Installation Guide
Spectrum System
Dual Fix Pluggable Lighting Control Module
358
61
250
35
66
45/46
Fixing Size Maximum
M8
300
320
No.14
1/2 Turn Fixing
Mains
Output Connector Wiring
Order Code: AX-OPGST18
Alternative: Wieland 34.362.0211.1
L1
Comms
Switched Live
Earth
L1
N
Neutral
Maintained Live
Dimming 0V
N
Dimming Line
N
-
+
E
SCN
L
Input Connector Wiring
Order Code: AX-IPBL4
Alternative: RS 189-6032
0V
In2/Off/LS
In1/On/PD
+V
For Switches requiring 2 wires connect between 0V & Off
For Switches requiring 3 wires connect between 0V,On & Off
P1
AXPL98ATDH
Document AID1001 Iss 3
Installation Guide
Spectrum System
Dual Fix Pluggable Lighting Control Module
LCM Installation
1/2 Turn Fixing
Pluggable Sensors
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXPL98ATDH
Document AID1001 Iss 3
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Single Fix Pluggable Lighting Control Module
288
270
248
Fixing Size Maximum
M6
179
No.14
Pluggable
Sensors
Input from Modular
Wiring Infrastructure
Output to Modular
Wiring Infrastructure
N
L1
N
L1
Output Connector Wiring
Order Code: AX-OPGST18
Alternative: Wieland 34.362.0211.1
Input Connector Wiring
Order Code: AX-IPBL4
Alternative: RS 189-6032
Switched Live
Earth
Neutral
Maintained Live
Dimming 0V
Dimming Line
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXPL98ATDM
Document AID1002 Iss 3
0V
In2/Off/LS
In1/On/PD
+V
For Switches requiring 2 wires connect between 0V & Off
For Switches requiring 3 wires connect between 0V,On & Off
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Hard Wired Lighting Control Module
Mechanical Fixing
380
61
320
32
Fixing Size Maximum
M8
300 335
No.14
30
62
Preferred Cabling Positions for Mains, Input and Communications Wiring
Mains
Input/Output
and Looping
EARTH
NEUTRAL
LIVE
Mains
Input/Output
and Looping
B
A
SPARE
OUTPUT 1
Emergency Test
Outputs
OUTPUT 2
OUTPUT 3
P1
Communications
Bus
OUTPUT 4
Override
Inputs
Override
Inputs
AXHW48ATDH
Document AID1003 Iss 5
Installation Guide
Spectrum System
Hard Wired Lighting Control Module
Wiring
Output Connector Wiring
Input Connector Wiring
Live In
Live In
0V
In2/Off/LS
In1/On/PD
+V
Fused Live Out (Un-switched)
Fused Live Out (Switched)
Dimming 0V (See Note)
Dimming Line
For Switches requiring 2 wires connect between 0V & Off
For Switches requiring 3 wires connect between 0V,On & Off
Four additional Inputs are available using
Plug In RJ12 Connectors/Leads.
Care should be taken not to damage the leads
when replacing the enclosure lid.
Note:
The dimming 0V is internally connected between each output connector.
Output Configurations
Example allows for 4 separate Live feeds giving a
maximum load per Output of 8 Amps
Example allows for a single Live feed giving a
maximum load between all four Outputs of 16 Amps
(Note: Single Phase Only)
(Note: Maximum Load on any 1 output is 8 Amps)
Live Feeds
Live In
Live Out
Live In
Live Out
Loop Terminal
Facility NOT used
LIVE
LIVE
FUSE
FUSE
Live In 1
Live Out 1
RELAY CONTACT
Live Out 1
RELAY CONTACT
FUSE
FUSE
Live In 2
Live Out 2
RELAY CONTACT
Live Out 2
RELAY CONTACT
FUSE
FUSE
Live In 3
Live Out 3
Live Out 3
RELAY CONTACT
RELAY CONTACT
FUSE
FUSE
Live In 4
Live Out 4
Live Out 4
RELAY CONTACT
RELAY CONTACT
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXHW48ATDH
Document AID1003 Iss 5
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
P1
AXDN22ATDH
Din Rail Lighting Control Module
Document AID1004 Iss 4
Installation Guide
Spectrum System
Din Rail Lighting Control Module
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXDN22ATDH
Document AID1004 Iss 4
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Input Module
Mechanical Fixing
Black Tab
C
-
SENSOR SENSOR
8
7
+
SENSOR SENSOR SENSOR
6
5
4
SENSOR SENSOR SENSOR
3
2
1
STATUS LED
POWER LED
0V 2
1
2
1
2
1 +V +V 0V
COMMS LED
0V 2
1
2
1
2
1
2
1
White Tabs
Din Rail Fixing
160
C
-
+
SENSOR SENSOR
8
7
SENSOR SENSOR SENSOR
6
5
4
90
SENSOR SENSOR SENSOR
3
2
1
100
STATUS LED
POWER LED
0V 2
1
2
1
2
1 +V +V 0V
COMMS LED
0V 2
1
2
1
2
1
2
1
Panel Mounting
Fixing Size (3 Per LCM)
Maximum M3.5/No.6
114
Adaptable Box
350
85
30
200
20
140
310
Fixing Size (4 Per Box)
Maximum M4/No.10
P1
AXDN08SH
Document AID1005 Iss 4
Installation Guide
Spectrum System
Input Module
Wiring
Pluggable Sensors
Inputs
Wiring Order
+V
0V
2/Off/LS
1/On/PD
For Switches requiring 2 wires connect between 0V & Off
For Switches requiring 3 wires connect between 0V,On & Off
Note:
Wireable Inputs and Sensor Inputs are connected internally e.g. Wireable Input 1 is connected to Sensor Input 1. This means that only
a combination up to 8 different numbered Inputs can be used either Wireable or Sensor.
