Standard AC Motors
C-21
Overview,
Product
Series
Constant
Speed
Motors
Standard AC Motors
Three-Phase
Induction Motors
Constant Speed Motors
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
Three-Phase Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
Page
C-22
C-30
K S Series [60 W (1/12 HP, 100 W (1/8 HP)] ·········· C-32
World K Series [6 W∼90 W (1/125 HP∼1/8 HP)] ···· C-58
BH Series [200 W (1/4 HP)] ····································· C-96
2-Pole, High-Speed Type [60 W∼150 W (1/12 HP∼1/5 HP)] ··· C-109
Features and Types of Three-Phase Induction Motors ····
General Specifications ············································
C-21
C-22 Three-Phase Induction Motors
Features and Types of Three-Phase Induction Motors
Induction
Motors
Electromagnetic
Brake Motors
High-Efficiency
K S Series
60 W
(1/12 HP)
100 W
(1/8 HP)
■Features of Three-Phase Induction
Motors
●Optimal for Uni-Directional and Continuous Operation
Induction motors are optimal for uni-directional and continuous
operation such as a conveyor system.
●Speed Control Operation
Combined use of an inverter with a three-phase motor enables
speed control operation.
●Extensive Product Line
The K S Series, World K Series and BH Series are available.
We have motors with an output power range of 6 W (1/125 HP) to
200 W (1/4 HP) to meet your specific application.
●Compatible with Various Gearheads
Combination with a gearhead allows the motor speed to be reduced
to the required speed or generate higher torque.
■Types of Three-Phase Induction Motors
Series
Induction
Motors
Features, Lineup
●High Efficiency Three-Phase Motors
through Optimal Design
K S Series
6W
(1/125 HP)
A review of the basic motor design has yielded
unprecedented high efficiency and energy savings.
15 W
(1/150 HP)
●Best Characteristics with Inverter
Combination
World K Series
60 W
(1/12 HP)
●Conforms to Safety Standards
Output Power
Voltage
Frame Size
● Applicable Standards
Output Power
UL/CSA Standards
Certified under the China Compulsory Certification
System✽ (CCC System)
CE Marking (Low Voltage Directive)
BH Series
200 W
(1/4 HP)
Voltage
□60 mm (□2.36 in.)∼□90 mm (□3.54 in.)
Lead Wire Type: 6 W∼40 W (1/125 HP∼1/19 HP)
Terminal Box Type: 25 W∼40 W (1/30 HP∼1/19 HP)
Conduit Box Type: 25 W∼90 W (1/30 HP∼1/8 HP)
2-Pole, High-Speed Type: 60 W∼150 W (1/12 HP∼1/5 HP)
Three-Phase 220/230 VAC
✽ Except Conduit Box Type
✽
● Motor Overheat Protection Device
Thermal protector, Impedance protected
✽ Except Conduit Box Type
BH Series
●Smallest Frame Size among 200 W (1/4 HP)
Motors
These motors achieve a high output of 200 W (1/4 HP) with
a frame size of 104 mm (4.09 in.).
●Hypoid Gear Right Angle Type is Available
●"Combination Type" for Easy Installation
●Tapped Hole at the Shaft End
The gearhead shaft features a tapped hole for convenient
connection with loads.
●Product Line
Frame Size
Output Power
With each combination type, the motor and gearhead come
pre-assembled for easy installation.
●Conforms to Safety Standards and Global
Voltage Specifications
Type
Voltage
C-22
□90 mm (□3.54 in.)
Right-Angle Geared: 100 W (1/8 HP)
Parallel Shaft Combination: 60 W (1/12 HP),
100 W (1/8 HP)
Round Shaft: 60 W (1/12 HP), 100 W (1/8 HP)
Three-Phase 220/230 VAC
●Product Line
All World K Series motors have an overheat protection
device built-in and conform to major safety standards.
90 W
(1/8 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Frame Size
Speed can be controlled over a wide range, and high
torque is exerted even at low speeds. Because it is a highperformance motor with little speed reduction even with a
large load, stabilized speed control is possible.
25 W
(1/30 HP)
40 W
(1/19 HP)
●Product Line
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
□104 mm (□4.09 in.)
200 W (1/4 HP)
Terminal Box Type:
Right-Angle, Hollow Shaft Type,
Right-Angle, Solid Shaft Type,
Parallel Shaft Type, Round Shaft Type
Cable Type:
Right-Angle, Hollow Shaft Type,
Right-Angle, Solid Shaft Type,
Parallel Shaft Type, Round Shaft Type
Three-Phase 220/230 VAC
Standard AC Motors
C-23
■Features of the K S Series
High Efficiency Three-Phase Motors through Optimal Design
●High Efficiency at a Maximum of 73%
●High Performance
Specialized components and an optimal magnetic design are
used to make high efficiency three-phase motors with a maximum
efficiency of 73%. Motors are fanless with increased motor torque.
Characteristics have been improved through pursuit of the
specifications required for the three-phase motor and a review of
the design to create a high-performance motor with little speed
reduction even with a large load.
● Changes in Speed according to Load
Optimized Configuration of
Steel Plate
Specialized Three-Phase
Motor Design
Low Loss Magnetic
Steel Sheet
Constant
Speed
Motors
Three-Phase
Induction
Motors
K S Series
Conventional Product
Load Torque[N·m]
Overview,
Product
Series
Single-Phase
Induction
Motors
Rated Torque
Reversible
Motors
Speed
Increased Winding
Space Factor
100 W (1/8 HP)✽
(60 Hz)
K S Series
70%
73.9%
Conventional Product
65.7%
66.7%
1500
1800
Electromagnetic
Brake Motors
●Increased Motor Output Power
Output power of 100 W (1/8 HP) in a 90 mm (3.54 in.) frame size is
achieved through increased efficiency. An overall length
15 mm (0.59 in.) shorter than the conventional motor contributes to
equipment downsizing.
● Comparison of Maximum Efficiency (Reference values)
60 W (1/12 HP)
(60 Hz)
[r/min]
15 mm (0.59 in.)
K S Series
Output Power
100 W (1/8 HP)
✽Conventional product values are for 90 W (1/8 HP)
Mass
−0.3 kg
(−0.66 lb.)
●Power Consumption Reduced by up to 10%
Compared to a conventional 90 W (1/8 HP) motor under the same
conditions, power consumption is reduced by a maximum of about
10%, contributing to the equipment's energy savings.
Loss Reduced Power Consumption
Reduced
by about 31%
by about 10%
150
Input [W]
100
45
31
Loss
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Conventional Product
Output Power
90 W (1/8 HP)
Right-Angle
Gearheads
●Fanless
With reduced loss, there is less heat generation in the motor, so the
cooling fan that was incorporated into the conventional
60 W (1/12 HP) min. products is no longer included.
K S Series
Linear
Heads
Conventional Product
Brake Pack
50
90
90
Output Power
Accessories
0
Conventional Product K S Series 100 W (1/8 HP)
90 W (1/8 HP)
when outputting 90 W (1/8 HP)
Cooling Fan
●No Dust, etc.
Installation
With no cooling fan, dust is not blown around.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-23
C-24 Three-Phase Induction Motors
Best Characteristics Achieved when Combined with an Inverter
●Wide Range of Speeds
Speed can be controlled over a wide range using an inverter, from 3∼120 Hz✽. Also, with improved characteristics, high torque can be exerted
even at low speeds.
Induction
Motors
✽80 Hz with a right-angle shaft
Conventional Product
Permissible Torque
High-Efficiency
K S Series
100
50
0
60 W
(1/12 HP)
0
500
1000
1500
2000
2500
3000 3500 4000
Speed [r/min]
Speed Ratio 12:1
200
2400
Even with a Load There is
Little Speed Reduction
100 W (1/8 HP) Round Shaft Type
100
50
0
0
500
1000
1500 2000 2500
Speed [r/min]
Speed Ratio 40:1
3000
3500
4000
3600 (120 Hz)✽
●Handles High-Speed Rotation (Round shaft type)
Because it is a high-performance motor with little speed reduction
Induction even with a large load, stabilized speed control is possible.
6W
(1/125 HP)
Continuous Operation Range
90 (3 Hz)
●Improved Speed Stability
Motors
100 W (1/8 HP) Round Shaft Type
Permissible Torque
Rated Torque [%]
Rated Torque [%]
Electromagnetic
Brake Motors
100 W
(1/8 HP)
K S Series
Continuous Operation Range
Creep-free bearings, etc. are used in the round shaft type, and
components capable of handling high-speed rotation have been
selected and designed for inverter control.
Continuous Operation Range
Speed at max. Permissible Torque
25 W
(1/30 HP)
Speed with No Load
Rated Torque [%]
15 W
(1/150 HP)
100
Permissible Torque
50
0
0
500
1000
1500
40 W
(1/19 HP)
2000 2500
Speed [r/min]
3000
3500
4000
Uses Creep-Free Bearings
(Round shaft type only)
Slim Body Terminal Box (Terminal box type)
60 W
(1/12 HP)
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
●Equipped with an Easy-to-Wire Slim Body Terminal Box
●IP66-Compliant Drip-Proof Specification
This new shape of terminal box is designed to make wiring the
terminal block easier.
It has a slim body, with a cable outlet that can be rotated in 90˚
increments for 4 possible directions.
The seal structure for the motor, gearhead and terminal box
components has been strengthened. The terminal box type✽ is
compliant with the IP66 degree of protection.
40 mm✽
(1.57 in.)
✽ The round shaft type is 46 mm (1.81 in.).
C-24
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
✽Excluding installation surface of round shaft type
IP66:
The IP indication that shows the watertight and dust-resistant performance are specified under IEC
60529 and IEC 60034-5.
Main Specifications
● Material
Case and terminal box: Aluminum
Output shaft: S45C
Screws: Stainless steel (externally facing screws only)
● Surface Treatment
Case and terminal box: Painted (excluding installation surface)
Standard AC Motors
C-25
High-Strength Gearhead
Uses a gearhead that excels in both torque and strength.
Right-Angle Geared Type
●Internal Gearhead Structure
80
Rated Torque [N·m (lb-in)]
Permissible Radial Load
Uses Hypoid Gears
Permissible Axial Load
50
Permissible Radial Load 1700 N (380 lb.)
The seal structure is strengthened.
This contributes to increased equipment reliability.
(10 mm (0.39 in.) from the end of the output shaft)
Constant
Speed
Motors
Rated Torque
3.5 Times Higher
40
30
20
(177)
10
0
Oil Seal
Overview,
Product
Series
K S Series
70
(610)
60
Oriental Motor
Conventional Product
0
50
100
Expanded High
Gear Ratio Lineup
150
200
250
Gear Ratio
K S Series Rated Torque 70 N∙m (610 lb-in)
Conventional Product 5GE-RA Rated Torque 20 N∙m (177 lb-in)
Permissible Axial Load 350 N (78 lb.)
●Internal Gearhead Structure
Oil Seal
Permissible Torque [N·m (lb-in)]
Parallel Shaft Combination Type
Permissible Radial Load
Carburized Shaft and Gears
Permissible Axial Load
Permissible Radial Load 500 N (112 lb.)
Large-diameter
Bearing
Side Panel
(10 mm (0.39 in.) from the end of the output shaft)
Permissible Axial Load 150 N (33 lb.)
Rated Torque
Doubled
30
20
(177)
Electromagnetic
Brake Motors
Oriental Motor Conventional Product
Clutch &
Brake Motors
10
0
Single-Phase
Induction
Motors
Reversible
Motors
K S Series
40
(350)
Three-Phase
Induction
Motors
0
50
100
150
200
Gear Ratio
K S Series Permissible Torque 40 N∙m (350 lb-in)
Conventional Product 5GE-S Permissible Torque 20 N∙m (177 lb-in)
Low-Speed
Synchronous
Motors
Torque
Motors
Benefits of Using the Right-Angle Geared Type
●Connect the Drive Shaft Directly to a Hollow Shaft Geared Type to Reduce Costs
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Conveyor drive rollers can
be installed on both ends of
●Component cost reduction through reduction of fastening parts ●Assembly steps reduced through
mechanism simplification ●Reduced maintenance, such as belt tension adjustment ●Space saving
Brake Pack
the load shaft of a hollow shaft type.
The equipment can be made even smaller
compared to when the motor is installed on the
Accessories
side of the conveyor.
●Motor Mounted Perpendicularly to Load to Save Space
Installation
Reduced by
81 mm (3.19 in.)
200 mm
(7.87 in.)
World K Series
90 W (1/8 HP) with Parallel Shaft
Gearhead
119 mm
(4.69 in.)
K S Series
100 W (1/8 HP) Right-Angle, Hollow
Shaft Type
Because the output shaft of the gear is vertically in
the middle of the installation surface, it is possible
to change the installation direction horizontally.
