WALL MOUNTING
ENCLOSURES
14
MAS
mild steel
18
IP 66; NEMA 4, 12, 13
IK 10
H: 200-1200
W: 200-800
D: 155-400
MAD
mild steel
22
IP 55; NEMA 12,13
IK 10
H: 600-1400
W: 800-1200
D: 300
MAP
mild steel
24
IP 66; NEMA 4, 12, 13
IK 10
H: 300
W: 600-1200
D: 300
ASR
stainless steel
28
IP 66; NEMA 4X,12,13
IK 10
H: 180-1400
W: 200-800
D: 150-400
ADR
stainless steel
Accessories
30
IP 55; NEMA 12,13
IK 10
H: 1000
W: 1000-1200
D: 300
AFS
stainless steel
IP 66; NEMA 4X,12,13
IK 10
H: 300-1400
W: 200-800
D: 155-400
32
Mounting plates
34
Fixation
36
Doors
37
Locks
40
Rainhoods
42
Plinths
43
Cable management
44
Modular system
50
General Accessories
286
15
Eldon MultiMount® mild steel
wall mounting enclosures
Technical Information
Sturdy cruciform body folded from a cold pressed
sheet steel plate, 1.2 / 1.4 / 1.5mm thickness.
The enclosure edge is folded in the shape of a
channel to avoid water stagnating on the seal.
The door is made out of 1.2 / 1.4 / 1.8mm steel
and is fitted with galvanized rails in the door
above 500mm, procuring cable tracks, profiles,
etc., a cable entry plate and a M8 threaded stud
for earthing to base, door and mounting plate.
Cable entry is reached by a maximum gland
opening, which is placed in the most far back
position of the enclosure frame. To allow for air
circulation around the rear and for wall fixing,
four 20.4mm diameter x 2mm deep depressions
are pressed out with an 8.5mm diameter hole.
16
two or three hinges and its angle of opening is at
least 130°. The hinges are not visible in closed
position and are fitted with a captive hinge pin.
The direction of turn of the door is left-right and
is reversible. The single doors are closed by one,
two or three point locking system, the double
doors by means of three point espagnolette
system. Double grips on the lock housing makes
easy opening of the door possible. The door also
has a seamless polyurethane gasket.
of the equipment on the mounting plate and
holes in top and bottom have been applied for
cable fixing.
To comply with EMC guidelines, the mounting
plate is manufactured from galvanized steel
plate 2-2.5mm thick. This plate provides an
equipotential mass connection between all
devices on the enclosure.
The enclosure offers maximum protection to
the user and equipment by a protection degree
IP 66 - IK 10 according to lEC 60529 and
IEC 50102 (IP 55 - IK 10 for enclosures with
double door and enclosures with glazed door).
When using an inner door, modular framework
or 19” swing frame, protection degree IP20 is
guaranteed within the enclosure. Complying
with NEMA 4, 12 and 13.
Standard closing with a double-bit 3mm insert.
The door opens within the outer dimensions of
the enclosure body allowing enclosures to be
mounted directly next to each other without
door interference.
AII parts are pre-treated with iron phosphate,
demineralised and protected with a epoxypolyester powder paint RAL 7035 with structured
finish.
The mounting plate can be set up and wired
outside the enclosure. It is placed subsequently
in the enclosure:
• either against the rear wall of the enclosure
• or using a mounting kit, which is adjustable
in depth.
The enclosure consists of two parts: the body
and the door. The door is secured by means of
Furthermore the mounting plate is equipped with
side markings every 10mm for easy mounting
The enclosure is secured to the wall using: bolts,
directly through the rear wall and protected inside
with plastic washers, or wall mounting brackets
at the rear screwed from the enclosure. In both
cases the lP / NEMA degrees are guaranteed.
The enclosures have the UL approval, as per UL
standard 508A and also comply with the CSA
certification mark, as per C22.2 no. 94.
MultiMount® mild steel
wall mounting enclosures
 Typical applications:
heating, ventilation,
air conditioning OEM’s,
small control systems,
distribution solutions.
 One-piece body for optimum
rigidity and maximum IP.
 Multi-purpose:
mounting plate,
19 inch profiles,
swing frame,
modular system.
 Easy-to-work-with.
 Large useful mounting space.
 Easy equipment positioning.
 Factory customisation.
 Approvals and certifications.
17
CATALOGUE 2011.book Page 18 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
MAS
Mild steel, single door enclosure
The MultiMount range of mild steel IP 66 wall mounting enclosures has been designed with the user in mind. Practical,
efficient and with a wide range of standard sizes and accessories available from stock, the MultiMount range offers a solution
to virtually every application, or can be easily customised to suit specific requirements.
Technical data
Material: Body: 1.2mm mild steel / 1.4mm MAS0606021R5 and
above / 1.5mm MAS1008026R5 and above, and 400mm depth
enclosures. Gland plate: 1.4mm mild steel. Door: 1.2mm mild
steel / 1.4mm MAS0606021R5 and above / 1.8mm
MAS1006026R5 and above. Mounting plate: 2mm galvanized
steel.
Body: Folded and seam welded. Four 8.5mm diameter holes for
wall fixing, pressed out in 20.4mm diameter x 2mm depressions
to allow air circulation around the rear part of the enclosure.
Door: Surface mounted with 130° opening. Concealed
removable hinges with captive pin. Hinges can be mounted to
allow left or right hand opening. From height 300mm and above
there are studs to mount door profiles MMDP, and from height
600 and above the profiles are included as standard. Sealing is
ensured by an injected one piece polyurethane gasket.
Lock: Customised lock with double grip for easy opening of the
door. Double-bit 3mm insert and 90° movement. 1000mm high
enclosures and above have espagnolette three point locking.
Other inserts are available as an accessory.
18
Wall Mounting
IP 66/NEMA 4, 12, 13
IK 10
Mounting plate: The mounting plate is marked vertically at
10mm intervals for easy horizontal positioning of equipment. On
the top and bottom there are holes to facilitate cable fixing. Fixed
onto M8 press welded studs to the rear of the enclosure. All sides
from 800mm and above are strengthened by folded edges. By
using the AMG accessory the mounting plate position can be
adjusted to any depth.
Gland Plate Opening: Situated at the far rear of the enclosure to
make cabling onto the mounting plate easier.
Protection: Complies with IP 66, and NEMA 4, 12 and 13. For
outdoor installation the use of rain hood ARF is recommended,
and the corrosion resistance must be taken into consideration.
Finish: RAL 7035 structure powder coating.
Delivery: Enclosure with door, and two door mounting profiles
from size MAS0604015R5 and above. Gland plate(s) with
gasket(s), plastic double-bit 3mm key, and mounting accessories.
Earthing facilities.
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 19 Thursday, July 28, 2011 10:55 AM
Wall Mounting Enclosures
MAS, IP 66/NEMA 4, 12, 13 IK 10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
d
200
250
200
200
250
250
155
155
155
155
210
155
210
155
155
210
210
210
210
210
155
210
260
300
210
300
155
210
260
300
155
210
260
300
210
300
400
300
210
260
300
210
260
300
400
210
300
400
260
300
260
300
400
300
300
400
170
220
220
270
270
270
270
320
370
370
370
370
370
470
470
470
470
470
470
470
570
570
570
570
570
570
570
570
570
570
570
570
670
670
770
770
770
770
770
770
770
770
970
970
970
970
970
1170
1170
1170
150
150
200
200
200
250
250
200
250
250
350
450
550
250
350
350
350
350
450
450
350
350
350
350
450
450
450
450
550
550
550
750
450
450
350
550
550
550
550
750
750
750
550
550
750
750
750
550
750
750
137
137
137
137
192
137
192
137
137
192
192
192
192
192
137
192
242
282
192
282
137
192
242
282
137
192
242
282
192
282
382
282
192
242
282
192
242
282
382
192
282
382
242
282
242
282
382
282
282
382
300
300
350
400
500
250
300
400
500
600
300
400
500
600
400
500
600
700
800
800
500
400
600
800
1000
600
800
1200
600
800
Gland plate openings
Size
Type
Openings
N° of locks
110x56
110x56
110x56
110x56
110x56
210x56
210x96
110x56
210x56
210x96
310x96
410x96
510x96
210x96
310x56
310x96
310x96
310x96
410x96
410x96
310x56
310x96
310x96
310x96
410x56
410x96
410x96
410x96
510x96
510x96
510x96
310x96
410x96
410x96
310x96
510x96
510x96
510x96
510x96
310x96
310x96
310x96
510x96
510x96
310x96
310x96
310x96
510x96
310x96
310x96
0S
0S
0S
0S
0S
1S
1
0S
1S
1
2
3
4
1
2S
2
2
2
3
3
2S
2
2
2
3S
3
3
3
4
4
4
2
3
3
2
4
4
4
4
2
2
2
4
4
2
2
2
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
1
1
2
2
2
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1*
1*
1*
1*
1*
1*
1*
1*
Part No.
MAS0202015R5
MAS0252015R5
MAS0252515R5
MAS0302515R5
MAS0302521R5
MAS0303015R5
MAS0303021R5
MAS0352515R5
MAS0403015R5
MAS0403021R5
MAS0404021R5
MAS0405021R5
MAS0406021R5
MAS0503021R5
MAS0504015R5
MAS0504021R5
MAS0504026R5
MAS0504030R5
MAS0505021R5
MAS0505030R5
MAS0604015R5
MAS0604021R5
MAS0604026R5
MAS0604030R5
MAS0605015R5
MAS0605021R5
MAS0605026R5
MAS0605030R5
MAS0606021R5
MAS0606030R5
MAS0606040R5
MAS0608030R5
MAS0705021R5
MAS0705026R5
MAS0804030R5
MAS0806021R5
MAS0806026R5
MAS0806030R5
MAS0806040R5
MAS0808021R5
MAS0808030R5
MAS0808040R5
MAS1006026R5
MAS1006030R5
MAS1008026R5
MAS1008030R5
MAS1008040R5
MAS1206030R5
MAS1208030R5
MAS1208040R5
* 3 point espagnolette locking.