An exception to this would be if two Input devices were required to control the same output e.g. two Presence Detectors in one room.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXDN08SH
Document AID1005 Iss 4
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Area Control Unit
Mechanical Fixing
280
255
STATUS
ENTER
UP
CANCEL
DOWN
1
2
3
4
240
303
Fixing Size (4 Per Controller)
Maximum Size M8/No.14
16
55
20
24
Typ.
50
48
Typ.
P1
A1AC31SH
Document AID1006 Iss 2
IEC Mains Output Socket
for Service use only
Installation Guide
Spectrum System
Area Control Unit
Wiring
Ethernet Spine
Connector
Mains Wiring
Live
Earth
Neutral
When using an Ethernet Spine
Ensure that the cable is tied
to the Printed Circuit Board
and that it is protected with
a suitable grommet/gland where
it passes through the housing
Spine/Field Bus Connector Wiring
Override Switch Connector Wiring
Screen
Bus Bus +
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
A1AC31SH
Document AID1006 Iss 2
Common
Off Side
On Side
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
P1
AXDN12DH
Dali Din Rail Lighting Control Module
Document AID1008 Iss 3
Installation Guide
Spectrum System
Dali Din Rail Lighting Control Module
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXDN12DH
Document AID1008 Iss 3
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Dali Sensor
Mechanical Details
31
49
4
Highest Point nearest to
External Bright Light Source
Mechanical Fixing
1.0 mm Material
40/42 mm
2 to 25 mm
Material
45 mm
Diameter Mounting Hole
Diameter Mounting Hole
Wiring
Wiring shown connected to a typical Dali LCM however connection could be
to any point on the Dali Bus
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXDS01SPL Document AID1049 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
5 Button Dali Scene Setting Switch
Wiring
LCM
ADDRESS
Connection to Back Box Earth Terminal
RATINGS MAXIMUM
FUSE
EMERGENCY
5A
5A HBC PROTECTING
EMERGENCY OUTPUT
EM
E
DA
DA
MAINS INPUT
IN OUT
View On Rear of Switch Assembly
L
L
N
POWER LED
COMMS LED
STATUS LED
UP TO
16 BALLASTS
DALI
N
MAINS
ON
+
-
+
-
BUS
+
-
C
+
COOPER CONTROLS LTD
AXDN12DH
MOD LEVEL 6
230V~ 50Hz 5A T45
280703/12345
INPUT 1
-
+V 1
INPUT 2
2 0V +V 1
2 0V
Wiring shown connected to a typical Dali LCM however connection could be
to any point on the Dali Bus
Mechanical Fixing
35mm Deep Single Wall Box
86
Note: Box must be Earthed
1
2
86
3
4
O
Secure Switch Plate through Switch Assembly
to back box using 2 off M3.5 Screws
(Supplied with Plate)
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-DSP5B
Document AID1057 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrols.com
Installation Guide
Spectrum System
7 Button Dali Scene Setting Switch
Wiring
LCM
ADDRESS
Connection to Back Box Earth Terminal
RATINGS MAXIMUM
FUSE
EMERGENCY
5A
5A HBC PROTECTING
EMERGENCY OUTPUT
EM
E
DA
DA
MAINS INPUT
IN OUT
View On Rear of Switch Assembly
L
L
N
POWER LED
COMMS LED
STATUS LED
UP TO
16 BALLASTS
DALI
N
MAINS
ON
+
-
+
-
BUS
+
-
C
+
COOPER CONTROLS LTD
AXDN12DH
MOD LEVEL 6
230V~ 50Hz 5A T45
280703/12345
INPUT 1
-
+V 1
INPUT 2
2 0V +V 1
2 0V
Wiring shown connected to a typical Dali LCM however connection could be
to any point on the Dali Bus
Mechanical Fixing
35mm Deep Single Wall Box
86
Note: Box must be Earthed
1
2
86
3
4
O
Secure Switch Plate through Switch Assembly
to back box using 2 off M3.5 Screws
(Supplied with Plate)
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-DSP7B
Document AID1058 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrols.com
Installation Guide
Spectrum System
Combined Sensor
Mechanical Details
31
49
4
Highest Point nearest to
External Bright Light Source
Mechanical Fixing
1.0 mm Material
40/42 mm
Diameter Mounting Hole
2 to 25.0 mm Material
45mm
Diameter Mounting Hole
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXCS01SRJ Document AID1009 Iss 2
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Emergency Test Light Sensor - Panel Mounted
Mechanical Fixing
100mm
100mm
Lamp/Tube
6mm Maximum
1mm Minimum
Un-usable Area's
8.5mm Diameter Fixing Hole
Luminaire Chassis
Wiring & Termination
Maximum Length 30 Metres
Wire to 0V and Input 2 Terminals
LCM Input Plug
Lighting Control Module (LCM)
