DKK Pricelist ex moms 2015
K-Tek® KLASSIC™ "GRAPHITE" BOOM POLES
Model
Length
Sections
Weight
Description
K81CC
2' – 6'9"
(61cm - 206cm)
5
1.280lbs
(581g)
DKK ex moms
K81 + CC Internal coiled cable bottom exit
3.935,-
K81CCR
2'3" - 7'2"
(69cm - 218cm)
5
1.746lbs
K81 + CCR Internal coiled cable side exit
4.160,-
K102
2'3" – 8'5"
(69cm - 256cm)
5
1.009lbs
(458g)
K102 Uncabled
3.373,-
K102CC
2'3" – 8'5"
(69cm - 256cm)
5
1.292lbs
(586g)
K102 + CC Internal coiled cable bottom exit
4.422,-
K102CCR
2'7" – 8'8"
(79cm - 256cm)
5
1.542lbs
(699g)
K102 + CCR Internal coiled cable side exit
4.647,-
K152
3'2" – 12'7"
(96cm - 383cm)
5
1.344lbs
(610g)
K152 Uncabled
4.422,-
K152CC
3' – 12'7"
(91cm - 383cm)
5
1.649lbs
(748g)
K152 + CC Internal coiled cable bottom exit
5.472,-
K152CCR
3'5" – 12'9"
(104cm - 389cm)
5
1.887lbs
(856g)
K152 + CCR Internal coiled cable side exit
5.697,-
K202
3'10" – 16'8"
(117cm - 508cm)
5
1.673lbs
(759g)
K202 Uncabled
5.172,-
K202CC
3'10" - 16'8"
(117cm - 508cm)
5
1.836lbs
(833g)
K202 + CC Internal coiled cable bottom exit
6.296,-
K202CCR
4'3" – 17'
(129cm - 518cm)
5
2.086lbs
(946g)
K202 + CCR Internal coiled cable side exit
6.596,-
K251
4'7" - 20'9"
(140cm - 632cm)
5
2.138lbs
(970g)
K251 Uncabled
5.959,-
K251FT
5'4" – 21'
(163cm - 640cm)
5
2.409lbs
(1092cm)
K251 + FT Factory wired with internal straight cable
7.083,-
K-Tek® 6-SECTION "TRAVELER" KLASSIC POLES, Graphite
Model
Sections
Weight
Description
DKK ex moms
K87
1'10" – 7'3"
(55cm - 221cm)
Length
6
1.09lbs
(494g)
K87 Uncabled
2.736,-
K87CCR
2'2" – 7'5"
(66cm - 226cm)
6
1.6lbs
(726g)
K87 + CCR Internal coiled cable side exit
3.935,-
K123
2'6" – 10'3"
(76cm - 331cm)
6
1.28lbs
(581g)
K123 Uncabled
4.235,-
K123CCR
2'9" – 10'5"
(84cm - 317cm)
6
1.82lbs
(826g)
K123 + CCR Internal coiled cable side exit
5.509,-
K230
4' - 19' 2"
(122cm - 585cm)
6
2.5lbs
(1134g)
K230 Uncabled
5.097,-
K230CCR
4' 2" - 19' 4"
(128cm - 591cm)
6
2.9lbs
(1315g)
K230 + CCR Internal coiled cable side exit.
6.146,-
K230KTA2
4' 2" - 19' 4"
(128cm - 591cm)
6
2.8lbs
(1270g)
K230KTA2 + KTA2 Transmitter Adapter Side Mount with
Internal coiled cable.
