www.sylvania.com
QUICKTRONIC® High Efficiency T8
Instant Start Systems
30-50
%
energ
savin y
gs*
H I G H E F F I C I E NC Y I NS TA NT S TA RT
T8 S Y S TE M S
Maximum efficiency, lower power
QUICKTRONIC High Efficiency QHE instant start ballasts
operate OCTRON® T8 lamps with maximum efficacy
and high lumen output, while providing 30-50% energy
savings when compared to F40T12 magnetic systems. The
QUICKTRONIC QHE energy-saving electronic T8 ballasts save
an additional 6% over standard electronic ballasts without
compromising light output or lamp life, thus allowing for a
quicker payback.
*Compared to F40T12 magnetic systems
QHE-IS: Two Lamp
Typical Savings QHE-IS: Two Lamp
Features
• Instant start, with highest ballast efficiency
– Over 90% efficient
• 6% energy savings over standard T8
electronic ballasts
• Universal input voltage
(120-277V)
• Available ballast factors:
– Low (0.78)
– Normal (0.88)
– NEW! Medium (1.00)
– High (1.15-1.20)
• New Feature – LSC (Lamp Striation Control)
– Minimize lamp striation
– Ideal for energy-saving T8
175
Light Ouput
Power Used
150
Energy Cost
125
100
24%
Savings!
75
33%
Savings!
42%
Savings!
50
25
0
Market Segments
•
•
•
•
•
•
18
Education
Healthcare
Hospitality
Institutional
Office
Retail
Mag. Ballast
w/F34T12
QHE-ISN
(0.88 BF)
w/FO32T8
QHE-ISL
(0.78 BF)
w/FO32T8
QHE-ISL
(0.78 BF)
w/FO28/XP/SS
Based on 4000 operating hours per year with energy cost of $0.10/kWh. Magnetic T12 system: ‘Energy Saving’ T12
Magnetic ballast with F34T12CW lamps. Electronic T8 systems: 0.88 & 0.78 ballast factor – High Efficiency Instant Start ballast
with FO32T8/800/XP/ECO and FO28T8/800/XP/SS/ECO lamps
www.sylvania.com
QUICKTRONIC® Professional QTP
Instant Start Ballasts
30-40
%
energ
savin y
gs*
Operate OCTRON® T8 lamps with high efficacy and high lumen output
Customers should always consider upgrading to our
High Efficiency Systems to maximize energy savings.
*Compared to F40T12 magnetic systems
QTP-IS: Two Lamp
Typical Savings QTP-IS: Two Lamp
Features
•
•
•
•
Universal input voltage (120-277V)
50% reduction in number of models
30-40% energy savings vs. magnetic systems
Available ballast factors:
– Low (0.78)
– Normal (0.88)
– High (1.18-1.20)
Market Segments
•
•
•
•
•
•
Commercial
Hospitality
Institutional
New construction
Retail
Retrofits
175
PR O F E S S I O NA L I NS TA NT S TA RT
T8 S Y S TE M S
QUICKTRONIC Professional Series products are typically used
in OEM (original equipment manufacturers) standard fixtures
and Trade/Distributor Basic stocked products for replacement.
Light Ouput
Power Used
150
Energy Cost
125
100
18%
Savings!
75
29%
Savings!
38%
Savings!
50
25
0
Mag. Ballast
w/F34T12
QTP-ISN
(0.88 BF)
w/FO32T8
QTP-ISL
(0.78 BF)
w/FO32T8
QTP-ISL
(0.78 BF)
w/FO28/XP/SS
Based on 4000 operating hours per year with energy cost of $0.10/kWh. Magnetic T12 system: ‘Energy Saving’ T12
Magnetic ballast with F34T12CW lamps. Electronic T8 systems: 0.88 & 0.78 ballast factor – Instant Start ballast
with FO32T8/800/XP/ECO and FO28T8/800/XP/SS/ECO lamps.