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXLS00SH
Document AID1010 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installaion@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Emergency Test Light Sensor - Tube Mounted
Mechanical Fixing
100mm
100mm
Lamp/Tube
6mm Maximum
1mm Minimum
Un-usable Area's
T8 Spring Clip
T5 Spring Clip
T8 Tube
T5 Tube
Light Sensor
Light Sensor
Collared Spacer
(Note Orientation)
Collared Spacer
(Note Orientation)
Wiring & Termination
Maximum Length 30 Metres
Wire to 0V and Input 2 Terminals
LCM Input Plug
Lighting Control Module (LCM)
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXLS58SH
Document AID1011 Iss 2
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Sensor Cable
Wiring
Locking Tab Uppermost
Wire Colour
Connect to Input
Terminal Marked
White
IN1/ON/PD
Red
IN2/OFF/LS
Yellow
0V
Blue
+V
Blue
White
Red
Yellow
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXCA05RJH Document AID1013 Iss 3
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Lamp Current Sensor
Tube
Ballast/Inverter/Battery
Pass Wires from one end of
the Lamp through the coil.
Ensure Maximum
Distance between
Current Sensor &
Other Electronic
Parts of Luminaire
Allow Maximum Spacing
From any potentially
Hot Parts
Outside of Luminaire
Sensor Cable AXCA05RJH
Current
Sensor
Sensor Cable AXCA05RJ
Secure to a suitable interior surface
using a double sided self adhesive pad
or cable tie (Not Supplied)
Ensure Minimum amount of Interface Cable
on the inside of the Luminaire.
Wiring & Termination
Maximum Length 30M
To Current Sensor
White (In1)
Red (In2 or ET)
[See Note]
Blue (+V)
Yellow (0V)
LCM Sensor Input Socket
LCM Input Terminal Block.
(Types may vary)
Terminate to Detail shown
On individual LCM Wiring label.
LCM
Pluggable Interface
P1
AX-ETCS1
Document AID1016 Iss 2
LCM
Wired Interface
NOTE:
The White wire (IN1) is not
required for operation so may
be cut back to the end of the
cable sleeve if no Park terminal
Installation Guide
Spectrum System
Lamp Current Sensor
Sensitivity Set Up
The sensitivity of the lamp current sensor can be set to four different levels by setting the DIL switch accessed on
the side of the unit, setting as below,
ON
Low Sensitivity
1
2
ON
Medium Low Sensitivity
1
2
ON
Medium High Sensitivity
1
2
ON
High Sensitivity
1
2
Note:
The setting is dependant upon the type of fitting it is connected to, the position of the sensor coil and the DIL
switch setting should be set as advised by ALC Lightng Controls.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-ETCS1
Document AID1016 Iss 2
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
External Light Sensor
Mechanical Fixing
79
94
57
32.5
50
65
VIEW WITH LID REMOVED
21
6 Knockouts M16/M20
21
32
30
Remove the transparent Lid and mount the Sensor using the 4 corner fixing holes.
Wiring & Termination
Replace Transparent Lid after Fixing & Wiring
Cable Type: Any 3 Core Mains Rated Flex.
Maximum Length 30 Metres
LCM Input Plug
Light Sensor
Terminal Marking
LCM
Terminal Marking
+V
+V
O/P
IN2/OFF/LS
0V
0V
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-ELS1
Document AID1020 Iss 2
Lighting Control Module (LCM)
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Junction Box
Mechanical Fixing
300
50
250
50
L2
30
L1
110
L
N
160
Knock Out 20mm
3 Positions
Fixing Size Maximum
M6/No.12 4 Positions
25
Input Mains Wiring
Option 2
Option 1
Un-switched Live
Neutral
L2
Switched Live 1 Controls Outputs 1 to 6
Switched Live 2 Controls Outputs 7 to 12
L
N
L1
L2
Note: If Presence Detectors are fitted to Any Output Connector
Switched Live Connections Must Not be made.
P1
AXPL1202
Document AID1027 Iss 1
L1
All Outputs controlled by one switch
Earth
Un-switched Live
Switched Live 1*
Switched Live 2*
N
Neutral
Link
L
Switched Live
Earth
Installation Guide
Spectrum System
Junction Box
Input Control Wiring
Un-switched Live
Permanent Live
L
N
L1
Dimming 0V 1
Dimming Line 1
L
L2
N
Dimming 0V 2
Dimming Line 2
Neutral
Switched Live
Earth
Link*
L1
L2
PD
Switched Live
Earth
Neutral
The Dimming Pair can be connected
To a suitable Rotary Dimmer or Photocell
Note: To control All Outputs Link Dimming
Pair 1 to Dimming Pair 2
Presence Detector with Override Switch OFF facility.
