•
Get two or three nails and some bare copper wire, Use colored magnet wire if you prefer.
•Hold two or three nails together in a cross shape. Wrap a piece of wire diagonally across the wires, then under
the top one, then diagonally across the other way and under the bottom one. Finally, cut the wire and twist the
ends together.
•Wrap another piece of wire several times around the head of one of the nails, then make a loop and twist the
ends together.
•Consider soldering the wire to strengthen it or using a glue gun to secure the nails. Hold the soldering iron to
the nails and wire in the back of the cross at the point where they join. Touch the solder to the hot nails and
wire. Once the solder smokes and settles around the join, remove the soldering iron. Repeat at the top of the
cross to reinforce the loop.
•Add any decorative items to the necklace that you want. You can twist wire around both the sides and bottom
of the cross for decorative effect if you wish.
•Cut a length of cord through the necklace. String it through the wire loop and tie it to itself