19
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Low Ballast Factor
High Efficiency Series
Q H E T 8 ISL
Lamp / Ballast Guide
32W T8 - OCTRON lamps
1-lamp QHE1x32T8/UNV ISL-SC
2-lamp QHE2x32T8/UNV ISL-SC
3-lamp QHE3x32T8/UNV ISL-SC
4-lamp QHE4x32T8/UNV ISL-SC
®
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
Key System Features
• H
igh Efficiency Systems over
90% efficient
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 I.S. Systems
•Universal voltage (120-277)
•Small Can enclosure size
•30-50% Energy savings
•Min. Starting Temp:
• - 20°F (-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) energy-saving electronic T8 ballasts
offer several advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low
power electronic ballasts without
compromising light output
•M
aximum energy savings when
compared to F40T12 magnetically
ballasted systems
2. Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
3. Lamp Striation Control (LSC): T8
energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems
4. New Banded Packaging
•D
istributor-friendly for easy stocking
and individual ballast sales
•R
educed waste
• E asy removable bands
•N
o tangled wires
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial
System Mean
Mean
System Type
Power System Efficacy System
Light Energy
(2-lamp)
(W)
Lumens
LPW
Lumens Output Savings
F34T12 - E.S. Magnetic Ballast
72
4660
65
3960
FO32/XP - QHE2x32T8/UNV ISL-SC
FO28/SS - QHE2x32T8/UNV ISL-SC
48
42
4680
4250
98
101
4440
3995
Baseline Baseline
112%
101%
% Relative Light Output (Mean Lumens)
120%
% System Wattage (Power)
112%
110%
100%
101%
100% 100%
90%
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
20
are ideally suited for:
•Any applications where the lowest
power T8 systems are needed for
maximum energy savings
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
80%
33%
Energy
Savings
70%
67%
60%
42%
Energy
Savings
58%
50%
40%
2-F34T12/SS
E.S. Magnetic Ballast
2-FO32/XP/ECO
QHE 2x32T8/UNV ISL
2-FO28/SUPERSAVER
QHE 2x32T8/UNV ISL
33%
42%
Low Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
High Efficiency
Comments
Performance Guide
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QHE1X32T8/UNV ISL-SC
49837
QHE2X32T8/UNV ISL-SC
49838
49863
Banded Pack
10-Pack
QHE3X32T8/UNV ISL-SC
49839
49865
Banded Pack
10-Pack
QHE4X32T8/UNV ISL-SC
49840
49867
Banded Pack
10-Pack
System
Efficacy
(lm/W)
BEF 1
0.21/0.09
0.21/0.09
0.20/0.09
0.19/0.08
0.17/0.08
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
1
1
1
1
1
0.78
0.78
0.78
0.78
0.78
2185
2340
2225
2125
1930
1965
2200
2090
2000
1815
25
25
24
22
20
87
94
93
97
97
3.12
3.12
3.25
3.55
3.90
0.41/0.18
0.41/0.18
0.38/0.16
0.35/0.15
0.32/0.14
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.78
0.78
0.78
0.78
0.78
4370
4680
4445
4250
3860
3930
4400
4180
3995
3630
48
48
45
42
38
91
98
99
101
102
1.63
1.63
1.73
1.86
2.05
0.61/0.27
0.61/0.27
0.58/0.25
0.53/0.23
0.48/0.21
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.78
0.78
0.78
0.78
0.78
6550
7020
6670
6380
5790
5895
6600
6270
5995
5445
73/72
73/72
68
63
57
90/91
96/98
98
101
102
1.08
1.08
1.15
1.24
1.37
0.80/0.35
0.80/0.35
0.75/0.32
0.71/0.31
0.62/0.27
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.78
0.78
0.78
0.78
0.78
8735
9360
8890
8500
7720
7860
8800
8360
7990
7260
95
95
89
84
76/75
92
99
100
101
102/103
0.82
0.82
0.88
0.93
1.04
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other lamp manufacturers equivalent lamp
types that meet ANSI specifications.
QHE Instant Start ballasts will operate F17,
F25 and F32 (and the SUPERSAVER® &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.78
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Red
Blue
Blue
Yellow
Red
Black/White
BALLAST
White
Blue
BALLAST
Red
Yellow
LAMP
White
White
Red
Red
CKTRONIC 2x32
BALLAST
BALLAST
Blue
LAMP
LAMP
LAMP
Blue
2 Operation below 50°F (10°C) may affect light
Blue
output or lamp operation
– see “Low Temp.
Blue
LAMP
Starting” definition.
LAM
Yellow
QT-FMapplication,
green ground wire
to terminal
required. blue lead.
