TMF
Low Wattage LED Flood
Product Information
Project Name
Type
Catalog Number
Date
SPECIFICATIONS
Features
• Higher quality lighting over the incandescent, HID or HPS
fixtures traditionally used in flood applications.
• Up to 97% less electricity, compared to traditional fixtures the
TMF saves energy while providing similar light levels.
• Wet location fixture is IP65 & IP66 rated.
• Tempered glass lens resists breakage and reduces replacement and maintenance costs.
• Instant re-start, no warm-up times or reduced light output in cold environments.
• Die cast aluminum body designed for maximum heat dissipation.
• Steel mounting hardware.
• L70 (70% lumen maintenance) at 50,000 hours reduces life cycle maintenance costs.
• Up to 72 lumens per watt.
• Color Rendering Index (CRI) > 70.
Construction
•
•
•
•
•
•
•
•
Die cast aluminum body
Thermal heat sink
Liquid tight cord grip
Standard tempered glass lens
Optional polycarbonate lens or horizontal flood linear refractor
Standard steel yoke mount
Additional mounting hardware available
Weight: 8 lbs.
Certifications
• UL listed for U.S. & Canada. Tested to UL 1598 & UL 8750 standards.
• Luminaires bear appropriate listing labels.
• Please refer to the Lighting Facts website for specific product
qualifications at www.lightingfacts.com.
Electrical
•
•
•
•
•
•
•
•
Application
Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max)
Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max)
Active Power Factor Correction
Power Factor: >0.90 @ full load, 100V through 277V
Inrush Current: <15 Amps max @ 230 VAC, cold start 25ºC
Harmonic Distortion: THD < 20% @ full load
Protection: Over-Voltage, Over-Current & Short Circuit with self-recovery
Compliant to FCC Part 15 requirements for EMI/RFI emissions
• Wet locations standard.
• Target applications include:
• Flood
• Flagpoles
• Signage
• Staging
• Statue
• Accent
• Security
Warranty
• Five-year warranty. (Terms and Conditions Apply)
CERTIFICATION
IP65
IP66
CERTIFIED
CERTIFIED
ORDERING INFORMATION
–
–
MODEL
TMF Low
Wattage
LED
Flood
–
OPTICS
SP 12° Spot
(Standard)
DSP 32° Diffused
INPUT WATTS
14W 14 Watt (12
Chip, 350mA)
16W 16 Watt (6
Chip, 700mA)
21W 21 Watt (18
Chip, 350mA)
21W 21 Watt (12
Chip, 520mA)
Flood
SECONDARY
OPTICS
TG Clear Tempered
Glass Lens (STD)
CP Clear
Polycarbonate
Lens
FOOTNOTES
EXAMPLE TMF-21W-DSP-TG-50K-18C-UL-350-YC-BB
–
–
–
–
COLOR
TEMP
DRIVER
VOLTAGE
50K 5000
UL Universal
QTY OF
LED CHIPS
6C 6 Chip
Board
12C 12 Chip
Board
18C 18 Chip
Board
120-277
VAC
DRIVER
CURRENT
350 350 mA
Across Chip
520 520 mA
Across Chip1
700 700 mA
Across Chip2
–
–
–
MOUNTING
YM Yoke Mount
Only w/18" Cord
YC Yoke Mount
w/ WCA
Cover Plate
Assembly
FIXTURE
FINISH
BB
BW
BZ
RAL
Black
White
Bronze
RALxxxx (RAL
Specification)
OTHER ACCESSORIES*
AJ
BX
WCA
GS
PA
TS
34NA
Architectural Junction Box
Brass In-Grade Junction Box
2 Piece Wall/Ceiling Adaptor
Ground Stake
Cast Post Top Adaptor
Tree Strap
3/4" Watertight NPT Adaptor
1. Available only with 21W 12C.
2. Available only with 16W 6C.
* Ordered Separately.
Page 1/3 - Revised: 05/26/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
TMF
Low Wattage LED Flood
PHOTOMETRIC DATA
PHOTOMETRIC DATA: TMF-14W-SP-50K-12C-UL-350
All published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP certified lab.