(Controls All Outputs)
* Duplication of this circuit by removal of Link and
addition of a second Presence Detector will give seperate
control of Outputs 1-6 and 7-12.
Output Wiring
N
Grey
L1
N
Black
L1
Output Connector Wiring
Switched Live
Earth
Neutral
Permanent Live
Dimming 0V
Dimming Line
Switched Live
Earth
Neutral
Permanent Live
PD
N
Grey
L1
N
Black
L1
Presence Detector (PD) Connector Wiring
RATINGS MAX.
PER BOX
Grey
TERMINAL COMPARTMENT WIRING
MAINS
L
N
SWITCHED
LIVE
L1
L2
DIMMING
Black
6A
16A
N
LIVE
EARTH
NEUTRAL
AX-PL1202
MOD LEVEL 1
230V~ 50Hz 16A T45
230307/12345
0V 1 0V 2
L1
DIMMING
DIMMING 0V
MAINTAINED LIVE
Emergency Test Output Connector Wiring
L1
OUTPUTS 7 - 12
OUTPUT CONNECTOR WIRING
N
OUTPUTS 1 - 6
Switched Live
Earth
Neutral
Permanent Live
Dimming 0V
Dimming Line
Keyswitch
For Emergency Test Purposes
The Permenant Live feed to
The Emergency Lamp Should
Be Wired Via a Keyswitch
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXPL1202
Document AID1027 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Din Rail Output Lighting Control Module
Mechanical Fixing
Black Tab
White Tabs
Din Rail Fixing
160
90
100
Panel Mounting
Fixing Size (3 Per LCM)
Maximum M3.5/No.6
114
Adaptable Boxes
350
85
30
200
20
140
310
Fixing Size (4 Per Box)
Maximum M4/No.10
P1
AXDN40ATDH
Document AID1034 Iss 3
Installation Guide
Spectrum System
Din Rail Output Lighting Control Module
Wiring
Dimming 0V (See Note)
Dimming Line
Dimming 0V (See Note)
Dimming Line
Dimming 0V (See Note)
Dimming Line
Dimming Pairs
Dimming 0V (See Note)
Dimming Line
Emergency Live Out
Emergency Live In
Live Out
Live In
Live Out
Live In
Relay Output Pairs
Live Out
Live In
Live Out
Live In
LCM
Live
Live
Earth
Earth
Neutral
Neutral
Note:
The dimming 0V is internally connected between each output connector.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXDN40ATDH
Document AID1034 Iss 3
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Low Voltage Current Sensor
Lamp
Supply
Invertor
Connectors
-
Battery
+
+
Terminal Block
Lamp Sensor Coil
Lamp Sensor Coil
Terminal Block
( Cable tie in position to avoid strain on lamp sensor wires)
Maximum Length 30 metres Cable supplied by others)
Run separately to mains cables (wiring is not polarity sensitive)
Input Plug to Spectrum LCM
0V IP2 IP1 +V
0V IP2 IP1 +V
INTRODUCTION
The AX-ETCS2 is intended for use with either 35w or 50w 12v low voltage tungsten halogen emergency luminaires and is designed to
measure the current used to drive the lamp from the battery pack. It will operate on 12v or 6v DC battery packs where current drawn is
between 2A & 5A.
LOCATION
The AX-ETCS2 is intended for mounting within the remote box of the emergency luminaire. It has plugs and sockets to suit most batteries,
but can alternatively be wired into the battery output (+) wire using the terminal block provided.
The temperature of the lamp sensor shall not exceed 75 degreesCentigrade.
The maximum practical length of cable between light sensor and the Lighting Control Module is 30m.
TESTING/FAULTFINDING
Under emergency operation of the lamp, the current sensor read relay will close and give continuity. (This is monitored by the lighting control
module input). Any failure of battery supply or lamp will be read by the system as a fault (during emergency test only).
Check for no continuity by removing the lamp (simulated failure) and powering off the normally unswitched live and switched live mains feed.
