0
24.0
23.5
23.5
23.5
23.0
23.0
23.0
25
25
25
45
65
85
45
65
85
45
65
85
Output
Power
(W)
Output
Power
(W)(W)
Output
Power
120
VV ~~V~
277
VV ~~
120
277V~
120
277
96
96
96
NOTE: Specifications are subject to change without notice.
®
®®
Job
Job
Name:
JobName:
Name:
Job
Job
Number:
JobNumber:
Number:
S
SSP
PPEEEC
C
C
AT
O
N
SSU
U
B
M
TA
CIIIFFFIIIC
CAT
ATIIIO
ON
NS
UB
BM
MIIITTTTA
TALLL
Model
Model
Numbers:
ModelNumbers:
Numbers:
Page
Page
Page
4
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 5 03.24.16
Enclosure Dimensions
Measurements are shown as: in (mm)
5.5 (140)
2.0 (51)
lutron.co
m
Hi-lume
L3D0-96
Soft-on,
®
Premier
0.1%
W24V-U
Fade-to-Bla
EcoSystem
Allumage
TM
ck
3-wire Con TM
stant Volt
doux, fon
age LED
Driver
du au noi
r
Pilote 3-fil
tension con
USA / Can
stante pou
ada: 1.84
r DEL
4.LUTRO
N1 (1.844.5
Input | Ent
88.7661)
rée:
120 - 277
V
50 / 60 Hz
0,92 - 0,40
Output |
A 110 W
Sortie:
Max
24 V
4 A Max
Class 2
EcoSystem
TM
Field Adju
stment Kno
b
Bouton de
Réglage
pour utili
sation
Use 20 12
Utiliser un AWG wire only.
fil de 0,50
- 2,5 mm
² seu
en chantie
r
lement.
Cu Al
Lid screws:
1/4 in (6,5
8-32 x 3/8”
mm)
Vis du couv
thread-rollin
ercle: 8-32
g, serrated
x 3/8” roula
ge de filets
, dentelée
Suitable
s
for damp
loca
Convient
tions.
aux emp
lacemen
ts humides
.
Warranty
void if inne
r plastic cove
Garantie
annulée
r is removed
si le couv
.
ercle plas
tique intér
ieur est ouve
WARNIN
rt.
G:
Disconne Shock hazard. May
ct power
before open result in serious
AVERTIS
injur
ing top lid,
SEMENT
servicing y or death.
lésions ou
: Danger
or installing
d'éle
le
décè
.
ctroc
s de la pers
disjoncte
ution. Peu
ur
onne. Cou
t causer
de graves
au montageavant de procéder
per l’alim
entation
à l’ouvertur
ou à l’ent
du
retien de
e
l’installation.de couvercle supé
rieur,
0 78427
6
166027
Pats | Brev
ets: 7,91
1,156
10.5 (267)
Knockouts
•Sides
– 4 locations: 1/2 in or 21 mm trade size
•Top
– 2 locations: 1/2 in or 21 mm trade size
LED Drive
r 4RM5
B2
®
Job Name:
Job Number:
5001645
2a
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
5
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 6 03.24.16
Mounting
Options 1,2
Mounting Surface
1
2
Any other mounting configuration will require additional mechanical support. Improper installation may result in hazards to personnel or property.
Mount the driver in a position where it can be easily located and accessed if service or troubleshooting is necessary.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
6
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 7 03.24.16
Mounting Options (continued)
A PowPak® Wireless Fixture Control can be mounted on the driver using the driver's available knockouts.
Additional considerations may be required based on state and local codes and standards.
PowPak Dimming Module
Model RMJ-ECO32-DV-B
PowPak® Fixture Control 1,2
Model FCJ-ECO
Pico® Wireless Control
Model PJ2-_B__-G
lutron.com
Hi-lume Premier 0.1%
®
L3D0-96W24V-U
Soft-on, Fade-to-Black™
EcoSystem™ / 3-wire Constant Voltage LED Driver
Allumage doux, fondu au noir
EcoSystem™ pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
120 - 277 V~ 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Output | Sortie:
24 V- 4 A Max Class 2
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Use 20 - 12 AWG wire only.