6.296,-
K225
DISCONTINUED
DISCONTINUED
K225CCR
● Also available in STEREO models
K-Tek® 5-SECTION KLASSIC STAGE POLES with QUICK CONNECT, Graphite
Model
Length
Sections
Weight
Description
KS153
3'5" - 12'9"
(104cm - 389cm)
5
1.465lbs
(832g)
KS153 Uncabled
DKK ex moms
4.422,-
KS153CCR
3'8" – 12'9"
(112cm - 389cm)
5
2.027lbs
(920g)
KS153 + CCR Internal coiled cable side exit
5.697,-
KS246
4'11" - 20'5"
(150cm - 622cm)
5
2.12lbs
(962g)
KS246 Uncabled
5.922,-
KS246FT
5'2" – 20'5"
(158cm - 622cm)
5
2.24lbs
(1016g)
KS246 + FT Factory wired with internal straight cable
7.046,-
K-Tek® ARTICULATED BOOM POLES, Graphite
Model
Length
Sections
Weight
Description
KA113
2'2" – 9'5"
(66cm - 287cm)
6
1.776lbs
(806g)
DKK ex moms
KA113 Uncabled
5.284,-
KA113CCR
2'5" – 9'5"
(74cm - 287cm)
6
2.303lbs
(1045g)
KA113 + CCR Internal coiled cable side exit
6.559,-
K-Tek® KLASSIC POLE ACCESSORIES
Model
Description
KTA2
Transmitter Adapter Side Mount - Machined aluminum side mount outfitted with an XLR connector.
KCC
Base unit with XLR male for internal coil cable
637,-
KCCR
Base unit with Right Angle XLR for internal coil cable
862,-
KFT
Flow Through Base for internal straight cable
487,-
KFTS
“Stubby” Flow Through Base
487,-
KCK81
Cable Kit for the K81 Klassic Pole
637,-
KCK102
Cable Kit for the K102 Klassic Pole
637,-
KCK152
Cable Kit for the K152 Klassic Pole
637,-
KCK202
Cable Kit for the K-202 Klassic Pole
637,-
DKK ex moms
1.012,-
● Cable Kits are available for all pole models.
● STEREO models available where applicable / call for pricing.
K-Tek® AVALON® "GRAPHITE"
Model
Length
Sections
KEG54
1'10" - 4’6”
(56cm - 137cm)
Weight
Description
3
KEG88CC*
1'11"-7'4"
(58cm - 234cm)
6
1.214lbs
(551g)
KEG88 + CC Internal coiled cable bottom exit
2.886,-
KEG100
2'4" – 8' 4"
(71cm - 254cm)
5
15.28oz
(433g)
KEG100 Uncabled
3.073,-
KEG100CC
2'4" – 8'4"
(71cm - 254cm)
5
1.262lbs
(572g)
KEG100 + CC Internal coiled cable bottom exit
3.673,-
KEG100CCR
2'6" – 8'6"
(76cm - 259cm)
5
1.362lbs
(601g)
KEG100 + CCR Internal coiled cable side exit
3.860,-
KEG150
3' – 12'5"
(91cm - 378cm)
5
1.328lbs
(602g)
KEG150 Uncabled
3.860,-
KEG150CC
3' – 12'5"
(91cm - 378cm)
5
1.635lbs
(742g)
KEG150 + CC Internal coiled cable bottom exit
4.460,-
KEG150CCR
3'3" – 12'7"
(99cm - 383cm)
5
1.699lbs
(771g)
KEG150 + CCR Internal coiled cable side exit
4.647,-
0.5lbs (227g) KEG54 Uncabled
DKK ex moms
1.574,-
● 6-Section Traveler
K-Tek® AVALON® "ALUMINUM"
Model
Sections
Weight
KE60
2’10” - 5’
(86cm - 152cm)
Length
2
0.69lb
(312g)
Description
DKK ex moms
KE60 Uncabled
750,-
KE69
2'4" – 5'9"
(71cm - 175cm)
3
0.79
(356g)
