MUSIQC Packaging version 2.0 approved 1/25/2011 Author: Daniel Stick [SNL] Review committee: Matt Blain [SNL] Ray Haltli [SNL] Curtis Volin [GTRI] Andrew Manning [UMd] Boris Blinov [UW] Emily Mount [Duke] True Merrill [GT] MUSIQC Package Standard | version 2.0 Approved 1/25/2011 1 /11 100 Pin CPGA • There are two package part #’s, with identical routing and layout. • 8180BA (SSM P/N CPG10018) • 8180AB (SSM P/N CPG10034) – Note: in some cases, the 8180BA package might not have the extra registration pin present in the 8180AB package. • The packages have an extra registration pin on the pad 1 corner, so add an extra hole in the socket to handle this pin. Ideally, make the socket symmetric by adding four holes to allow any orientation of the package. The extra pin can be cut if necessary to fit with existing sockets. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 2 /11 Trap height and shielding • Height h of the top of trap chip above the top of the package: • 0.5 mm < h < 1.5 mm h • For charge shielding, GTRI will include a screen which attaches to the package. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 3 /11 MUSIQC 48 pin wiring standard • • • • 48 control pins RF/RF ground pair 2 dedicated control grounds RF & control grounds connected on package base. Seal ring is also grounded. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 4 /11 MUSIQC 48 pin wiring standard MUSIQC standard (view of package top) 100 1 75 25 51 26 rf gnd 76 Control ground Control 50 Not used. The trap may short these pins to ground or to control pins. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 5 /11 MUSIQC 48 pin wiring standard MUSIQC standard (view of package bottom) rf gnd rf Control ground Control Not used. The trap may short these pins to ground or to control pins. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 6 /11 MUSIQC 48 pin wiring standard MUSIQC standard 48 pin list rf gnd rf Control ground Control Not used. The trap may short these pins to ground or to a control pins. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 7 /11 MUSIQC 96 pin wiring standard • • • • 96 control pins RF/RF ground pair 2 dedicated control grounds RF & control grounds connected on package base. Seal ring is also grounded. MUSIQC Package Standard | version 2.0 Approved 1/25/2011 8 /11 MUSIQC 96 pin wiring standard MUSIQC standard (view of package top) 100 76 1 75 25 51 26 rf gnd rf 50 Control ground Control Optional control (will be used as a last resort) MUSIQC Package Standard | version 2.0 Approved 1/25/2011 9 /11 MUSIQC 96 pin wiring standard MUSIQC standard (view of package bottom) rf gnd rf Control ground Control Optional control (will be used as a last resort) MUSIQC Package Standard | version 2.0 Approved 1/25/2011 10 /11 MUSIQC 96 pin wiring standard MUSIQC standard 96 pin list rf gnd rf Control ground Control Optional control (will be used as a last resort) MUSIQC Package Standard | version 2.0 Approved 1/25/2011 11 /11