Upon replacing lamp, reintroduce mains there should again be no continuity.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-ETCS2
Document AID1035 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
External Solar Interface Unit
Mechanical Fixing
Black Tab
MINUTES
TO ON
TO OFF
APEX LIGHTING CONTROLS
AX-ESI1
MOD LEVEL 1
230V~ 50Hz 8A T45
280703/12345
MAINS
ON
FUSE 8A
20mm HBC
MAINS INPUT
L
L
N
0
1
2
3
4
N
OUTPUT
Lo Li
Li
0
0.5
0.5
0.5
0.5
0
0.5
2.0
5.0
10.0
OUTPUT LED
STATUS LED
POWER LED
ADJUST TO SET
SOLAR LEVEL
SWITCH ON/OFF
SENSOR
+V 0P 0V
White Tabs
Din Rail Fixing
106
MINUTES
TO ON
TO OFF
APEX LIGHTING CONTROLS
AX-ESI1
MOD LEVEL 1
230V~ 50Hz 8A T45
280703/12345
90
MAINS
ON
FUSE 8A
20mm HBC
MAINS INPUT
L
Fixing Size (3 Per LCM)
Maximum M3.5/No.6
L
N
0
1
2
3
4
N
0
0.5
0.5
0.5
0.5
OUTPUT
Lo Li
0
0.5
2.0
5.0
10.0
OUTPUT LED
STATUS LED
POWER LED
ADJUST TO SET
SOLAR LEVEL
SWITCH ON/OFF
100
SENSOR
Li
+V 0P 0V
Panel Mounting
61
Adaptable Boxes
198
25
1 Way MTG22DN1
260
Fixing Size (4 Per Box)
Maximum M4/No.10
310
138
Box Height Including Lid and Lid Screws 90mm
P1
AX-ESIU1
Document AID1036 Iss 1
30
Installation Guide
Spectrum System
External Solar Interface Unit
ADJUST TO SET
SOLAR LEVEL
SWITCH ON/OFF
SENSOR
+V 0P 0V
0V
O/P
Li
Adjust to select time to OFF
Live Feed to Volt Free Output Relay
N
Switched Live Out to Lights
Fused at 8 Amps
N
OUTPUT
+V
L
MAINS INPUT
Wiring to External Solar Sensor
L
FUSE 8A
20mm HBC
MAINS
ON
APEX LIGHTING CONTROLS
AX-ESI1
MOD LEVEL 1
230V~ 50Hz 8A T45
280703/12345
Lo Li
0
0.5
0.5
0.5
0.5
0
0.5
2.0
5.0
10.0
Adjust for Solar Level ON/OFF
0
1
2
3
4
MINUTES
TO ON
TO OFF
OUTPUT LED
STATUS LED
POWER LED
Wiring
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-ESIU1
Document AID1036 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Partition Interface Unit
Mechanical Fixing
200
20
5A
5A
3A
1
2
EM
O/P1
O/P2
EM
13A
LCM TOTAL
5A
OUTPUT 1
5A
OUTPUT 2
EMERGENCY 3A
L
L
N
N
POWER LED
COMMS LED
STATUS LED
0V 1 0V 2
+
-
AXDN22ATDH
MOD LEVEL 5
230V~ 50Hz 13A T45
280703/12345
+V 1
2 0V +V 1
2 0V
350 Including Lid
310
Fixing Size (4 Per Box)
Maximum M4/No.10
140
Box Height Including Lid and Lid Screws 90mm
P1
AX-PIU1
Document AID1038 Iss 3
30
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-PIU1
Document AID1038 Iss 3
0V IN2 IN1 +V
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
0V IN2 IN1 +V
LCM 1
0V IN2 IN1 +V
Mains Relay
Coil
0V IN2 IN1 +V
11 7 12 8
0V IN2 IN1 +V
0V IN2 IN1 +V
LCM 2
0V IN2 IN1 +V
Partition Switch
Bound In Software To
Control Both O/P1 & O/P2
0V IN2 IN1 +V
Scene
Switch
Plate 2
+
1
2
3
4
Off
-
Wiring
Scene
Switch
Plate 1
+
1
2
3
4
Off
-
9 5 10 6
Contacts
Spectrum System
Contacts
Diagram showing linkage of two 4 button and 0ff scene
switch plates together, utilising a partion switch
(NB: With partition switch open each scene switch plate
operates the lighting in its individual room.
With the partition switch closed either scene switch plate
operates the lighting in the combined room).
Installation Guide
Partition Interface Unit
www.coopercontrol.com
Installation Guide
Spectrum System
Spine Bus Extension Socket
52.0
16.5
14.0
15.0
20.0
58.0
Fixing: 2 Number 20mm Long No.8 Screws Included
Wiring
Spine Bus Connection From Area Controller
Screen
GREEN
Screen
YELLOW
+
RED
+
BLACK
BLUE
P1
AX-SBE1
Document AID1037 Iss 1
WHITE
Installation Guide
Spectrum System
Spine Bus Extension Socket
Typical Application
The Spine Bus extenders are typically mounted in the Riser cupboard for the floors
that are connected to an Area Controller sited on a different floor.
These provide a connection point for the set up of the lighting on each seperate floor.