KE69 Uncabled
974,-
KE69CC
2'4" – 5'9"
(71cm - 175cm)
3
1.051lbs
(477g)
KE69 + CC Internal coiled cable bottom exit
1.199,-
KE79*
1'8" – 6'6"
(51cm - 198cm)
6
1.237lbs
(561g)
KE79 Uncabled
1.574,-
KE79CC*
1'8" – 6'6"
(51cm - 198cm)
6
1.452lbs
(659g)
KE79 + CC Internal coiled cable bottom exit
1.836,-
KE79CCR*
1'8" – 6'8"
(51cm - 203cm)
6
1.45lbs
(658g)
KE79 + CCR Internal coiled cable side exit
2.024,-
KE89
2'5"-7'6"
(74cm - 218cm)
4
1.110lbs
(503g)
KE89 Uncabled
1.237,-
KE89CC
2'5"– 7'6"
(74cm - 218cm)
4
1.375lbs
(624g)
KE89 + CC Internal coiled cable bottom exit
1.417,-
KE110
2'7" – 9'2"
(79cm - 279cm)
5
1.458lbs
(661g)
KE110 Uncabled
1.574,-
KE110CC
2'7” – 9'2"
(79cm - 279cm)
5
1.723lbs
(781g)
KE110 + CC Internal coiled cable bottom exit
1.874,-
KE110CCR
2'7” – 9'4"
(79cm - 284cm)
5
1.813lbs
(822g)
KE110 + CCR Internal coiled cable side exit
2.024,-
KE144
3'3" – 12'
(99cm - 366cm)
5
1.900lbs
(862g)
KE144 Uncabled
1.761,-
KE144CC
3'3" – 12'
(99cm - 366cm)
5
1.900lbs
(862g)
KE144 + CC Internal coiled cable bottom exit
2.024,-
KE144CCR
3'3" – 12'2"
(99cm - 371cm)
5
2.24lbs
(1016g)
KE144 + CCR Internal coiled cable side exit
2.211,-
Note:
● All cabled poles come standard in a 3-pin XLR mono configuration.
● A 5-pin XLR stereo cable is also available.
● All K-Tek poles can be specially ordered with a foam grip.
K-Tek® MICROPHONE SUSPENSION MOUNTS
K-Tek® NAUTILUS
Model
Description
KNS3
Nautilus Shock Mount
525,-
KSP25
Pair of Lower Tension Spiral, GREY
150,-
KSP35
Pair of Hight Tension Spiral. BLACK
150,-
DKK ex moms
K-Tek® SHOCK MOUNTS
Model
Description
KGPS
Microphone Suspension; very versatile high tech suspension, using KSUS Suspenders that are spaced 3 1/5"
(9 cm). Weight: 220 lbs (99 g)
1.162,-
KGPSS
Short version of the KGPS high tech suspension; the Suspenders are spaced 2" (5 cm). Weight: 195 lbs (88
g)
1.162,-
KSUS
Pair Microphone Suspenders TM
150,-
KSM
Microphone Shock Mount: The microphone is held firmly in two polymer mounts spaced 2" (5 cm) apart. The
mounts stretch to accommodate most shotgun mics.
974,-
KSSM
Microphone Shock Mount for short microphones: The microphone is held firmly in two polymer mounts spaced
1 3/8" (35 mm) apart. The mounts stretch to accommodate most shotgun mics.
974,-
KSMS
Microphone Shock Mount: The microphone is held firmly in two soft polymer mounts spaced 2" (5 cm) apart.
The mounts stretch to accommodate most shotgun mics.
974,-
KSSMS
Microphone Shock Mount for short microphones: The microphone is held firmly in two soft polymer mounts
spaced 1 3/8" (35 mm) apart. The mounts stretch to accommodate most shotgun mics.