Installation to suit the application can be selected.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-25
C-26 Three-Phase Induction Motors
■System Configuration
●Right-Angle Geared Type
K S Series
Induction
Motors
Electromagnetic
Brake Motors
AC Power Supply
(Main power supply)
High-Efficiency
K S Series
60 W
(1/12 HP)
100 W
(1/8 HP)
Accessories (Sold separately)
Induction
Motors
6W
(1/125 HP)
15 W
(1/150 HP)
25 W
(1/30 HP)
40 W
(1/19 HP)
60 W
(1/12 HP)
90 W
(1/8 HP)
Flexible Couplings
➜ Page C-201
Torque Arms
➜ Page C-200
Solid shaft type only
Hollow shaft type only
CR Circuit for Surge Suppression
➜ Page C-208
●Example of System Configuration
Sold Separately
CR Circuit for Surge
Torque Arm
Suppression
SOT5A
EPCR1201-2
$23.00
$5.00
Induction Motor
5IK100VES-GHR25
$317.00
● The system configuration shown above is an example. Other combinations are also available.
●Parallel Shaft Combination Type
K S Series
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
AC Power Supply
(Main power supply)
Accessories (Sold separately)
Flexible Couplings
➜ Page C-201
Mounting Brackets
➜ Page C-196
●Example of System Configuration
Sold Separately
Induction Motor
Mounting Bracket
Flexible Coupling
SOL5UBF
$29.00
MCL5518F12
$97.00
5IK60VEST2-25A
$261.00
CR Circuit for Surge
Suppression
EPCR1201-2
$5.00
● The system configuration shown above is an example. Other combinations are also available.
C-26
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
CR Circuit for Surge Suppression
➜ Page C-208
Standard AC Motors
C-27
■Product Line of Three-Phase Induction Motors
●Induction Motors
Motor Frame Size, Output Power
Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm
(□2.36 in.) (□2.76 in.) (□3.15 in.)
6W
(1/125 HP)
15 W
(1/50 HP)
25 W
(1/30 HP)
□90 mm
(□3.54 in.)
40 W
(1/19 HP)
60 W
(1/12 HP)
90 W
(1/8 HP)
□104 mm
(□4.09 in.)
100 W
(1/8 HP)
Three-Phase
220/230
Terminal Box Type
Lead Wire
K S Series
Parallel Shaft Combination Type
Round Shaft Type
Three-Phase
220/230
Terminal Box Type
●
●
Lead Wire
●
●
World K Series
Three-Phase
220/230
2-Pole, High-Speed Type
Three-Phase
220/230
Three-Phase
220/230
BH Series
200 W
(1/4 HP)
●
●
K S Series
Right-Angle Geared Type
Terminal Box
Conduit Box
Lead Wire
Terminal Box
Lead Wire
Terminal Box
Cable
150 W
(1/5 HP)
●
●
●
●
●
●
●
●
●
●
●
●
Overview,
Product
Series
Constant
Speed
Motors
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
●
●
●
●
●Electromagnetic Brake Type Motor
Reversible
Motors
Electromagnetic
Brake Motors
Motor Frame Size, Output Power
Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm
(□2.36 in.) (□2.76 in.) (□3.15 in.)
6W
(1/125 HP)
15 W
(1/50 HP)
25 W
(1/30 HP)
□90 mm
(□3.54 in.)
40 W
(1/19 HP)
60 W
(1/12 HP)
90 W
(1/8 HP)
□104 mm
(□4.09 in.)
100 W
(1/8 HP)
200 W
(1/4 HP)
●
●
K S Series
Right-Angle Geared Type
Three-Phase
220/230
Terminal Box Type
Cables
K S Series
Parallel Shaft Combination Type
Round Shaft Type
Three-Phase
220/230
Terminal Box Type
●
●
Cables
●
●
World K Series
Three-Phase
220/230
Lead Wire
BH Series
Three-Phase
220/230
Terminal Box Type
●
●
●
●
●
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
●
●
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-27
C-28 Three-Phase Induction Motors
■Shaft Placement of Solid
Shaft Type
■Product Number
●K S Series
◇Right-Angle Geared Type
Induction
Motors
Electromagnetic
Brake Motors
High-Efficiency
K S Series
60 W
(1/12 HP)
100 W
(1/8 HP)
Induction
Motors
6W
(1/125 HP)
15 W
(1/150 HP)
25 W
(1/30 HP)
5 I K 100 V ES M T2 - GHR 15
①② ③
④
⑤
⑥
⑦
⑧
⑨
⑩
◇Parallel Shaft Combination Type
5 I K 100 V ES M T2 - 15A
①② ③
④
⑤
⑥
⑦
⑧
⑩
Protective Earth
Terminal
5 I K 100 V A - ES T2
①② ③
④
⑤ ⑩
⑥
60 W
(1/12 HP)
⑧
①
②
③
④
⑤
⑥
⑦
⑧
Motor Frame Size
5: 90 mm (3.54 in.)
Product Name
I: Induction Motor
Series
K: K Series
Output Power (W)
(Example) 100: 100 W (1/8 HP)
V: Three-Phase High Efficiency Motor
Power Supply Voltage/Number of Poles
ES: Three-Phase 220/230 VAC 4-Pole
M: Power Off Activated Electromagnetic Brake Type
T2: Terminal Box Type Blank: Lead Wire Type or Cable Type
⑨
Output Shaft Type and Direction
GHR: Hollow Shaft Type
GAR: Solid Shaft Type (R shaft)
⑩
Gear Ratio and Shaft Configuration
Number: Gear Ratio for Gearhead A: Round Shaft Type
GAL: Solid Shaft Type (L shaft)
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
5 I K 40 GN - SW 2 T
① ② ③
④
⑤
⑥
⑦ ⑧
①
②
③
④
Motor Frame Size
Motor Type
Series
Output Power (W)
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.)
I: Induction Motor
K: K Series
(Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type,
Type of Pinion
A: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥
Power Supply Voltage/
Number of Poles
2: RoHS-Compliant
T: Terminal Box Type
SW: Three-Phase 220/230 VAC 4-Pole TW: Three-Phase 220/230 VAC 2-Pole
⑦
⑧
M: Power Off Activated Type Electromagnetic Brake
◇Conduit Box Type
5 I K 40 GN - S H
① ② ③
C-28
④
⑤
⑥ ⑦
①
②
③
④
Motor Frame Size
Motor Type
Series
Output Power (W)
4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.)
I: Induction Motor
K: K Series
(Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type,
Type of Pinion
A, AA: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥
⑦
Power Supply Voltage
H: Conduit Box Type
S: Three-Phase 220/230 VAC
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Protective Earth
Terminal
Output Shaft Direction
Output Shaft Direction
L Shaft (Left)
R Shaft (Right)
●Output gear shaft direction when seen from the protective earth
terminal side.
●For motors equipped with a terminal box, the terminal box is on
the opposite side.
◇Round Shaft Type
●World K Series
40 W
(1/19 HP)
For the solid shaft type, either a right or left
facing output shaft can be selected.
Select the type that best suits the application.
Standard AC Motors
C-29
●Gearhead
5 GN 50 SA
①
①
②
③
④
②
③
④
Gearhead Frame Size
Type of Pinion
Gear Ratio
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.)
GN: GN Type Pinion GE: GE Type Pinion
(Example) 50: Gear Ratio of 50:1 10X denotes the decimal gearhead of gear ratio 10:1
Overview,
Product
Series
GN Type Pinion
SA: Long Life, Low Noise GN-S Gearhead
RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
GE Type Pinion
SA: Long Life GE-S Gearhead
RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
Constant
Speed
Motors
●BH Series
BH I 6 2 S M T - 100 RH
①
②③ ④ ⑤ ⑥ ⑦
⑧
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
⑨
①
②
③
④
⑤
⑥
⑦
⑧
Series
BH: BH Series
Motor Type
I: Induction Motor
Motor Frame Size
6: 104 mm (4.09 in.)
Output Power (W)
(Example) 2: 200 W (1/4 HP)
Power Supply Voltage
S: Three-Phase 220/230 VAC
M: Power Off Activated Type Electromagnetic Brake
T: Terminal Box Type Blank: Cable Type
Gear Ratio, Motor Shaft Type
A: Round Shaft Type Number: Gear Ratio of Combination Type
⑨
Type of Gearhead
(Combination type only)
RH: Right-Angle, Hollow Shaft Type RA: Right-Angle, Solid Shaft Type
Blank: Parallel Shaft Type
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-29
C-30 Three-Phase Induction Motors
■General Specifications
●K S Series
◇Right-Angle Geared Type
Induction
Motors
Electromagnetic
Brake Motors
High-Efficiency
K S Series
Item
Insulation Resistance
Specifications
100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient
temperature and humidity.
Temperature Rise
Temperature rise of windings is 80˚C (144˚F) or less measured by the resistance change method after rated load continuous operation under normal ambient temperature
and humidity.
Thermal Class
130 (B)
Operating Ambient
Temperature
0∼+40˚C (+32∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing)
60 W
(1/12 HP)
100 W
(1/8 HP)
Induction
Motors
6W
(1/125 HP)
15 W
(1/150 HP)
25 W
(1/30 HP)
Degree of Protection
Note
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
◇Parallel Shaft Combination Type/Round Shaft Type
Item
Insulation Resistance
Specifications
100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient
temperature and humidity.
Temperature Rise
A gearhead or equivalent heat sink (200 × 200 mm (7.87 × 7.87 in.), 5 mm (0.20 in.) thick, material: aluminum) is connected to the motor and the winding temperature
rise is measured at 80˚C (144˚F) or less using the resistance change method after rated load continuous operation under normal ambient temperature and humidity.
Thermal Class
130 (B)
Operating Ambient
Temperature
−10∼+40˚C (+14∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing)
Degree of Protection
40 W
(1/19 HP)
60 W
(1/12 HP)
Terminal Box Type: IP66 Refer to page C-24 for the materials and surface treatments.
Lead Wire Type: IP20
Cable Type: IP40
Terminal Box Type: IP66 (Except for installation surface of round shaft type) Refer to page C-24 for the materials and surface treatments.
Lead Wire Type: IP20
Cable Type: IP40
Note
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●World K Series
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
◇6 W (1/125 HP)∼90 W (1/8 HP) Type, 2-Pole/High-Speed Type
Item
Insulation Resistance
Specifications
100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and
humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity
with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class
130 (B)
Overheat Protection
6 W (1/125 HP) type has impedance protection.
Other Types Built-In thermal protector (automatic return type) Open: 130±5˚C (266±9˚F), Close: 82±15˚C (179.6±27˚F)
Three-Phase 15 W (1/50 HP) Type Open: 130±5˚C (266±9˚F), Close: 90±15˚C (194±27˚F)
Ambient Temperature
Ambient Humidity
−10∼+40˚C (+14∼+104˚F) (non-freezing)
85% or less (non-condensing)
Degree of Protection
Lead Wire Type: IP20
Lead wire type with electromagnetic brake 60 W (1/12 HP), 90 W (1/8 HP): IP40
Terminal Box Type, Conduit Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate (Material: Aluminum)
Motor Type
6 W (1/125 HP) Type
15 W (1/50 HP) Type
25 W (1/30 HP) Type
40 W (1/19 HP) Type (2-Pole, High-Speed 5IK60 Type)
60 W (1/12 HP), 90 W (1/8 HP), 150 W (1/5 HP) Type
C-30
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Size: mm (in.)
Thickness: mm (in.)
115×115 (4.53×4.53)
125×125 (4.92×4.92)
135×135 (5.31×5.31)
5 (0.20)
165×165 (6.50×6.50)
200×200 (7.87×7.87)
Standard AC Motors
C-31
●BH Series
Item
Insulation Resistance
Specifications
100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and
humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity
with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class
Overheat Protection
Ambient Temperature
Ambient Humidity
130 (B)
Built-in thermal protector (automatic return type) Open: 150±5˚C, (302±9˚F), Close: 96±15˚C (204.8±27˚F)
−10∼+40˚C (+14∼+104˚F) (non-freezing)
85% or less (non-condensing)
Degree of Protection
Cable Type: IP40
Terminal Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate: 230×230 mm (9.06×9.06 in.), Thickness: 5 mm (0.20 in.) (Material: Aluminum)
Overview,
Product
Series
Constant
Speed
Motors
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-31
C-32 Three-Phase Induction Motors
Induction Motors
60 W (1/12 HP)
Induction
Motors
Electromagnetic
Brake Motors
□90 mm (□3.54 in.)
Parallel Shaft Combination Type/Round Shaft Type
Product Name
Upper Level: Combination Type
Lower Level: Round Shaft Type
Terminal Box Type
100 W
(1/8 HP)
Induction
Motors
6W
(1/125 HP)
15 W
(1/150 HP)
60 W
(1/12 HP)
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Output
Lead Wire Type
5IK60VEST2-□A
5IK60VA-EST2
5IK60VES-□A
5IK60VA-ES
Voltage
Frequency
Current
Hz
50
60
50
60
A
0.37
0.33
0.38
0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque
mN•m
600
500
600
500
Rated Torque
oz-in
85
71
85
71
mN•m
410
350
410
350
oz-in
58
49
58
49
r/min
1400
1670
1400
1670
■Product Line
Combination
Type
Motor and gearhead are delivered pre-assembled.
