Reflector Pendant Light Fittings with
High Degree of Protection IP65 and Insulation Class II
Series 3521 - 3551...
Application:
In humid and dusty factories with rough
environmental conditions such as steel
works, building material factories, and
other heavy industries.
Design:
Upper part: Two-piece glass fibre reinforced polyester housing. All electrical components are mounted inside and ready
for connection.
Reflector: Axially symmetrical, anodized
mirror finish pure aluminium with prismatic facet structure (Series 3521/351...)
or plain (Series 3531/3532...).
Safety glass: With frame, hinged and de-
HIT-CE Elite system
Note:
For application under increased requirements
of noise emissions you should order light fittings with low-noise control gears and ignitors or
with ECG.
Technical data:
3521/3541... CE EVG
Control gear: Electronic
Mains voltage: 220 - 240V AC
tachable.
Cable entry: 1 grommet for cable up to
Ø 17mm.
Electrical connection: Simple and quick
due to tool-free hinged upper enclosure
part. Terminal block 3 x 2.5mm². PVC insulated cables may be used.
Mounting: 2 mounting brackets with
holes Ø 9mm..
Ambient temperature: +30°C max.
3521/3541 ...DIM D
Control gear: Electronic
Mains voltage: 220 - 240V AC
Range of dimming: 100% - 50%
(lamp output)
Interface: DALI
SCHUCH Quality - your advantage:
• Robust, chemical resistant polyester housing for applications in most rough
environmental conditions.
• 5 mm thick toughened safety glass with supporting frame
• • Uncompromisingly safe
s II on clas
Insulati
- high quality insulation class II design
Safety
- long term insulation class II due to polyester housing
- dust and water jet proof due to high ingress protection IP65
• Uncompromisingly economic
- facet reflector optimized for an application of tubular
high pressure lamps of high light output. In comparison with a hpmv lamp:
- up to 33% less light fittings i.e. lower energy costs and less capital investment when applying an HIT lamp with the same luminous intensity
- up to 50% less light fittings i.e. lower energy costs and less capital investment when applying an
HCI-TT lamp (ceramic burner lamp) with the same luminous intensity
• installation and maintenance friendly
- tool-free opening hinged and removable cover, directly accessible connection chamber
- tool-free opening hinged and removable safety glass, quick lamp replacement
!
Advantages of the version for energy saving ceramic burner lamps PHILIPS MASTER
COLOUR ELITE compared to quartz burner lamp systems:
3521/41/51... CE EVG
!
• up to 25% energy cost saving by reduced connection power
• further 40% energy cost saving in the dimming operation with 50% luminous flux
• 66% maintenance cost saving by three times longer period of application of
the ELITE lamp
• additionally improved operating efficiency of the luminaire by compact burner
shape and mechanically precise lamp holder system
Energy cost saving
3521... open
Energy costs in %
by application of the facet reflector with quartz or ceramic burner lamps
3521
HME 250
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
144
3521
HQI-T250/D
(or equal)
3521
HCI-TT 250
(or equal)
3521
3521
CDM-T 210
CDM-T 210
ELITE
ELITE
(dim(Dimmbetrieb)
light operation)
Produktkatalog konventionell
05.03.2016-qxp
IP65
3521 - 3551…
with safety glass
Type
HIE
HSE
HIT
HST
Article no.
Lamps
W
Weight
ca. kg 7)
Facet reflector
HIT-CE
... wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
3521/400 HI
3521/400 HS
35210 0007 1)
35210 0011 1)
3541/400 HI
3541/400 HS
35410 0007 1)
35410 0011 1)
3541/250 CE
35410 0015 1)
3541/210 CE EVG 6)
3541/210 CE DIMD 6)
3541/315 CE EVG 6)
35410 0017
35410 0018
35410 0021
1 x HIT4)/HIE 400 2)
9,7
10,8
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
3521/250 CE
35210 0015 1)
1 x HIT-CE 250
9,4
1 x HIT4)/HIE/HST/HSE 250
1 x HIT-CE ELITE 210 5)
35210 0017
8,5
3521/210 CE EVG 6)
3521/210 CE DIMD 6)
35210 0018
1 x HIT-CE ELITE 210 5)
8,5
3521/315 CE EVG 6)
35210 0021
1 x HIT-CE ELITE 315 5)
9,4
narrow-wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
3521/400 HIE
3541/400 HIT
1 x HIT4)/HIE 400 2)
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
1 x HIT-CE 250
1 x HIT4)/HIE/HST/HSE 250
1 x HIT-CE ELITE 2105)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
9,7
10,8
10,8
9,4
8,5
8,5
9,4
narrow beam for ceramic burner lamps, lamp holder PGZ18
3551/210 CE EVG 6)
3551/210 CE DIMD 6)
3551/315 CE EVG 6)
35510 0001
35510 0002
35510 0003
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
8,5
8,5
9,4
plain reflector
narrow beam, for high pressure discharge lamps, lamp holder E40
series
3531
3532
D [mm]
465
565
H [mm]
384
454
1) Uncomp., article no. for comp. see price list.