Note: For Note:
threeForlamp
cap
any unused
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Black
White
Red
Dimensions:
Wiring:
Blue only
Overall: 9.5" L x 1.68" W xBlack
1.18" H
BlackLeads
Blue
Blue
LAMP
White
BALLAST
White(no connectors
Mounting: 8.90"
BALLAST provided)
Red
QUICKTRONIC 4x32
Black
White
Red
Black Blue
Blue
BlackBlue
Blue
BALLAST
White
Blue
White BALLAST
BALLAST
Red
Note: For QT-FM green ground wire to terminal required.
System Life / Warranty
Black
Blue
White
Black Blue
Blue
BALLAST
QUICKTRONIC
Blueproducts are covered by the Red
White Blue
Black BALLAST
Blue
Red
QUICK 60+®Blue
warranty,
a comprehensive
White
BALLAST Blue
Red
lamp and ballast system warranty. For
BAL
additional details, refer to the QUICK 60+
warranty bulletin.
Red
LAMP
Product Weight:
1.6
lbs
each
(approx.)
QUICKTRONIC FM (2 LAMP)
RONIC FM (1 LAMP)
Red
Mounting
Length
Height
Note: For QT-FM green ground wire to terminal required.
green ground wire to terminal required.
8.7 mm
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Slot
Note: For one lamp application, cap any blue lead. Insulate
to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 1x40DL
QUICKTRONIC 1x40DL
Item Number
BALLAST
BAL
LAMP
QUICKTRONIC 4x32
QUICKTRONIC 4x32
BALLAST
Red
Blue
Blue
Black
White
Red
Blue
Yellow
Red
LAMP
1 Outdoor
YellowRed
LAM
LAMP
Red 3 Complies with European Union Restriction
LAMP
RedLAMP
LAMP
Red
LAMP
of HazardousRed
Substances Directive (Directive QUICKTRONI
QUICKTRONIC FM (1 LAMP)
Note: For QT-FM green gro
ECground
2002/95)
LAMP
green
wire to terminal required.
QUICKTRONICNote:
FMFor(2QT-FM
LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
wire to terminal required.FM (2 LAMP)
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.FM (1 LAMP) Note: For QT-FM green ground
LAMP
LAMP cap any blue lead.
Note: For two lamp application,
LAMP
lamp
application,
cap
any
two
blue leads.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
Note:
For cap
three
lamp
cap any unused blue lead.
Insulate
to
600
volts.
For two lamp application,
two
blueapplication,
leads individually.
For
two
lamp
application,
For one lamp application,
cap two blue
leads,cap
onetwo
redblue
and leads individually.
QUICKTRONIC
3x32
For
one
lamp
application,
cap
two
one yellow lead individually. Insulate to 600 volts.blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
White
Green
Black
ALLAST
RedRed
Red
LAMP
LAMP
LAMP
LAMP
p application, cap any blue lead.
ulate to 600 volts.
Blue
LAMP
LAMP
LAMP
LAMP
LAMP
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Blue
UL Listed Class
P, Type
Blue
Blue
BALLAST
Blue
BALLAST Blue
Black
Black
BALLAST
CSA Certified
70°C Max Case Temperature
LA
LAMP
FCC 47CFR Part 18 Non-Consumer
Red
LAMP
LAMP
LA
Class
A
Sound
Rating
LAMP
LAMP
LAMP
LAMP
LAMP
LA
LAMP
RoHS
Compliant3
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
C62.41
Transient
Note: For two lamp app
Note: For one lamp ANSI
application,
capCat.
any Ablue
lead. Protection
any blue
lead.volts.
Note: For one lamp application,QUICKTRONIC
cap any blue lead. 1x32 Note: For two lamp application, cap
For one lamp applicatio
Insulate
to compatible
600
GFCI
Note: Forcap
twoany
lamp
Note:to
For
one
lamp application, cap any blueFor
lead.
QUICKTRONIC 1x32
one lamp application,
twoapplication,
blue leads.cap any blue lead.
Insulate
600
volts.
Insulate
QUICKTRONIC 1x32
For one
lamp
application,
cap any 2x32
two bluecompatible
leads.
QUICKTRONIC
Insulate to 600 volts.
Emergency
ballast
Insulate
to 600
volts.
QUICKTR
QUICKTRONIC 2x32
Insulate to 600 volts.
