Designer
wallplate opening
Diva dimmers, switches, and fan controls
®
2.94 in (75 mm)
Product family features
Large paddle switch with a captive linear-slide
dimmer for a standard designer wallplate opening
•
Preset dimmer
•
Select lighter color models feature built-in soft-glow
locator light*
•
C•L® and eco-dim® models available
•
Coordinating Claro®, Satin Colors®, and Stainless
Steel wallplates only available separately
•
4.69 in (119 mm)
Custom engraving available for wallplates;
see p. 237
•
Control types
Single-pole (one location)
3-way or 4-way (two or more locations)
Direct load type compatibility
Incandescent/halogen lighting
.30 in
(7.6 mm) profile Shown actual size: Diva preset dimmer and
1-gang Claro wallplate in White (WH).
Dimmable CFL/LED lighting (screw-base)
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Switched lighting/fan/motor
Ceiling fans
Load type requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage, and
capacity combinations.
For additional information, see pp. 255 – 259.
* Locator light not available in C•L and 0 –10 V
dimmers, and fan controls
86
Volume 1 P/N 367-1746 REV C
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer
wallplate opening
Diva dimmers and fan controls
®
Available finishes
Use BOLD color code in model number (Example: DV-600P-BR)
Gloss finishes*
WH
White
LA
Light Almond
AL
Almond
IV
Ivory
GR
Gray
BR
Brown
BL
Black
Satin Colors® finishes*
SW
Snow
LS
Limestone
BI
Biscuit
ES
Eggshell
PD
Palladium
TP
Taupe
ST
Stone
BG
Bluestone
PL
Plum
SG
Sea Glass
TQ
Turquoise
GS
Goldstone
DS
Desert Stone
GB
Greenbriar
Metal finish wallplate**
MS
Mocha Stone
TC
Terracotta
SI
Sienna
HT
Hot
MR
Merlot
MN
Midnight
SS
Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see p. 236.
** Stainless Steel wallplate only available separately and includes black plastic trim/adapter, visible from side.
Match with separate Black (BL) or Midnight (MN) controls. For wallplate information, see p. 236
| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C
87
Designer
wallplate opening
Diva dimmers, switches, and fan controls
®
Incandescent/halogen dimmers
Dimmers
/ Dimmable CFL/LED (screw-base) dimmers
Hi-Lume® 1% 2-wire LED driver dimmers
Paddle turns on/off
•
Slide up to brighten,
down to dim
250 W C•L dimmers
•
3-way/single-poleDVCL-253P-XX1
120 V 600 W (Inc) 250 W (CFL/LED)
350 W (Hi-lume 1% LED driver, max. 8)
3-way/single-poleDVSCCL-253P-XX2
120 V 600 W (Inc) 250 W (CFL/LED)
350 W (Hi-lume 1% LED driver, max. 8)
C L dimmers provide
reliable dimming of
dimmable CFLs/LEDs,
as well as halogens and
incandescents
• ®
•
eco-dim® model
guarantees at least 15%
energy savings compared
to a standard switch*
•
Visit www.lutron.com/dimcflled for an approved
list of dimmable CFL/LED bulbs, and how to
calculate wattage when mixing lamp types.
Adjustable low-end trim.
Locator light shines
through paddle on select
lighter colored models
•
Incandescent/halogen dimmers
Dimmers
Single-poleDV-600P-XX1
120 V 600 W
DVSC-600P-XX2
Single-poleDV-10P-XX1
120 V 1000 W
DVSC-10P-XX2
3-wayDV-603P-XX1
120 V 600 W
DVSC-603P-XX2
3-wayDV-103P-XX1
120 V 1000 W
DVSC-103P-XX2
Incandescent/halogen dimmers
/ Dimmable CFL/LED (screw-base) dimmers
150 W C•L dimmers
3-way/single-poleDVCL-153P-XX1
120 V 600 W (Inc) 150 W (CFL/LED)
3-way/single-poleDVSCCL-153P-XX2
120 V 600 W (Inc) 150 W (CFL/LED)
Visit www.lutron.com/dimcflled for an approved
list of dimmable CFL/LED bulbs, and how to
calculate wattage when mixing lamp types.
eco-dim® dimmer
3-way/single-poleDV-603PG-XX3
120 V 600 W
Adjustable low-end trim.