LUMINAIRE DATA
INDOOR CANDELA PLOT
ZONAL LUMEN SUMMARY
90
TMF-14W-SP-50K-12C-UL-350
LED25W-036-C0700
1.00
LED
861
14
Suspended
N/A
N/A
Length: 0.46
Width: 0.56
Height: 0.42
RCR
81
87
96
100
13
AVG. LUMINANCE (Candela/Sq. M.)
50
10
70
10
0.19
0.09
0.02
0.96
0.92
0.89
0.86
0.84
0.82
0.82
0.8
%Fixt
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
60
20
30
40
0.0 _____ 40.0 _ _ _ _ 90.0 _ _ _ _
80
%Lamp
699
752
829
861
110
70
COEFFICIENTS OF UTILIZATION (%)
RC
Lumens
0-20
0-30
0-40
0-60
0-80
0-90
80
0
RW 70
50
30
0 1.191 0.191 0.191
1 1.151 0.131 0.111
2
1.11 0.071 0.041
3 1.071 0.03 0.99
4
1.04 0.99 0.95
5
1.02
0.96 0.92
6
0.99
0.93 0.89
7
0.96
0.9
0.86
8
0.95 0.88 0.83
9
0.95 0.88 0.84
10 0.92 0.86 0.83
Zone
70
50
30
1.161 0.161 0.161
1.131 0.111 0.091
1.091 0.061 0.031
1.061 0.01 0.98
1.03
0.98 0.95
1
0.95
0.91
0.98
0.92 0.88
0.96
0.9
0.86
0.94 0.87 0.84
0.94 0.87 0.84
0.95 0.86 0.82
50
10
0.16
0.07
0.01
0.96
0.92
0.88
0.86
0.83
0.81
0.81
0.8
50
30
1.111 0.111
1.071 0.051
1.021
0
0.99 0.96
0.96 0.96
0.93
0.9
0.91 0.88
0.89 0.85
0.87 0.83
0.87 0.83
0.85 0.82
0
10
0.11
0.04
0.98
0.94
0.91
0.88
0.85
0.83
0.81
0.81
0.79
LUMINANCE
Average Luminance Angle
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in feet
Test: 25906
Test Date: 08/31/09
0
1
0.96
0.93
0.9
0.88
0.85
0.83
0.81
0.8
0.8
0.78
0
30
40
45
50
55
60
65
70
75
80
85
1345524
16078
10061
9298
9092
8649
8040
6475
5504
3803
2032
0
RCR = Room Cavity Ratio RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
* The above coefficients have been calculated based on luminaire lumens because in an
absolute test the bare lamp lumens are unknown. Lighting design calculations made using
these coefficients should therefore use the luminance lumens in the calculation formula.
OPERATING ENVIRONMENT
Proposed
System
Min
Temp
Max
Temp
45°C
TMF-14W
-30°C
TMF-16W
-30°C
45°C
TMF-21W
-30°C
45°C
Application Notes
1. Application temperatures are provided to ensure the
longevity and performance of the driver and LEDs.
2. Results are based off the In-Situ Temperature Measurement Test
(ISTMT) along with the drivers' temperature and life curves.
3. Precision-Paragon [P2]'s 5 year warranty assumes operation
at the maximum ambient temperature range.
LUMEN PACKAGE OPTIONS
Proposed
System
CRI
CCT
Lumens
Per Fixture
Input
Watts
Lumens
Per Watt
TMF-SP-6C-16W
TMF-SP-12C-14W
TMF-SP-12C-21W
TMF-SP-18C-21W
>70
>70
>70
>70
5000K
5000K
5000K
5000K
1163
861
1506
1374
16
14
21
21
83
54
72
65
*Lumen values shown are initial delivered lumens tested at 25°C per IES LM-79 standards.