Utiliser un fil 0,50 - 2,5 mm2 seulement.
Cu Al
1/4 in (6,5 mm)
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle : 8-32 x 3/8” roulage de filets, dentelées
Suitable for damp locations.
Convient aux emplacements humides.
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
WARNING: Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT : Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
LISTED
LED Driver 4RM5
Pats. | Brevets: 7,911,156
B2
50016452a
Hi-lume ® Premier 0.1% Constant Voltage Driver
Model L3D0-96W24V-U
1
The wireless fixture control will need to have its low-end level reprogrammed to dim to 0.1% output. For more detail on adjusting low-end light level of the
FCJ-ECO, refer to Application Note #556 at www.lutron.com
2 For Line/Hot (L/H) terminal on the driver, it is preferred to not use switched hot (red) wire from the control but the hot wire direct from power source.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
7
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 8 03.24.16
Barrier Installation and Driver Spacing Requirements
Measurements are shown as: in (mm)
1.2.
≥ 5.125 (130)
3.325 (86)
Barrier
Output
•Optional barrier can be placed either
between input and control terminal
(Option 1) or between control and output
terminal (Option 2).
•Maintain a minimum of 3.0 in (76 mm) between
any two Hi-lume® Premier 0.1% drivers.
Barrier
Control
Input
Output
Control
Input
≥ 3.0 (76)
≥ 3.0 (76)
Barrier
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
8
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 9 03.24.16
Wiring
L3D Models: 3-Wire Controls (third wire required for control signal)
Wiring Diagram
Lutron®
3-Wire
Dimmer/
Module/Panel
Line / Hot
To line
voltage
LED + 1
Switched Line / Hot (L) Dimmed Hot (DH) Neutral
Ground
Neutral
Neutral (N)
Hi-lume ®
Premier
0.1 % Constant
Voltage
LED Driver
LED
Light
Engine
LED – 1
Ground
1
For the maximum wire length between the LED driver and the start of the linear strip, see charts in the Driver Wiring and Mounting section.
Compatible Controls without Soft-on, Fade-to-BlackTM feature: Lutron® 3-Wire Controls
Guaranteed performance specifications with the controls listed in the chart below.
For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com
Model Number
120 V~
277 V~
NTF-10NTF-10-277NTF-103PNTF-103P-277NF-10NF-10-277NF-103PNF-103P-277SF-10PSF-12P-277SF-103PSF-12P-277-3DVF-103PDVF-103P-277DVSCF-103P- DVSCF-103P-277AYF-103PAYF-103P-277-
Product
Nova T*® dimmer
Nova® dimmer
Skylark® dimmer
Diva® dimmer
Ariadni® dimmer
MAF-6AMMSCF-6AM-
Maestro® dimmer
Maestro Wireless® dimmer
RadioRA ® 2 dimmer
HomeWorks® QS dimmer
MAF-6AM-277MSCF-6AM-277-
MRF2-F6AN-DV-
Low-end Trim
Setting
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1 – 6
1 – 6
1 – 14
1 – 14
1 – 6
1 – 14
—
—
21% 3
RRD-F6AN-DV-
1 – 6
1 – 14
HQRD-F6AN-DV-
1 – 6
1 – 14
Fluorescent 3-wire
LED 3-wire
21% 3
1 – 16
1 – 16
1 – 16
1 – 16
1 – 16
–
1 – 38
1 – 38
1 – 38
1 – 38
—
—
—
—
2-1
—
—
—
—
—
—
PHPM-3F-DV-
GP dimming panels
Load Type
Dual voltage
3-wire dimmer
PHPM-3F-120Interfaces 2
Drivers per Control 1
120 V~
277 V~
1 –16
1 – 19
1 – 8
1 – 14
1 – 16
1 – 19
1 – 8
1 – 14
1 – 8
1 – 14
1 – 8
1 – 14
1 – 8
1 – 14
1 – 8
1 – 14
1 – 8
1 – 14
BCI-0-10
Various
1
No derating required in multi-gang applications provided that the fixture-count does not exceed the quantity listed.
Please refer to interface specification sheet for compatible system list.