2) If metal halide lamp to be used is suitable for operating
with HS ballast, please select HS light fitting for higher luminous flux
3) HI lamps with high luminous flux which are suitable for operating with HS (sv) choke (such as OSRAM HQI-E 400D, HQI-E/P
400/D, PHILIPS HPI Plus 400 Bu) or equal.
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
145
35300 00051)
35300 00071)
35300 00111)
1 x HIE/HSE 250
1 x HIE 400 2)
1 x HSE 400
1 x HIE 400 3)
9,2
10,8
11,9
11,9
4) HIT lamps which are suitable for vertical operating position
only
5) PHILIPS Master Colour CDM-T ELITE
6) For lamps without burst protection
7) Weights without packing material
Produktkatalog konventionell
05.03.2016-qxp
Industrieleuchten
Industrial
Light Fittings
3531/250 HI/HS
3532/400 HI
3532/400 HS
3532/400HIE
IP65
3521 - 3551... Z
For areas with heavy dust/dirt accumulation
Areas of application:
Locations with heavy dust/dirt accumulation such as pulp and paper industry,
tile industry, lime stone and cement industry, plaster store etc.
Design:
Like standard types, however:
le!
t possib
retrofi
With safety glass and painted dust protection ring (air guide system) made from
aluminium for protecting the glass
window from dust/dirt accumulation.
Glass pane types SG. Z, (see “Accessories/Spare Parts”).
Advantages of the air guide system:
• protects the glass window from dust/dirt layers
• avoids by air cushion just below the glass pane a deterioration of the luminous intensity that might be caused by
dust/dirt accumulations
• extends quite considerably the maintenance intervals consequently resulting in remarkable cost savings
Type
HIE
HSE
HIT
HST
Article no.
air cushion
dust particles
Lamps
W
Weight
ca. kg 7)
facet reflector
HIT-CE
wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
3541/250 CE Z
3521/41... Z
3521/400 HI Z
3521/400 HS Z
35211 0007 1)
35211 0011 1)
3521/250 CE Z
35211 0015 1)
3521/210 CE Z EVG 6)
3521/210 CE Z DIMD 6)
3521/315 CE Z EVG 6)
35211 0017
35211 0022
35211 0018
1 x HIT4)/HIE 400 2)
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
1 x HIT-CE 250
1 x HIT4)/HIE/HST/HSE 250
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
10,1
11,2
9,8
8,9
8,9
9,8
narrow-wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
3541/400 HI Z
3541/400 HS Z
35411 0007 1)
35411 0011 1)
3541/250 CE Z
35411 0015 1)
3541/210 CE Z EVG 6)
3541/210 CE Z DIMD 6)
3541/315 CE Z EVG 6)
35411 0017
35411 0018
35411 0021
1 x HIT4)/HIE 400 2)
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
1 x HIT-CE 250
1 x HIT4)/HIE/HST/HSE 250
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
10,1
11,2
9,8
8,9
8,9
9,8
narrow beam for ceramic burner lamps, lamp holder PGZ18
3551/210 CE Z EVG 6)
3551/210 CE Z DIMD 6)
3551/315 CE Z EVG 6)
3521/41/51... CE EVG Z
35511 0001
35511 0002
35511 0003
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
8,9
8,9
9,8
plain reflector
3532/400 HI Z
narrow beam for high pressure discharge lamps, lamp holder E40 or PGZ18
3531/250 HI/HS Z
3532/400 HI Z
3532/400 HS Z
35301 00051)
35301 00071)
35301 00111)
1 x HIE/HSE 250
1 x HIE 400 2)
1 x HSE 400
1 x HIE 400 3)
9,6
11,2
12,3
1) - 7) see series 3521/3541...
3531... Z
3532... Z
D [mm]
465
565
H [mm]
454
524
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
146
Produktkatalog konventionell
05.03.2016-qxp
IP65
3521 - 3551... IFS
for applications in food industry areas
ard
S-Stand
h the IF
ance wit
rd
o
cc
a
• in
ible
fit poss
• retro
Application:
Production halls in the food industry, locations which come under the requirements of the IFS (International Food
Standard) cool rooms and cool houses
etc.