QUICKTRONIC 2x32
QUICKTRONIC 3x32Remote Mounting (Max. wire length from
QUICKTRONIC 3x32
ballast case to lampholder):
Black
Blue
Black
Blue
• 20 ft: full wattage T8s
White
Blue
White
White
Black
Blue
Green
BALLAS
White
Blue
White
Green
BALLAST
BALLAST
White
• 10 ft: energy saving T8s
Black
Blue
White
Blue
White
Yellow
Red
Black
Green
Black
BALLAST
Green
White
BALLAST
BALLAST
Green
Black
BALLAST
Blue
Yellow
Red
Green
Black
BALLAST
White
Yellow BALLAST
Red
BALLAST
• 4 ft: 25W energy saving T8s
Black
Yellow
Red
Black
Blue
Black/White
White
BALLAST
Blue
Black/White
Black
Blue
BALLAST
White
White
Black
White
Red
Black
White
Red
Q H E T 8 ISL
49861
Banded Pack
10-Pack
Rated Ballast Input
Lumens No. of
Factor System
Mean Power
(lm)
Lamps
(BF)
Lumens Lumens
(W)
Black
White
Red
QUICKTRONIC High
Blue
Blue
BALLAST
49838 QHE
Black Blue
Black
Efficiency White BALLAST
White
Number of Lamps
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC 2x40DL
Width
2 Blue
x 32T8 / UNVBlue
ISL - SC
Blue
BALLAST
Red
Blue
Red
Black
Case
Size
White
Black
BALLAST
Black
Starting/Ballast
Factor
White
White
BALLAST
LineYellow
Voltage (120-277V)
Yellow
Yellow
Yellow
LAMP
Specifications subject to change without notice.
LAMP
OSRAM SYLVANIA
Blue
Blue
Blue
Red
Blue
Red
BALLAST
Red
Primary LampLAMP
Wattage
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For two lamp applicatio
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL National Customer
QUICKTRONIC 3x40DL
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate
to 600 volts.
LAMP
LAMP 2x59*
QUICKTRONIC
LAMP
Blue
Blue
Red
Red
QUICKTRO
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)Black
White
www.sylvania.comYellow BALLAST
Yellow
Blue
Blue
Red
Red
21
LAMP
LAMP
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Normal Ballast Factor
High Efficiency Series
Q H E T 8 ISN
Lamp / Ballast Guide
32W T8 - OCTRON® lamps
1-lamp QHE1x32T8/UNV ISN-SC
2-lamp QHE2x32T8/UNV ISN-SC
3-lamp QHE3x32T8/UNV ISN-SC
4-lamp QHE4x32T8/UNV ISN-SC
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) energy-saving electronic T8 ballasts
offer several advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low power
Also operates:
electronic ballasts without comproFBO32, FBO31, FO25, FBO24, FO17,
mising light output
FBO16, FO30/SS (30W), FBO30/SS (30W),
•M
aximum energy savings when
FBO29/SS (29W), FO28/SS (28W) &
FO25/SS (25W)
compared to F40T12 magnetically
ballasted systems
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
2. Parallel Circuitry: keeps remaining
ballast; 3 lamps on 4L ballast
lamps lit if one or more go out.
Key System Features
• H
igh Efficiency Systems over
90% efficient
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 I.S. Systems
•Universal voltage (120-277V)
•Small Can enclosure size
•30-50% Energy savings
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
3. Lamp Striation Control (LSC): T8
energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
•Any applications where the lowest
power T8 systems are needed for
maximum energy savings
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
Lamp Striation Control (LSC)
•General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps.
22
4. New Banded Packaging
•D
istributor-friendly for easy stocking
and individual ballast sales
•R
educed waste
• E asy removable bands
•N
o tangled wires
These ballasts are also RoHS compliant
and feature lead-free solder and manufacturing process.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are also covered by the
QUICK 60+® warranty, the first and most
comprehensive lamp & ballast system
warranty in the industry.