Product specifications, CAD drawings and information available on the website
Wall Mounting
19
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 20 Thursday, July 28, 2011 10:55 AM
Wall Mounting Enclosures
MAS, IP 66/NEMA 4, 12, 13 IK 10
Without mounting plate
Enclosure dimension
H
W
D
200
250
200
200
250
250
155
155
155
155
210
155
210
155
155
210
210
210
210
210
155
210
260
300
210
300
155
210
260
300
155
210
260
300
210
300
400
300
210
260
300
210
260
300
400
210
300
400
260
300
260
300
400
300
300
400
300
300
350
400
500
250
300
400
500
600
300
400
500
600
400
500
600
700
800
800
500
400
600
800
1000
600
800
1200
600
800
Gland plate openings
Size
Type
Openings
N° of locks
110x56
110x56
110x56
110x56
110x56
210x56
210x96
110x56
210x56
210x96
310x96
410x96
510x96
210x96
310x56
310x96
310x96
310x96
410x96
410x96
310x56
310x96
310x96
310x96
410x56
410x96
410x96
410x96
510x96
510x96
510x96
310x96
410x96
410x96
310x96
510x96
510x96
510x96
510x96
310x96
310x96
310x96
510x96
510x96
310x96
310x96
310x96
510x96
310x96
310x96
0S
0S
0S
0S
0S
1S
1
0S
1S
1
2
3
4
1
2S
2
2
2
3
3
2S
2
2
2
3S
3
3
3
4
4
4
2
3
3
2
4
4
4
4
2
2
2
4
4
2
2
2
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
1
1
2
2
2
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1*
1*
1*
1*
1*
1*
1*
1*
Part No.
MAS0202015PER5
MAS0252015PER5
MAS0252515PER5
MAS0302515PER5
MAS0302521PER5
MAS0303015PER5
MAS0303021PER5
MAS0352515PER5
MAS0403015PER5
MAS0403021PER5
MAS0404021PER5
MAS0405021PER5
MAS0406021PER5
MAS0503021PER5
MAS0504015PER5
MAS0504021PER5
MAS0504026PER5
MAS0504030PER5
MAS0505021PER5
MAS0505030PER5
MAS0604015PER5
MAS0604021PER5
MAS0604026PER5
MAS0604030PER5
MAS0605015PER5
MAS0605021PER5
MAS0605026PER5
MAS0605030PER5
MAS0606021PER5
MAS0606030PER5
MAS0606040PER5
MAS0608030PER5
MAS0705021PER5
MAS0705026PER5
MAS0804030PER5
MAS0806021PER5
MAS0806026PER5
MAS0806030PER5
MAS0806040PER5
MAS0808021PER5
MAS0808030PER5
MAS0808040PER5
MAS1006026PER5
MAS1006030PER5
MAS1008026PER5
MAS1008030PER5
MAS1008040PER5
MAS1206030PER5
MAS1208030PER5
MAS1208040PER5
* 3 point espagnolette locking.
20
Wall Mounting
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 21 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounting
21
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 22 Thursday, July 28, 2011 12:50 PM
Wall Mounting Enclosures
MAD
Mild steel, double door enclosure
The MultiMount range of mild steel wall mounting enclosures is also available in double door versions, and complies with
IP 55. There are 5 sizes available and a range of accessories. The standard finish is RAL 7035, although other colours and sizes
are available on request.
Technical data
Material: Body: 1.4mm mild steel MAD0608030R5 / 1.5mm
MAD0801230R5 and above. Gland plate: 1.4mm mild steel.
Doors: 1.4mm mild steel / 1.8mm MAD0801230R5 and above.
Mounting plate: 2mm galvanized steel / 2.5mm MAD1001030R5
and above.
Body: Folded and seam welded. Four 8.5mm diameter holes for
wall fixing, pressed out in 20.4mm diameter x 2mm depressions
to allow air circulation around the rear part of the enclosure.
Door: Surface mounted with 130° opening. Concealed
removable hinges with captive pin. Two removable mounting
profiles in the right hand door. Sealing is ensured by an extruded
one piece polyurethane gasket.
Lock: Customised lock with double grip for easy opening of the
door, double-bit 3mm insert and 90° movement. Espagnolette
three point locking. Other inserts are available as an accessory.
Mounting plate: The mounting plate is marked vertically at
10mm intervals for easy horizontal positioning of equipment.
22
Wall Mounting
IP 55 / NEMA 12,13
IK 10
On the top and bottom there are holes to facilitate cable fixing.
Fixed onto M8 press welded studs to the rear of the enclosure. All
sides from 800mm and above are strengthened by folded edges.
By using the AMG accessory the mounting plate position can be
adjusted to any depth.
Gland Plate Opening: Situated at the far rear of the enclosure to
make cabling onto the mounting plate easier.
Protection: Complies with IP 55, and NEMA 12, 13. For outdoor
installation the use of rain hood ARF is recommended, and the
corrosion resistance must be taken in consideration.
Finish: RAL 7035 structure powder coating.
Delivery: Enclosure with doors, and two door mounting profiles
on the right door. Gland plate(s) with gasket(s), plastic DIN 3mm
key, and mounting accessories. Earthing facilities.
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 23 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
MAD, IP 55 / NEMA 12,13 IK 10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
d
600
800
1000
1200
1400
800
1200
1000
1000
1000
300
300
300
300
300
570
770
970
1170
1370
750
1150
950
950
950
282
282
282
282
282
Gland plate openings
Size
Type
Openings
N° of locks
310x96
510x96
410x96
410x96
410x96
2
4
3
3
3
2
2
2
2
2
1*
1*
1*
1*
1*
Part No.
MAD0608030R5
MAD0801230R5
MAD1001030R5
MAD1201030R5
MAD1401030R5
Without mounting plate
Enclosure dimension
H
W
D
600
800
1000
1200
1400
800
1200
1000
1000
1000
300
300
300
300
300
Gland plate openings
Size
Type
Openings
N° of locks
310x96
510x96
410x96
410x96
410x96
2
4
3
3
3
2
2
2
2
2
1*
1*
1*
1*
1*
Part No.
MAD0608030PER5
MAD0801230PER5
MAD1001030PER5
MAD1201030PER5
MAD1401030PER5
* 3 point espagnolette locking.
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounting
23
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 24 Tuesday, August 2, 2011 4:21 PM
Wall Mounting Enclosures
MAP
Mild steel panel
The MAP is an incredibly versatile enclosure, for use in either stand alone applications, or in conjunction with MAS/MAD as a
cableway.
Technical data
Material: Body: 1.4mm mild steel. Panel: 1.4mm mild steel.
Mounting plate: 2mm galvanized steel.
Body: Folded and seam welded. Four 8.5mm diameter holes for
wall fixing pressed out in 20.4mm diameter x 2mm depressions to
allow air circulation around the rear part of the enclosure.
Front panel: Surface mounted with 90° opening. Concealed
removable hinges with captive pin. Hinges can be mounted to
allow top or bottom opening. Mechanical door stop keeps panel
open. One removable mounting profile on the hinge side. Sealing
is ensured by an extruded one piece polyurethane gasket.
Lock: Customised lock with double grip for easy opening of the
panel. double-bit 3mm insert and 90° movement. Other inserts
are available as an accessory.
Mounting plate: The mounting plate is marked vertically at
10mm intervals for easy horizontal positioning of equipment. On
the top and bottom there are holes to facilitate cable fixing. Fixed
onto M8 press welded studs to the rear of the enclosure.
24
Wall Mounting
IP 66 / NEMA 4, 12, 13
IK 10
All sides from 800mm and above are strengthened by folded
edges. By using the AMG accessory the mounting plate position
can be adjusted to any depth.
Gland Plate Opening: In top and bottom. Situated at the far rear
of the enclosure to make cabling onto the mounting plate easier.
Gland plates (AF) and gaskets (AG) are not included. The gland
plates used are those delivered with the MAS or MAD enclosures.
Protection: Mounted stand alone complies with IP 66, and
NEMA 4, 12 and 13, as long as you mount the gland plate(s) and
gasket(s), supplied as an accessory. Combined with MAS or
MAD complies with IP 55 and NEMA 12. For outdoor installation
the use of rain hood ARF is recommended, and the corrosion
resistance must be taken in consideration.
Finish: RAL 7035 structure powder coating.
Delivery: Enclosure with panel, and one panel mounting profile.
Plastic double-bit 3mm key, and mounting accessories. Earthing
facilities.
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 25 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
MAP, IP 66 / NEMA 4, 12, 13 IK 10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
d
300
600
800
1000
1200
300
300
300
300
270
270
270
270
550
750
950
1150
282
282
282
282
Gland plate openings
Size
Type
Openings
510x96
310x96
410x96
510x96
4
2
3
4
1+1
2+2
2+2
2+2
N° of
locks
2
2
2
2
Part No.
MAP0306030R5
MAP0308030R5
MAP0310030R5
MAP0312030R5
Without mounting plate
Enclosure dimension
H
W
D
300
600
800
1000
1200
300
300
300
300
Gland plate openings
Size
Type
510x96
310x96
410x96
510x96
4
2
3
4
Openings N° of locks
1+1
2+2
2+2
2+2
2
2
2
2
Part No.