The combination of motors and gearheads can be changed and they are also
available separately.
In addition, the gearhead can be removed and the assembly position can be
changed in 90˚ increments.
●Combination Type with Parallel Shaft
Type
Product Name
Terminal
Box Type
5IK60VEST2-□A
Lead Wire
5IK60VES-□A
Type
Gearhead
Motor
Combination Type
=
+
●Round Shaft Type
Gear Ratio
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60, 75, 90, 100
120, 150, 180
250, 300
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60, 75, 90, 100
120, 150, 180
250, 300
List Price
$250.00
$261.00
$271.00
$305.00
$228.00
$239.00
$249.00
$283.00
Type
Terminal Box Type
Lead Wire Type
Product Name
5IK60VA-EST2
5IK60VA-ES
List Price
$138.00
$116.00
The following items are included with each product.
Motor, Operating Manual
The following items are included with each product.
Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
■Permissible Torque on Combination Types
●50 Hz
Product Name
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5
1.8
15.9
6
2.2
19.4
7.5
2.8
24
9 12.5 15
3.3
4.6
5.5
29
40
48
120
18
6.6
58
25
8.8
77
30
10.6
93
36
12.7
112
50
17.6
155
60
21.2
187
75
26.4
230
90
30
260
●60 Hz
Product Name
15
12.5
10
8.3
6
5
100 120 150 180 250 300
30
30
30
30
30
30
260 260 260 260 260 260
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
5
1.6
14.1
6
1.9
16.8
7.5
2.4
21
9 12.5 15
2.8
3.9
4.7
24
34
41
18
5.7
50
25
7.5
66
30
9.0
79
36
10.8
95
50
15.1
133
60
18.1
160
75
22.6
200
20
18
●A number indicating the gear ratio is entered where the box □ is located within the product name.
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
15
12
10
7.2
6
90 100 120 150 180 250 300
27.1 30
30
30
30
30
30
230 260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
C-32
Rated Speed
●The values in the table are characteristics for the motor only.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
25 W
(1/30 HP)
40 W
(1/19 HP)
Lead Wire Type
■Specifications – Continuous Rating
High-Efficiency
K S Series
60 W
(1/12 HP)
Terminal Box Type
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
■Permissible Radial Load and Permissible
Axial Load
■Permissible Inertia J of Combination
Types
➜
➜
Page C-17
■Dimensions
C-33
Page C-19
Overview,
Product
Series
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215
● The terminal box cable outlet can be rotated and affixed in 4 possible directions.
● A number indicating the gear ratio is entered where the box □ is located within the product name.
Constant
Speed
Motors
Three-Phase
Induction
Motors
●Combination Type
◇Terminal Box Type
Gear Ratio
5IK60VEST2-□A
5IK60VGVH-EST2
5GVH□A
5∼18
25∼100
120∼300
A
Mass
kg lb.
2D CAD
4.1
9.0
A1395A
A1395B
A1395C
Single-Phase
Induction
Motors
Reversible
Motors
76.5 (3.01)
]
No. 12-24 UNC
12 (0.47) Deep
Electromagnetic
Brake Motors
+0.381
0
+0.015
0.106 0.000
2.692
(
)
Clutch &
Brake Motors
0.5
±
ϕ104 ±0.02)
9
(ϕ4.0
A-A
Low-Speed
Synchronous
Motors
0
A
in.
1.77
2.28
2.52
4.763−0.025
0.0000
(0.1875−0.0010
)
25
(0.98)
[
mm
45
58
64
90
(3.54)
23
(0.91)
34
(1.34)
L2
in.
1.44
1.95
2.19
0.0000
(ϕ1.5354−0.0010
)
L1
ϕ89 (ϕ3.50)
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0
ϕ19.050−0.013
0.0000
ϕ0.7500−0.0005 (3/4”)
18±0.5
0
ϕ39−0.025 (0.71±0.02)
30 max. (1.18 max.)
L1
mm
36.6
49.6
55.6
(0.1875+0.0016
0.0000)
Gearhead Product Name
4.763+0.040
0
Motor Product Name
39
(1.54)
Product Name
7.5 (0.30)
105
(4.13)
L2
4×ϕ8.5 (ϕ0.335) Thru
90
(3.54)
5 (0.20)
42±1
(1.65±0.04)
25±0.2
(0.984±0.008)
0
4.763−0.025
0.0000
(0.1875−0.0010
)
Torque
Motors
Watertight,
Dust-Resistant
Motors
Parallel Key (Included)
◇Lead Wire Type
A
90 (3.54)
No.12-24 UNC
12 (0.47) Deep
(
0.0000
0.1875−0.0010
Technical
Support
)
+0.381
0
+0.015
0.106 0.000
Brake Pack
2.692
(
)
Accessories
4×ϕ8.5
(ϕ0.335) Thru
A-A
Installation
.5
4±0 )
ϕ10 ±0.02
.09
(ϕ4
22.5°
www.orientalmotor.com
0
4.763−0.025
Parallel Key (Included)
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
CAD Data
Manuals
(0.984±0.008)
Linear
Heads
+0.040
25±0.2
0.0000
[ϕ0.7500−0.0005
(3/4”)]
A1393A
A1393B
A1393C
0
0
ϕ19.050−0.013
3.8
8.4
Right-Angle
Gearheads
4.763 0
(0.1875+0.0016
0.0000)
34
(1.34)
25
(0.98)
A
in.
1.77
2.28
2.52
2D CAD
5 max.
(0.20 max.)
16.5
(0.65)
5
(0.20)
42±1
(1.65±0.04)
mm
45
58
64
Mass
kg lb.
0.0000
(0.1875−0.0010
)
7.5
(0.30)
L
L
4.763−0.025
5GVH□A
5∼18
25∼100
120∼300
5IK60VGVH-ES
105 (4.13)
ϕ89 (ϕ3.50)
Gear Ratio
90 (3.54)
5IK60VES-□A
Gearhead Product Name
0.0000
(ϕ1.5354−0.0010
)
Motor Product Name
18±0.5
0
ϕ39−0.025 (0.71±0.02)
Product Name
Protective Earth Terminal M4
21.5
(0.85)
Detail Drawing of Protective Earth Terminal
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-33
C-34 Three-Phase Induction Motors
●Round Shaft Type
◇Terminal Box Type
15 W
(1/150 HP)
60 W
(1/12 HP)
46 (1.81)
0.0000
(ϕ3.2677−0.0014
)
0
90
(3.54)
0
90 (3.54)
4×ϕ6.5
(ϕ0.256) Thru
.5
)
4±0
ϕ10 9±0.02)
0
.
4
ϕ
(
90 (3.54)
(
40 W
(1/19 HP)
ϕ89 (ϕ3.50)
25 W
(1/30 HP)
7.5 (0.30)
37±1
(1.46±0.04)
2
(0.08)
0
105 (4.13)
0.0000
(ϕ0.4724−0.0007
)
5IK60VA-ES
Mass: 2.3 kg (5.1 lb.)
A1226
ϕ12−0.018
6W
(1/125 HP)
◇Lead Wire Type
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
Induction
Motors
4×ϕ6.5 (ϕ0.256) Thru
90 (3.54)
2 (0.08)
37±1
(1.46±0.04)
7.5 (0.30)
105 (4.13)
100 W
(1/8 HP)
±0.5
ϕ104 2)
±0.0
(ϕ4.09
ϕ83−0.035
60 W
(1/12 HP)
0.0000
(ϕ0.4724−0.0007
)
Applicable Cable Size
Outer Diameter
ϕ8∼ϕ13 mm
(ϕ0.31∼ϕ0.51 in.)
High-Efficiency
K S Series
76.5 (3.01)
ϕ12−0.018
23
(0.91)
Electromagnetic
Brake Motors
1 (0.04)
76.5 (3.01)
ϕ89 (ϕ3.50)
Induction
Motors
5IK60VA-EST2
Mass: 2.6 kg (5.7 lb.)
A1315
30 max.
(1.18 max.)
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
22.5°
5 max.
(0.20 max.)
90 W
(1/8 HP)
16.5
(0.65)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Protective Earth Terminal M4
21.5
(0.85)
Detail Drawing of Protective Earth Terminal
C-34
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-35
Induction Motors
100 W (1/8 HP)
□90 mm (□3.54 in.)
Right-Angle Geared Type
Terminal Box Type
Lead Wire Type
Constant
Speed
Motors
■Specifications – Continuous Rating
Product Name
Upper Level: Terminal Box Type
Lower Level: Lead Wire Type
Hollow Shaft Type
5IK100VEST2-GHR□
5IK100VES-GHR□
Speed
r/min
50 Hz
60 Hz
Rated Torque
Upper Level: N·m
Lower Level: lb-in
50 Hz
Starting Torque
Upper Level: N·m
Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia
Upper Level: J×10-4 kg·m2
Lower Level: oz-in2
Hollow Shaft✽
Solid Shaft
Solid Shaft Type (L shaft)
5IK100VEST2-GAR□
5IK100VES-GAR□
Gear Ratio
Permissible
Radial Load
Upper Level: N
Lower Level: lb.
Output
Solid Shaft Type (R shaft)
Instantaneous Stop
5IK100VEST2-GAL□
5IK100VES-GAL□
7.5
200
240
3.3
29
3.0
26
4.2
37
3.4
30
100
550
61.9
340
10
150
180
4.5
39
4.2
37
5.7
50
4.6
40
190
1040
110
600
15
100
120
7.0
61
6.4
56
8.8
77
7.1
62
420
2300
248
1360
20
75
90
9.4
83
8.7
76
11.8
104
9.6
84
700
3800
440
2400
1200
270
1100
240
900
200
1000
220
10 mm (0.39 in.) from
Installation Surface
20 mm (0.79 in.) from
Installation Surface
10 mm (0.39 in.) from
End of Output Shaft
20 mm (0.79 in.) from
End of Output Shaft
25
60
72
11.8
104
10.9
96
14.8
130
12.0
106
1100
6000
688
3800
✽The radial load at each distance can be calculated with a formula. ➜ Page C-16
●The speed is calculated by dividing the motor's synchronous speed
(50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the
inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter.
Note
●Do not perform instantaneous bi-directional operations.
●Hollow Shaft Type
Terminal Box
5IK100VEST2-GHR□
Type
Lead Wire
Type
5IK100VES-GHR□
Frequency
Current
Hz
50
60
50
60
A
0.55
0.52
0.57
0.52
W
HP
VAC
1/8
Three-Phase 220
100
1/8
Three-Phase 230
30
50
60
14.3
126
13.2
116
17.9
158
14.5
128
1600
8800
990
5400
40
50
60
75
100 120 150 200 240
37
30
25
20
15
12.5
10
7.5
6.2
45
36
30
24
18
15
12
9
7.5
19.2
24.0
28.9
36.2
48.4
58.2
67.9
70
70
169
210
250
320
420
510
600
610
610
17.7
22.2
26.7
33.4
44.7
53.7
62.7
70
70
156
196
230
290
390
470
550
610
610
24.0
30.0
36.1
45.2
60.4
70
70
70
70
210
260
310
400
530
610
610
610
610
19.5
24.4
29.4
36.8
49.2
59.1
69.0
70
70
172
210
260
320
430
520
610
610
610
2800 4500 6000 8000 12000 17000 25000 25000 25000
15300 25000 33000 44000 66000 93000 137000 137000 137000
1760 2750 2750 2750 2750 2750 2750 2750 2750
9600 15000 15000 15000 15000 15000 15000 15000 15000
2200
490
2000
450
1700
380
1850
410
350
78
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
◇Load Position
●Hollow Shaft Type
●Solid Shaft Type
Radial Load
Brake Pack
Radial Load
Axial
Load
Axial Load
10 mm (0.39 in.)
20 mm (0.79 in.)
10 mm (0.39 in.)
20 mm (0.79 in.)
Distance from Installation Surface
■Product Line
Product Name
Voltage
100
Permissible Axial Load
Upper Level: N Lower Level: lb.
Type
Overview,
Product
Series
Accessories
Installation
Distance from Output Shaft End
●Solid Shaft Type
Gear Ratio
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
List Price
$352.00
$336.00
$340.00
$347.00
$380.00
$407.00
$475.00
$329.00
$314.00
$317.00
$325.00
$358.00
$385.00
$453.00
Type
Product Name
Terminal Box 5IK100VEST2-GAR□
Type
5IK100VEST2-GAL□
Lead Wire
Type
5IK100VES-GAR□
5IK100VES-GAL□
Gear Ratio
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price
$317.00
$302.00
$306.00
$312.00
$347.00
$374.00
$440.00
$295.00
$280.00
$284.00
$290.00
$325.00
$352.00
$418.00
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-35
C-36 Three-Phase Induction Motors
■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws➜ Page C-215
● The terminal box cable outlet can be rotated and affixed in 4 possible directions.