Design:
Same as the standard version but with
safety glass and additional shatter-proof
half-dome Polycarbonate bowl ("Sandwich"-design). Glass types SG . IFS see
“Accessories/Spare Parts”
Advantages of the "Sandwich"-design:
•
additional PC cover eliminates the risk of glass splinter falling down (shatter protection)
polycarbonate glass bowl with additional UV protective paint finish
•
•
special paint finish for protection against aggressive cleaning agents and disinfectants available
upon request.
no special lamps with plastic protective coating required
•
suitable for retrofitting
•
•
fulfils the requirements of IFS (International Food Standard) for lighting in areas of risk in food
manufacture and processing
a VDE- and FSA certificate confirms the compliance to the IFS and the food hygiene regulations
•
Type
HIE
HSE
HIT
HST
Article no.
Lamps
W
Weight
ca. kg 7)
wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
HIT-CE
3541/315 CE IFS
3521/3541 ... IFS
3521/400 HI IFS
3521/400 HS IFS
35212 0007 1)
35212 0011 1)
3521/250 CE IFS
35212 0015 1)
3521/210 CE IFS EVG 6)
3521/210 CE IFS DIMD 6)
3521/315 CE IFS EVG 6)
35212 0017
35212 0018
35212 0021
1 x HIT4)/HIE 400 2)
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
1 x HIT-CE 250
1 x HIT4)/HIE/HST/HSE
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
10,4
11,5
10,1
9,2
9,2
10,1
narrow-wide beam for high pressure discharge lamps, lamp holder E40 or PGZ18
35412 0007 1)
35412 0011 1)
3541/250 CE IFS
35412 0015 1)
3541/210 CE IFS EVG 6)
3541/210 CE IFS DIMD 6)
3541/315 CE IFS EVG 6)
35412 0017
35412 0018
35412 0021
1 x HIT4)/HIE 400 2)
1 x HST/HSE 400
1 x HIT4)/HIE 400 3)
1 x HIT-CE 250
1 x HIT4)/HIE/HST/HSE
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
10,4
11,5
10,1
9,2
9,2
10,1
narrow beam for ceramic burner lamps, lamp holder PGZ18
3551/210 CE IFS EVG 6)
3551/210 CE IFS DIMD 6)
3551/315 CE IFS EVG 6)
35512 0001
35512 0002
35512 0003
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 210 5)
1 x HIT-CE ELITE 315 5)
9,2
9,2
10,1
plain Reflector
3531/250 HI/HS IFS
narrow beam for high pressure discharge lamps, lamp holder E40
3531/250 HI/HS IFS
3532/400 HI IFS
3532/400 HS IFS
3521/41/51... CE EVG IFS
35302 0005
35302 0007
35302 0011
1 x HIE/HSE 250
1 x HIE 400 2)
1 x HSE 400
1 x HIE 400 3)
9,9
11,5
12,6
1) - 7) see series 3521/3541...
3531... IFS
3532... IFS
D [mm]
465
565
H [mm]
593
663
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
147
Produktkatalog konventionell
05.03.2016-qxp
Industrieleuchten
Industrial
Light Fittings
3541/400 HI IFS
3541/400 HS IFS
!
Further Series / Versions
– with emergency light circuit (design …SLS) to bypass ignition time for high pressure lamps
– with emergency light lamp holder E27 and separate
terminal
– with slightly structured safety glass
– with wire guard
– with swivel bracket
– with vibration absorbing suspension device (SD), in
combination with swivel bracket only
– in insulation class I
– for higher ambient temperatures > +30°C
Accessories / Spare Parts
Type
Article no.
Toughened safety glass
for 3521, 3531, 3541, 3551
SG 2 IP65
90244 9002
for 3532
SG 3 IP65
90244 9003
Spare safety glass with dust protection ring (air control system)
SG 2 Z IP65
90244 9017
for 3521, 3531, 3541, 3551
SG 3 Z IP65
90244 9018
for 3532
Spare safety glass with additional shatter-proof PC-cover (sandwich construction)
SG 2 IFS IP65
90244 9014
for 3521, 3531, 3541, 3551
SG 3 IFS IP65
90244 9015
for 3532
Spare reflector - wide / narrow-wide beam (faceted structure)
BREF 2 F
90240 9006
for 3521, 3541, 3551
Spare reflectors - narrow beam (plain)
TREF 2
90241 9000
for 3531
TREF 3
90241 9001
for 3532
Safety light device
... SLS
surcharge
safety light system incorporated - with 1 x E27 without lamp
Suspension devices
... SWB
surcharge
swivel bracket
... SD
surcharge
3-point vibration absorbing suspension device for all types
(in combination with swivel bracket only)
SDK
90268
0001
s
vibration absorbing device for chain suspension
Subject
Bitte beachten
to technical
Sie die changes,
Hinweise misprints
im Technischen
and errors.
Anhang!
Technische Änderungen, Druckfehler und Irrtümer vorbehalten.
148
Produktkatalog konventionell
05.03.2016-qxp