974,-
KS40
Pair of NORMAL Rubber Mounts for SM/SSM
150,-
KS30
Pair of SOFT Rubber Mounts for SM/SSM
150,-
KMT
KMOUNT 4-Point universal shock mount, using KSUS Suspenders
600,-
KMTS
KMOUNT SHORT 4-Point universal shock mount short version, using KSUS Suspenders
600,-
DKK ex moms
K-Tek® WINDSCREENS
K-Tek® ZEPPLIN®
Model
Description
KZEPPS
Basket/Casing–length 11 1/4” (for microphones like the Sanken CS-1)
2.811,-
KZEPPM
Basket/Casing–length 13” (for microphones like the AT4073A)
2.961,-
KZEPPL
Basket /Casing–length 16” (for microphones like the Sennheiser ME66)
3.186,-
KZEPPXL
Basket/Casing–length 19” (for microphones like the Sennheiser ME67)
3.373,-
DKK ex moms
K-Tek® SLIP-ON FUZZY
Model
Description
Size / Microphone
DKK ex moms
ZFSOT
Fuzzy Slip-on Windscreen
Tiny - Interior length 3" (8cm)
ZFSOXS
Fuzzy Slip-on Windscreen
XS - Interior length 3.5" (9cm)
600,-
ZFSOS
Fuzzy Slip-on Windscreen
S - Interior length 5" (13cm)
600,-
ZFSOM
Fuzzy Slip-on Windscreen
M - Interior length 6" (15cm)
600,-
ZFSOL
Fuzzy Slip-on Windscreen
L - Interior length 7.5" (19cm)
600,-
ZFSOXL
Fuzzy Slip-on Windscreen
XL - Interior length 10" (25cm)
600,-
KFZAT897
Fuzzy Slip-on Windscreen
Fits Audio Technica AT897 (M)
600,-
KFZBP4073
Fuzzy Slip-on Windscreen
Fits Audio Technica 4073 (M)
600,-
KFZ4017
Fuzzy Slip-on Windscreen
Fits DPA 4017 (S)
600,-
KFZKMR81
Fuzzy Slip-on Windscreen
Fits Neumann KMR81 (M)
600,-
KFZNTG1
Fuzzy Slip-on Windscreen
Fits Rode NTG-1 (S)
600,-
KFZNTG2
Fuzzy Slip-on Windscreen
Fits Rode NTG-2 (M)
600,-
KFZNTG3
Fuzzy Slip-on Windscreen
Fits Rode NTG-3 (L)
600,-
KFZCS1
Fuzzy Slip-on Windscreen
Fits Sanken CS-1 (S)
600,-
KFZCS2
Fuzzy Slip-on Windscreen
Fits Sanken CS2 (M)
600,-
KFZCS3E
Fuzzy Slip-on Windscreen
Fits Sanken CS3e (M)
600,-
KFZCMC
Fuzzy Slip-on Windscreen
Fits Schoeps CMC Series (T)
600,-
KFZCMIT5
Fuzzy Slip-on Windscreen
Fits Schoeps CMIT-5U (M)
600,-
KFZ416
Fuzzy Slip-on Windscreen
Fits Sennheiser 416 (M)
600,-
KFZME66
Fuzzy Slip-on Windscreen
Fits Sennheiser ME66 (L)
600,-
KFZME64
Fuzzy Slip-on Windscreen
Fits Sennheiser ME64 (S)
600,-
KFZMKH50
Fuzzy Slip-on Windscreen
Fits Sennheiser MKH50 (S)
600,-
KFZMKH60
Fuzzy Slip-on Windscreen
Fits Sennheiser MKH60 (L)
600,-
KFX8060
Fuzzy Slip-on Windscreen
Fits Sennheiser MKH8060 (S)
600,-
600,-
K-Tek® FUR WINDSOCKS
● To fit over existing foam microphone covers.
Model
Description
DKK ex moms
KR5070
Ball type, hand microphones
300,-
KR50180
Fits Rode video mic
300,-
KRME200
Windsock 8" shotgun mic's. ME66, KMR81, NTG-2etc..
300,-
K-Tek® TOPPERS™
for HANDHELD MICS & SPECIALTY MICS & HANDHELD RECORDERS
Model
Description
KTZOOM
Topper - for ZOOM H4N
DKK ex moms
300,-
KTZ2
Topper - ZOOMH2N - black short hair fur windscreen.