● A number indicating the gear ratio is entered where the box □ is located within the product name.
Induction
Motors
●Terminal Box Type
◇Hollow Shaft Type
5 (0.20)
4 (0.16)
+0.21
0
(ϕ1.0315+0.0083
0.0000)
76.5 (3.01)
0
ϕ58−0.046
30 max.
(1.18 max.)
0.0000
(ϕ2.2835−0.0018
)
A
A
21 (0.83)
4×ϕ8.5
(ϕ0.335) Thru
ϕ62 (ϕ2.44)
0
8−0.036
15
(0.59)
60 W
(1/12 HP)
98 (3.86)
0.0000
(0.3150−0.0014
)
21 (0.83)
40 W
(1/19 HP)
(0.3150+0.0016
0.0000)
37
(1.46)
25 W
(1/30 HP)
131.6 (5.18)
124 (4.88)
45.5 (1.79)
70 (2.76)
37
+0.040
(1.46)
8 0
ϕ89 (ϕ3.50)
37
(1.46) 28.3
(1.11)
39 (1.54)
90 (3.54)
Safety Cover
(Included)
0
40−0.3
0
7−0.090
0.0000
(0.2756−0.0035
)
10
(0.39)
0.000
(1.575−0.012
)
23 (0.91)
260 (10.24)
76.5 (3.01)
49 (1.93)
6W
(1/125 HP)
90 W
(1/8 HP)
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft)
A1319
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
0
18.5−0.1
0
6−0.030
0.000
0.728−0.004
(
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
)
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the
gearhead shaft.
A
M6×12 (0.47) Deep
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
30 max. (1.18 max.)
260 (10.24)
ϕ89 (ϕ3.50)
A
131.6 (5.18)
124 (4.88)
45.5 (1.79)
70 (2.76)
37 (1.46)
24.5 (0.96)
37
(1.46)
0
0.0000
(ϕ2.2835−0.0018
)
ϕ58−0.046
0
5 (0.20)
4 (0.16)
32
(1.26)
0.0000
(ϕ0.8661−0.0008
)
48±1 (1.89±0.04)
40±0.5 (1.57±0.02)
ϕ22−0.021
98 (3.86)
76.5 (3.01)
49(1.93)
37
(1.46)
90 (3.54)
39 (1.54)
4
(0.16)
76.5 (3.01)
23
(0.91)
32±0.2
(1.260±0.008)
0
0.0000
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAR□ Mass: 7.1 kg (15.6 lb.)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
C-36
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
0.0000
(ϕ2.2835−0.0018
)
ϕ26.2
+0.033
0
ϕ40
(ϕ1.57)
ϕ58−0.046
A-A
Induction
Motors
BH Series
200 W
(1/4 HP)
ϕ40
(ϕ1.57)
5 (0.20)
4 (0.16)
0
30 (1.18)
15 (0.59)
1.35
(0.05)
ϕ25
100 W
(1/8 HP)
15 W
(1/150 HP)
A1318
(ϕ0.9843+0.0013
0.0000)
+0.033
0
30 (1.18)
15 (0.59)
1.35
(0.05)
108 (4.25)
ϕ25
60 W
(1/12 HP)
ϕ26.2
+0.21
0
High-Efficiency
K S Series
(ϕ0.9843+0.0013
0.0000)
5IK100VEST2-GHR□ Mass: 7.1 kg (15.6 lb.)
(ϕ1.0315+0.0083
0.0000)
Electromagnetic
Brake Motors
4×ϕ8.5 (ϕ0.335)
Thru
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-37
◇Solid Shaft Type (L shaft)
A1320
0.0000
Mass: 7.1 kg (15.6 lb.)
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAL□
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
0
32±0.2
(1.260±0.008)
0
6−0.030
(
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
30 max. (1.18 max.)
0
18.5−0.1
0.000
0.728−0.004
Overview,
Product
Series
)
Constant
Speed
Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
76.5 (3.01)
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
4 (0.16)
Reversible
Motors
39
(1.54)
0
0.0000
(ϕ0.8661−0.0008
)
0
90 (3.54)
37
(1.46)
4×ϕ8.5 (ϕ0.335)
Thru
5 (0.20)
4 (0.16)
32
(1.26)
98 (3.86)
76.5 (3.01)
49 (1.93)
A
37
(1.46)
ϕ89 (ϕ3.50)
ϕ22−0.021
0.0000
(ϕ2.2835−0.0018
)
48±1 (1.89±0.04)
40±0.5 (1.57±0.02)
131.6 (5.18)
124 (4.88)
70 (2.76)
45.5 (1.79)
37
(1.46)
24.5 (0.96)
ϕ58−0.046
23
(0.91)
260 (10.24)
A
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
M6×12 (0.47) Deep
Torque
Motors
●Lead Wire Type
◇Hollow Shaft Type
98 (3.86)
49 (1.93)
21 (0.83)
37
(1.46)
37
(1.46)
Right-Angle
Gearheads
+0.040
8 0
(0.3150+0.0016
0.0000)
Linear
Heads
A
Brake Pack
A
Accessories
4×ϕ8.5 (ϕ0.335) Thru
Safety Cover
(Included)
5 max.
(0.20 max.)
260 (10.24)
124 (4.88)
70 (2.76)
45.5 (1.79)
90 (3.54)
21 (0.83)
Watertight,
Dust-Resistant
Motors
A1277
ϕ89 (ϕ3.50)
Mass: 6.8 kg (15.0 lb.)
37
(1.46) 28.3
(1.11)
5IK100VES-GHR□
Electromagnetic
Brake Motors
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
22.5°
Installation
0
)
(
ϕ40
(ϕ1.57)
)
30 (1.18)
15 (0.59)
1.35
(0.05)
(
108 (4.25)
ϕ58−0.046
0.0000
(ϕ2.2835−0.0018
)
ϕ62 (ϕ2.44)
8−0.036
0
40−0.3
0
15
(0.59)
A-A
5 (0.20)
4 (0.16)
ϕ40
(ϕ1.57)
0
7−0.09
116 (4.57)
0.0000
ϕ58−0.046 (ϕ2.2835−0.0018)
0
0.0000
(0.2756−0.0035
)
10
(0.39)
0.000
(1.575−0.012
)
0.0000
(0.3150−0.0014
)
5 (0.20)
4 (0.16)
ϕ25
16.5 (0.65)
+0.033
0
+0.0013
ϕ0.9843 0.0000
+0.21
ϕ26.2 0
+0.0083
ϕ1.0315 0.0000
+0.033
0
(ϕ0.9843+0.0013
0.0000)
30 (1.18)
15 (0.59)
1.35
(0.05)
ϕ25
+0.21
0
ϕ26.2
(ϕ1.0315+0.0083
0.0000)
Protective Earth Terminal M4
Safety Cover (Included)
CAD Data
Manuals
Parallel Key (Included)
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-37
C-38 Three-Phase Induction Motors
◇Solid Shaft Type (R shaft)
37
(1.46)
16.5 (0.65)
0
6−0.030
32±0.2
(1.260±0.008)
0.0000
(0.2362−0.0012
)
0
Protective Earth
Terminal M4
0
18.5−0.1
0
6−0.030
0.000
(0.728−0.004
)
0.0000
(0.2362−0.0012
)
A-A
Parallel Key (Included)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
◇Solid Shaft Type (L shaft)
A1279
0
90 (3.54)
5 max.
(0.20 max.)
M6×12 (0.47)
Deep
Protective Earth Terminal M4
22.5°
32±0.2
(1.260±0.008)
0
4×ϕ8.5
(ϕ0.335) Thru
16.5 (0.65)
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
A
6−0.030
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
4 (0.16)
A
37
(1.46)
ϕ89 (ϕ3.50)
BH Series
200 W
(1/4 HP)
37
(1.46)
90 W
(1/8 HP)
98 (3.86)
49 (1.93)
32
(1.26)
0.0000
(0.2362−0.0012
)
60 W
(1/12 HP)
0
124 (4.88)
70 (2.76)
45.5 (1.79)
37
(1.46)
24.5 (0.96)
0.0000
(ϕ0.8661−0.0008
)
48±1
40±0.5 (1.57±0.02) (1.89±0.04)
5 (0.20)
4 (0.16)
260 (10.24)
ϕ22−0.021
5IK100VES-GAL□ Mass: 6.8 kg (15.0 lb.)
40 W
(1/19 HP)
0.0000
(ϕ2.2835−0.0018
)
25 W
(1/30 HP)
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
22.5°
ϕ58−0.046
15 W
(1/150 HP)
4×ϕ8.5 (ϕ0.335)
Thru
M6×12 (0.47) Deep
Induction
Motors
6W
(1/125 HP)
0.0000
(ϕ2.2835−0.0018
)
A
5 max.
(0.20 max.)
60 W
(1/12 HP)
260 (10.24)
124 (4.88)
70 (2.76)
45.5 (1.79)
37 (1.46)
24.5 (0.96)
37
(1.46)
High-Efficiency
K S Series
0
A
90 (3.54)
Electromagnetic
Brake Motors
ϕ22−0.021
32
(1.26)
ϕ58−0.046
Induction
Motors
0.0000
(ϕ0.8661−0.0008
)
4
(0.16)
100 W
(1/8 HP)
A1278
48±1 (1.89±0.04)
40±0.5 (1.57±0.02)
98 (3.86)
49 (1.93)
5 (0.20)
4 (0.16)
ϕ89 (ϕ3.50)
5IK100VES-GAR□ Mass: 6.8 kg (15.0 lb.)
0
18.5−0.1
0
6−0.030
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
0.000
(0.728−0.004
)
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
C-38
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-39
Induction Motors
100 W (1/8 HP)
□90 mm (□3.54 in.)
Parallel Shaft Combination Type/Round Shaft Type
Terminal Box Type
Lead Wire Type
Constant
Speed
Motors
■Specifications – Continuous Rating
Product Name
Upper Level: Combination Type
Lower Level: Round Shaft Type
Terminal Box Type
Output
Lead Wire Type
5IK100VEST2-□A
5IK100VA-EST2
5IK100VES-□A
5IK100VA-ES
Voltage
Frequency
Current
Hz
50
60
50
60
A
0.55
0.48
0.57
0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque
mN•m
850
700
850
700
Rated Torque
oz-in
120
99
120
99
mN•m
690
570
690
570
Rated Speed
oz-in
97
80
97
80
r/min
1400
1680
1400
1680
Reversible
Motors
Electromagnetic
Brake Motors
■Product Line
Clutch &
Brake Motors
Motor and gearhead are delivered pre-assembled.
The combination of motors and gearheads can be changed and they are also
available separately.
In addition, the gearhead can be removed and the assembly position can be
changed in 90˚ increments.
●Combination Type with Parallel Shaft
Type
Product Name
Terminal
Box Type
5IK100VEST2-□A
Lead Wire
Type
5IK100VES-□A
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
●The values in the table are characteristics for the motor only.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Combination
Type
Overview,
Product
Series
Gearhead
Motor
Combination Type
=
+
Torque
Motors
●Round Shaft Type
Gear Ratio
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60
75, 90, 100, 120, 150, 180
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60
75, 90, 100, 120, 150, 180
List Price
$269.00
$289.00
$299.00
$248.00
$268.00
$278.00
Type
Terminal Box Type
Lead Wire Type
Low-Speed
Synchronous
Motors
Product Name
5IK100VA-EST2
5IK100VA-ES
Watertight,
Dust-Resistant
Motors
List Price
$156.00
$135.00
Right-Angle
Gearheads
The following items are included with each product.
Motor, Operating Manual
Linear
Heads
The following items are included with each product.
Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
Brake Pack
■Permissible Torque on Combination Types
Accessories
●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed
r/min
Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
300
250
200
166
120
100
83
60
50
41
30
25
20
16.6
15
12.5
10
8.3
5
3.1
27
6
3.7
32
7.5
4.7
41
9
5.6
49
12.5
7.8
69
15
9.3
82
18
10.7
94
25
14.8
130
30
17.8
157
36
21.4
189
50
29.7
260
60
35.6
310
75
40
350
90
40
350
100
40
350
120
40
350
150
40
350
180
40
350
●60 Hz
Installation
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed
r/min
Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
18
15
12
10
5
2.6
23
6
3.1
27
7.5
3.8
33
9
4.6
40
12.5
6.4
56
15
7.7
68
18
8.8
77
25
12.3
108
30
14.7
130
36
17.6
155
50
24.5
210
60
29.4
260
75
34.6
300
90
40
350
100
40
350
120
40
350
150
40
350
180
40
350
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-39
C-40 Three-Phase Induction Motors
Induction
Motors
■Permissible Radial Load and Permissible
Axial Load
■Permissible Inertia J of Combination
Types
➜
➜
Page C-17
■Dimensions
Page C-19
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215
Electromagnetic ● The terminal box cable outlet can be rotated and affixed in 4 possible directions.