3 Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level
could be used to avoid dead travel but might result in >0.1% dim level.
2
Note: For information about legacy products use in existing control application with this driver, contact LEDs@lutron.com
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
9
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 10 03.24.16
Wiring (continued)
L3D Models: EcoSystemTM Digital Controls
E1
To EcoSystemTM Digital Link
E2
LED+ 1
Line / Hot (L) Hi-lume ®
Premier
0.1 % Constant
Voltage
LED Driver
To line
voltage
Neutral (N)
LED
Light
Engine
LED– 1
Ground
1
For the maximum wire length between the LED driver and the start of the linear strip, see charts in the Driver Wiring and Mounting section.
Compatible Controls: Lutron® EcoSystemTM Digital Controls
Guaranteed performance specifications with the controls listed in the chart below.
For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 or LEDs@lutron.com
Product
PowPak® Dimming Module with EcoSystemTM
Model Number
120 V~
277 V~
RMJ-ECO32-DV-B
URMJ-ECO32-DVB
Recommended
System Version
Drivers per Control
5.9 or later
32 per EcoSystemTM link
FCJ-ECO 2
Later than 1.25
3 per EcoSystemTM link
QSN-1ECO-S, QSN-2ECO-S
QSN-2ECO-PS120
UQSN-1ECO-S, UQSN-2ECO-S
9.027 or later
64 per EcoSystemTM link
PowPak® Wireless Fixture Control with EcoSystemTM 1
Energi Savr Node TM unit with EcoSystemTM
GRAFIK Eye ® QS unit with EcoSystemTM
QSGRJ-_E
QSGR-_E
—
9.009 or later
64 per EcoSystemTM link
Quantum® Light Management Hub
QP2-_P_C
—
3.2 or later 3
64 per EcoSystemTM link
HomeWorks® QS with EcoSystemTM
LQSE-2ECO-D
QSGRJ-_E
QSGR-_E
—
10 or later
64 per EcoSystemTM link
1
All devices connected to one FCJ-ECO will be controlled together. Devices will dim to the same level as the result of a control command.
The wireless fixture control will need to have its low-end level reprogrammed to dim to 0.1% output. For more detail on adjusting low-end light level of the
FCJ-ECO, refer to Application Note #556 at www.lutron.com
2 For Line/Hot (L/H) terminal on the driver, it is preferred to not use switched hot (red) wire from the control but the hot wire direct from power source.
3 Version 3.1 (or later) is required to dim lower than 1%.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
10
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 11 03.24.16
Wiring (continued)
Continuous LED Light Run
In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult
load manufacturer best practices for any additional consideration in load installation.
LED + Hi-lume ® Premier
0.1 % Constant
Voltage LED Driver
LED
Light
Engines
LED – When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as
possible for best performance.
LED + LED – Hi-lume ® Premier
0.1 % Constant
Voltage LED Driver
LED + LED – LED + LED – ®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
LED
Light
Engine
LED
Light
Engine
LED
Light
Engine
Page
11
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 12 03.24.16
Field Adjustment Knob
The Field Adjustment Knob is located on the side of the Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
enclosure. This feature enables the customer to tune the lowest light output achieved during normal operation. An
example of this scenario is shown in the image below. Adjusting the Field Adjustment Knob of the lower light
output driver minimizes the light output difference and sets the low-end light level at 0.1%.
Figure 1: Cove Lighting with Mismatched Light Output at Low-End Due to Installation Variability
25 W Load
0.1% dim level
Steps:
1. Set the control to low-end and turn all knobs fully
counter-clockwise
2. Identify the driver with the lowest light output
3. Turn the knob clockwise until the light output
matches the brightest driver
%
0.1
Premier
Hi-lume24V-U
lutron.com
®
6W
L3D0-9
Allumag
EcoSystem
TM
USA / Cana
tensi
61)
4.588.76
Pilote 3-fil
N1 (1.84
4.LUTRO
da: 1.84
Input | Entré
V
120 - 277
Outp
24 V
r
lack TM Voltage LED Drive
Fade-to-B
tant
e Cons
TM 3-wir
DEL
noir
fondu au on constante pour
e doux,
Soft-on,
EcoSystem
e:
50 / 60
- 0,40
Hz 0,92
A
96 W Load
< 0.1% dim level
110 W Max
e:
ut | Sorti
Class 2
4 A Max
tier
Knob
en chan
stment
utilisation
Field Adju
age pour
de Régl
Bouton
Cu Al
ment.