300,-
KTH1
Topper - for ZOOM H1N
225,-
KTDR100
Topper - Tascam DR-100
300,-
KTCUB01
Topper - Fuzzy Topper windscreen for the Sanken CUB-01. Codename "Mouse"
225,-
KTDR40
Topper windscreen for TASCAM DR-40
225,-
ZOOMH5
Topper for Zoom H5
300,-
ZOOMH6XY
Topper for Zoom H6 XY Capsule
300,-
ZOOMH6MS
Topper for Zoom H6 MS Capsule
300,-
K-Tek® TOPPERS™ FOR LAVALIER MICS
Model
Description
KTFUZ
Fuzzy windscreen with elastic loop for lavaliere microphones - Black. Good for the following lavs: COS-11,
B6, B3, Sennheiser MKE series. Codename "Fuzzball"
150,-
KLTFB
Fuzzy shower cap style lav windscreens -Black
150,-
KLTFW
Fuzzy shower cap style lav windscreens -White
150,-
KLTFT
Fuzzy shower cap style lav windscreens -Tan
150,-
KLTFG
Fuzzy shower cap style lav windscreens -Grey
150,-
KTMM
Pair of fleece mini windscreends for Sanken COS-11s lavalier microphone-Grey.
112,-
K-Tek® AUDIO ACCESSORIES
HAND GRIPS/CABLES/ANTENNA MOUNTS
DKK ex moms
Model
Description
KBC
The boom cradle supports a boom pole and attaches to a grip stand knuckle with a stainless steel spud.
KHG
Hand Grip: It is simply A foam covered graphite tube with a K-Tek pole head and a threaded base. Weighs
only 2.7 ounces.
300,-
KHGW
Hand Grip Wired: The K-HGW is wired with soft cloth covered cable for maximum noise isolation.
600,-
K4NN
Approximately 4 inches of coiled cable. Neutrik Male and Female XLR connectors.
300,-
K4NK
Approximately 4 inches of coiled cable. Neutrik Male and K-TEK Right Angle Female XLR connectors.
300,-
K6NN
K6NK
K18NN
K18NK
K36NN
K36NK
KAMT
Approximately 6 inches of coiled cable which will stretch to approximately 4ft. Neutrik Male and Female XLR
connectors
Approximately 6 inches of coiled cable which will stretch to approximately 4ft.Neutrik Male and K-TEK Right
Angle Female XLR connectors.
Approximately 1.5 ft of coiled cable which will stretch to approximately 9 ft. Neutrik Male and Female XLR
connecters.
Approximately 1.5 ft of coil+B338ed cable which will stretch to approximately 9 ft. Neutrik Male and K-Tek
Right Angle Female XLR connecters.
Approximately 3 ft of coiled cable which will stretch to approximately 18 ft. Neutrik Male and Female XLR
connecters.
Approximately 3 ft of coiled cable which will stretch to approximately 18 ft. Neutrik Male and Right Angle
Female XLR connecters.
"T" SHARK: 4' aluminum tubing with center bracket
0.75 lb
4'
attachment to 3/8 x 16. It comes standard with 2
(340g)
mounting rings (KAMR), a cold shoe to a 5/8 x 27 thread
(122cm)
and end caps.
"L" SHARK: 3' aluminum tubing with bracket on one side
to 3/8 x 16. it comes standard with 2 mounting rings
(KAMR), a cold shoe to a 5/8 x 27 thread and end caps.