Spine Bus
Extender
SECOND FLOOR
Field Bus 3
Area
Controller
Field Bus 2
Field Bus 1
FIRST FLOOR
Spine Bus
Extender
GROUND FLOOR
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-SBE1
Document AID1037 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Sensor Extension Socket
Mechanical Fixing
52.0
16.5
14.0
15.0
20.0
58.0
Fixing: 2 Number 20mm Long No.8 Screws Included
Wiring
Connection To/From Next Terminal Box
(Provided Continuity is Maintained Wire Colour is not Important)
+V
PD
GREEN
P1
AX-PDE1
0V
RED
YELLOW
BLACK
0v Connection
BLUE
PD Connection
WHITE
+V Connection
Document AID1039 Iss 1
Installation Guide
Spectrum System
Sensor Extension Socket
Typical Application
Junction
Box
3 core 7/0.2 or Similar
Sensor
Second Floor
Junction
Box
Sensor
First Floor
Junction
Box
Sensor
Hard Wired
Lighting Control Module
Ground Floor
Stairwell
0V
Connection to
Hard Wired LCM
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-PDE1
Document AID1039 Iss 1
IN1/ON/PD
+V
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Input Connector Wiring
0V
IN2/OFF/LS
IN1/ON/PD
2 WAY AND OFF
RETRACTIVE SWITCHES
3 CORES REQUIRED
0V
IN2/OFF/LS
LATCHING SWITCH
MOMENTARY SWITCH
PULL CORD
2 CORES REQUIRED
0V
PRESENCE DETECTOR
IN1/ON/PD
+V
3 CORES REQUIRED
0V
IN2/OFF/LS
IN1/ON/PD
+V
PRESENCE DETECTOR
WITH LIGHT SENSOR
4 CORES REQUIRED
YELLOW
WHITE
BLACK
RED
GREEN
YELLOW
BLUE
RED
0V
IN2/OFF/LS
IN1/ON/PD
+15V
WHITE
BLUE
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
Document AID1040 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Gear Tray Lighting Control Module
Mechanical Fixing
250
PROGRAM
SOCKET
STATUS LED
IN2-2
33
48
+V
IN1-2
Fixing Centres
0V
2
1
IN2-1
0V
IN1-1
SCN
+
Fixing Size Maximum M4/No.8
235
37
36
261
Wiring
Output Wiring
Earth
Earth
Live In
Live In
L
Neutral
Neutral
Live Out 1
Live Out 2
N
L
N
OUTPUT 1
OUTPUT 2
Input Wiring
For Switches requiring 2 wires connect between 0V & Off
For Switches requiring 3 wires connect between 0V,On & Off
STATUS LED
IN2-2
+V
IN1-2
0V
2
1
IN2-1
0V
AXGT22ATDH
2
IN1-1
SCN
+
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
Back Row terminals
Document AID1041 Iss 1
1
In2/Off/LS
+V
In2/Off/LS
Dim 0V
Dimming 2
Dimming 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
Front Row Terminals
2
In1/On/PD
1
0V
In1/On/PD
Bus Screen
Bus Bus +
www.coopercontrol.com
Installation Guide
Spectrum System
Single Output Dali Lighting Control Module
Mechanical Fixing
270
252
9
OUTPUT
WIELAND WS.032.6666.1N
N
N
MAINS
INPUT
DALI +
DALI LIVE 2
NEUTRAL
EARTH
LIVE 1
1
L
L
2
RATINGS MAX.
LIVE 1
5A
LIVE 2
5A
DALI
5A
57
92
FUSES 5A HBC
s
-
BUS
INPUT
AXPL10DH
MOD LEVEL 1
230V~ 50Hz 5A T45
280703/12345
+
23
Fixing Size
Maximum M8 (No.14)
230
51
26
20
Input Mains and Communications Wiring
Mains
Earth
Neutral
RATINGS MAX.
LIVE 1
5A
LIVE 2
5A
DALI
5A
Live
Screen
Bus Bus +
AXPL10DH
MOD LEVEL 1
230V~ 50Hz 5A T45
280703/12345
Communications Bus
L1
N
Order Code: AX-OPGST18
Alternative: Wieland 34.362.0211.1
N
L1
Output Connector Wiring
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXPL10DH
Document AID1044 Iss 1
Permenant Live 1
Earth
Neutral
Permenant Live 2
Dimming 0V
Dimming Line
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
RS232 Interface Module
Mechanical Fixing
Black Tab
4
3 2 1 24V 5V 5V 0V 0V
O/P
SUPPLY
OPEN DRAIN
PIN2 TX
PIN3 RX
PIN5 0V
0V RX TX
RS232
AXDN42RS232
MOD LEVEL 1
290110/12345
MAINS ON
MAINS INPUT
L
L
N
BUS
N
s
+ -
INPUT 1
+V
1
2
INPUT 2
0V +V
1
2
0V
White Tabs
Din Rail Fixing
106
4
PIN2 TX
PIN3 RX
PIN5 0V
0V RX TX
3 2 1 24V 5V 5V 0V 0V
O/P
SUPPLY
OPEN DRAIN
RS232
AXDN42RS232
MOD LEVEL 1
100
90
290110/12345
MAINS ON
MAINS INPUT
L
L
N
N
BUS
s
INPUT 1
+ -
+V
1
2
INPUT 2
0V +V
1
2
0V
Panel Mounting
Fixing Size (3 Per LCM)
Maximum M3.5/No.6
61
Adaptable Boxes
198
25
1 Way MTG22DN1
260
310
Fixing Size (4 Per Box)
Maximum M4/No.10
138
30
Box Height Including Lid and Lid Screws 90mm
P1
AXDN42RS232
Document AID1046 Iss 1
Installation Guide
Spectrum System
RS232 Interface Module
Wiring
AXDN42RS232
MOD LEVEL 1
290110/12345
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AXDN42RS232
Document AID1046 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
LED Current Sensor
Mechanical Fixing
-
-
+
+
LED Display
LED Driver
Ensure Maximum
Distance between
Current Sensor &
Other Electronic
Parts of Luminaire
Allow Maximum Spacing
From any potentially
Hot Parts
Outside of Luminaire
1
2
ON
Sensor Cable AXCA05RJH
1
2
ON
1
2
ON
1
2
ON
Sensor Cable AXCA05RJ
Secure to a suitable interior surface
using a double sided self adhesive pad
or cable tie (Not Supplied)
Ensure Minimum amount of Interface Cable
on the inside of the Luminaire.