Relative
Input
Initial
System Mean
Mean
System Type
Power System Efficacy System Light
Energy
(2-lamp)
(W)
Lumens
LPW
Lumens Output Savings
F40T12 - E.S. Magnetic Ballast
86
5795
67
4930
F34T12 - E .S. Magnetic Ballast
72
4660
65
3960
80%
16%
FO32/XP - QHE2x32T8/UNV ISN-SC
FO28/SS - QHE2x32T8/UNV ISN-SC
55
48
5280
4800
96
100
4965
4510
101%
91%
36%
44%
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems
100%
100% 100%
Baseline Baseline
101%
91%
90%
80%
36%
Energy
Savings
70%
64%
60%
44%
Energy
Savings
56%
50%
% Relative Light Output (Mean Lumens)
% System Wattage (Power)
40%
2-F40T12
E.S. Magnetic Ballast
2-FO32/XP/ECO
QHE 2x32/T8/UNV ISN
2-FO28/SUPERSAVER
QHE 2x32/T8/UNV ISN
Normal Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
High Efficiency
Comments
Performance Guide
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QHE1X32T8/UNV ISN-SC
49968
QHE2X32T8/UNV ISN-SC
49969
49853
Banded Pack
10-Pack
QHE3X32T8/UNV ISN-SC
49970
49855
Banded Pack
10-Pack
QHE4X32T8/UNV ISN-SC
49971
49857
Banded Pack
10-Pack
Input
Power
(W)
System
Efficacy
(lm/W)
BEF 1
0.25/0.11
0.25/0.11
0.22/0.09
0.21/0.09
0.19/0.09
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
1
1
1
1
1
0.88
0.88
0.88
0.88
0.88
2465
2640
2510
2400
2175
2220
2480
2360
2255
2045
28
28
26
25
22
88
94
97
96
99
3.14
3.14
3.38
3.52
4.00
0.47/0.20
0.47/0.20
0.44/0.19
0.40/0.18
0.36/0.16
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.88
0.88
0.88
0.88
0.88
4930
5280
5015
4800
4355
4435
4965
4715
4510
4095
55
55
52
48
43
90
96
96
100
101
1.60
1.60
1.69
1.83
2.05
0.69/0.30
0.69/0.30
0.66/0.28
0.61/0.26
0.55/0.23
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.88
0.88
0.88
0.88
0.88
7390
7920
7525
7195
6530
6650
7445
7075
6760
6140
83/82
83/82
78/77
72
65/64
89/90
95/97
96/98
100
101/102
1.07
1.07
1.14
1.22
1.38
0.91/0.39
0.91/0.39
0.86/0.37
0.80/0.35
0.71/0.30
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.88
0.88
0.88
0.88
0.88
9855
10560
10030
9590
8710
8870
9925
9430
9015
8190
108/107
108/107
102/101
95
85
91/92
98/99
98/99
101
102
0.82
0.82
0.87
0.93
1.04
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
Blue
Blue
LAMP
LAMP
amp application, cap any blue lead.
Insulate to 600 volts.
Blue
BALLAST
Blue
LAMP
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.88
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
Blue
Blue
Blue line (108-305V)
Blue
rated
Blue
Black
Black
BALLAST
BALLAST
Blue
BALLAST
White
White
Red
Red
Black
White
Red
Blue
Blue
Black
Blue
Black Blue
White LAMP
BALLAST
White
Red
YellowBALLAST
Red
LAMP
Red
B
Blue
Item Number
Yellowoutput
Black
White
Red
Black Blue
Blue
BlackBlue
Blue
BALLAST
White
Blue
White BALLAST
BALLAST
Red
LA
QUICKTRO
Note: For QT-FM gree
Note: For QT-FM green ground wire to terminal required.
EC 2002/95)
Blue
Black Blue
BALLAST
White Blue
Black BALLAST
Red
White
Blue Life / Warranty
System
Blue
Red
Red
Black
White
Red
B
Blue
Blue
QUICKTRONIC
BALLAST products
Blue
are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC 2x40DL
Red
QUICKTRONIC High Efficiency
Number of Lamps
Black
BALLAST
White
CaseBlack
Size
Black
White
White
BALLAST
Yellow
Starting/Ballast
Factor
Yellow
Yellow
Yellow
Line Voltage (120-277V)
Blue
Blue
Blue
Red
Blue
Red
BALLAST
Red
LAMP
LAMP
LAMP
Specifications subject to change without notice.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x59*
Primary Lamp Wattage
LAMP
LAMP
Note: For two lamp applic
QUICKTRONIC 2x40DL
OSRAM SYLVANIA
QUICKTRONIC 3x40DL
QUICKTRONIC 3x40DL
Blue
LAMP
or lamp operation – see “Low Temp.
Red
QUICKTRONIC 4x32
Blue
Blue
BALLAST
Blue
Black Blue
Black 3 xBlue
QHE
32T8 / UNVBlue
ISN - SC
BALLAST
White 49970
BALLAST
White
Red
LAMP
2 Operation below
Blue50°F (10°C) may affect light
LAMP
Mounting
Length
QUICKTRONIC 1x40DL
QUICKTRONIC 1x40DL
Black
White
Red
LA
Blue
Blue
LAMP
RedLAMP
QT-FMapplication,
green ground wire
to terminal
required. blue lead.