0.70 lb
(318g)
3'
(91cm)
KAML
KAMR
DKK ex moms
MOUNTING RING: Each mounting ring has two 3/8 x 16 threaded studs situated 180 degrees from each
other for use on K-Tek Antenna Mounts. (KAMT, KAML)
1.124,-
300,300,375,375,450,487,-
1.724,-
1.724,-
375,-
K-Tek® CAMERA FRAMES (CAGE)
Model
Description
KN2285
NORBERT SPORT: FOR HDSLR CAMERAS. Machined aluminum top and bottom mounting plates with 2
Graphite, foam covered side handles for easy handling. The side handles have adjustable height using KTek's proprietary collar / collet system. The top bar offers nine shoe mounts and multiple 1/4 x 20 and 3/8 x
16 threaded holes. Comes standard with quick release and top handle. Can also be used with Iris Rod
Clamp System to work with traditional 15mm rail systems. (KN2278)
1.949,-
KN2287
NORBERT FILMMAKER KIT: Machined aluminum base frame with adjustable height-extension side plates,
19 standard dimension shoe mounts and numerous 1/4x20 and 3/8x16 threaded holes, quick release and 2
locking handgrips. Features an Iris Rod Clamp system which allows the Norbert frame to interface with
traditional 15mm rail systems. Includes a pair of 8" Graphite iris rods. (order Dovetail Plates KN3235 for most
DSLRs and KN3237 for the Canon 7D)
3.710,-
KN2289
NORBERT SPORT JR: FOR ACTION CAMERAS. Accessory frame - Ideal for use with small video cameras
such as the GoPro, GoPro 3D, small video cameras, tiny camera and communication devices. Machined
Aluminum top and bottom mounting plates with 2 Graphite, foam covered side handles for easy handling. The
top bar offers nine shoe mounts and multiple 1/4x20 and 3/8x16 threaded holes. (Quick release and top
handle KN2269 not included.)
1.139,-
KN2269
NORBERT TOP HANDLE
DKK ex moms
315,-
K-Tek® KLASSIC CAMERA POLES
Model
Length
Sections
Weight
Description
KCAM72
2' - 6'
(61cm - 183cm)
5
1.08lbs
(494g)
The most compact of the Klassic camera poles •Comes
with the K-CAMCH articulating camera head and thread
adaptor from 3/8 x 16" to 1/4 x 20"
DKK ex moms
3.261,-
KCAM99
2'7" - 8'2"
(78cm - 251cm)
5
1.28lbs
(616g)
Good practical reach•Comes with the K-CAMCH
articulating camera head and thread adaptor from 3/8 x
16" to 1/4 x 20"
3.523,-
KCAM152
3'4" - 12'6"
(104cm - 386cm)
5
1.62lbs
(726g)
Longest available length•Comes with the K-CAMCH
articulating camera head and thread adaptor from 3/8 x
16" to 1/4 x 20"
4.610,-
IRIS RODS
Model
Description
KN9
9" IRIS RODS: Pair of Graphite 15MM diameter 9" iris rods
● Also available in 18" and 24"
DKK ex moms
300,-
K-Tek® CAMERA SHOE ACCESSORIES
Model
Description
KBRG
SHOE BRIDGE: A 6.5" machined aluminum shoe bridge that sits 4" over the camera and can offset
accessories to one side. The cold shoe is made of industrial Delrin.
360,-
KBRGS
SHOE BRIDGE SHORT: A 4" machined aluminum shoe bridge that sits 4" over the camera and can offset
accessories to one side. The cold shoe is made of industrial Delrin.
360,-
KOSE
OFFSET SHOE EXTENDER repositions the camera shoe 2.6" vertically and 2.24" left or right of the camera.
225,-
KSA
KSSA
SHOE ADAPTER: Adapts a camera shoe to 3/8x16 threaded studs.
SHOE STEP ADAPTER repositions camera shoe 2" above camera.
150,225,-
KSPT
SHOE PLATE provides a flat surface for mounting accessories including audio transmitter receivers and
recorders to a camera shoe.
300,-
KTBAR
TBAR: Aluminum 6" shoe bar on a Delrin shoe facilitates mounting multiple accessories on a camera shoe.
225,-
KTBAR9
TBAR: Aluminum 9" shoe bar on a Delrin shoe facilitates mounting multiple accessories on a camera shoe.
225,-
KCAMCH
Thread adapter (3/8 x 16 - 1/4 x 20) ARTICULATING CAMERA HEAD
450,-
KCAMSM
K-Tek shock mount: Ideal for upgrading microphones on a camera shoe (fits most standard shotgun
microphones.)
600,-
KCAMSSM
K-Tek short shock mount: Ideal for upgrading microphones on a camera shoe (fits most short standard
shotgun microphones).
600,-
www.pss.dk
DKK ex moms
mail@pss.dk
0045
329 729 00