Brake Motors ● A number indicating the gear ratio is entered where the box □ is located within the product name.
●Combination Type
◇Terminal Box Type
5IK100VEST2-□A
5IK100VGVR-EST2
5GVR□A
5∼15
18∼36
50∼180
Mass
kg lb.
2D CAD
4.7
10.3
A1396A
A1396B
A1396C
76.5 (3.01)
7.5 (0.30)
25 W
(1/30 HP)
120
(4.72)
L2
4.763+0.040
0
39
(1.54)
+0.381
0
+0.015
0.106 0.000
2.692
(
±0.5
ϕ104 ±0.02)
9
(ϕ4.0
)
25±0.2
(0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru
90
(3.54)
5 (0.20)
42±1
(1.65±0.04)
)
A-A
0
A
No. 12-24 UNC
12 (0.47) Deep
4.763−0.025
15 W
(1/150 HP)
in.
1.77
2.28
2.76
0.0000
[ϕ0.7500−0.0005
(3/4”)]
0
A
0
ϕ19.050−0.013
mm
45
58
70
90
(3.54)
25
(0.98)
L2
in.
1.44
1.95
2.43
0.0000
(ϕ1.5354−0.0010
)
34
(1.34)
18±0.5
L1
23
(0.91)
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
ϕ89 (ϕ3.50)
6W
(1/125 HP)
30 max. (1.18 max.)
mm
36.6
49.6
61.6
0
4.763−0.025
0.0000
(0.1875−0.0010
)
(
Gear Ratio
(0.1875+0.0016
0.0000)
Gearhead Product Name
0.0000
0.1875−0.0010
Motor Product Name
100 W
(1/8 HP)
Induction
Motors
L1
Product Name
60 W
(1/12 HP)
ϕ39−0.025 (0.71±0.02)
High-Efficiency
K S Series
Parallel Key (Included)
5IK100VES-□A
5IK100VGVR-ES
5GVR□A
5∼15
18∼36
50∼180
90 W
(1/8 HP)
Mass
kg lb.
2D CAD
4.4
9.7
A1394A
A1394B
A1394C
5
(0.20)
ϕ89 (ϕ3.50)
7.5
(0.30)
42±1
(1.65±0.04)
34
(1.34)
25
(0.98)
A
0.0000
[ϕ0.7500−0.0005
(3/4”)]
0
4.763−0.025
0.0000
(0.1875−0.0010
)
90 (3.54)
+0.381
0
A-A
Parallel Key (Included)
No.12-24 UNC
12 (0.47) Deep
2.692
(0.106+0.015
0.000)
4×ϕ8.5
(ϕ0.335) Thru
.5
4±0
ϕ10 9±0.02)
.0
(ϕ4
16.5
(0.65)
A
0
ϕ19.050−0.013
25±0.2
(0.984±0.008)
0.0000
(ϕ1.5354−0.0010
)
L
18±0.5
0
ϕ39−0.025 (0.71±0.02)
120 (4.72)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
22.5°
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
C-40
in.
1.77
2.28
2.76
0
BH Series
200 W
(1/4 HP)
L
mm
45
58
70
+0.040
0
Gear Ratio
4.763
Gearhead Product Name
0.0000
(0.1875−0.0010
)
Motor Product Name
4.763−0.025
Product Name
60 W
(1/12 HP)
(0.1875+0.0016
0.0000)
◇Lead Wire Type
90
(3.54)
40 W
(1/19 HP)
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Protective Earth Terminal M4
5 max.
(0.20 max.)
21.5
(0.85)
Detail Drawing of Protective Earth Terminal
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-41
●Round Shaft Type
◇Terminal Box Type
5IK100VA-EST2
Mass: 3.2 kg (7.0 lb.)
A1317
46
(1.81)
Overview,
Product
Series
Constant
Speed
Motors
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
)
0
ϕ12−0.018
23
(0.91)
±0.5
ϕ104 2)
±0.0
(ϕ4.09
90
(3.54)
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
(
ϕ89
(ϕ3.50)
Applicable Cable Size
Outer Diameter
ϕ8∼ϕ13 mm
(ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
1
(0.04)
76.5 (3.01)
0.0000
(ϕ0.4724−0.0007
)
30 max.
(1.18 max.)
7.5 (0.30)
120 (4.72)
4×ϕ6.5 (ϕ0.256) Thru
90 (3.54)
2 (0.08)
37±1
(1.46±0.04)
Reversible
Motors
◇Lead Wire Type
5IK100VA-ES
Mass: 2.9 kg (6.4 lb.)
Electromagnetic
Brake Motors
90 (3.54)
Clutch &
Brake Motors
4×ϕ6.5
(ϕ0.256) Thru
4
ϕ10 9±0.02)
0
(ϕ4.
90 (3.54)
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
16.5
(0.65)
Torque
Motors
(
ϕ89 (ϕ3.50)
Low-Speed
Synchronous
Motors
5
± 0.
)
0
7.5 (0.30)
37±1
(1.46±0.04)
2 (0.08)
ϕ12−0.018
120 (4.72)
0.0000
(ϕ0.4724−0.0007
)
A1228
Motor Leads 300 mm (12 in.) Length
UL Style 3271, AWG20
22.5°
Watertight,
Dust-Resistant
Motors
Protective Earth Terminal M4
5 max.
21.5
(0.20 max.) (0.85)
Right-Angle
Gearheads
Detail Drawing of Protective Earth Terminal
Linear
Heads
Brake Pack
Accessories
Installation
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-41
C-42 Three-Phase Induction Motors
Electromagnetic Brake Type Motors
60 W (1/12 HP)
Induction
Motors
□90 mm (□3.54 in.)
Parallel Shaft Combination Type/Round Shaft Type
Terminal Box Type
Cable Type
Electromagnetic
Brake Motors
High-Efficiency
K S Series
■Specifications – Continuous Rating
Product Name
Upper Level: Combination Type
Lower Level: Round Shaft Type
60 W
(1/12 HP)
100 W
(1/8 HP)
Induction
Motors
6W
(1/125 HP)
Terminal Box Type
Output
Cable Type
5IK60VESMT2-□A
5IK60VA-ESMT2
5IK60VESM-□A
5IK60VA-ESM
25 W
(1/30 HP)
Frequency
Current
Hz
50
60
50
60
A
0.37
0.33
0.38
0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque
mN•m
600
500
600
500
oz-in
85
71
85
71
Rated Torque
mN•m
410
350
410
350
Rated Speed
oz-in
58
49
58
49
r/min
1400
1670
1400
1670
●The values in the table are characteristics for the motor only.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
●Electromagnetic Brake (Power off activated type)
Voltage
VAC
Product Name
15 W
(1/150 HP)
Voltage
Terminal Box Type
Cable Type
5IK60VESMT2-□A
5IK60VA-ESMT2
5IK60VESM-□A
5IK60VA-ESM
Single-Phase 220
Single-Phase 230
Frequency
Hz
50
60
50
60
Current
A
Input
W
Static Friction Torque
mN•m
oz-in
0.04
6
500
71
0.04
6
500
71
●The values in the table are characteristics for the motor only.
40 W
(1/19 HP)
■Product Line
60 W
(1/12 HP)
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Combination
Type
Motor and gearhead are delivered pre-assembled.
The combination of motors and gearheads can be changed and they are also
available separately.
In addition, the gearhead can be removed and the assembly position can be
changed in 90˚ increments.
●Combination Type with Parallel Shaft
Type
Product Name
Terminal
5IK60VESMT2-□A
Box Type
Cable
Type
5IK60VESM-□A
List Price
$384.00
$395.00
$405.00
$439.00
$362.00
$373.00
$383.00
$417.00
Type
Terminal Box Type
Cable Type
Product Name
5IK60VA-ESMT2
5IK60VA-ESM
The following items are included with each product.
Motor, Operating Manual
The following items are included with each product.
Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
C-42
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
=
●Round Shaft Type
Gear Ratio
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60, 75, 90, 100
120, 150, 180
250, 300
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60, 75, 90, 100
120, 150, 180
250, 300
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Gearhead
Motor
Combination Type
List Price
$272.00
$250.00
+
Standard AC Motors
C-43
■Permissible Torque on Combination Types
●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Product Name
Gear Ratio
5IK60VESMT2-□A
5IK60VESM-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5
1.8
15.9
6
2.2
19.4
7.5
2.8
24
9 12.5 15
3.3
4.6
5.5
29
40
48
120
18
6.6
58
25
8.8
77
30
10.6
93
36
12.7
112
50
17.6
155
60
21.2
187
75
26.4
230
90
30
260
●60 Hz
15
12.5
10
8.3
6
5
100 120 150 180 250 300
30
30
30
30
30
30
260 260 260 260 260 260
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Product Name
Gear Ratio
5IK60VESMT2-□A
5IK60VESM-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
5
1.6
14.1
6
1.9
16.8
7.5
2.4
21
9 12.5 15
2.8
3.9
4.7
24
34
41
18
5.7
50
25
7.5
66
30
9.0
79
36
10.8
95
50
15.1
133
60
18.1
160
75
22.6
200
90
27.1
230
18
15
12
10
7.2
100 120 150 180 250 300
30
30
30
30
30
30
260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
●A number indicating the gear ratio is entered where the box □ is located within the product name.
■Permissible Radial Load and Permissible
Axial Load
■Permissible Inertia J of Combination
Types
➜
➜
Page C-17
Page C-19
■ Starting and Braking Characteristics (Reference values - motor only)
6
Overview,
Product
Series
Constant
Speed
Motors
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
200
Three-Phase 50 Hz
Torque
Motors
Three-Phase 60 Hz
Watertight,
Dust-Resistant
Motors
5
4
3
2
Braking Time
Starting Time
Time [ms]
Overrun [Rotations]
150
Right-Angle
Gearheads
100
Linear
Heads
50
Overrun
Brake Pack
1
0
0
0.25
0
1
0.5
2
3
0.75
4
Inertia J
CAD Data
Manuals
1
5
1.25
[×10-4 kg·m2]
6
7
Accessories
8
Installation
[oz-in2]
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-43
C-44 Three-Phase Induction Motors
■Dimensions
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215
● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions.
● A number indicating the gear ratio is entered where the box □ is located within the product name.
Induction
Motors
●Combination Type
◇Terminal Box Type
5IK60VESMT2-□A
5IK60VGVH-ESMT2
5GVH□A
5∼18
25∼100
120∼300
7.5 (0.30)
15 W
(1/150 HP)
40
(1.57)
±0.5
ϕ104 ±0.02)
9
(ϕ4.0
42±1
(1.65±0.04)
(
)
0
4.763−0.025
0.0000
(0.1875−0.0010
)
Parallel Key (Included)
5GVH□A
5∼18
25∼100
120∼300
60 W
(1/12 HP)
7.5
(0.30)
5
(0.20)
BH Series
200 W
(1/4 HP)
42±1
(1.65±0.04)
34
(1.34)
25
(0.98)
ϕ88 (ϕ3.46)
A
5 max.
(0.20 max.)
A
80 (3)
32.5
(1.28)
1000 (3.3 ft.)
2D CAD
4.5
9.9
A1397A
A1397B
A1397C
25±0.2
(0.984±0.008)
0.0000
[ϕ0.7500−0.0005
(3/4”)]
0
4.763−0.025
0.0000
(0.1875−0.0010
)
Parallel Key (Included)
No.12-24 UNC
12 (0.47) Deep
+0.381
0
(0.106+0.015
0.000)
A-A
±0.5
ϕ104 ±0.02)
9
(ϕ4.0
27
(1.06)
Protective Earth
Terminal M4
20
(0.79)
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
2.692
90 (3.54)
4×ϕ8.5
(ϕ0.335) Thru
✽Motor Cable ϕ8 (ϕ0.31)
Mass
kg lb.
0
ϕ19.050−0.013
0.0000
(ϕ1.5354−0.0010
)
L
18±0.5
0
ϕ39−0.025 (0.71±0.02)
149 (5.87)
90 W
(1/8 HP)
in.
1.77
2.28
2.52
7.5
(0.30)
5IK60VGVH-ESM
mm
45
58
64
+0.040
Gear Ratio
0
5IK60VESM-□A
L
Gearhead Product Name
0.0000
(0.1875−0.0010
)
Motor Product Name
4.763 0
(0.1875+0.0016
0.0000)
◇Cable Type
Product Name
C-44
+0.381
0
+0.015
0.106 0.000
2.692
A-A
25±0.2
(0.984±0.008)
4×ϕ8.5 (ϕ0.335)
Thru
90
(3.54)
5 (0.20)
L
149
(5.87)
40 W
(1/19 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
No. 12-24 UNC
12 (0.47) Deep
4.763−0.025
25 W
(1/30 HP)
A1399A
A1399B
A1399C
0
A
4.8
10.6
90
(3.54)
6W
(1/125 HP)
2D CAD
14.5
(0.57)
Induction
Motors
ϕ88 (ϕ3.46)
A
Mass
kg lb.
