C-700 Sec.A mech.Final
9/14/05
10:32 AM
Page 18
MEDIUM BI-PIN TURN-TYPE
LAMPHOLDERS
Disconnect • G13 Base
LINEAR FLUORESCENT
Disconnect/Circuit-Interrupting
Fluorescent Lampholders for
T-8 and T-12 Lamps
• Meets UL 1570 requirements for disconnect/circuit-interrupting lampholders in fixtures rated
at 300V or greater
• Available in low-profile and tall-profile versions
13351-00D
Turn-type, medium bi-pin lampholders for disconnect/circuit-interrupting applications. Knife-edge
contacts. Body is molded, white thermosetting urea. Quickwire pressure terminals accept
stranded No. 18 AWG twisted and overtinned, or No. 18 AWG solid or solder-dipped leads,
stripped 3/8". Recessed wire well completely encloses conductor, insulating against shorts. The
recessed wire well on one side of the lampholder is labeled “L-DISC-B” to clearly identify line and
ballast disconnect terminals. The back of each lampholder is stamped “D” for easy identification
as a disconnect device.
Cat. No. 13351-00D Low Profile & 13354-00D Tall Profile
0.34 (8.6)
0.88 (22.4)
1.68 (42.7)
1.00 (25.4)
0.72 (18.3)
0.19 (4.8)
0.38 (9.7)
13354-00D
0.055 (1.40)
(FOR #18 GA. PANEL)
0.052 (1.32)
1.17 (29.7)
0.043 (1.09)
(FOR #20 GA. PANEL)
0.040 (1.02)
• 660W-600V • UL Listed E-5833 • CSA Certified LR-1863 • NOM Certified 057
1.02 (25.8)
SUGGESTED OPENING IN SOCKET PLATE.
THIS IS ONLY A RECOMMENDATION
AS SOCKET WILL FUNCTION
OVER A WIDER RANGE.
1.02 (25.8)
1.00 (25.4)
1.25 (31.8)
Cat. No. 13351-00D
0.19 (4.8)
0.38 (9.7)
0.72 (18.3)
0.055 (1.40)
(FOR #18 GA. PANEL)
0.052 (1.32)
1.17 (29.7)
2.04 (51.8)
1.00 (25.4)
0.043 (1.09)
(FOR #20 GA. PANEL)
0.040 (1.02)
1.17 (29.7)
0.38 (9.7)
1.02 (25.8)
SUGGESTED OPENING IN SOCKET PLATE.
THIS IS ONLY A RECOMMENDATION
AS SOCKET WILL FUNCTION
OVER A WIDER RANGE.
1.02 (25.8)
1.00 (25.4)
1.25 (31.8)
Cat. No. 13354-00D
A 18
To learn more about Leviton’s outstanding offering of devices, visit our Website at: www.leviton.com ....Building A Connected World