88
XX1:Gloss color codes, see p. 87
XX 2:Satin Colors® codes, see p. 87
XX3:Available in White (WH), Ivory (IV),
Almond (AL) and Light Almond (LA)
Wallplates not included. Order separately,
see p. 236
Volume 1 P/N 367-1746 REV C
All models must be derated if ganged unless
otherwise noted, see pp. 250 – 252 and 254.
* Maximum light output of 85% guarantees
15% energy savings over standard switches
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer
wallplate opening
Diva dimmers and fan controls
®
Magnetic low-voltage dimmers
Dimmers
Single-poleDVLV-600P-XX1
120 V 600 VA (450 W)
DVSCLV-600P-XX2
Single-poleDVLV-10P-XX1
120 V 1000 VA (800 W)
DVSCLV-10P-XX2
3-wayDVLV-603P-XX1
120 V 600 VA (450 W)
DVSCLV-603P-XX2
3-wayDVLV-103P-XX1
120 V 1000 VA (800 W)
DVSCLV-103P-XX2
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed 20%
transformer loss.
/
-wire fluorescent ballast/LED
3
driver dimmers
Dimmers*
3-way/single-poleDVF-103P-XX1
120 V 8 A
DVSCF-103P-XX 2
3-way/single-poleDVF-103P-277-XX1
277 V 6 A
DVSCF-103P-277XX 2
For use with Hi-lume® 3D and EcoSystem®
ballasts, and Hi-lume 1% and Hi-lume
Premier 0.1% LED drivers.
For more information on Hi-lume 1% LED drivers,
visit www.lutron.com/hilumeLED.
No derating required if ganged.
Adjustable low-end trim.
/
Dimmers*
-10 V fluorescent/LED fixture dimmers
0
(current sink control)
Dimmers*
Single-poleDVELV-300P-XX1
120 V 300 W
DVSCELV-300P-XX 2
3-wayDVELV-303P-XX1
120 V 300 W
DVSCELV-303P-XX 2
3-way/single-poleDVSTV-XX1
120–277 V 50 mA max control current
3-way/single-poleDVSCSTV-XX 2
120 – 277 V 50 mA max control current
Electronic low-voltage dimmer
No power pack required.
Dimmer has maximum capacity of 8 A or 50 mA
0 –10 V sink limited by whichever rating is
achieved first.
Compatible with any IEC 60929 Annex E
compliant ballast or driver, available from
many manufacturers (check for IEC 60929
compliance on the specification of the designed
ballast or driver, or confirm compatibility with
the manufacturer).
XX1:Gloss color codes, see p. 87
XX 2:Satin Colors® codes, see p. 87
Wallplates not included. Order separately,
see p. 236
Consult ballast/driver manufacturer for specific
ballast/driver current draw to determine maximum
number of ballasts/drivers per control.
No derating required if ganged.
All models must be derated if ganged unless
otherwise noted, see pp. 250 – 252.
*Requires neutral wire connection
| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C
89
Designer
wallplate opening
Diva dimmers, switches, and fan controls
®
/
-10 V fluorescent/LED fixture dimmers
0
(current sink control – power pack required)
Dimmers*
Tu-Wire® fluorescent ballast dimmers
Dimmers
Single-poleDVTV-XX
30 mA max control current
Single-poleDVSCTV-XX 2
30 mA max control current
1
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
Power Pack: PP-DV or PP-347H.
3-way/single-poleDVFTU-5A3P-XX1
120 V 5 A
DVSCFTU-5A3P-XX 2
Also compatible with Advance Mark X
ballasts; for further information visit
www.lutron.com/advance.
For information on use with Sylvania
POWERSENSE ballasts, contact Technical
Support at 1.800.523.9466.
Consult ballast/driver manufacturer for specific
ballast/driver current draw to determine maximum
number of ballasts/drivers per control.
Compatible with any IEC 60929 Annex E
compliant ballast or driver, available from
many manufacturers (check for IEC 60929
compliance on the specification of the designed
ballast or driver, or confirm compatibility with
the manufacturer).
No derating required if ganged.
90
XX1:Gloss color codes, see p. 87
XX 2:Satin Colors® codes, see p. 87
Wallplates not included. Order separately,
see p. 236
Volume 1 P/N 367-1746 REV C
All models must be derated if ganged unless
otherwise noted, see pp. 250 – 252.