Page 2/3 - Revised: 05/26/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
TMF
Low Wattage LED Flood
FIXTURE DIMENSIONS
Wall & Ceiling Adapter
4 13/16"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
2 3/4"
3 5/8"
3 5/8"
4 1/2"
4 1/2"
20 5/8"
4 1/2"
Cast Post-top Adaptor
9/16"
3"
Architectural Junction Box
Brass (in-grade)
9"
13/16"
Architectural Junction Box
Brass
(in-grade)
Junction
Box
Fits
Ø2 hex
3/8" to Ø3 1/2" tenons
12' Tree Strap
4 1/2"
1 1/4"
12' Tree Strap
1 1/4" hex
Junction Box4 1/2"
(3) 1/2" NPT openings
Architectural Junction Box
Cast Post-top
Brass
(in-grade)
3" Adaptor
1/2" NPT thread
Ground
(3)
1/2" 1NPT
openings
(2 side,
top)
1/2" Stake
NPT thread
Junction Box
(2 side, 1 top)
NPT Adapter
Tree Strap (TS)
NPT Adapter
Tree Strap (TS)
(3) 1/2" NPT openings
12' Tree Strap
4 1/2"
9"
1 1/4" hex
(2 side, 1 top)
1 3/4"
1 3/4"
9/16"
6"
Ground
5 1/16" Stake
3"
9"
Architectural Junction Box
1 3/4"
Cast Post-top Adaptor
4 1/2"
4 1/2"
TS - TREE STRAP
Ordered Separately
2
(3) 1/2" NPT openings
(2 side, 1 top)
9/16"
3"
3" Ø2 3/8" to Ø3 1/2" tenons Fits Ø2 3/8" to Ø3 1/2" tenons
2 13/16"
Fits
12' Tree Strap
Brass
12'(in-grade)
Tree Strap
Junction Box
1/2" NPT thread
3 11/16"Tree Strap (TS)
Architectural
Junction Box
1 3/4"
Fits Ø2 3/8"5 to
Ø3
1/2"
tenons
1/16"
Fits Ø2 3/8" to Ø3 1/2" tenons
Cast Post-top Adaptor
Cast Post-top Adaptor
Visor
Visor
4 1/2"
4 1/2"
NPT Adapter
Brass (in-grade)
Junction Box 4 1/16"
Fits Ø2 3/8" to 3
Ø3
1/2" tenons
11/16"
Cast Post-top Adaptor
4 1/16"
1 1/4" hex
1 3/4"
*Contact the Service Hub for additional mounting options.
4 1/2"
4 1/16"
(3) 1/2" NPT openings
(2 side, 1 top)
1 1/4" hex5 1/16"
1/2" NPT thread
1/2" NPT thread
NPT Adapter
NPT Adapter
(3) 1/2" NPT openings
Tree Strap (TS)
(2 side, 1 top)
Tree Strap (TS)
3 11/16"
4 1/2"
1 9/16"
(3)
1/2" NPT openings
1 3/4"
(2 side, 1 top)
12' Tree Strap
Tree Strap (TS)
4 1/2"
20 5/8"
Ground Stake
1/2"Ground
NPT Stake
opening
Ø7/8" hole
5 11/16"
5 11/16" 20 5/8"
20 5/8"
(3) 1/2" NPT openings
(2 side, 1 top)
9"
9"
(3) Ø5/16"
holes
9/16"
9/16"
20 5/8"
2 3/4"
9"
(3) Ø5/16" 9"
9/16"
(3) Ø5/16"
holes
(3) Ø5/16"
2 13/16"
holes
holes
1 9/16"
1/2" NPT
Architectural
Brass (in-grade)
1 9/16"Stake
(3) Junction
Ø5/16" Box
Architectural
Junction Box
3"
Brass (in-grade)
opening
Ground
1/2"
NPT
Ground Stake
holes
Junction Box
1 9/16"
opening
Junction Box
1/2"
NPT
9"
1 9/16"
& Ceiling Adapter
Ø7/8"Wall
hole
NPT
openings