wire only.
mm² seule
- 12 AWG
Use 20
0,50 - 2,5
un fil de
ted
Utiliser
ing, serra
1/4 in (6,5
166027
LED Driver
4RM5
B2
Hi-lume
r 0.1%
Premie
®
6W
L3D0-9
r
lack TM Voltage LED Drive
Fade-to-B
tant
e Cons
TM 3-wir
DEL
noir
fondu au on constante pour
e doux,
Soft-on,
EcoSystem
Allumag
®EcoSystem
TM
USA / Cana
tensi
61)
4.588.76
Pilote 3-fil
N1 (1.84
4.LUTRO
da: 1.84
-U
6W24V
L3D0-9
%
0.1
Premier
Hi-lume24V-U
lutron.com
Input | Entré
V
120 - 277
e:
50 / 60
- 0,40
Hz 0,92
A
110 W Max
Driver
TM
D
o-Black ant Voltage LE
, Fade-t
st
Soft-on mTM 3-wire Con
L
noir
te
ys
pour DE
au
S
e
u
co
nt
E
fond
nsta
e doux, 3-fil tension co
.7661)
Allumag
Outp
24 V
e:
ut | Sorti
Class 2
4 A Max
tier
Knob
en chan
stment
utilisation
Field Adju
age pour
de Régl
Bouton
Cu Al
mm)
ment.
wire only.
mm² seule
- 12 AWG
Use 20
0,50 - 2,5
un fil de
ted
Utiliser
ing, serra
1/4 in (6,5
mm)
ilote
.844.588
temTM P
ON1 (1
EcoSys
4.LUTR
ada: 1.84
an
C
/
US A
0 W Ma
40 A 11
ntrée:
0,92 - 0,
Input | E
/ 60 Hz
50
7V
120 - 27
| Sortie:
Output
Class 2
4 A Max
24 V
t Knob
an
ustmen
n en ch
utilisatio
Field Adj
ge pour
de Régla
n
to
ou
B
dentelées
d-roll
x 3/8” threa roulage de filets,
s: 8-32
x 3/8”
Lid screw
rcle: 8-32
Vis du couve
locations.
es.
for damp cements humid
Suitable
aux empla
Convient
t.
ved.
is remo
est ouver
intérieur
plastic cover
plastique
if inner
rcle
void
.
si le couve
Warranty
or death
annulée
s injury
in seriou
Garantie
installing.
May resultlid, servicing or
hazard.
graves
top
: Shock
opening
causer de
WARNING power before
du
ion. Peut
entation
d'électrocut
ieur,
Disconnect
: Danger nne. Couper l’alim
rcle supér
EMENT
de couve
perso
AVERTISSle décès de la der à l’ouverture.
ou
s
procé
llation
lésion
avant de
de l’insta
l’entretien
disjoncteur
ge ou à
au monta
0 784276
om
lutron.c
dentelées
d-roll
x 3/8” threa roulage de filets,
s: 8-32
x 3/8”
Lid screw
rcle: 8-32
Vis du couve
locations.
es.
for damp cements humid
Suitable
aux empla
Convient
t.
ved.
is remo
est ouver
intérieur
plastic cover
plastique
if inner
rcle
void
.
si le couve
Warranty
or death
annulée
s injury
in seriou
Garantie
installing.
May resultlid, servicing or
hazard.
graves
top
: Shock
opening
causer de
WARNING power before
du
ion. Peut
entation
d'électrocut
ieur,
Disconnect
: Danger nne. Couper l’alim
rcle supér
EMENT
de couve
perso
AVERTISSle décès de la der à l’ouverture.
ou
s
procé
llation
lésion
avant de
de l’insta
l’entretien
disjoncteur
ge ou à
au monta
50016452a
0 784276
,156
ts: 7,911
Pats | Breve
LED Driver
166027
4RM5
B2
50016452a
,156
ts: 7,911
Pats | Breve
ly.
t.