MAP0306030PER5
MAP0308030PER5
MAP0310030PER5
MAP0312030PER5
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounting
25
Eldon MultiMount®
stainless steel
wall mounting enclosures
Technical Information
Sturdy cruciform body folded from cold pressed
1/1.5mm pre-grained AISI 304 / AISI 316L
stainless steel. The enclosure edge is folded in
the shape of a channel to avoid water stagnating
on the seal.
The door is made out 1.5/2mm pre-grained AISI
304 / AISI 316L stainless steel with M6 studs
allowing mounting of MMDP profiles (accessory)
for easy installation of cable tracks, profiles, etc.
Body and door are provided with M8 threaded
studs for earthing connection.
The enclosure has external a pre-grained finish,
which gives the product an aesthetically and
highly professional appearance.
Finish of the outer door and body 240s pre
grained (average 0.5 microns), which makes it
highly suitable for the food industries (HACCP).
26
The enclosure consists of two parts: the base
and the door. The door is secured by means of
two or three stainless steel hinges and its angle
of opening is at least 130°. The hinges are not
visible in closed position and are fitted with a
captive hinge pin. The opening direction of the
door is left-right and is reversible.
The single doors are closed by one, two or three
point locking system, the double doors by means
of three point espagnolette system. The door also
has a seamless polyurethane gasket.
The chrome plated Eldon customized 3mm
double-bit lock with 90-degree movement can
be interchanged with other inserts.
The door opens within the outer dimensions of
the enclosure body allowing enclosures to be
mounted directly next to each other without the
door interference.
The mounting plate can be set up and wired
outside the enclosure. It is placed subsequently
in the enclosure:
• either against the rear wall of the enclosure
• or using a mounting kit, which is adjustable
in depth.
Furthermore the mounting plate is equipped with
side markings every 10mm for easy mounting
of the equipment on the mounting plate and
holes in top and bottom have been applied for
cable fixing.
To comply with EMC guidelines, the mounting
plate is manufactured from Sendzimir zinc-plated
steel plate 2-2.5mm thick. This plate provides
an equipotential mass connection between all
devices in the enclosure.
The enclosure offers maximum protection to
the user and equipment by a protection degree
IP 66 - IK 10 as per lEC 60529 and NBN G20- 001
(IP 55 - IK 10 for enclosures with double door
and enclosures with glazed door). When using an
interior door or modular framework or 19” swing
frame, protection degree IP 20 is guaranteed
within the enclosure. Complying with NEMA
4x, 12 and 13.
Possibility for integrated sloping and overhanging
roof is one of the standard options especially
designed for harsh environments.
The enclosures have the UL approval, as per
UL standard 508 and also comply with the CSA
certification mark, as per C22.2 no. 94.
MultiMount® stainless steel
wall mounting enclosures
 The enclosure edge is folded in
the shape of a channel to avoid
water stagnation on the seal.
 Finely pre-grained surface
finish (240s).
 Threaded studs to assist with
equipment mounting.
 Polyurethane one piece gasket
provides a continuous seal
that maximizes the IP rating.
 Concealed hinges providing
130 degree opening and
cleanliness of design.
 Multi-purpose:
mounting plate,
19 inch profiles,
swing frame.
 Sturdy monoblock body.
 Approvals and certifications.
27
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 28 Tuesday, August 2, 2011 5:37 PM
Wall Mounting Enclosures
ASR
Stainless steel single door enclosure
The Eldon ASR range, designed with cleanliness and ingress protection in mind, provides high resistance to corrosion and
ensures performance of equipment. Intended for harsh environments, the ASR range is the ideal solution for food and
chemical industries, pharmaceutical plants, outdoor applications and marine environments.
Technical data
Material: AISI 304 / AISI 316L pre-grained stainless steel
Body: 1.0mm/ 1.5mm ASR0406021 and larger
Door: 1.5mm/ 2mm ASR 1008030 and larger
Mounting plate: 2.0mm galvanized steel.
Frame: Monoblock body, folded and seam welded.
Door: Corner formed in one piece. Surface mounted with 130°
opening. Concealed AISI 304 stainless steel hinges with
removable pin. Can be mounted to give left or right hand opening.
Sealing is ensured by an injected one piece polyurethane gasket.
Inside of door fitted with four welded studs for equipment profiles.
Lock: Eldon customized chrome plated double-bit 3mm lock with
90° movement and anti-vibration mechanism. 1000mm high
enclosures and above have espagnolette three point locking.
Stainless steel lock and other versions are available as
accessories.
Mounting plate: Fixed onto M8 studs welded to the rear of the
enclosure.
28
Wall Mounting
IP 66/NEMA 4X,12,13
IK10
In enclosures with height or width of 800mm or more, the
mounting plate has a fold to all four sides for extra rigidity. By
using the AMG accessory the mounting plate can be adjusted in
depth.
Cable access: No gland plate openings as standard to maximise
sealing and clean lines.
Protection: Corresponds with IP 66 and NEMA 4X, 12 and 13, IK
10.
Finish: 240s pre grained stainless steel (average 0.5 micron).
Delivery: Mounting plate, complete with fitting accessories and
earthing facilities. Packaged in a reusable carton.
Additional information: The use of Thermal Management
Equipment, venting and rainhoods is advised for harsh and
outdoor applications. Please see our general accessories section
and Technical chapter for additional information.
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 29 Thursday, July 14, 2011 3:29 PM
Wall Mounting Enclosures
ASR, IP 66/NEMA 4X,12,13, IK10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
180
240
240
240
360
200
240
300
400
600
400
500
400
600
150
150
150
150
150
150
210
210
210
210
210
210
300
300
210
300
300
300
300
400
400
150
210
210
270
330
370
370
370
470
470
570
570
570
570
770
770
770
970
1170
1170
1370
300
360
400
500
600
800
800
600
1000
1200
800
800
800
1400
800
w N° of locks
190
190
310
150
190
250
350
550
350
450
350
550
550
750
550
550
750
750
750
750
750
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
1*
1*
1*
1*
Usable depth
130
130
130
130
130
130
190
190
190
190
190
190
280
280
190
280
280
280
280
380
380
Weight
2,5
3,2
5,0
4,5
5,0
8,3
11,2
15,8
16,0
17,0
15,8
22,2
25,2
32,4
28,6
32,3
42,0
51,5
59,5
62,3
78,1
Part No.
AISI 304
ASR0182415
ASR0242415
ASR0243615
ASR0302015
ASR0362415
ASR0403015
ASR0404021
ASR0406021
ASR0504021
ASR0505021
ASR0604021
ASR0606021
ASR0606030
ASR0608030
ASR0806021
ASR0806030
ASR0808030
ASR1008030
ASR1208030
ASR1208040
ASR1408040
Part No.
AISI 316L
ASR0182415-316
ASR0242415-316
ASR0243615-316
ASR0302015-316
ASR0362415-316
ASR0403015-316
ASR0404021-316
ASR0406021-316
ASR0504021-316
ASR0505021-316
ASR0604021-316
ASR0606021-316
ASR0606030-316
ASR0608030-316
ASR0806021-316
ASR0806030-316
ASR0808030-316
ASR1008030-316
ASR1208030-316
ASR1208040-316
ASR1408040-316
* 3 point espagnolette locking.
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounting
29
Chapter_01_WALL_MOUNTING__2011_61898_0.fm Page 30 Thursday, July 14, 2011 3:29 PM
Wall Mounting Enclosures
ADR
Stainless steel double door enclosure
The Eldon ADR range, designed with cleanliness and ingress protection in mind, provides high resistance to corrosion and
ensures performance of equipment. Intended for harsh environments, the ADR range is the ideal solution for food and
chemical industries, pharmaceutical plants, outdoor applications and marine environments.
Technical data
Material: AISI 304 / AISI 316L pre-grained stainless
Body: 1.5mm. Door: 2,0mm.
Mounting plate: 2.5mm galvanized steel.
Body: Monoblock body, folded and seam welded.
Door: Corner formed in one piece. Surface mounted with 130°
opening. Concealed AISI 304 stainless steel hinges with
removable pin. Inside of door carries four welded studs for
equipment profiles. Sealing is ensured by an injected one piece
polyurethane gasket.
Lock: Eldon customized chrome plated double-bit 3mm lock with
90° movement and anti-vibration mechanism. Espagnolette three
points locking. Stainless steel lock and other versions are
available as accessories.
30
Wall Mounting
IP 55/NEMA 12, 13
IK10
Mounting plate: Fixed onto M8 studs welded to the rear of the
enclosure. In enclosures with height or width of 800mm or more,
the mounting plate has a fold to all four sides for extra rigidity. By
using the AMG accessory the mounting plate can be adjusted in
depth.
Finish: 240s pre grained stainless steel (average 0.5 micron).
Protection: Corresponds with IP55 and NEMA 12,13, IK10.
Delivery: Mounting plate, complete with fitting accessories and
earthing facilities. Packaged in a reusable carton.
Additional information: The use of Thermal Management
Equipment, venting and rainhoods is advised for harsh and
outdoor applications Please see our general accessories section
and Technical chapter for additional information.
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 31 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
ADR, IP 55/NEMA 12, 13, IK10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
1000
1000
1200
300
300
970
970
950
1150
N° of
locks
1*
1*
Usable
depth
280
280
Weight
59,5
69,7
Part No.
AISI 304
ADR1001030
ADR1001230
Part No.