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0.0000
[ϕ0.7500−0.0005
(3/4”)]
25
(0.98)
23
(0.91)
100 W
(1/8 HP)
0
ϕ19.050−0.013
34
(1.34)
in.
1.77
2.28
2.52
90
(3.54)
72.5 (2.85)
0.0000
(ϕ1.5354−0.0010
)
76.5 (3.01)
30 max.
(1.18 max.)
60 W
(1/12 HP)
mm
45
58
64
0.0000
(0.1875−0.0010
)
Gear Ratio
+0.040
Gearhead Product Name
4.763 0
(0.1875+0.0016
0.0000)
Motor Product Name
18±0.5
0
ϕ39−0.025 (0.71±0.02)
High-Efficiency
K S Series
L
Product Name
4.763−0.025
Electromagnetic
Brake Motors
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-45
●Round Shaft Type
◇Terminal Box Type
A1322
Applicable Cable Size
Outer Diameter
ϕ8∼ϕ13 mm
(ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
Overview,
Product
Series
0
ϕ12−0.018
40 (1.57)
72.5 (2.85)
30 max.
(1.18 max.)
23
(0.91)
76.5 (3.01)
Mass: 3.3 kg (7.3 lb.)
0.0000
(ϕ0.4724−0.0007
)
5IK60VA-ESMT2
Constant
Speed
Motors
.5
90 (3.54)
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
(
ϕ88 (ϕ3.46)
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
)
4±0
ϕ10 9±0.02)
0
(ϕ4.
7.5 (0.30)
149 (5.87)
4×ϕ6.5 (ϕ0.256) Thru
90 (3.54)
2 (0.08)
37±1
(1.46±0.04)
Reversible
Motors
◇Cable Type
Electromagnetic
Brake Motors
Mass: 3.0 kg (6.6 lb.)
A1283
±0.5
ϕ104 .02)
±0
(ϕ4.09
20
(0.79)
Protective Earth
Terminal M4
32.5
(1.28)
80 (3)
1000 (3.3 ft.)
4×ϕ6.5
(ϕ0.256) Thru
✽Motor Cable ϕ8 (ϕ0.31)
27
(1.06)
14.5 (0.57)
5 max.
(0.20 max.)
(
90
(3.54)
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
7.5 (0.30)
90 (3.54)
)
0
Clutch &
Brake Motors
(
7.5 (0.30)
37±1
(1.46±0.04)
2 (0.08)
ϕ12−0.018
149 (5.87)
0.0000
ϕ0.4724−0.0007
)
5IK60VA-ESM
Detail Drawing of Protective Earth Terminal
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
✽Motor Cable Core
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
Brake Pack
Accessories
Installation
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-45
C-46 Three-Phase Induction Motors
Electromagnetic Brake Type Motors
100 W (1/8 HP)
Induction
Motors
Electromagnetic
Brake Motors
□90 mm (□3.54 in.)
Right-Angle Geared Type
Terminal Box Type
■Specifications – Continuous Rating
Hollow Shaft Type
60 W
(1/12 HP)
Induction
Motors
6W
(1/125 HP)
15 W
(1/150 HP)
25 W
(1/30 HP)
40 W
(1/19 HP)
Solid Shaft Type (R shaft)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Solid Shaft Type (L shaft)
Gear Ratio
Speed
r/min
50 Hz
60 Hz
Rated Torque
Upper Level: N•m
Lower Level: lb-in
50 Hz
Starting Torque
Upper Level: N•m
Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia
Upper Level: J×10-4 kg•m2
Lower Level: oz-in2
Hollow Shaft✽
Permissible
Radial Load
Upper Level: N
Lower Level: lb.
Solid Shaft
BH Series
200 W
(1/4 HP)
Output
5IK100VESMT2-GHR□ 5IK100VESMT2-GAR□ 5IK100VESMT2-GAL□
5IK100VESM-GHR□
5IK100VESM-GAR□
5IK100VESM-GAL□
60 W
(1/12 HP)
90 W
(1/8 HP)
Motor
Product Name
Upper Level: Terminal Box Type
Lower Level: Cable Type
High-Efficiency
K S Series
100 W
(1/8 HP)
Cable Type
Instantaneous Stop
7.5
200
240
3.3
29
3.0
26
4.2
37
3.4
30
100
550
61.9
340
10
150
180
4.5
39
4.2
37
5.7
50
4.6
40
190
1040
110
600
W
Voltage
Frequency Current
HP
VAC
100
1/8
Three-Phase
220
100
1/8
Three-Phase
230
15
100
120
7.0
61
6.4
56
8.8
77
7.1
62
420
2300
248
1360
10 mm (0.39 in.) from
Installation Surface
20 mm (0.79 in.) from
Installation Surface
10 mm (0.39 in.) from
End of Output Shaft
20 mm (0.79 in.) from
End of Output Shaft
20
75
90
9.4
83
8.7
76
11.8
104
9.6
84
700
3800
440
2400
1200
270
1100
240
900
200
1000
220
Permissible Axial Load
Upper Level: N Lower Level: lb.
✽The radial load at each distance can be calculated with a formula.
➜ Page C-16
●The speed is calculated by dividing the motor's synchronous speed
(50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the
inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter.
Note
●Do not perform instantaneous bi-directional operations.
25
60
72
11.8
104
10.9
96
14.8
130
12.0
106
1100
6000
688
3800
Electromagnetic Brake (Power off activated type)
30
50
60
14.3
126
13.2
116
17.9
158
14.5
128
1600
8800
990
5400
Hz
50
60
50
60
A
0.55
0.52
0.57
0.52
Voltage
VAC
Single-Phase
220
Single-Phase
230
Hz
50
60
50
60
●Hollow Shaft Type
oz-in
0.04
6
500
71
0.04
6
500
71
Radial Load
Axial
Load
Axial Load
10 mm (0.39 in.)
20 mm (0.79 in.)
10 mm (0.39 in.)
20 mm (0.79 in.)
Distance from Output Shaft End
●A number indicating the gear ratio is entered where the box □ is located within the product name.
Page
mN•m
●Solid Shaft Type
Radial Load
Page C-52
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
W
◇Load Position
■Starting and Braking Characteristics (Reference values)
C-46
A
40
50
60
75
100 120 150 200 240
37
30
25
20
15
12.5
10
7.5
6.2
45
36
30
24
18
15
12
9
7.5
19.2
24.0
28.9
36.2
48.4
58.2
67.9
70
70
169
210
250
320
420
510
600
610
610
17.7
22.2
26.7
33.4
44.7
53.7
62.7
70
70
156
196
230
290
390
470
550
610
610
24.0
30.0
36.1
45.2
60.4
70
70
70
70
210
260
310
400
530
610
610
610
610
19.5
24.4
29.4
36.8
49.2
59.1
69.0
70
70
172
210
260
320
430
520
610
610
610
2800 4500 6000 8000 12000 17000 25000 25000 25000
15300 25000 33000 44000 66000 93000 137000 137000 137000
1760 2750 2750 2750 2750 2750 2750 2750 2750
9600 15000 15000 15000 15000 15000 15000 15000 15000
2200
490
2000
450
1700
380
1850
410
350
78
Distance from Installation Surface
➜
Static Friction
Torque
Frequency Current Input
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-47
■Product Line
●Hollow Shaft Type
Type
Product Name
Terminal Box Type 5IK100VESMT2-GHR□
Cable Type
5IK100VESM-GHR□
●Solid Shaft Type
Gear Ratio
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
List Price
$484.00
$468.00
$472.00
$479.00
$512.00
$539.00
$607.00
$461.00
$446.00
$449.00
$457.00
$490.00
$517.00
$585.00
Type
Terminal Box Type
Cable Type
Product Name
5IK100VESMT2-GAR□
5IK100VESMT2-GAL□
5IK100VESM-GAR□
5IK100VESM-GAL□
Gear Ratio
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
7.5
10, 15, 20
25, 30
40, 50
60
75, 100, 120
150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price
$449.00
$434.00
$438.00
$444.00
$479.00
$506.00
$572.00
$427.00
$412.00
$416.00
$422.00
$457.00
$484.00
$550.00
Overview,
Product
Series
Constant
Speed
Motors
Three-Phase
Induction
Motors
Single-Phase
Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-47
C-48 Three-Phase Induction Motors
■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws ➜ Page C-215
● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions.
● A number indicating the gear ratio is entered where the box □ is located within the product name.
Induction
Motors
●Terminal Box Type
◇Hollow Shaft Type
5IK100VESMT2-GHR□ Mass: 7.7 kg (16.9 lb.)
0
5 (0.20)
4 (0.16)
ϕ58−0.046
)
0.0000
(ϕ2.2835−0.0018
)
+0.21
0
+0.0083
ϕ1.0315 0.0000
+0.033
ϕ40
(ϕ1.57)
(
30 (1.18)
15 (0.59)
1.35
(0.05)
ϕ26.2
(ϕ0.9843+0.0013
0.0000)
ϕ26.2 0
(ϕ1.0315+0.0083
0.0000)
+0.033
ϕ25 0
+0.21
108 (4.25)
30 (1.18)
15 (0.59)
1.35
(0.05)
High-Efficiency
K S Series
60 W
(1/12 HP)
A1325
ϕ25 0
(ϕ0.9843+0.0013
0.0000)
Electromagnetic
Brake Motors
5 (0.20)
4 (0.16)
100 W
(1/8 HP)
A-A
76.5 (3.01)
49
(1.93)
98 (3.86)
60 W
(1/12 HP)
0
28.3 (1.11)
8
+0.040
0
(0.3150+0.0016
0.0000)
A
ϕ88 (ϕ3.46)
A
4×ϕ8.5
(ϕ0.335) Thru
0
7−0.090
10
(0.39)
0.0000
(0.2756−0.0035
)
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft)
5IK100VESMT2-GAR□ Mass: 7.7 kg (16.9 lb.)
0.0000
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
A1326
0
32±0.2
(1.260±0.008)
0
18.5−0.1
0
6−0.030
0.000
(0.728−0.004
)
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
A-A
30 max.
(1.18 max.)
0.0000
)
(
M6×12
(0.47) Deep
C-48
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
124 (4.88)
70 (2.76)
37
(1.46)
24.5 (0.96)
ϕ88 (ϕ3.46)
A
45.5
(1.79)
37
(1.46)
A
304 (11.97)
0
40±0.5
5 (0.20) (1.57±0.02)
4 (0.16)
32
(1.26)
76.5 (3.01)
37
(1.46)
90 (3.54)
40
(1.57)
76.5 (3.01)
49 (1.93)
48±1
(1.89±0.04)
0.0000
ϕ0.8661−0.0008
98 (3.86)
0
ϕ22−0.021
4 (0.16)
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
ϕ58−0.046 (ϕ2.2835−0.0018)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
23
(0.91)
BH Series
200 W
(1/4 HP)
0
40−0.3
0.000
(1.575−0.012
)
6−0.030 (0.2362−0.0012)
90 W
(1/8 HP)
21
(0.83)
37
(1.46)
37 (1.46) 37 (1.46)
90 (3.54)
21
(0.83)
ϕ62 (ϕ2.44)
8−0.036
40 W
(1/19 HP)
Safety Cover
(Included)
0.0000
(0.3150−0.0014
)
25 W
(1/30 HP)
0
124 (4.88)
70 (2.76)
45.5 (1.79)
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
15
(0.59)
15 W
(1/150 HP)
0.0000
ϕ58−0.046 (ϕ2.2835−0.0018)
304 (11.97)
40 (1.57)
6W
(1/125 HP)
76.5 (3.01)
23
(0.91)
Induction
Motors
30 max.
(1.18 max.)
ϕ40
(ϕ1.57)
4×ϕ8.5
(ϕ0.335) Thru
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-49
◇Solid Shaft Type (L shaft)
A1327
0.0000
Mass: 7.7 kg (16.9 lb.)
6−0.030 (0.2362−0.0012)
5IK100VESMT2-GAL□
76.5 (3.01)
0
18.5−0.1
0
6−0.030
0
32±0.2
(1.260±0.008)
Overview,
Product
Series
Constant
Speed
Motors
0.000
(0.728−0.004
)
0.0000
(0.2362−0.0012
)
30 max.
(1.18 max.)
Parallel Key (Included)
Three-Phase
Induction
Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
4×ϕ8.5
(ϕ0.335) Thru
A
A
76.5 (3.01)
49
(1.93)
4 (0.16)
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
Single-Phase
Induction
Motors
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
90 (3.54)
0.0000
(ϕ0.8661−0.0008
)
0
37
(1.46)
5 (0.20)
4 (0.16)
32
(1.26)
37
(1.46)
ϕ88 (ϕ3.46)
0
ϕ58−0.046
24.5 (0.96)
ϕ22−0.021
23
(0.91)
37 (1.46)
0.0000
(ϕ2.2835−0.0018
)
40±0.5 (1.57±0.02)
124 (4.88)
70 (2.76)
45.5 (1.79)
98 (3.86)
40
(1.57)
48±1
(1.89±0.04)
304 (11.97)
Low-Speed
Synchronous
Motors
M6×12
(0.47) Deep
Torque
Motors
●Cable Type
◇Hollow Shaft Type
5IK100VESM-GHR□
Mass: 7.5 kg (16.5 lb.)