G wire on m² seulemen
m
- 12 AW
50 - 2,5
Use 20
fil de 0,
un
er
is
d
te
Util
g, serra
1/4
elées
read-rollin de filets, dent
x 3/8” th
age
ws: 8-32
3/8” roul
Lid scre
: 8-32 x
cle
er
uv
Vis du co
ns.
.
p locatio
humides
for dam
ements
Suitable
x emplac
au
nt
ie
Conv
r
moved.
re
est ouve
ver is
astic co astique intérieur
inner pl
pl
y void if
couvercle
le
si
Warrant
o
e
injury
annulé
serious
Garantie
result in rvicing or ins
rd. May
, se
ock haza opening top lid
NG: Sh
ut cause
Pe
WARNI ct power before
n.
rocutio
tation
l’alimen
er d'élect
Disconne
T : Dang rsonne. Couper couvercle
de
pe
SSEMEN
AVERTI le décès de la er à l’ouverture
éd
n.
ou
oc
tio
ns
lésio
t de pr n de l’installa
ur avan
disjoncte ge ou à l’entretie
ta
au mon
Figure 2: Cove Lighting After the Use of the Field Adjustment Knob Eliminates Mismatch without Costly Re-wiring
25 W Load
0.1% dim level
96 W Load
0.1% dim level
76
0 7842
M5
iver 4R
LED Dr
166027
B2
911,156
evets: 7,
Pats | Br
The Field Adjustment Knob cannot fix light level mismatch among loads on the same driver. For example, two
homeruns of different wattage. For increasing the minimum light output of all the drivers in a space, please use
the control's low-end trim feature. Using the Field Adjustment Knob for this purpose will degrade On / Off transition
performance.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
12
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 13 03.24.16
EcoSystemTM Wiring Diagrams
EcoSystemTM Digital Link Overview
•The EcoSystemTM Digital Link wiring (E1 and E2)
connects the digital ballasts and drivers together to
form a lighting control system.
•Sensors do not connect directly to drivers. Sensors
are integrated through the EcoSystemTM controller.
•E1 and E2 (EcoSystemTM Digital Link wires) are
polarity‑insensitive and can be wired in any topology.
•Power is supplied to the EcoSystemTM Digital Link from
the control system.
EcoSystemTM Digital Link Wiring
•EcoSystemTM Digital Link terminals accept 20 AWG
to 12 AWG (0.50 mm2 to 2.5 mm2) solid or stranded
copper wire per terminal.
•Make sure that the supply breaker to the drivers and
EcoSystemTM Digital Link Supply is OFF when wiring.
•E1 and E2 terminals of the drivers can be daisy
chained as shown to the right.
•Using two different colors for E1 and E2 will reduce
confusion when wiring several drivers together.
•The EcoSystemTM Link may be wired Class 1 or
Class 2 (See Lutron Application Note #142 at
www.lutron.com for more details). Consult applicable
electrical codes for proper wiring practices. Ensure
that the barrier placement is consistent with this wiring
choice.
•For emergency wiring, please refer to Lutron®
Application Note #106.
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
E2
E1
Notes
•The EcoSystemTM Digital Link Supply does not have
to be located at the end of the Digital Link.
•EcoSystemTM Digital Link length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Gauge
12 AWG
14 AWG
16 AWG
18 AWG
20 AWG
Digital Link Length (max)
2200 ft
1400 ft
900 ft
550 ft
352 ft
Wire Size
2.5 mm2
1.5 mm2
1.0 mm2
0.75 mm2
0.50 mm2
Digital Link Length (max)
828 m
517 m
310 m
207 m
155 m
Page
13
LED Dimming Driver
Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
Architectural Dimming
369883b 14 03.24.16
Service
Ballast / Driver Warranty
For warranty information, please visit
http://www.lutron.com/
TechnicalDocumentLibrary/3601281_ENG_Web.pdf
Replacement Parts
When ordering Lutron® replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
For further information, please visit us at
www.lutron.com or contact our LED Control Center of
Excellence at 1.877.346.5338 or LEDs@lutron.com
®
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
14