AISI 316L
ADR1001030-316
ADR1001230-316
* 3 point espagnolette locking.
Dimensions
50
Product specifications, CAD drawings and information available on the website
Wall Mounting
31
CATALOGUE 2011.book Page 32 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
AFS
Stainless steel single door with integrated rain hood enclosure
The Eldon AFS finely pre-grained finish and a design intended to eliminate microbiological traps, combines to provide the
ultimate enclosure for environments where the hygienic requirements are strict . An integral sloping roof offers additional
protection and leads to self-draining of liquids. The AFS range is the ideal solution for food and beverage industries,
biotechnical laboratories and pharmaceutical plants.
Technical data
Material: AISI 304 pre-grained stainless steel/AISI 316L (on
request).
Body: 1.5mm, Door: 1.5mm/2 mm on AFS 10083 and larger.
Mounting plate: 2.0mm galvanized steel.
Body: The top of the body is equipped with a sloping roof at an
angle of between 8 and 20 degrees sloping towards the front,
giving a 10 mm overhang to remove any liquids away from the
door. Folded and seam welded.
Door: Corner formed in one piece. Surface mounted with 130°
opening. Concealed AISI 304 stainless steel hinges with
removable pin. Can be mounted to give left or right hand opening
(Machining is required). Sealing is ensured by an injected one
piece polyurethane gasket. Inside of door fitted with four welded
studs for equipment profiles.
Lock: Chrome plated double-bit 3mm lock with 90° movement.
Stainless steel lock and other locks available on request.
32
Wall Mounting
IP 66/NEMA4x ,12,13
IK 10
Mounting plate: Fixed onto M8 studs welded to the rear of the
enclosure. In enclosures with height or width of 800 mm or more,
the mounting plate has a fold to all four sides for extra rigidity. By
using the AMG accessory the mounting plate can be adjusted in
depth.
Cable access: No gland openings as standard to maximise the
sealing and clean lines according to the HACCP.
Protection: Corresponds with IP 66 and NEMA 4X, 12, 13, IK10
Finish: 240s pre grained stainless steel (average 0.5 micron).
Delivery: Mounting plate, complete with fitting accessories and
earthing facilities. Packaged in a re-usable carton.
Additional information: The use of Thermal Management
Equipment, and venting should be utilised for harsh and outdoor
applications Please see our general accessories section and
Technical chapter for additional information.
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 33 Monday, July 11, 2011 2:29 PM
Wall Mounting Enclosures
AFS, IP 66/NEMA4x ,12,13, IK 10
With mounting plate
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
300
400
200
300
400
600
500
400
600
155
155
210
210
210
210
210
300
300
210
300
210
300
300
300
300
400
400
275
375
375
375
475
575
575
575
575
775
775
775
775
975
1175
1175
1175
1375
150
250
350
550
450
350
550
550
750
550
550
750
750
750
550
750
750
750
500
600
800
600
800
800
1000
1200
800
600
800
1400
800
N° of
locks
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
Usable
depth
135
135
190
190
190
190
190
280
280
190
280
190
280
280
280
280
380
380
Weight
5,6
8,3
11,2
15,8
17,0
15,8
22,2
25,2
32,4
28,6
32,3
37,2
42,0
51,5
48,5
59,5
62,3
78,1
Part No.
AISI 304
AFS03021
AFS04031
AFS04042
AFS04062
AFS05052
AFS06042
AFS06062
AFS06063
AFS06083
AFS08062
AFS08063
AFS08082
AFS08083
AFS10083
AFS12063
AFS12083
AFS12084
AFS14084
Part No.
AISI 316L
AFS03021-316*
AFS04031-316*
AFS04042-316*
AFS04062-316*
AFS05052-316*
AFS06042-316*
AFS06062-316*
AFS06063-316*
AFS06083-316*
AFS08062-316*
AFS08063-316*
AFS08082-316*
AFS08083-316*
AFS10083-316*
AFS12063-316*
AFS12083-316*
AFS12084-316*
AFS14084-316*
* Delivery times upon request
Dimensions
DD+10
W-50
148
W
=
DD-20
76.5
148
=
HH-25
H
H
50
85
DD
50
W-100
50
W-62.5
Product specifications, CAD drawings and information available on the website
Wall Mounting
33
CATALOGUE 2011.book Page 34 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
AMP, Mounting plate
AMI, Insulated mounting plate
.
.
Description: Steel mounting plate for MultiMount enclosure.
All sides from 800 mm and above are strengthened by folded
edges. By using the AMG accessory, the mounting plate
position can be adjusted to any depth.
Material: Galvanized steel.
Pack quantity: 1 piece.
Description: Insulated mounting plate for MultiMount
enclosures. By using the AMG accessory, the mounting plate
position can be adjusted to any depth.
Material: Bakelite
Pack quantity: 1 piece.
Enclosure dimension
H
200
250
300
350
400
500
600
700
800
1000
1200
1400
34
Wall Mounting
W
200
200
250
250
300
600
800
1000
1200
250
300
400
500
600
300
400
500
400
500
600
800
500
400
600
800
1200
600
800
1000
600
800
1000
1000
Enclosure dimension
Mounting plate dimension
h
170
220
220
270
270
270
270
270
270
320
370
370
370
370
470
470
470
570
570
570
570
670
770
770
770
770
970
970
970
1170
1170
1170
1370
w
150
150
200
200
250
550
750
950
1150
200
250
350
450
550
250
350
450
350
450
550
750
450
350
550
750
1150
550
750
950
550
750
950
950
Part No.
AMP02020
AMP02520
AMP02525
AMP03025
AMP03030
AMP03060
AMP03080
AMP03100
AMP03120
AMP03525
AMP04030
AMP04040
AMP04050
AMP04060
AMP05030
AMP05040
AMP05050
AMP06040
AMP06050
AMP06060
AMP06080
AMP07050
AMP08040
AMP08060
AMP08080
AMP08120
AMP10060
AMP10080
AMP10100
AMP12060
AMP12080
AMP12100
AMP14100
H
200
250
300
350
400
500
600
700
800
1000
1200
W
200
200
250
250
300
250
300
400
500
600
300
400
500
400
500
600
800
500
400
600
800
600
800
600
800
Mounting plate dimension
h
170
220
220
270
270
320
370
370
370
370
470
470
470
570
570
570
570
670
770
770
770
970
970
1170
1170
w
150
150
200
200
250
200
250
350
450
550
250
350
450
350
450
550
750
450
350
550
750
550
750
550
750
Part No.
AMI02020
AMI02520
AMI02525
AMI03025
AMI03030
AMI03525
AMI04030
AMI04040
AMI04050
AMI04060
AMI05030
AMI05040
AMI05050
AMI06040
AMI06050
AMI06060
AMI06080
AMI07050
AMI08040
AMI08060
AMI08080
AMI10060
AMI10080
AMI12060
AMI12080
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 35 Thursday, August 4, 2011 3:24 PM
Wall Mounting Accessories
AMT, Telequick mounting plate
AMG, Depth adjust kit
.
.
Description: It simplifies installation and equipment mounting.
Rectangular holes 26 x 11mm to obtain required fixing
positions with snap nuts. The nuts can be moved around within
the rectangular hole. By using the AMG accessory, the
mounting plate position can be adjusted to any depth.
Material: Galvanized steel.
Pack quantity: 1 piece.
Description: To provide depth adjustment for different
accessories: mounting plate, 19" profiles and inner door. In
stainless steel enclosure machining is required.
Material: 2mm galvanized steel.
Depth adjustment: Distance to the door D-35 to 65mm.
Pack quantity: 2 pairs with mounting accessories.
Enclosure dimension
H
400
500
600
700
800
1000
1200
W
300
400
500
600
300
400
500
400
500
600
800
500
400
600
800
600
800
600
800
Mounting plate dimension
h
370
370
370
370
470
470
470
570
570
570
570
670
770
770
770
970
970
1170
1170
w
250
350
450
550
250
350
450
350
450
550
750
450
350
550
750
550
750
550
750
Part No.
AMT04030
AMT04040
AMT04050
AMT04060
AMT05030
AMT05040
AMT05050
AMT06040
AMT06050
AMT06060
AMT06080
AMT07050
AMT08040
AMT08060
AMT08080
AMT10060
AMT10080
AMT12060
AMT12080
Enclosure dimension
D
155
210
260
300
400
AMTE, Spacer bolts
.
Description: For depth adjustment of the mounting plate.
Metric thread M8.
Material: Zinc plated steel.
TN, Snap nuts for telequick plates
.
Length
Description: Nuts to be used in the telequick mounting plates.
Pack quantity: 50 pieces.
Thread
M4
M5
M6
Part No.
AMG155
AMG210
AMG260
AMG300
AMG400
Part No.
10
12
14
16
18
20
30
40
50
55
100
Pack
quantity
50
50
50
50
50
50
50
20
20
20
20
Part No.
AMTE8010
AMTE8012
AMTE8014
AMTE8016
AMTE8018
AMTE8020
AMTE8030
AMTE8040
AMTE8050
AMTE8055
AMTE8100
TN04
TN05
TN06
Product specifications, CAD drawings and information available on the website
Wall Mounting
35
CATALOGUE 2011.book Page 36 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
AW, Wall mounting brackets
ADT, Transparent doors
.
.
Description: Mounting brackets for safe wall fixing. It includes
the sealing washers to guarantee the IP rating.
Material: 3mm zinc plated steel.
Pack quantity: 4 brackets with mounting accessories.
Part No.
AW41
AWS, Wall mounting brackets
.