*Requires neutral wire connection
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer
wallplate opening
Diva dimmers and fan controls
®
Mechanical switches
Fan controls
Paddle turns on/off
•
Paddle turns on/off
Use with any 15 A load
•
General purpose
switching of all light
sources and motor loads
•
Available with locator light
•
•
Slide up to increase speed,
down to decrease speed
•
•
3 quiet fan speeds for
increased comfort
For use with only one
ceiling paddle fan
•
Does not include
locator light
•
Designed to prevent
motor hum
•
General purpose switches Fan controls Mechanical switches
Fan controls—quiet 3-speed
Single-poleCA-1PS-XX1
120/277 V 15 A
SC-1PS-XX 2
3-wayCA-3PS-XX1
120/277 V 15 A
SC-3PS-XX 2
3-way/single-poleDVFSQ-F-XX1
120 V 1.5 A
DVSCFSQ-F-XX 2
3-way/single-poleDVFSQ-F-HO-XX1
120 V 2 A
4-wayCA-4PS-XX1
120/277 V 15 A
SC-4PS-XX 2
DVFSQ-F-HO model for use with Hunter Original
Series fans.
Does not include built-in locator light.
Mechanical switches with locator light
No derating required if ganged.
Single-poleCA-1PSNL-XX3
120 V 15 A
SC-1PSNL-XX4
3-wayCA-3PSNL-XX3
120 V 15 A
SC-3PSNL-XX4
4-wayCA-4PSNL-XX3
120 V 15 A
SC-4PSNL-XX4
Rated for: incandescent/halogen, magnetic
low‑voltage, electronic low-voltage, fluorescents,
CFLs, LEDs, general purpose fans and
motor loads.
No derating required if ganged.
XX1:Gloss color codes, see p. 87
XX 2:Satin Colors® codes, see p. 87
XX3:Only available in Almond (AL), Ivory (IV),
Light Almond (LA) and White (WH)
XX4:Available in Biscuit (BI), Eggshell (ES),
Goldstone (GS), Limestone (LS), Sea Glass
(SG) and Snow (SW)
Wallplates not included. Order separately,
see p. 236
| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C
91
Designer
wallplate opening
Diva dimmers, switches, and fan controls
®
Connections overview
Load connections*
Incandescent/
Halogen
LED
Dimmable
CFL/LED
(screw-base)
Lutron
Hi‑lume 1%
2‑Wire
LED Driver
Incandescent/ C•L®
Halogen
Dimmer
Dimmer
C •L
Dimmer
250 W
C •L
Dimmer
Control types (for 2 or more locations)
Dim from one location, switch from the others
Light
Source
3-way
Dimmer
Light
Source
3-way
Dimmer
MLV
Transformer
(by others)
ELV
Transformer
(by others)
MLV
Dimmer
Fluorescent
ELV
Dimmer
LED
Lutron
3‑Wire
Dimming
Ballast
Lutron
3‑Wire
LED Driver
3-wire
Dimmer
3-wire
Dimmer
Fan control from one location, switch from the other
3-way
3-way
Fan Control Switch**
3-way
Switch**
** For 3-way control and 4-way control, use 3-way dimmer/fan
control with mechnical 3‑way or 4‑way switches
92
Electronic
Low-Voltage
Fan
3-way
Switch**
4-way
Switch
(1 or more)
Magnetic
Low-Voltage
Volume 1 P/N 367-1746 REV C
For more information on LED drivers,
visit www.lutron.com/LED.
*For illustration purposes only.
Consult model number pages for specific
voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer
wallplate opening
Diva dimmers and fan controls
®
Load connections* (continued)
Fluorescent
LED
0 –10 V
Dimming
Ballast
(by others)
0 –10 V
LED Driver
(by others)
0 –10 V
Dimmer
0 –10 V
Dimmer
Ceiling
Fan
Fan
Control
Switched
Lighting/Fans/
Motors
Switch
| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C
93
Designer
wallplate opening
Diva dimmers, switches, and fan controls
®
Accessories
Wallplates
4.75 in (121 mm)
Shown actual size:
2-gang Claro® wallplate
in White (WH).
For more information
about Designer wallplates,
see p. 236.
4.69 in (119 mm)
.30 in
(7.6 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Designer electrical
devices, see p. 237.
Tamper resistant, selftesting GFCI receptacle
94
Customizable
6-port frame
Volume 1 P/N 367-1746 REV C
Cable jack
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer
wallplate opening
Diva dimmers and fan controls
®
| 1.800.523.9466 | www.lutron.com/specificationguide Volume 1 P/N 367-1746 REV C
95