opening(3) 1/2" NPT1/2"
(3) 1/2" NPT Ø7/8"
openings
hole
Wall & Ceiling Adapter
opening
(2 side, 1 top)
(2 side, 1 top)
GS - GROUND STAKE
PA - CAST
POSTBox
TOP ADAPTER
Architectural
Junction
Brass (in-grade)
Yoke Mount Ground
(YM) Stake
Wall & Ceiling
Adapter
Ordered Separately
Separately
Mount (YM)
Wall & CeilingOrdered
Adapter
Junction Box
1 3/4"
1/4"
2020
5/8"
5/8"
3 5/8"
2 3/4"
2 3/4"
5 11/16"
Yoke Mount (YM)
Top
Yoke Mount (YM)
7 5/16"
2 13/16"
6"
2 13/16"
7 5/16"
6"
1/4"
5 11/16"
5 11/16"
5 9/16"
WCA - 2 PIECE WALL/CEILING
ADAPTER
(3) 1/2" NPT openings
1/2" 1NPT
openings
Ordered Separately(3)
(2 side,
top)
Yoke
(2 side, 1 top)
1 1/2"
5 9/16"
1 9/16"
1 9/16" 1/2" NPT
1/2"
NPT
Ø7/8"
hole
opening
Ø7/8" hole
opening
Side
Top
Side
Top
Ø5/16"Adapter
Yoke Mount (YM)
Wall(3)
& Ceiling
Yoke Mount (YM)
Wall & Ceiling Adapter
holes IN-GRADE JUNCTION BOX
AJ - ARCHITECTURAL JUNCTION BOX
BX - BRASS
1Ordered
1/2"Separately
Front
Side 7 5/16"
Ordered Separately Top
1 9/16"
6"
1/2" NPT
(3)
1/2"
NPT
openings
(3) 1/2" NPT openings
Ø7/8" hole
opening
(2 side, 1 top)
(2 side, 1 top)
7 5/16"
6"
7 5/16"
Yoke Mount
9/16" Wall & Ceiling Adapter
9/16"(YM)
6"
2 13/16"
2 13/16"
7 5/16"
1 1/2"
5 11/16"
(3) 1/2" NPT openings
6"
3"
(2 side, 1 top)
3"
3 5/8"
3 5/8"
1 1/2"
1 1/2"
Ø7/8" hole
Ø7/8" hole
Side
4 13/16"
5 11/16"
11/16"
4 13/16"
4513/16"
(3) Ø5/16"
holes
Top
1 1/2"
(3) Ø5/16"
holes
5 11/16"
Top
7 5/16"
6"
5 9/16"
Side
1/4"
1/4"
4 13/16"
5 11/16"
5 11/16"
5 11/16"
Side
1/4"
5 9/16"
1 71/2"
5/16"
6"
Top
1/4"
YM - YOKE MOUNT
Optional
Front
5 9/16"
1/4"
1 1/2"5 11/16"
5 9/16"
5 9/16"
6 1/4"
MOUNTING OPTIONS & ACCESSORIES
Front
Front
Side
Top
1/4"
Front
Front
Side
3 5/8"
5 9/16"
5 9/16"
5 11/16"
6 1/4"
6 1/4"
5 9/16"
3 5/8"
4 13/16"
Front
5 9/16"
6 1/4"
3 5/8"
4 13/16"
4 13/16"
5 9/16"
6 1/4"
" NPT openings
1 top)
4"
5 9/16"
5 9/16"
ount (YM)
ke
5 9/16"
651/4"
9/16"
6 1/4"
4 1/2"
Visor
1 1/4" hex
1/2" NPT thread
NPT Adapter
3 11/16"
3 11/16"
Page 3/3 - Revised: 05/26/16 | Created: 2016
5 1/16"
1/16"
© 2016 Precision-Paragon
[P2], a division of Hubbell Lighting, Inc. Because of4continuing
product improvement
programs, Precision-Paragon [P2] reserves
5 1/16"
3 11/16"
4 1/16"
Fits Ø2 3/8" to Ø3 1/2" tenons
Ø2 3/8"
to Ø3 1/2" tenons
the right to change
specifications without notice. Telephone [Midwest] 715.381.2971 /Fits
Website
www.P-2.com
Cast Post-top Adaptor
Visor
Visor
5 1/16"
Cast Post-top Adaptor
4 1/16"