Description: Mounting brackets for safe wall fixing. It includes
the sealing washers to guarantee the IP rating. In stainless
steel machining is required.
Pack quantity: 4 brackets with mounting accessories.
Material
4mm chrome plated steel
3mm stainless steel 316
Part No.
AWS41
AWS41-316
EPF, Enclosures pole fixation
.
Description: To replace the standard door, it provides a clear
view of the components installed inside the enclosure. Allows
all the options of the locking program.
Material: 1.2mm mild steel / 1.4mm ADT06060R5 and above /
1.8mm ADT10060R5 and above, and 3mm transparent acrylic
glass.
Finish: RAL 7035 structure powder coating.
Protection: Complies with IP 55
Pack quantity: 1 door.
Enclosure dimension Viewing area
H
W
h
w
300
250
159
93
300
159
143
400
300
259
143
400
259
243
500
300
359
143
400
359
243
600
400
459
243
500
459
343
600
459
443
700
500
559
343
800
600
659
443
1000
600
859
427
800
859
627
1200
600 1059
427
800 1059
627
* 3 point espagnolette locking.
N° of
locks
1
1
1
1
1
1
2
2
2
2
2
1*
1*
1*
1*
Part No.
ADT03025R5
ADT03030R5
ADT04030R5
ADT04040R5
ADT05030R5
ADT05040R5
ADT06040R5
ADT06050R5
ADT06060R5
ADT07050R5
ADT08060R5
ADT10060R5
ADT10080R5
ADT12060R5
ADT12080R5
MMH, Hinges
.
Description: Accessory to fix MultiMount enclosures on poles.
Maximum pole diameter of 400mm. Additional machining is not
required.
Material: Galvanized steel.
Pack quantity: 2 profiles and mounting accessories.
Enclosure dimension
W
300
400
500
600
800
36
Wall Mounting
Part No.
EPF0300
EPF0400
EPF0500
EPF0600
EPF0800
Description: Door hinges that allow the door to open 180º.
Machining is required.
Material: Zinc plated steel.
Pack quantity: Hinges with mounting accessories.
For enclosure
H
≤ 800mm
> 800mm
Part No.
MMH02
MMH03
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 37 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
ADC, Glazed door with clear glass
ADCS, Glazed door with clear glass
.
.
Description: To replace the standard door, it provides a clear
view of the components installed inside the enclosure. Allows
all the options of the locking program.
Material: 1.2mm mild steel / 1.4mm ADC06060R5 and above /
1.8mm ADC10060R5 and above, and 4mm clear safety glass.
Finish: RAL 7035 structure powder coating.
Protection: Complies with IP 55 and NEMA 12,13
Pack quantity: 1 door.
Description: To replace the standard door, provides a clear
view of the components installed inside the enclosure.
Allows all the options of the locking program.
Material: 1.5mm AISI 304 stainless steel, 2mm ASR 1008030
and above, and 4mm clear safety glass.
Finish: 240s pre-grained stainless steel (average 0.5 micron)
Protection: Complies with IP 55 and NEMA 12, 13.
Pack quantity: 1 door
Enclosure dimension Viewing area
H
W
h
w
300
250
159
93
300
159
143
400
300
259
143
400
259
243
500
300
359
143
400
359
243
600
400
459
243
500
459
343
600
459
443
700
500
559
343
800
600
659
443
1000
600
859
427
800
859
627
1200
600
1059
427
800
1059
627
* 3 point espagnolette locking.
Enclosure dimension Viewing area
H
W
h
w
360
240
219
83
400
300
259
143
400
259
243
600
259
443
500
500
359
343
600
400
459
243
600
459
443
800
459
643
800
600
659
443
800
659
643
1000
800
859
643
1200
800
1059
643
1400
800
1259
643
* 3 point espagnolette locking.
N° of
locks
1
1
1
1
1
1
2
2
2
2
2
1*
1*
1*
1*
Part No.
ADC03025R5
ADC03030R5
ADC04030R5
ADC04040R5
ADC05030R5
ADC05040R5
ADC06040R5
ADC06050R5
ADC06060R5
ADC07050R5
ADC08060R5
ADC10060R5
ADC10080R5
ADC12060R5
ADC12080R5
Product specifications, CAD drawings and information available on the website
N° of
locks
1
1
1
1
2
2
2
2
2
2
1*
1*
1*
Part No.
ADCS03624
ADCS04030
ADCS04040
ADCS04060
ADCS05050
ADCS06040
ADCS06060
ADCS06080
ADCS08060
ADCS08080
ADCS10080
ADCS12080
ADCS14080
Wall Mounting
37
CATALOGUE 2011.book Page 38 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
ADA/ADAB, Glazed aluminium door
ACA/ACB, Display aluminium panel
.
.
Description: To replace the steel door. Can be used in
combination with swing frame, modular chassis or inner door.
The double-bit 3mm lock can be replaced by any optional
insert or handle. It increases the enclosure depth in 10mm
(ADA) or 35mm (ADAB). Can also be used as a viewing
window when used in combination with mounting kit ADAMK/
ADABMK.
Material: Aluminium and 3mm acrylic glass.
Finish: Anodised aluminium.
Protection: Complies with IP 54.
Pack quantity: 1 door with mounting accessories.
Description: For controls, meters, indication lamps etc. The
mounted components are protected by a 23.5mm high frame.
The aluminium panel is 3mm thick and can be removed for
drilling or screen printing. The double-bit 3mm lock can be
replaced by any optional insert or handle.
Material: Aluminium.
Finish: Anodised aluminium.
Protection: Complies with IP 54.
Pack quantity: 1 door with mounting accessories.
Enclosure dimension Viewing area
H
W
h
w
300
300
226
226
400
300
326
226
400
326
326
600
326
526
500
300
426
226
400
426
326
600
400
522
322
600
522
522
800
522
722
700
500
622
422
800
600
722
522
1000
800
922
722
1200
600
1122
522
800
1122
722
N° of
locks
1
1
1
1
1
1
2
2
2
2
2
2
2
2
Part No.
ADA03030
ADA04030
ADA04040
ADA04060
ADA05030
ADA05040
ADAB06040
ADAB06060
ADAB06080
ADAB07050
ADAB08060
ADAB10080
ADAB12060
ADAB12080
AVB, Vertical mounting profiles
.
Enclosure dimension Viewing area
H
W
h
w
300
300
226
226
400
300
326
226
400
326
326
600
326
526
500
300
426
226
400
426
326
500
426
426
600
400
522
322
600
522
522
800
522
722
700
500
622
422
800
600
722
522
800
722
722
1000
600
922
522
800
922
722
1200
600
1122
522
800
1122
722
N° of
locks
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
Part No.
ACA03030
ACA04030
ACA04040
ACA04060
ACA05030
ACA05040
ACA05050
ACB06040
ACB06060
ACB06080
ACB07050
ACB08060
ACB08080
ACB10060
ACB10080
ACB12060
ACB12080
AVP, 19" profiles
.
Description: For the mounting of swing frames in full and
partial height. The SFBP is mounted directly to the AVB.
Equipped with 25 mm hole pattern. For other mounting
purposes CNM cage nuts can be used. Fitted onto hinge holes
in the front frame of the enclosure. In stainless steel enclosure
machining is required.
Material: 2mm galvanized steel.
Pack quantity: 1 pair with mounting accessories.
For enclosure
H
600
800
1000
1200
1400
38
Wall Mounting
Part No.
AVB0600
AVB0800
AVB1000
AVB1200
AVB1400
Description: For 600mm width enclosures. Adjustable depth
position with AMG accessory. Usable depth between 19"
profiles and external door: 56mm. Fitted onto hinge holes in
the front of the enclosure. In stainless steel enclosure
machining is required.
Material: 2mm galvanized steel.
Pack quantity: 1 pair with mounting accessories.
For enclosure
H
600
800
1000
1200
Height U
12
17
20
26
Part No.
AVP0600
AVP0800
AVP1000
AVP1200
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 39 Tuesday, August 2, 2011 6:56 PM
Wall Mounting Accessories
AC, Modular chassis
ADI, Inner doors
.
.
Description: Used for easy mounting of DIN-rail components
with a maximum height of 68mm. Distance between rows
125mm. If required, the standard enclosure door can be
replaced with a glazed door. Usable depth between front cover
and external door: 35mm. Adjustable depth position with AMG
accessory. In stainless steel enclosure machining is required.
Material: DIN-rails PP0735 made of 1.20mm galvanized steel,
vertical profiles 1.5mm mild steel, and front cover 1.5mm mild
steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: Slotted front panel, two vertical profiles, top
and bottom blank panels, one DIN-rail per row, and mounting
accessories.
Description: For controls, meters, lamps, etc. Hinges can be
mounted to allow left or right hand opening. Lock double-bit
3mm insert; 700mm high doors and above have 2 locks.
Usable depth between inner and external door: 35mm.
Adjustable depth position with AMG accessory. Workable area:
H-55, W- 108. In stainless steel enclosure machining is
required.
Material: Door 1.5mm mild steel, and vertical profiles 2mm
mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: Inner door, two vertical profiles and mounting
accessories.
Enclosure dimension
H
400
500
For enclosure
H
W
300
250
400
300
500
400
600
400
600
700
500
800
600
1000
600
800
N° of
modules
16
33
48
64
108
110
162
216
304
N° of
rows
2
3
3
4
4
5
6
8
8
600
Part No.