A1291
98 (3.86)
49 (1.93)
304 (11.97)
21
(0.83)
28.3 (1.11)
21
(0.83)
Watertight,
Dust-Resistant
Motors
ϕ88 (ϕ3.46)
90 (3.54)
37 (1.46) 37 (1.46)
A
Accessories
5 (0.20)
4 (0.16)
)
0
ϕ58−0.046
0.0000
(ϕ2.2835−0.0018
)
32.5 (1.28)
20 (0.79)
(
0.0000
5 (0.20)
4 (0.16)
ϕ26.2
Installation
✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
+0.21
0
+0.0083
ϕ1.0315 0.0000
ϕ40
(ϕ1.57)
Brake Pack
Protective Earth Terminal M4
ϕ40
(ϕ1.57)
0
ϕ58−0.046
(
7.5 (0.30)
0.0000
ϕ2.2835−0.0018
)
0
7−0.09
0.0000
(0.2756−0.0035
)
10
(0.39)
0
15
(0.59)
0
40−0.3
0.000
(1.575−0.012
)
Linear
Heads
A
14.5
(0.57)
+0.033
0
30 (1.18)
15 (0.59)
1.35
(0.05)
A-A
ϕ62 (ϕ2.44)
4×ϕ8.5 (ϕ0.335) Thru
(0.3150 +0.0016
0.0000)
80 (3)
1000 (3.3 ft.)
(ϕ0.9843+0.0013
0.0000)
5 max.
(0.20 max.)
108 (4.25)
ϕ25
)
(
30 (1.18)
15 (0.59)
1.35
(0.05)
27
(1.06)
8−0.036 (0.3150−0.0014)
)
ϕ26.2
+0.21
0
+0.0083
ϕ1.0315 0.0000
+0.033
ϕ25 0
+0.0013
ϕ0.9843 0.0000
(
Safety Cover
(Included)
Right-Angle
Gearheads
124 (4.88)
45.5 (1.79)
70 (2.76)
37
+0.040
(1.46)
8 0
Safety Cover (Included)
CAD Data
Manuals
www.orientalmotor.com
Parallel Key (Included)
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-49
C-50 Three-Phase Induction Motors
◇Solid Shaft Type (R shaft)
15 W
(1/150 HP)
0.0000
ϕ2.2835−0.0018
32.5
(1.28)
✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
0.000
18.5−0.1 (0.728−0.004)
0
0
6−0.030
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
80 (3)
1000 (3.3 ft.)
(
0.0000
32±0.2
(1.260±0.008)
0
6−0.030
(
0
0.0000
0.2362−0.0012
Induction
Motors
4×ϕ8.5 (ϕ0.335) Thru
0
ϕ58−0.046
27
(1.06)
)
100 W
(1/8 HP)
5 max.
(0.20 max.)
14.5 (0.57)
60 W
(1/12 HP)
)
A
ϕ22−0.021 (ϕ0.8661−0.0008)
High-Efficiency
K S Series
25 W
(1/30 HP)
A
90 (3.54)
Electromagnetic
Brake Motors
304 (11.97)
124 (4.88)
45.5 (1.79)
70 (2.76)
37 (1.46)
24.5 (0.96)
ϕ88 (ϕ3.46)
32
(1.26)
48±1 (1.89±0.04)
40±0.5
(1.57±0.02)
M6×12
(0.47) Deep
20 (0.79)
Induction
Motors
A1292
37
(1.46)
98 (3.86)
49 (1.93)
5 (0.20)
4 (0.16)
4 (0.16)
6W
(1/125 HP)
Mass: 7.5 kg (16.5 lb.)
37
(1.46)
5IK100VESM-GAR□
A-A
Protective Earth Terminal M4
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
7.5 (0.30)
◇Solid Shaft Type (L shaft)
A1293
48±1 (1.89±0.04)
40±0.5 (1.57±0.02)
5 (0.20)
4 (0.16)
32
(1.26)
M6×12
(0.47) Deep
27
(1.06)
(
Protective Earth Terminal M4
20 (0.79)
7.5 (0.30)
(
0.0000
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
0.0000
ϕ0.8661−0.0008
✽Motor Cable ϕ8 (ϕ0.31)
0
80 (3)
1000 (3.3 ft.)
0
ϕ22−0.021
32.5
(1.28)
)
A
ϕ58−0.046 (ϕ2.2835−0.0018)
37
(1.46)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
A
37
(1.46)
BH Series
200 W
(1/4 HP)
ϕ88 (ϕ3.46)
90 W
(1/8 HP)
90 (3.54)
4×ϕ8.5 (ϕ0.335) Thru
4 (0.16)
98 (3.86)
49 (1.93)
14.5 (0.57)
60 W
(1/12 HP)
124 (4.88)
70 (2.76)
45.5 (1.79)
37
(1.46)
24.5 (0.96)
5 max.
(0.20 max.)
304 (11.97)
)
5IK100VESM-GAL□ Mass: 7.5 kg (16.5 lb.)
0.0000
0
6−0.030 0.2362−0.0012
40 W
(1/19 HP)
32±0.2
(1.260±0.008)
0
18.5−0.1
0
6−0.030
0.0000
(0.2362−0.0012
)
Parallel Key (Included)
0.000
(0.728−0.004
)
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
C-50
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-51
Electromagnetic Brake Type Motors
100 W (1/8 HP)
□90 mm (□3.54 in.)
Parallel Shaft Combination Type/Round Shaft Type
Overview,
Product
Series
Terminal Box Type
Cable Type
Constant
Speed
Motors
■Specifications – Continuous Rating
Product Name
Upper Level: Combination Type
Lower Level: Round Shaft Type
Terminal Box Type
Cable Type
5IK100VESMT2-□A
5IK100VA-ESMT2
5IK100VESM-□A
5IK100VA-ESM
Three-Phase
Induction
Motors
Output
Voltage
Frequency
Current
Hz
50
60
50
60
A
0.55
0.48
0.57
0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque
mN·m
850
700
850
700
oz-in
120
99
120
99
Rated Torque
mN·m
690
570
690
570
Rated Speed
oz-in
97
80
97
80
r/min
1400
1680
1400
1680
●The values in the table are characteristics for the motor only.
●No built-in overheat protection device (thermal protector).
When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Product Name
Cable Type
5IK100VESMT2-□A
5IK100VA-ESMT2
5IK100VESM-□A
5IK100VA-ESM
Reversible
Motors
Electromagnetic
Brake Motors
Clutch &
Brake Motors
●Electromagnetic Brake (Power off activated type)
Terminal Box Type
Single-Phase
Induction
Motors
Voltage
VAC
Single-Phase 220
Single-Phase 230
Frequency
Hz
50
60
50
60
Current
A
Input
W
Static Friction Torque
mN·m
oz-in
0.04
6
500
71
0.04
6
500
71
Low-Speed
Synchronous
Motors
Torque
Motors
●The values in the table are characteristics for the motor only.
Watertight,
Dust-Resistant
Motors
■Product Line
Combination
Type
Motor and gearhead are delivered pre-assembled.
The combination of motors and gearheads can be changed and they are also
available separately.
In addition, the gearhead can be removed and the assembly position can be
changed in 90˚ increments.
●Combination Type with Parallel Shaft
Type
Product Name
Terminal
Box Type
5IK100VESMT2-□A
Cable Type 5IK100VESM-□A
=
List Price
$404.00
$424.00
$434.00
$382.00
$402.00
$412.00
Type
Terminal Box Type
Cable Type
Product Name
5IK100VA-ESMT2
5IK100VA-ESM
+
Right-Angle
Gearheads
Linear
Heads
Brake Pack
●Round Shaft Type
Gear Ratio
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60
75, 90, 100, 120, 150, 180
5, 6, 7.5, 9, 12.5, 15, 18
25, 30, 36, 50, 60
75, 90, 100, 120, 150, 180
Gearhead
Motor
Combination Type
List Price
$291.00
$269.00
Accessories
The following items are included with each product.
Motor, Operating Manual
Installation
The following items are included with each product.
Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-51
C-52 Three-Phase Induction Motors
■Permissible Torque on Combination Types
●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Product Name
Induction
Motors
Electromagnetic
Brake Motors
100 W
(1/8 HP)
Induction
Motors
6W
(1/125 HP)
250
200
166
120
100
83
60
50
41
30
25
20
16.6
5
3.1
27
6
3.7
32
7.5
4.7
41
9
5.6
49
12.5
7.8
69
15
9.3
82
18
10.7
94
25
14.8
130
30
17.8
157
36
21.4
189
50
29.7
260
60
35.6
310
75
40
350
90
40
350
5IK100VESMT2-□A
5IK100VESM-□A
●60 Hz
360
300
240
200
144
120
100
72
60
50
36
30
24
20
5
2.6
23
6
3.1
27
7.5
3.8
33
9
4.6
40
12.5
6.4
56
15
7.7
68
18
8.8
77
25
12.3
108
30
14.7
130
36
17.6
155
50
24.5
210
60
29.4
260
75
34.6
300
90
40
350
Gear Ratio
5IK100VESMT2-□A
5IK100VESM-□A
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
12
Page C-19
■Starting and Braking Characteristics (Reference values - motor only)
Three-Phase 50 Hz
Three-Phase 60 Hz
Braking Time
5
3
Time [ms]
Overrun [Rotations]
150
4
100
Starting Time
50
Overrun
1
0
8.3
0
0.25
0
1
0.5
2
3
0.75
4
1
5
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
1.25
[×10-4 kg·m2]
6
7
8
[oz-in2]
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
10
100 120 150 180
40
40
40
40
350
350
350
350
➜
Page C-17
Inertia J
C-52
15
➜
2
BH Series
200 W
(1/4 HP)
18
■Permissible Inertia J of Combination
Types
200
90 W
(1/8 HP)
10
■Permissible Radial Load and Permissible
Axial Load
25 W
(1/30 HP)
60 W
(1/12 HP)
12.5
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2∼10% less, depending on the load.
●A number indicating the gear ratio is entered where the box □ is located within the product name.
15 W
(1/150 HP)
40 W
(1/19 HP)
15
100 120 150 180
40
40
40
40
350
350
350
350
Unit: Upper Values: N·m/Lower Values: lb-in
Speed
r/min
Product Name
High-Efficiency
K S Series
60 W
(1/12 HP)
300
Gear Ratio
Standard AC Motors
■Dimensions
C-53
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215
● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions.
● A number indicating the gear ratio is entered where the box □ is located within the product name.
Overview,
Product
Series
●Combination Type
◇Terminal Box Type
Gear Ratio
5IK100VESMT2-□A
5IK100VGVR-ESMT2
5GVR□A
5∼15
18∼36
50∼180
5.4
11.9
A1400A
A1400B
A1400C
Constant
Speed
Motors
Three-Phase
Induction
Motors
Applicable Cable Size
Outer Diameter
ϕ7∼ϕ13 mm
(ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
(3/4”)]
No. 12-24 UNC
12 (0.47) Deep
Single-Phase
Induction
Motors
7.5 (0.30)
(
±0.5
25±0.2
(0.984±0.008)
4×ϕ8.5 (ϕ0.335)
Thru
90
(3.54)
42±1
(1.65±0.04)
L
164
(6.46)
)
Reversible
Motors
A-A
ϕ104 ±0.02)
9
(ϕ4.0
5 (0.20)
+0.381
0
+0.015
0.106 0.000
2.692
0
A
2D CAD
40
(1.57)
[
Mass
kg lb.
4.763−0.025
ϕ88 (ϕ3.46)
A
0.0000
ϕ0.7500−0.0005
in.
1.77
2.28
2.76
90
(3.54)
25
(0.98)
0
ϕ19.050−0.013
0.0000
(ϕ1.5354−0.0010
)
34
(1.34)
18±0.5
0
ϕ39−0.025 (0.71±0.02)
87.5 (3.44)
23
(0.91)
76.5 (3.01)
30 max.
(1.18 max.)
