ion Metal Film
orsResistors
Make Possible
Precision Metal Film
Resistors
Precision Metal Film
Resistors
ments of MIL-R-10509
GP Series
nt coatings are standard
Meets requirements of MIL-R-10509
10 ohm
- 10 megohm
resistance range
nge tolerance
of
±0.1%
- 1%
• Meets
requirements
of
MIL-R-10509
Resistance range
tolerance
of ±0.1% - 1%
• Flame-retardant
coatings
are standard
oefficients
from ±25 to
±100ppm/°C
• 10Temperature
ohm - 10 megohm
resistance
range
coefficients from
±25 to ±100ppm/°C
egohm resistance
rangecoatings are standard
GPFlame-retardant
Series
• Resistance range tolerance of ±0.1% - 1%
• Temperature coefficients from ±25 to ±100ppm/°C
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
l Data
Electrical Data
C Power
Rating
(watts)
@
C
Resistance
Resistance
Maximum
MIL
Temperature
Maximum
Working
Reference Temperature
Coefficient
MIL
Voltage
Working
(±ppm/°C)
@
@
Reference
Coefficient
Voltage
70°C 125°C
(±ppm/°C)
IRC
Type
+1%
±.5%
±.25 and ±0.1%
+1%
±.5%
±.25 and
@
125°CGP-50 (T0)
1/8
1/10
RN50
200
100
10 - 2.37 Meg
10 ohm - 499K ohm
100 ohm - 100K ohm
GP-50 (T2)
1/8
1/10
RN50
200
50
10 ohm - 1 Meg
10 ohm - 499K ohm
100 ohm - 100K ohm
8
1/10
8
1/10
8
Tolerance & Resistance Range
Tolerance & Resistance Range
IRC Power
Rating
(watts)
RN50
GP-50 (T9)
4
1/8
4
1/8
1/10
RN50
GP-55 (T0)
1/10
1/8
1/4
RN50
1/8
1/4
1/8
GP-55 (T9)
1/4
1/8
RN55
1/2
1/4
1/2
RN55
GP-60 (T2)
GP-60 (T9)
1/2
RN50
200
200
GP-55 (T2)
GP-60 (T0)
200
RN55
200
25
50
250
RN55
250
RN55
250
250
100
RN60
350
1/4
RN60
250
350
1/4
RN60
350
100
25
50
25
100
50
100
50
25
10 - 2.37 Meg
10 ohm - 499K ohm
100 ohm -
10 ohm - 1 Meg
10 ohm - 499K ohm
100 ohm -
49.9 ohm - 499K ohm 49.9 ohm - 499K ohm
10 ohm - 10 Meg
10 ohm - 499K ohm
49.9 ohm - 499K ohm
100 ohm - 100K ohm
30 ohm - 300K ohm
49.9 ohm - 499K ohm
10 ohm - 4.99 Meg
10 ohm - 499K ohm
30 ohm - 300K ohm
30 ohm - 499K ohm
30 ohm - 499K ohm
30 ohm - 300K ohm
10 ohm - 10 Meg
10 ohm - 10 Meg
100 ohm -
10 ohm - 499K ohm
10 ohm - 499K ohm
30 ohm - 3
100 ohm - 100K ohm
ohm - 4.99 Meg
10 ohm - 499K ohm
ohm - 100K ohm
1010ohm
- 4.99 Meg
10 ohm - 100
499K
ohm
30 ohm - 3
49.9 ohm - 499K ohm 49.9 ohm - 499K ohm
100 ohm - 100K ohm
4
1/8
RN55
250
25
30 ohm - 499K ohm
30 ohm - 499K ohm
30 ohm - 3
2
1/4
RN60
350
100
10 ohm - 10 Meg
10 ohm - 499K ohm
100 ohm -
2
GeneralNote
Note
1/4General
350 without notice or liability. 50
10 ohm - 4.99 Meg
IRC reserves theRN60
right to make changes in product specification
TT Electronics reserves the right to make changes in product specification without notice or liability.