AC03025R5
AC04030R5
AC05040R5
AC06040R5
AC06060R5
AC07050R5
AC08060R5
AC10060R5
AC10080R5
700
800
1000
1200
W
300
400
500
600
300
400
500
400
500
600
800
500
400
600
800
600
800
600
800
h
345
345
345
345
445
445
445
545
545
545
545
645
745
745
745
945
945
1145
1145
w
192
292
392
492
192
292
392
292
392
492
692
392
292
492
692
492
692
492
692
N° of
locks
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
Part No.
ADI04030R5
ADI04040R5
ADI04050R5
ADI04060R5
ADI05030R5
ADI05040R5
ADI05050R5
ADI06040R5
ADI06050R5
ADI06060R5
ADI06080R5
ADI07050R5
ADI08040R5
ADI08060R5
ADI08080R5
ADI10060R5
ADI10080R5
ADI12060R5
ADI12080R5
ADIS, Inner doors
ADSW, MultiMount door switch
.
.
Description: To activate any electrical device (Lighting,
signalling, alarm, etc.). Cable entry M20. In stainless steel
enclosure, machining is required.
Switch capacity: 6A / 230V.
Approvals: UL and CSA approved.
Pack quantity: 1 piece with mounting accessories.
Part No.
ADSW01
Description: For controls, meters, lamps, etc. Hinges can be
mounted to allow left or right hand opening (Machining is
required). Double-bit 3mm lock, 500mm high doors and above
have 2 locks. Usable depth between inner and external door:
35mm, adjustable depth position with AMG accessory.
Workable area: H-55, W-108.19" version also available.
Material: Door 1.5mm AISI 304 stainless steel.
Finish: 240s pre-grained stainless steel (average 0.5 micron)
Pack quantity: 1 piece with mounting accessories.
Enclosure dimension
H
W
Part No.
400
300
ADIS04030
500
500
ADIS05050
600
400
ADIS06040
600
ADIS06060
800
600
ADIS08060
1000
800
ADIS10080
1200
800
ADIS12080
To order 19"version, please add I19 to the catalogue no, e.g.
ADIS04030I19
Product specifications, CAD drawings and information available on the website
Wall Mounting
39
CATALOGUE 2011.book Page 40 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
ADO, Door stop
ALL, Locks
.
.
Description: Alternative locks to replace the standard one.
Pack quantity: 1 piece.
Description
Description: Door stop for height 300mm enclosures and
above. To secure the door in an open position allowing a 90º or
110º opening. Mounted directly to the door profile studs.
Machining is required.
Pack quantity: 1 piece with mounting accessories.
Material
Part No.
Zinc plated steel
Stainless steel
ADO201
ADO200S
Polyamide lock with
cylinder
Eldon lock with cylinder
Chrome plated lock with
cylinder
ADA/ACA lock with
cylinder
ADAB/ACB lock with
cylinder
Type
Part No.
Key 333
ALL509
Ronis key n° C21323
ALL510
Ronis key n° C21323
ALL508
Ronis key n° C21323
ALL506
Ronis key n° C21323
ALL507
ALLS, Double-bit 3mm stainless steel lock
MMDP, Door mounting profiles
.
.
Description: Stainless steel double-bit 3mm lock
Description
Part No.
AISI 304 stainless steel
AISI 316L stainless steel
ALLS304
ALLS316
ALT, Handles
Description: To strengthen the door, mounted on the inside of
the door on the M6 welded studs. equipped with 10mm hole
pattern.
Material: 1.4mm galvanized steel.
Dimension: 15 x 14mm.
Pack quantity: 1 pair with mounting accessories.
For enclosure
H
500
600
700
800
1000
1200
1400
Part No.
MMDP050
MMDP060
MMDP070
MMDP080
MMDP100
MMDP120
MMDP140
.
Description: Alternative handles to replace the standard lock.
Pack quantity: 1 piece.
Description
Part No.
Plastic handle
Plastic handle with cylinder lock,
Key 5333
Chrome plated T-handle with cylinder lock, key
C21323
Chrome plated handle with cylinder lock, key
C21323
40
Wall Mounting
ALT560
ALT563
ALT561
ALT562
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 41 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
LSK, Keys
LSMK, Lock system multi key
.
.
Description: Key with Eldon logo. Easy to use design and
provides a good grip.
Material: Die cast alloy
Pack quantity: 1 piece
Description: Multi-Key function with Eldon logo and a different
key in every end: double-bit 5mm, square 8mm, triangle 8mm
and a standard hexagonal adaptor to use with the screw ends.
Material: Steel.
Pack quantity: 1 piece.
Description
Part No.
Plastic double-bit 3mm
Metallic double-bit 3mm
Metallic double-bit 5mm
Metallic Square 7mm
Metallic Square 8mm
Metallic Triangle 7mm
Metallic Triangle 8mm
LSK502
LSK503
LSK505
LSK523
LSK524
LSK526
LSK527
Part No.
LSMK01
PLC, Padlocking
.
ALI, Inserts
.
Description: Inserts to replace the standard double-bit 3mm
insert in the standard polyamide lock.
Material: Polyamide.
Pack quantity: 1 piece.
Description
Double-bit 3mm
Double-bit 5mm
Square 7mm
Square 8mm
Triangular 8mm
Slotted 2x4mm
Part No.
ALI503
ALI505
ALI523
ALI525
ALI524
ALI528
Description: The padlocking cover is mounted over the
existing standard lock. The standard lock is totally covered and
not accessible when padlock is fitted. Maximum padlock bow
diameter of 10mm.
Material: Stainless steel
Pack quantity: 1 piece
Description
Padlocking cover
Product specifications, CAD drawings and information available on the website
Part No.
PLC01
Wall Mounting
41
CATALOGUE 2011.book Page 42 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
ARF, Rain hood
ASST, Rain hood
.
.
Description: To be fitted as an outdoor shelter on single
mounted enclosures. The roof is slightly sloped and has a
dripstrip. Machining is required. It increases the enclosure
dimension in H:60mm, D:20mm and W:20mm
Material: 1.5mm mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: 1 rainhood with mounting accessories.
Description: To be fitted as extra protection on single
mounted enclosures. The roof is slightly sloped and has a
dripstrip. Machining is required.
Material: AISI 304 / AISI 316L pre-grained stainless steel
Finish: 240s pre-grained stainless steel (average 0.5 micron)
Pack quantity: 1 rain hood with mounting material.
W
D
400
600
Enclosure dimension
W
D
250
155
210
300
155
210
400
155
210
260
300
500
155
210
260
300
600
210
260
300
400
800
210
260
300
400
1000
300
1200
300
Part No.
ARF02515R5
ARF02521R5
ARF03015R5
ARF03021R5
ARF04015R5
ARF04021R5
ARF04026R5
ARF04030R5
ARF05015R5
ARF05021R5
ARF05026R5
ARF05030R5
ARF06021R5
ARF06026R5
ARF06030R5
ARF06040R5
ARF08021R5
ARF08026R5
ARF08030R5
ARF08040R5
ARF10030R5
ARF12030R5
AL, Lifting eyes
.
210
210
300
800
210
300
400
1000
300
1200
300
*Delivery times upon request
Part No.
AISI 304
ASST042
ASST062
ASST063
ASST082
ASST083
ASST084
ASST103
ASST123
Part No.
AISI 316L
ASST042-316*
ASST062-316*
ASST063-316*
ASST082-316*
ASST083-316*
ASST084-316*
ASST103-316*
ASST123-316*
EFCS, Protective fan cover
.
Description: Provides additional protection to the filter fans
against the ingress of water in outdoor or wash down
envirnoments. Folded and seam welded. (Machining is
required)
Material: AISI 304 / AISI 316L stainless steel
Finish: 240s pre-grained stainless steel
Pack quantity: 1 piece
Delivery: Fixing studs, nuts
Fan Cover
Suitable for
fans
144 134 100 EF100 / EF200
275 265 100 EF250 / EF300
353 343 100 EF500 / EF700
*Delivery times upon request
H
Description: M12 thread. Complies with DIN580 lifting
requirements. Machining is required.
Material: Steel.
Pack quantity: 2 eye-bolts, 2 reinforcements and mounting
accessories.
W
D
Part No.
AISI 304
EFCS20
EFCS25-30
EFCS50-60
Part No.
AISI 316L
EFCS20-316*
EFCS25-30-316*
EFCS50-60-316*
Part No.
AL9301
42
Wall Mounting
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 43 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
P, Plinth front and rear
MSVS, Plinths
.
.
Description: Four corner pieces with removable front covers.
The side panels PA must be ordered separately. Available
heights: 100 and 200mm. Machining is required.
Material: 2.5mm mild steel for corner pieces, and 1.5mm mild
steel for covers.
Finish: RAL 7022 structure powder coating.
Pack quantity: 4 corner pieces and 2 front covers, with
mounting accessories.
Description: Four U-section side pieces fixed by screws to the
corner sections. (Machining is required)
Material: 2 mm AISI 304/AISI 316L pre-grained stainless steel
Finish: 240s pre-grained (0,5 microns average).
Pack quantity: 1 plinth with mounting material
H
W
Part No.
100
400
500
600
800
1000
1200
400
500
600
800
1000
1200
P1040
P1050
P1060
P1080
P1100
P1120
P2040
P2050
P2060
P2080
P2100
P2120
200
H
W
100
600
800
D
300
300
400
1000
300
1200
300
*Delivery times upon request
Part No.
AISI 304
MSVS1063
MSVS1083
MSVS1084
MSVS1103
MSVS1123
Part No.
AISI 316L
MSVS1063-316*
MSVS1083-316*
MSVS1084-316*
MSVS1103-316*
MSVS1123-316*
PFF, Floor stands
.
