Damp/Wet Location Remote Emergency Lighting

advertisement
TYPE:
CATALOG NO.:
General Description
The Symmetry Vandal Series Remote is designed
to provide an attractive emergency lighting solution
for damp/wet location, vandal prone or high abuse
areas. The powerful MR16 halogen lamps are fully
adjustable, and are secured by an attractive molded
lampholder which conceals all lamp head wiring.
The housing and backplate are injection molded
from a premium impact resistant polycarbonate. A
gasket kit is supplied with the standard wet location
product to prevent water entry.
SVR16
Damp/Wet Location Remote
Emergency Lighting
Polycarbonate Construction
6 or 12 Volt Operation
Illumination
Housing
Illumination is provided by two high performance
6 VDC, 5.5 watt or 12 VDC, 12 watt MR16-style
halogen lamps. Lamps are held in an attractive
molded swivel assembly, and are fully adjustable.
IES photometric files are available.
The high abuse housing and backplate are molded
from high impact, GE Lexan® polycarbonate. All
injection molded components meet the UL 94 V-0, 5
VA flame retardant standard for emergency lighting
products.
Installation
White housing is standard, with an optional black
housing available.
Wet location units may be mounted to standard
3-1/2” and 4” octagonal junction boxes.
Dimensions
3.72”
7.66”
(9.45 cm)
(19.46 cm)
8.67”
(22.02 cm)
All units are supplied standard with a UL wet location
listing and tamperproof screw kit. Standard nontamperproof screws are also included with the
product.
Installation is simplified by the use of a snap-together
backplate and housing. When installed with the
supplied tamperproof screw kit, removal from
mounting surface, or removal of outer protective cover
is not possible under normal service conditions
without the use of a torx T-15 bit (supplied with
product).
Code Compliance
UL 924 listed
Dimensions are approximate and subject to change.
UL wet location listed, standard
NFPA 101, NEC, BOCA, OSHA and IBC illumination
standards
Operating Temperature
Range
-49°F (-45°C) to 140°F (60°C)
Ordering Information (Example: SVR16W)
ACCESSORIES
(order as a separate line item)
T15TPTOOL = Tamperproof Tool
SVR16
SERIES
SVR16 = Symmetry Series
Remote
HOUSING
COLOR
W = White
B = Black
BZ = Bronze
Chloride Systems is a Philips group brand
LAMP
TYPE
Blank = 6 V, 5.5 W, MR16
12 = 12 V, 12 W, MR16
Shown: SVR16W
Specification Data for SVR16 Symmetry Vandal Series Remote
Illumination
I.E.S. format photometric data files are available for use with most lighting layout application software.
Contact: Chloride Technical Service for specific layout assistance.
Optical Performance*
6 Volt, 5.5 Watt Lamps
X2
X1
0.28
0.31
0.35
1.04
1.56
1.58
0.90
0.26
0.14
0.20
0.14
0.26
0.90
1.58
1.56
1.04
0.35
0.31
0.28
1’
0.31
0.36
0.57
1.86
3.82
3.55
0.24
1.33
0.13
0.18
0.13
0.24
1.33
3.55
3.82
1.86
0.57
0.36
0.31
2’
0.33
3’
0.41
0.52
1.96
3.40
2.83
0.72
0.17
0.11
0.16
0.11
0.17
0.72
2.83
3.40
1.96
0.52
0.41
0.33
9’
9’
Chart represents (2) luminaires mounted on 18’ centers, mounting height 8’ AFF
X1 = Luminaire Location #1
X2 = Luminaire Location #2
Average initial footcandles at floor = 1.03
Minimum initial footcandles at floor = 0.28
Maximum initial footcandles at floor = 3.82
Maximum to minimum ratio = 13.7:1
12 Volt, 12 Watt Lamps
X1
0.5
X2
0.7
1.0
1.6
1.4
1.7
1.6
1.3
1.0
0.7
0.4
0.2
0.2
0.3
0.4
0.7
1.1
1.4
1.6
1.7
1.7
1.3
0.9
0.6
0.6
1’
0.6
0.8
1.1
1.7
1.9
2.0
1.8
1.4
1.1
0.7
0.4
0.2
0.2
0.3
0.4
0.8
1.1
1.5
1.8
2.0
2.0
1.6
1.1
0.8
0.6
2’
0.6
0.8
1.1
1.5
1.8
1.9
1.6
1.3
0.9
0.6
0.4
0.2
0.2
0.2
0.3
0.6
1.0
1.4
1.7
1.9
1.8
1.5
1.1
0.8
0.6
3’
0.6
0.7
0.9
1.4
1.6
1.7
1.5
1.2
0.8
0.5
0.3
0.2
0.2
0.2
0.3
0.5
0.8
1.2
1.5
1.7
1.7
1.4
1.0
0.7
4’
12’
12’
Chart represents (2) luminaires mounted on 24’ centers, mounting height 8’ AFF
X1 = Luminaire Location #1
X2 = Luminaire Location #2
Average initial footcandles at floor = 1.02
Minimum initial footcandles at floor = 0.2
Maximum initial footcandles at floor = 2.0
Maximum to minimum ratio = 10:1
* The optics layout is intended to be used as a reference only. Standard reflectance, 80/50/20 were used. Chloride Systems is not responsible for site specific conditions that
may alter the results.
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
272 West Stag Park Service Road • Burgaw NC 28425
Telephone: (910) 259 1000 • Facsimile: (800) 258 8803
www.chloridesys.com
C1355R9
6/09 IH
0.6
Download