Note: For Note:
threeForlamp
cap
any unused
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Black
White
Red
Height
Red
8.7 mm
Wiring:
QUICKTRONIC FM (2SlotLAMP)
KTRONIC FM (1 LAMP)
Note: For QT-FM green ground wire to terminal required.
Leads only
T-FM green ground wire to terminal required.
Width
(no connectors provided)
LAMP
Blue
Yellow
LAMP
Starting” definition.Red
Red
LAMP
Red
LAMP
QUICKTRONIC
LAMP)
3 CompliesFM
with (1
European
Union Restriction
LAMP
green ground wire to terminal required.
QUICKTRONICNote:
FMFor(2QT-FM
LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
FM (2Substances
LAMP) Directive (Directive
of Hazardous
wire to terminal required.
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.FM (1 LAMP) Note: For QT-FM green ground
LAMP
lamp
application,
cap
any
two
blue leads.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
Note:
For cap
three
lamp
cap any unused blue lead.
Insulate
to
600
volts.
For two lamp application,
two
blueapplication,
leads individually.
For
two
lamp
application,
For one lamp application,
cap two blue
leads,cap
onetwo
redblue
and leads individually.
QUICKTRONIC
3x32
Forindividually.
one lamp application,
cap volts.
two blue leads, one red and
one yellow lead
Insulate to 600
one yellow lead individually. Insulate to 600 volts.
Product Weight:
1.6 lbs each (approx.)
BALLAST
BALLAST
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP cap any blue lead.
Note: For two lamp application,
LAMP
Blue
BALLAST
Blue
Blue
Blue
LAMP
QUICKTRONIC 4x32
QUICKTRONIC 4x32
Dimensions:
BALLAST
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
Blue
Blue
RedRed
Blue
White
Green
Black
BALLAST
LAMP
Black/White
BALLAST
White
LAMP
LAMP
LAMP
LAMP
UICKTRONIC 2x32
Black
White
Red
Black
White
Red
Specifications
UL Listed Class P, Type 1 Outdoor
CSA Certified
LAMP
Red
70°C
Max Case Temperature
LAMP
LAMP
LAMP
LAMP
FCC 47CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
LAMP
Class A Sound Rating
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Note: For two lamp a
Note: For one lamp
application,
cap 3any blue lead.
RoHS
Compliant
any blue
lead.volts.
Note: For one lamp application,QUICKTRONIC
cap any blue lead. 1x32 Note: For two lamp application, cap
For one lamp applic
Insulate
to 600
Note: Forcap
twoany
lamp
application,
anyAblue
lead. Protection
Note:to
For
one
lamp application, cap any blueFor
lead.
ANSI
Cat.
Transient
QUICKTRONIC 1x32
one lamp application,
two
blueC62.41
leads.cap
Insulate
600
volts.
Insula
QUICKTRONIC 1x32
For one
lamp
application, cap any 2x32
two blue leads.
QUICKTRONIC
Insulate to 600 volts.
Insulate
to 600
volts.
GFCItocompatible
QUICK
QUICKTRONIC 2x32
Insulate
600 volts.
QUICKTRONIC 2x32
QUICKTRONIC 3x32
Emergency ballast
QUICKTRONIC
3x32 compatible
Remote Mounting (Max. wire length from
Black
Blue
Black
Blue
White
Blue
White
ballast case to lampholder):
White
Black
Blue
Green
BALL
White
Blue
White
Green
BALLAST
BALLAST
White
Black
Blue
White
Blue
White
Yellow
Red
Black
Green
•
20
ft:
full
wattage
T8s
Black
BALLAST
Green
White
BALLAST
BALLAST
Green
Black
BALLAST
Blue
Yellow
Red
Green
Black
BALLAST
BALLAST
White
Yellow
Red
BALLAST
Black
Yellow
Red
• 10 ft: energy saving T8s
Black
Blue
Yellow
Red
Red
Yellow
Red
• 4 ft: 25W energy saving T8s
Red
BALLAST
Blue
Black/White
Black
Blue
BALLAST
White
White
QHE Instant Start ballasts will operate F17,
F25 and F32 (and the SUPERSAVER® &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Q HE T 8 ISN
49851
Banded Pack
10-Pack
Rated Ballast
Lumens No. of Factor System
Mean
(lm)
Lamps
(BF)
Lumens Lumens
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other lamp manufacturers equivalent lamp
types that meet ANSI specifications.