Wiring & Termination
Maximum Length 30M
To Current Sensor
White (IN1/ON/PD)
Red (IN2/OFF/LS or ET)
[See Note]
Blue (+V)
Yellow (0V)
LCM Sensor Input Socket
LCM Input Terminal Block.
(Types may vary)
Terminate to Detail shown
On individual LCM Wiring label.
LCM
LCM
Pluggable Interface
Wired Interface
Lighting Control Modules (LCM)
P1
AX-ETDS1
Document AID1048 Iss 1
NOTE:
The White wire (IN1) is not
required for operation so may
be cut back to the end of the
cable sleeve if no Park terminal
is available.
Installation Guide
Spectrum System
LED Current Sensor
Sensitivity Set Up
The sensitivity of the LED current sensor can be set to four different levels by setting the DIL switch accessed on
the side of the unit, setting as below,
ON
Low Sensitivity
1
2
ON
Medium Low Sensitivity
1
2
ON
Medium High Sensitivity
1
2
ON
High Sensitivity
1
2
Note:
The setting is dependant upon the type of fitting it is connected to, the position of the sensor coil and the DIL
switch setting should be set as advised by ALC Lightng Controls.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
AX-ETDS1
Document AID1048 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
Dali Sensor
Mechanical Details
31
49
4
Highest Point nearest to
External Bright Light Source
Mechanical Fixing
1.0 mm Material
40/42 mm
2 to 25 mm
Material
45 mm
Diameter Mounting Hole
Diameter Mounting Hole
Wiring
Wiring shown connected to a typical Dali LCM however connection could be
to any point on the Dali Bus
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AXDS01SPL Document AID1049 Iss 1
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum Solo
Infra Red Programmer
This document outlines the steps to be taken to configure both the Lighting Control Module and the ceiling
mounted Sensors. This setup should only be undertaken once the sytem components are in place and
correctly wired and this document assumes that to be the case.
For details of system specification, wiring and installation see documents ALT1040, ALT1042 and AID1002.
Whilst not essential, the preffered method of set up is the Sensor first followed by the Lighting Control Module.
The Sensor used for Solar Control must be connected to Input Eight, Sensors used for Presence or Absense
Detection can be fitted to any Input Five to Eight.
Inputs one, two and three are for the connection of local 2 way and Off retractive override switches that control
each individual group e.g Input 1 controls Output Group 1etc.
Typical Output Grouping
230Vac
Lighting
Control
Module
1
Group 1
2
5
9
8
INPUTS
6 7 8
Group 3
7
3
I/P 1 I/P 2 I/P 3 I/P 4
4
5
6
Sensor
(Default Position)
Group 2
The configuration transmitter referred to in the text is a hand held unit that can transmit various functions to the
Sensors connected to Input Five to Eight of a Lighting Control Module, it is a Safety Extra Low Voltage Device
that can be handled without the need for specialised safety precautions.
Infrared Transmitter
(Shown Opened ready for use)
Infra Red Transmitter LED Status LED
(Flashes to show message being sent)
Transmit Switch
Switch 6
Mode Selector Switch
Switch 2
Transmit Switch
Switch 4
P1
Document ALT1045 Iss 2
Installation Guide
Spectrum Solo
Infra Red Programmer
SENSOR CONFIGURATION
The LCM attempts to maintain the light level by varying the 'solar enabled' outputs, calibratation of the light level
sensor should be carried out using the following procedure.
1.
Firstly set the sensor to operatate in Spectrum mode (Mode 3). To do this set the DIL
switches on the configuration transmitter to the following diagram:
Whilst pointing the transmitter towards the sensor press and hold SW4 for 10 seconds, the
sensor should acknowledge the command by flashing 3 times every 2 seconds for 20
seconds.
NOTE: if the sensor LED illuminates continuously the Sensor is locked. To unlock the
sensor set all the DIL switches to OFF (see diagram)and within 30 seconds after Sensor
power up push and hold SW6 for 10 seconds whilst pointing the transmitter at the sensor.
The sensor should rapidly flash to acknowledge that the unlock code has been received.
After unlocking the sensor return back to the beginning of item 1.
1 2
3 4
1 2
3 4
2.
Using the wall switches adjust each of the output groups to achieve the desired lighting level. Adjusting the
levels will temporary suspend any solar control therefore allowing the light sensor to be accurately setup.
3.
Ensure sensor is set to operate in Spectrum mode as described at item 1, Press and hold
SW6 on the configuration transmitter for 10 seconds whilst pointing it towards the sensor.