L
mm
45
58
70
0.0000
(0.1875−0.0010
)
Gearhead Product Name
+0.040
Motor Product Name
4.763 0
(0.1875+0.0016
0.0000)
Product Name
Electromagnetic
Brake Motors
Clutch &
Brake Motors
0
4.763−0.025
0.0000
(0.1875−0.0010
)
Low-Speed
Synchronous
Motors
Parallel Key (Included)
◇Cable Type
34
(1.34)
25
(0.98)
A
0
ϕ19.050−0.013
0.0000
[ϕ0.7500−0.0005
(3/4”)]
A
25±0.2
(0.984±0.008)
90 (3.54)
Watertight,
Dust-Resistant
Motors
(
0.0000
0.1875−0.0010
)
Parallel Key (Included)
No.12-24 UNC
12 (0.47) Deep
Right-Angle
Gearheads
)
0
4.763−0.025
(
5
(0.20)
ϕ88 (ϕ3.46)
7.5
(0.30)
42±1
(1.65±0.04)
5.1
11.2
+0.040
4.763 0
+0.0016
0.1875 0.0000
L
2D CAD
A1398A
A1398B
A1398C
+0.381
0
+0.015
0.106 0.000
2.692
(
A-A
)
Linear
Heads
Brake Pack
±0.5
ϕ104 .02)
9±0
(ϕ4.0
Accessories
7.5
(0.30)
164 (6.46)
in.
1.77
2.28
2.76
0
5IK100VGVR-ESM
mm
45
58
70
0.0000
(0.1875−0.0010
)
5GVR□A
5∼15
18∼36
50∼180
4.763−0.025
Gear Ratio
Torque
Motors
Mass
kg lb.
90
(3.54)
5IK100VESM-□A
Gearhead Product Name
0.0000
(ϕ1.5354−0.0010
)
Motor Product Name
18±0.5
0
ϕ39−0.025 (0.71±0.02)
Product Name
L
20
(0.79)
80 (3)
32.5
(1.28)
4×ϕ8.5
(ϕ0.335) Thru
1000 (3.3 ft.)
✽Motor Cable ϕ8 (ϕ0.31)
27
(1.06)
14.5
(0.57)
5 max.
(0.20 max.)
Installation
Protective Earth
Terminal M4
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-53
C-54 Three-Phase Induction Motors
●Round Shaft Type
◇Terminal Box Type
87.5 (3.44)
30 max.
(1.18 max.)
0
Electromagnetic
Brake Motors
Applicable Cable Size
Outer Diameter
ϕ8∼ϕ13 mm
(ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
ϕ12−0.018
23
(0.91)
Induction
Motors
A1324
40
(1.57)
76.5 (3.01)
Mass: 3.9 kg (8.6 lb.)
0.0000
(ϕ0.4724−0.0007
)
5IK100VA-ESMT2
.5
90 (3.54)
(
60 W
(1/12 HP)
ϕ88 (ϕ3.46)
High-Efficiency
K S Series
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
)
4±0
ϕ10 ±0.02)
09
(ϕ4.
7.5 (0.30)
164 (6.46)
100 W
(1/8 HP)
4×ϕ6.5 (ϕ0.256) Thru
90 (3.54)
2 (0.08)
37±1
(1.46±0.04)
◇Cable Type
5IK100VA-ESM
Mass: 3.6 kg (7.9 lb.)
A1287
)
7.5
(0.30)
ϕ104±0 .02)
9±0
(ϕ4.0
20
(0.79)
.5
Protective Earth
Terminal M4
60 W
(1/12 HP)
90 W
(1/8 HP)
32.5
(1.28)
4×ϕ6.5 (ϕ0.256)
Thru
80 (3)
1000 (3.3 ft.)
27
(1.06)
14.5
(0.57)
40 W
(1/19 HP)
5 max.
(0.20 max.)
(
90
(3.54)
0
ϕ83−0.035
0.0000
ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
25 W
(1/30 HP)
90
(3.54)
(
15 W
(1/150 HP)
0
7.5
(0.30)
37±1
(1.46±0.04)
2
(0.08)
ϕ12−0.018
164 (6.46)
6W
(1/125 HP)
0.0000
ϕ0.4724−0.0007
)
Induction
Motors
Detail Drawing of Protective Earth Terminal
✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores
3 Motor Leads, UL Style 3271, AWG20
2 Magnetic Brake Leads, UL Style 3266, AWG22
BH Series
200 W
(1/4 HP)
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
C-54
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-55
■Connection Diagrams
●Induction Motor - Right-Angle Geared Type
Terminal Box Type
Type
Lead Wire Type
Overview,
Product
Series
R0 C0
R0 C0
L1(R)
Connection
Diagram
R0 C0
L2(S)
U
V
W
R0 C0
L1(R)
Motor
L2(S)
Red
R0 C0
White
R0 C0
L3(T)
PE
Black
L3(T)
PE
Motor
Constant
Speed
Motors
Three-Phase
Induction
Motors
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T.
Single-Phase
Induction
Motors
Note
When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Recommended electromagnetic switch ➜ Page C-57
Reversible
Motors
◇Rotation direction (as in the connection diagram above)
The rotation direction of the output shaft is as follows, depending on
the type and gear ratio.
Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
[Electromagnetic Switch]
Electromagnetic Thermal
Contact Device Relay
Hollow
Shaft Type
CCW
CW
L shaft
R shaft
R shaft
[Surge Protection]
Connect the CR circuit for surge
suppression (
).
R0=5∼200 Ω
C0=0.1∼0.2 μF 200 WV
●We also offer the EPCR1201-2 (sold
separately) as an accessory. ➜ Page C-208
L shaft
Electromagnetic
Brake Motors
Clutch &
Brake Motors
Low-Speed
Synchronous
Motors
Torque
Motors
Solid Shaft
Type
CCW
CW
Watertight,
Dust-Resistant
Motors
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the
top surface.
Right-Angle
Gearheads
●Induction Motor - Parallel Shaft Combination Type/Round Shaft Type
Type
Terminal Box Type
Lead Wire Type
R0 C0
L1(R)
Connection
Diagram
R0 C0
R0 C0
L2(S)
Linear
Heads
U
V
W
R0 C0
L1(R)
Motor
L2(S)
L3(T)
Red
White
R0 C0
Motor
PE
Black
L3(T)
PE
Brake Pack
R0 C0
Accessories
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T.
Note
When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Installation
Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above)
The rotation direction of the output shaft is as follows, depending on
the gear ratio.
60 W
(1/12 HP)
Gear Ratio: 5∼18
120∼300
Round Shaft Type
60 W
Gear Ratio: 25∼100
(1/12 HP)
100 W
(1/8 HP)
Gear Ratio: 5∼15
75∼180
Round Shaft Type
100 W
(1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch]
Electromagnetic Thermal
Contact Device Relay
[Surge Protection]
Connect the CR circuit for surge
suppression (
).
R0=5∼200 Ω
C0=0.1∼0.2 μF 200 WV
●We also offer the EPCR1201-2 (sold
separately) as an accessory. ➜ Page C-208
[Counterclockwise]
Rotation
Direction
CW
CCW
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-55
C-56 Three-Phase Induction Motors
●Electromagnetic Brake Type Motor - Right-Angle Geared Type
Terminal Box Type
Type
Cable Type
R0 C0
R0 C0
L1(R)
Induction
Motors
Electromagnetic
Brake Motors
R0 C0
R0 C0
White
L2(S)
L2(S)
Connection
Diagram
Red
L1(R)
U
V
W
MB
MB
R0 C0
L3(T)
R0
C0
SW1
High-Efficiency
K S Series
Motor
R0 C0
Black
L3(T)
Motor
PE
Orange
R0
Electromagnetic
Brake
C0
Orange
PE
Electromagnetic
Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T.
60 W
(1/12 HP)
100 W
(1/8 HP)
Note
When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above)
The rotation direction of the output shaft is as follows, depending on
the gear ratio of the types.
Induction
Motors
6W
(1/125 HP)
Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
Hollow
Shaft Type
25 W
(1/30 HP)
L shaft
R shaft
60 W
(1/12 HP)
R shaft
L shaft
[Contact Capacity of Switch SW1]
250 VAC 5 A min. (Inductive load)
(Interlocking)
CCW
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the
top surface.
●Electromagnetic Brake Type Motor - Parallel Shaft Combination Type/Round Shaft Type
Type
Terminal Box Type
Cable Type
R0 C0
R0 C0
90 W
(1/8 HP)
BH Series
200 W
(1/4 HP)
●We also offer the EPCR1201-2 (sold
separately) as an accessory. ➜ Page C-208
Solid Shaft
Type
CW
40 W
(1/19 HP)
[Surge Protection]
Connect the CR circuit for surge
suppression (
).
R0=5∼200 Ω
C0=0.1∼0.2 μF 200 WV
Electromagnetic Thermal
Contact Device Relay
CCW
CW
15 W
(1/150 HP)
[Electromagnetic Switch]
L1(R)
R0 C0
L2(S)
Connection
Diagram
U
V
W
MB
MB
R0 C0
L3(T)
R0
2-Pole,
High-Speed
60-150 W
(1/12-1/5 HP)
Red
L1(R)
C0
SW1
R0 C0
White
L2(S)
R0 C0
Motor
Black
L3(T)
Motor
PE
Orange
Electromagnetic
Brake
R0
C0
Orange
PE
Electromagnetic
Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T.
Note
When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above)
The rotation direction of the output shaft is as follows, depending on
the gear ratio.
60 W
(1/12 HP)
Gear Ratio: 5∼18
120∼300
Round Shaft Type
60 W
Gear Ratio: 25∼100
(1/12 HP)
100 W
(1/8 HP)
Gear Ratio: 5∼15
75∼180
Round Shaft Type
100 W
(1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch]
Electromagnetic Thermal
Contact Device Relay
[Surge Protection]
Connect the CR circuit for surge
suppression (
).
R0=5∼200 Ω
C0=0.1∼0.2 μF 200 WV
●We also offer the EPCR1201-2 (sold
separately) as an accessory. ➜ Page C-208
[Counterclockwise]
[Contact Capacity of Switch SW1]
250 VAC 5 A min. (Inductive load)
(Interlocking)
Rotation
Direction
CW
CCW
C-56
ORIENTAL MOTOR GENERAL CATALOG
2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30
Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-57
■Recommended Electromagnetic Switch
Always connect an electromagnetic switch when connecting the motor power supply.
Set the rated current of the motor for the stabilized current of the thermal relay.
●Mitsubishi Electric Corporation
Overview,
For 60 W (1/12 HP) motor Part number: MSO-N10 0.35 A 200 V □ Product
Series
For 100 W (1/8 HP) motor Part number: MSO-N10 0.5 A 200 V □
●Fuji Electric FA Components & Systems Co., Ltd.
For 60 W (1/12 HP) motor Part number: SC11AAN-□ 10TF
For 100 W (1/8 HP) motor Part number: SC11AAN-□ 10TH
●The winding code is specified in the box □ in the part number.
Motor Output
Power
60 W
(1/12 HP)
100 W
(1/8 HP)
Motor Rating Specifications
Voltage
Frequency Rated Current
VAC
Hz
A
50
0.37
220
60
0.33
50
0.38
230
60
0.33
50
0.55
220
60
0.48 (0.52)✽
50
0.57
230
60
0.48 (0.52)✽
●The winding name is specified in the box □ in the part number.
Winding Code
Motor Output
Power
M
60 W
(1/12 HP)
P
M
100 W
(1/8 HP)
P
✽( ) contains the value of the right-angle geared type.
Motor Rating Specifications
Voltage
Frequency Rated Current
VAC
Hz
A
50
0.37
220
60
0.33
50
0.38
230
60
0.33
50
0.55
220
60
0.48 (0.52)✽
50
0.57
230
60
0.48 (0.52)✽
Constant
Speed
Motors
Winding Name
Three-Phase
Induction
Motors
220 VAC
230 VAC
220 VAC
Single-Phase
Induction
Motors
Reversible
Motors
230 VAC
✽( ) contains the value of the right-angle geared type.
Electromagnetic
Brake Motors
■Usage with Inverter
Clutch &
Brake Motors
When using in combination with an inverter, the setting frequency conditions of the inverter are as follows.
· Right-Angle Geared Type: 80 Hz max.
· Parallel Shaft Combination Type/Round Shaft Type: 120 Hz max.
Refer to the operating manual for motor settings and precautions.
Low-Speed
Synchronous
Motors
■Combination Type – List of Combinations
Torque
Motors
The combination type comes with the motor and parallel shaft gearhead pre-assembled.
●Induction Motors
Product Name
5IK60VEST2-□A
5IK100VEST2-□A
5IK60VES-□A
5IK100VES-□A
●Electromagnetic Brake Type Motors
Motor Product Name
5IK60VGVH-EST2
5IK100VGVR-EST2
5IK60VGVH-ES
5IK100VGVR-ES
Gearhead Product Name
5GVH□A
5GVR□A
5GVH□A
5GVR□A
Product Name
5IK60VESMT2-□A
5IK100VESMT2-□A
5IK60VESM-□A
5IK100VESM-□A
Motor Product Name
5IK60VGVH-ESMT2
5IK100VGVR-ESMT2
5IK60VGVH-ESM
5IK100VGVR-ESM
Gearhead Product Name
5GVH□A
5GVR□A
5GVH□A
5GVR□A
Watertight,
Dust-Resistant
Motors
Right-Angle
Gearheads
Linear
Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data
Manuals
www.orientalmotor.com
Technical
Support
TEL: (800) 468-3982
E-mail: techsupport@orientalmotor.com
C-57