10 ohm - 499K ohm
100 ohm -
2
All information is subject to IRC’s own data and is considered accurate at time of going to print.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
plc
1/4© TT Electronics
RN60
350
25
49.9 ohm - 499K ohm
A subsidiary of
TT electronics plc
www.ttelectronicsresistors.com
GP Series Issue October 2008 Sheet 1 of 4
49.9 ohm - 499K ohm
100 ohm -
06.15
Thick Film
Metal Glaze™ Resistor
GP Series
Precision Metal Film
Resistors
Make Possible
Environmental Data
MIL-R-10509
Environmental (%∆R)
Char. C
EIA RS-196
Class 1
Typical
Char. D
Moisture Resistance
±0.5
±1.5
±0.5
±1.5
Thermal Shock
±0.25
±0.5
±0.25
-
Load life @ 70°C - 1000 hours
±0.5
±1.0
±0.5
±2.0
Shock and Vibration
±0.25
±0.5
±0.25
-
Resistance to Soldering Heat
±0.1
±0.5
±0.1
-
Terminal Strength
±0.2
±0.2
±0.2
-
Dielectric Withstand Voltage
±0.25
±0.5
±0.25
±0.5
Short Time Overload
±0.25
±0.5
±0.25
±0.5
-55°C to +165°C
-55°C to +165°C
-55°C to +165°C
Operating Temperature Range
Maximum Pulse Voltage
Insulation Resistance
GP50 400V, GP55
500V, GP60 600V
10,000 meg min.
Voltage Coefficient
100ppm/V
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
GP Series Issue October 2008 Sheet 2 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
06.15
Thick Film
Metal Glaze™ Resistor
GP Series
Precision Metal Film
Resistors
Make Possible
Physical Data
B
A
D
A
C
Dimensions (inches and (mm))
Dimension
GP50
GP55
GP60
A
1.10 ± .08 (28.0 ± 2.0)
1.10 ± .08 (28.0 ± 2.0)
1.10 ± .08 (28.0 ± 2.0)
B
0.13 + .01/-.00 (3.2 + 0.2/-0.0)
0.24 ± .01 (6.0 ± 0.3)
0.33 ± .02 (8.5 ± 0.5)
C
0.018 ± .001 (0.45 ± 0.02)
0.023 ± .002 (0.60 ± 0.05)
0.027 ± .002 (0.70 ± 0.05)
D
0.073 ± .006 (1.85 ± 0.15)
0.09 ± .01 (2.4 ± 0.2)
0.11 ± .01 (2.8 ± 0.3)
Construction
1
2
3
4
5 6
1. COLOR BANDS.
The resistors are permanently color banded for resistance value and tolerance in accordance with EIA specifications.
2. HELIXING.
The units are helixed to a predetermined base to final value ratio to obtain the best TCR, noise and stability characteristics.
3. FILM.
Metal-film resistors have a homogeneous film of metal alloy applied by vacuum deposition.
4. SUBSTRATES.
The substrates are of a proprietary non alkaline ceramic, prepared and processed under exacting conditions to guarantee the
utmost in uniformity and surface characteristics.
5. INSULATION.
The resistors are coated with multiple layers of a baked-on fire-retardant synthetic resin which provides the units with a high
degree of mechanical and electrical protection in the most adverse operating conditions.
6. TERMINATIONS.
Positive contact is provided to the resistance element by precision-made end caps. The lead wires are attached by using
proprietary welding techniques.
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
GP Series Issue October 2008 Sheet 3 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
06.15
Thick Film
Metal Glaze™ Resistor
GP Series
Precision Metal Film
Resistors
Make Possible
Ordering Data
High-Frequency Characteristics (Typical)
Sample Part No.
Ratio RF / RDC
Performance Curves
GP
55
100
1001
F
LF
LTR
IRC Type
1.0
100Ω
0.8
1KΩ
10KΩ
Size
TCR
0.6
0.4
Resistance Value
3 digit range and 1 digit multiplier
100KΩ
Tolerance
0.2
F = 1%, D = .5%, C = .25%, B = .1%
0
1
0.1
10
RoHS Compliance
100
LF = Pb-free RoHS compliant.
Frequency (MHz)
Packaging
Tape and Reel
Derating Curve (Typical)
Percent Rated Load (%)
100
80
60
40
20
0
0
20
40
60
80
100 120 140
160 180
Ambient Temperature (°C)
Current Noise (Typical)
1.0
0
GP-55
-10
GP-60
0.1
-20
0.03
-30
0.01
-40
0.003
-50
10
100
1K
10K
(db)
Ratio Rf / RDC
0.3
100K
Nominal Resistance (ohms)
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
GP Series Issue October 2008 Sheet 4 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
06.15
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TT Electronics:
GP55-25 10K 1%TR GP55-100 200 1%TR GP55-100 4.75K 1%LFT