PA, Plinth side panels
.
Description: Floor stands for floor mounting to give a suitable
operation height. Available for 300 and 400mm depth
enclosures with W≥ 400mm. 300 or 450 mm high are available.
Machining is required
Material: 2.0 mm mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: 2 pieces with mounting accessories.
Description: Side covers for plinth P, strengthened by folded
edges.
Material: 1.5mm mild steel.
Finish: RAL 7022 structure powder coating.
Pack quantity: 2 pieces for height 100 mm, and 4 pieces for
height 200 mm.
H
D
Part No.
100
260
300
400
260
300
400
PA1026
PA1030
PA1040
PA2026
PA2030
PA2040
200
H
D
Part No.
300
450
300
450
300
300
400
400
PFF330R5
PFF345R5
PFF430R5
PFF445R5
Product specifications, CAD drawings and information available on the website
Wall Mounting
43
CATALOGUE 2011.book Page 44 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
AF, Standard gland plate
AFR, Ventilated gland plate
.
.
Description: Gland plate for the standard gland opening.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: 1 piece.
Description: Louvered plate, pressed out 5 mm.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Protection: Complies with IP 23, in bottom or vertical position
Pack quantity: 1 piece.
Size
0S
1S
2S
3S
1
2
3
4
For opening
110 x 56
210 x 56
310 x 56
410 x 56
210 x 96
310 x 96
410 x 96
510 x 96
Part No.
Size
For opening
Part No.
AF00SR5
AF01SR5
AF02SR5
AF03SR5
AF01R5
AF02R5
AF03R5
AF04R5
1
2
3
4
210 x 96
310 x 96
410 x 96
510 x 96
AFR01R5
AFR02R5
AFR03R5
AFR04R5
AFG, Ventilated gland plate with fly-net
.
AG, Gland plate gasket
.
Description: Louvered plate, pressed out 5 mm with fly-net.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Protection: Complies with IP 43, in bottom or vertical position
Pack quantity: 1 piece.
Description: For standard gland plate opening.
Material: 5mm polyethylene foam.
Pack quantity: 1 piece.
Size
For opening
0S
1S
2S
3S
1
2
3
4
110 x 56
210 x 56
310 x 56
410 x 56
210 x 96
310 x 96
410 x 96
510 x 96
Part No.
AG00S
AG01S
AG02S
AG03S
AG01
AG02
AG03
AG04
Size
For opening
1
2
3
4
210 x 96
310 x 96
410 x 96
510 x 96
Part No.
AFG01R5
AFG02R5
AFG03R5
AFG04R5
AGC, Combining gaskets
.
Description: To be used when a MultiMount enclosures
(MAS/MAD/MAP) combination is needed.
Material: 10mm polyethylene foam.
Pack quantity: 2 pieces, and combination mounting
accessories.
44
Wall Mounting
Size
For opening
Part No.
2
3
4
310 x 96
410 x 96
510 x 96
AGC02
AGC03
AGC04
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 45 Monday, August 22, 2011 10:03 AM
Wall Mounting Accessories
AFA, Adapter gland plate
EHTC, Plastic gland plate
.
.
Description: Adapts FL gland plates to the Multimount gland
opening.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: 1 piece.
Size
1
2
3
4
N° of FL
openings
1xFL13
1xFL21
1xFL21
2xFL21
For opening
Part No.
210 x 96
310 x 96
410 x 96
510 x 96
AFA01R5
AFA02R5
AFA03R5
AFA04R5
Description: Gland plate suitable for leading through cables
as well as different types of tubing. To be installed directly to
the adapter gland plate AFA02/AFA03/AFA04.
Material: Different types of polymers reinforced with a steel
plate. Halogen free, and UV resistant.
Protection: Complies with IP65
Finish: RAL 7035
Pack quantity: 1 piece with mounting accessories
AFV, Ventilated gland plate with filter
.
Part No.
EHTC2125G
EHTC213G
EHTC2135G
EHTC2150G
Description: Louvered plate, pressed out 5 mm with filter.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Protection: Complies with IP 53, in bottom or vertical position
Pack quantity: 1 piece.
Size
For opening
Part No.
1
2
3
4
210 x 96
310 x 96
410 x 96
510 x 96
AFV01R5
AFV02R5
AFV03R5
AFV04R5
Product specifications, CAD drawings and information available on the website
Wall Mounting
45
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 46 Monday, July 11, 2011 2:51 PM
Wall Mounting Accessories
AFK, Gland plate with knock-outs
CPG, Cable plastic gland
.
.
Description: Gland plate with knock-outs according to table.
Material: 1.4mm mild steel.
Finish: RAL 7035 structure powder coating.
Pack quantity: 1 piece.
1S
2S
3S
1
For
opening
210 x 56
310 x 56
410 x 56
210 x 96
2
310 x 96
3
410 x 96
4
510 x 96
Size
M16
M20
M25
M32
4
6
9
4
12
9
21
18
21
27
18
3
3
4
5
_
5
_
5
10
5
14
_
1
1
2
1
4
1
4
_
4
3
_
_
_
2
1
2
1
2
_
2
1
Part No.
AFK11SR5
AFK21SR5
AFK31SR5
AFK11R5
AFK12R5
AFK21R5
AFK22R5
AFK31R5
AFK32R5
AFK41R5
AFK42R5
Description: Traditional cable fittings. Known for excellent
strain relief even while providing higher protection class.
Material: Fitting body in polyamide PA6, and sealing in
neoprene
Temperature resistance: -25ºC to +100ºC
Flammability: VO according to UL94
Finish: RAL 7035
Protection: IP 68 at 5 bar
Pack quantity: Depending on the size, see table below
Thread
Cable Size
M12x1,5
M16x1,5
M20x1,5
M25x1,5
M32x1,5
M40x1,5
M50x1,5
M63x1,5
2,5 - 6,5
5,5 - 10
5 - 12
9 - 18
14 - 25
18 - 32
24 - 38,5
35 - 48
Pack
quantity
100
50
50
50
20
10
5
5
Part No.
CPG12
CPG16
CPG20
CPG25
CPG32
CPG40
CPG50
CPG63
CPGN, Plastic gland nut
.
Description: Plastic lock nut to make a safe CPG fixation.
Material: Polyamide
Temperature resistance: -25ºC to +100ºC
Flammability: VO according to UL94
Finish: RAL 7035
Pack quantity: Depending on the size, see table below
46
Wall Mounting
Thread
Pack quantity
Part No.
M12x1,5
M16x1,5
M20x1,5
M25x1,5
M32x1,5
M40x1,5
M50x1,5
M63x1,5
100
100
100
100
100
50
50
50
CPGN12
CPGN16
CPGN20
CPGN25
CPGN32
CPGN40
CPGN50
CPGN63
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 47 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
CAG, Cable anchorage gland
CED, Double protection cable entry
.
.
Description: Two-component grommet with membrane seal
and cable anchorage. The installation does not require tools, it
is self-adjusting to its surrounding wall thickness and click-fixed
in place. Because of its compact design it only extends 5,7mm
outside the enclosure on which it is mounted. The “pushout”
membrane is a permanent seal until it is penetrated by a cable
or pipe. Suitable for holes in materials of 0,7 to 3mm thickness.
Material: TPE and polyamide 66, halogen free
Temperature resistance: -20ºC to +125ºC
Finish: RAL 7035
Protection: IP 67 / IP 65, Waterproof
Pack quantity: 50 pieces
Description: The rubber grommet is very simple to use. The
installation does not require tools, which in turn means lower
work cost. The “pushout” membrane is a permanent seal until it
is penetrated by a cable or pipe. Suitable for holes in materials
of 0,5 to 4mm thickness.
Material: EPDM, halogen free.
Temperature resistance: -40ºC to +110ºC
Finish: RAL 7035
Protection: IP 67
Pack quantity: Depending on the size, see table below
Metric
M20
M25
Cable
Diameter
7-11
7-13
Hole
diameter
20,5
25,5
H
H2
D
17-20
17-20
5,5
5,7
34-37
39-42
Part
No.
CAG20
CAG25
CES, Simple protection cable entry
.
Metric
Cable
Diameter
Hole
diameter
H
H1
Da
(mm)
Pack
qtty
M12
M16
M20
M25
M32
M40
M50
4-7
5-9
8-13
11-17
15-20
19-28
27-35
12,5
16,5
20,5
25,5
32,5
40,5
50,5
12,8
17,7
20,0
21,3
24,6
29,5
34,8
5,6
11,0
13,4
15,3
18,6
21,7
25,0
20,0
21,0
25,5
30,5
38,5
48,5
60,5
50
50
50
50
25
25
10
Part No.
CED12
CED16
CED20
CED25
CED32
CED40
CED50
Description: Simple grommet manufactured in a rubber-like
material. The installation does not require tools. The “pushout”
membrane is a permanent seal until it is penetrated by a cable
or pipe, and you always have a round opening and the IP
guaranteed. It is equipped with a sock that closes tight around
the cable and allows for it to be moved around like a “joy-stick”
in the opening without endangering the IP, so it works
extremely well with cables passing through at an angle.
Suitable for holes in materials of 0,5 to 4,5mm thickness.
Material: TPE (thermoplastic elastomer), halogen free.
Temperature resistance: -50ºC to +125ºC
Finish: RAL 7035
Protection: IP 67
Pack quantity: Depending on the size, see table below
Metric
Cable
Diameter
Hole
diameter
H
H1
D
Pack
qtty
M16
M20
M25
M32
5-10
6-13
8-17
12-24
16,5
20,5
25,5
32,5
11,0
11,0
11,0
11,0
4,0
4,0
4,0
4,0
23,5
27,5
32,5
39,5
50
50
50
25
Part No.