The sensor LED will flash with equal ON/OFF time (this indicates that the sensor is autocalibrating), during this process stand well away from the sensor to minimise the affect of
reflected light on the sensor. Once sensor calibration is complete the sensor LED will stop
flashing (this process can take up to 3 minutes).
4.
OPTIONAL. To lock the sensor and prevent any unintentional alterations, set all the DIL
switches to OFF (see diagram) press and hold SW6 for 10 seconds whilst pointing the
transmitting LED towards the sensor. The sensor LED should illuminate continuously for
about 5 seconds and then flash its current mode (i.e. mode 3) a couple of times.
1 2
3 4
1 2
3 4
NOTE: For best results light sensor calibration should be at night with blinds shut in a fully furnished room.
Lighting Control Module (LCM) CONFIGURATION
1.
On the configuration transmitter, set all 4 DIL switches ON (see diagram) and then press
and hold SW4 for 10 seconds whilst pointing the transmitting LED towards the sensor. T h e
outputs should flash to acknowledge that the LCM has entered the configuration mode and
the COMMS LED on the LCM should be flashing once a second. After the outputs have
flashed they should all remain on. In this state, output groups at 100% brightness are solar
controlled, whilst output groups dimmed to 10% are not.
1 2
3 4
NOTE: If the outputs don't flash and the Lighting Control Module COMMS LED is continuously lit, the LCM is
locked, the configuration mode can then only be accessed within 5 minutes after power-up.
2.
3.
To select which output groups are to be solar enabled or disabled
select the desired group by means of the DIL switches in the
Configuration Transmitter, (see diagrams) pressing either SW4 to
enable or SW6 to disable solar control for that group. The output
groups will change between 10% (disabled) and 100% (enabled).
1 2
3 4
Group 1
1 2
3 4
Group 2
For movement detection mode set DIL switches as shown, press SW4 for presence and
SW6 for absence mode, the outputs will flash to acknowledge this command. At this point
the LCM is operating in Presence/Absense test mode and the functionality can be checked.
1 2
3 4
Group 3
1 2
3 4
1 2
3 4
NOTE: In absence mode the user will have to press the wall switches to bring the lights on
once the 10 second time out has occured. The COMMS LED on the LCM should be flashing
twice a second in this mode.
4.
Set the DIL (see diagram) press SW4 to exit the LCM configuration mode or SW6 to exit and
lock the LCM. The LCM will then restart, if locked the configuration mode can only be
accessed within 5 minutes of power-up and the COMMS LED will be continuously on.
Cooper Controls Ltd
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P2
Document ALT1045 Iss 2
Tel:
+44 (0)1923 495495
Fax: +44 (0)1923 228796
Email: installation@coopercontrols.co.uk
www.coopercontrol.com
Installation Guide
Spectrum System
5 Button Scene Setting Switch
Wiring
+V
In1/On/PD
Lighting Control Module
Input 1
In2/Off/LS
0V
+V
In1/On/PD
0V
OFF
4
3
2
1
Lighting Control Module
Input 2
In2/Off/LS
0V
+V
In1/On/PD
Lighting Control Module
Input 3
In2/Off/LS
0V
+V
In1/On/PD
View On Rear of Switch Assembly
Lighting Control Module
Input 4
In2/Off/LS
0V
The Comm and OFF connection can be taken to
any of the LCM Inputs.
Mechanical Fixing
35mm Deep Single Wall Box
86
1
2
3
4
O
Secure Switch Plate through Switch Assembly
to back box using 2 off M3.5 Screws
(Supplied In Packing Box)
ALC Lighting Controls
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-SP5B-IL
Document AID1054 Iss 1
Tel:
+44 (0)1923 495630
www.alclightingcontrols.co.uk
Fax: +44 (0)1923 228796
Email: info@alclightingcontrols.co.uk
86
Installation Guide
Spectrum System
7 Button Scene Setting Switch
+V
In1/On/PD
Wiring
Lighting Control Module
Input 1
In2/Off/LS
0V
LCM 2
LCM 1
UP
DOWN
0V
OFF
4
3
2
1
+V
In1/On/PD
Lighting Control Module
Input 1
In2/Off/LS
0V
+V
In1/On/PD
Lighting Control Module
Input 2
In2/Off/LS
0V
+V
In1/On/PD
Lighting Control Module
Input 3
In2/Off/LS
0V
View On Rear of Switch Assembly
The Comm and OFF connection can be taken to
any Input associated with an ON connection.
+V
In1/On/PD
Lighting Control Module
Input 4
In2/Off/LS
0V
Mechanical Fixing
35mm Deep Single Wall Box
86
86
Secure Switch Plate through Switch Assembly
to back box using 2 off M3.5 Screws
(Supplied In Packing Box)
ALC Lighting Controls
20 Greenhill Crescent, Watford Business Park,
Watford, Herts, WD18 8JA, UK.
P1
AX-SP7B-IL
Document AID1055 Iss 1
Tel:
+44 (0)1923 495630
www.alclightingcontrols.co.uk
Fax: +44 (0)1923 228796
Email: info@alclightingcontrols.co.uk