CES16
CES20
CES25
CES32
Product specifications, CAD drawings and information available on the website
Wall Mounting
47
CATALOGUE 2011.book Page 48 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
CEP, Cable entry gland plate
CEPR, Round cable entry gland plate
.
.
Description: Plastic cable entry for a fast, economical and
tool-free incoming of cables and/or pneumatic conduits inside
the enclosure. Integrated seal. Suitable for standard cut-outs
for 24-pin Harting and Wieland connectors. For snap-in
fastening and/or screwing. Snap-in system works at wall
thicknesses of 1.5 to 2.0mm. Installation height: 15.5mm.
Material: Polyamide, and the seal is made of TPU/NBR/
EPDM, halogen free.
Temperature resistance: -30ºC to +70ºC
Flammability: VO according to UL94
Finish: Black
Protection: IP 65
Pack quantity: 1 piece
3-6
4
6
16
29
48
4-8
23
-
Wall Mounting
Openings (mm)
5 - 9 8 - 12 9,5 - 16
4
12
4
4
17
4
2
-
14 - 20
3
-
Part No.
CEP2411
CEP2412
CEP2414
CEP2417
CEP2422
CEP2423
CEP2429
Description: Round plastic cable entry for a fast, economical
and tool-free incoming of cables and/or pneumatic conduits
inside the enclosure. Integrated seal. For snap-in mounting.
Snap-in system works at wall thicknesses of 1.5 to 2.0mm.
Installation height: 9mm outside, and 24-25 inside.
Material: Polyamide, and the seal is made of NBR/EPDM,
halogen free.
Temperature resistance: -30ºC to +90ºC
Flammability: VO according to UL94
Finish: Black
Protection: IP 65
Pack quantity: 1 piece
3-5
19
Openings (mm)
3 - 6,5
7
-
6 - 10
1
-
Part No.
CEPR5008
CEPR6319
Visit our website at www.eldon.com
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 49 Monday, July 11, 2011 3:27 PM
Wall Mounting Accessories
CCF, Connected cable entry gland plate
Wall Mounting Accessories
.
When we need to install an already connected cable
we can not use the traditional glands, and to cover this
requirement Eldon offers you a standard and tested
solution.
Description: Plastic cable entry for a fast, economical and
tool-free incoming of cables fitted with connectors inside the
enclosure. Integrated seal. Suitable for standard cut-outs for
24-pin Harting and Wieland connectors. For snap-in mounting.
Snap-in system works at wall thicknesses of 1.5 to 2.0mm.
Installation height: 14mm.
Material: Polyamide, halogen free.
Temperature resistance: -40ºC to +140ºC
Flammability: VO according to UL94
Finish: Black
Protection: IP 54 with suitable inserts and cables
Pack quantity: 1 piece
Openings
Part No.
10
CCF2410
Our Connected cable entry gland plate solution lets us
define the grommet’s diameter, and their position
according to our installation. The frame CCF has 10
openings which must be covered with the 10 grommets
which we need, and if we do not need to use all the
grommets with cable hole we will use a dummy
grommet to maintain the IP.
CCG, Cable entry grommet
.
Description: Mounted with the CCF cable entry can be used
to easily route cables fitted with connectors. The insert is
positioned around the cable. It is equipped with catch hooks
that anchor themselves in the CCF cable entry. Strain relief is
achieved using a simple cable tie.
Material: Thermoplastic rubber, halogen free.
Temperature resistance: -40ºC to +80ºC
Flammability: HB according to UL94
Finish: Black
Protection: IP 54 with suitable gland plate and cable
Pack quantity: 10 pieces
Cable Diameter (mm)
Part No.
0
3-4
4-5
5-6
6-7
7-8
8-9
9-10
10-11
11-12
12-13
13-14
14-15
15-16
CCG00
CCG03
CCG04
CCG05
CCG06
CCG07
CCG08
CCG09
CCG10
CCG11
CCG12
CCG13
CCG14
CCG15
These type of cables are usually connected to mobile
equipment ( printers, hand control panels,
keyboards… ) and it is usual that sometimes there are
strains. To avoid that these strains can interrupt the
inside connection the grommets CCG provide strain
relief only using a simple cable tie
Product specifications, CAD drawings and information available on the website
Wall Mounting
49
Chapter_01_WALL_MOUNTING__2011_61898_1.fm Page 50 Thursday, July 21, 2011 11:01 AM
Wall Mounting Accessories
ACM, Modular vertical support
MCP, Modular slotted panel
.
.
Description: Support kit for the mounting of the modular
panels and components by steps of 150mm. A space for
equipment of 46mm high is provided. Independent of the depth
of the enclosure, the system can be used in combination with
glazed door and a mounting plate is still usable. 50mm of
space is provided for the equipment between the door and the
panels. In order to allow easy installation of the equipment and
the wiring, the system can be assembled, fully equipped and
pre-wired outside the enclosure, and then fitted into the
enclosure. Cut-outs are provided on the sides of the vertical
profiles for cable routing. The kit contains two vertical profiles,
top and bottom blanking plates and fixing material.
Material: 1.35mm steel plate. Structure powder paint, RAL
7035.
Pack quantity: 1 kit with fitting material.
Description: Front panel for modules. Provided with one DIN
rail (PP 1535) per row for MCB (Mini Circuit Bracker).
Material: 1.2mm steel plate.
Finish: Structure powder paint, RAL 7035.
Pack quantity: 1 piece with mounting material.
H
W
150
600
800
600
800
600
800
600
800
600
800
200
300
450
600
H
W
600
600
800
600
800
600
800
600
800
800
1000
1200
Steps of
50mm
9
9
15
15
18
18
21
21
N° of
modules
24
35
24
35
24
35
24
35
N° of
module
24/1
35/1
24/1
35/1
48/2
70/2
72/3
105/3
96/4
140/4
N° of
rows
1
1
1
1
2
2
3
3
4
4
Part No.
MCP1506R5
MCP1508R5
MCP2006R5
MCP2008R5
MCP3006R5
MCP3008R5
MCP4506R5
MCP4508R5
MCP6006R5
MCP6008R5
Part No.
ACM06060R5
ACM06080R5
ACM08060R5
ACM08080R5
ACM10060R5
ACM10080R5
ACM12060R5
ACM12080R5
MIP, Modular instrumentation panel
.
Description: Front panel with cut outs for control meters and
network analyser. To be mounted in a CMV profile for MultiFlex
or in an ACM for a MultiMount enclosure.
Material: 1.2mm steel plate.
Finish: Structure powder paint, RAL 7035.
Pack quantity: 1 piece with mounting material.
H
W
150
600
800
200
50
Wall Mounting
600
800
N° of cut
outs
1
2
4
2
1
2
4
2
1
1
Dim
72 x 72
72 x 72
72 x 72
92 x 92
72 x 72
72 x 72
72 x 72
92 x 92
144 x 144
144 x 144
Part No.
MIP1506-1PR5
MIP1506-2PR5
MIP1506-4PR5
MIP1506-2GR5
MIP1508-1PR5
MIP1508-2PR5
MIP1508-4PR5
MIP1508-2GR5
MIP2006-1SR5
MIP2008-1SR5
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 51 Monday, July 11, 2011 2:29 PM
Wall Mounting Accessories
MBP, Modular blank panel
AMM, Adjustable mounting plate
.
.
Description: Front blank panel to cover unused space or to
mount special equipment. Panels are with flanged top and
bottom to provide extra stiffness.
Material: 1.2mm steel plate.
Finish: Structure powder paint, RAL 7035.
Pack quantity: 1 piece with mounting material.
Description: Allowing fixing MCCBs of any manufacturer
(machining is required). Requires MD depth adjustment kit.
Material: 2mm galvanized steel plate.
Pack quantity: 1 piece.
Steps of
Part No.
50mm
50
600
1
MBP0506R5
800
1
MBP0508R5
100
600
2
MBP1006R5
800
2
MBP1008R5
150
600
3
MBP1506R5
800
3
MBP1508R5
200
600
250A (H)
4
MBP2006R5
800
250A (H)
4
MBP2008R5
300
600
250A (V)
6
MBP3006R5
800
250A (V)
6
MBP3008R5
450
600
400A (V)
9
MBP4506R5
800
400A (V)
9
MBP4508R5
600
600
800A (V)
12
MBP6006R5
800
800A (V)
12
MBP6008R5
900
600
1600A (V)
18
MBP9006R5
800
2500A (V)
18
MBP9008R5
H: MCCB in horizontal assembly, V: MCCB in vertical assembly.
Steps of
Part No.
50mm
194
600
125/160/250A (H)
4
AMM604
244
600
125/160/250A (V)
6
AMM606
294
600
400A (V)
9
AMM609
194
800
125/160/250A (H)
4
AMM804
244
800
125/160/250A (V)
6
AMM806
294
800
400A (V)
9
AMM809
H: MCCB in horizontal assembly, V: MCCB in vertical assembly.
H
W
MCCB
H
W
MCCB
MD, Modular system depth adjust Kit
.
Description: Mounted on to the back of the ACM or CMV
modular system frames, allowing the fixing of the AMM
mounting plate. The mounting plate is adjustable in depth
between 60mm and 150mm from the front covers.
Material: 2mm galvanized steel.
Pack quantity: 4 pieces with fitting material.
Part No.
MD4
Product specifications, CAD drawings and information available on the website
Wall Mounting
51