Blue
Blue
Red
Red
QUICKT
National Customer
Service and Sales Center
1-800-LIGHTBULB Black
White
(1-800-544-4828) Yellow
BALLAST
www.sylvania.com Yellow
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP 2x59*
QUICKTRONIC
LAMP
QUICKTRONIC 2x96IS
Blue
Blue
Red
Red
23
LAMP
QUICKTRONIC 2x96HO
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Medium Ballast Factor
High Efficiency Series
Q HE T 8 ISM
Lamp / Ballast Guide
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) energy-saving instant start electronic
T8 ballasts offer several advantages:
®
32W T8 - OCTRON lamps
QHE ISM SC Models
2-lamp QHE2x32T8/UNV ISM-SC
3-lamp QHE3x32T8/UNV ISM-SC
4-lamp QHE4x32T8/UNV ISM-SC
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
Medium ballast factor (1.0 BF)
•M
idrange ballast factor family when
combined with the OCTRON XPS®
(SUPER T8) lamps and the higher
efficient luminaire designs, can
reduce the number of lamps
needed to light spaces.
•W
ith a 1.0 BF, this product is ideal
for areas requiring more light with
fewer lamps.
• Maximum energy savings when
compared to F40T12 magnetically
ballasted systems
Key System Features
• H
igh Efficiency Systems over
90% efficient
• New medium ballast factor
(1.0 BF) for areas requiring more
light or fewer lamps
•RoHS compliant
•Lead free solder and manufacturing
process
•Lamp striation control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Universal voltage (120-277V)
•30-50% energy savings
•Min. starting temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for energy saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
Parallel Circuitry: keeps remaining lamps
lit if one or more go out.
­
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) ballast advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest system efficacy
• Low temperature starting capability
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
24
are ideally suited for:
•Applications requiring additional
light output
•Applications where you can reduce
lamp quantities
•Any applications where the lowest
power T8 systems are needed for
maximum energy savings
•Energy retrofits
•Commercial & retail
•Hospitality & institutional
•New construction
LSC (lamp striation control) minimizes or
eliminates striating lamps. Under certain
conditions however, T8 lamps may striate.
This condition will not affect light output
of the lamp and will not affect the ballast.
Consult lamp manufacturers for additional
details.
New Banded Packaging
•D
istributor-friendly for easy stocking
and individual ballast sales
•R
educed waste
• E asy removable bands
•N
o tangled wires
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial
Mean
Mean
Power
System
System
Light
System Type
(W)
LPW
Lumens
Output
3-Lamp System
3-FO32T8/700 lps
86
86
6655
100%
QTP3x32T8/UNV ISN-SC
%
System
Power
%
Energy
Savings
100%
Baseline
2-Lamp System
2-FO32T8/XPS lps
QHE2x32T8/UNV ISM-SC
63
98
5830
88%
73%
27%
4-Lamp System
4-FO32T8/700 lps
QTP4x32T8/UNV ISN-SC
112
88
8870
100%
100%
Baseline
3-Lamp System
3-FO32T8/XPS lps
QHE3x32T8/UNV ISM-SC
90
101
8565
97%
80%
20%
3 & 2 Lamp System Comparison
100%
90%
80%
100% 100%
4 & 3 Lamp System Comparison
100% 100%
88%
27%
Energy
Savings
97%
20%
Energy
Savings
80%
73%
70%
60%
50%
40%
% Relative Mean Light Output
% System Power
3-Lamp System
2-Lamp System
3-FO32T8/700 lps
2-FO32T8/XPS lps
QTP 3x32T8/UNV ISN-SC QHE 2x32T8/UNV ISM-SC
4-Lamp System
3-Lamp System
4-FO32T8/700 lps
3-FO32T8/XPS lps
QTP 4x32T8/UNV ISN-SC QHE 3x32T8/UNV ISM-SC
Medium Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Type
Project
Prepared by
T8 Instant Start
Comments
High Efficiency
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
Performance Guide
QHE 2x32T8/UNV ISM-SC
49248
Banded Pack
QHE 3x32T8/UNV ISM-SC
49249
Banded Pack
QHE 4x32T8/UNV ISM-SC
49491
Banded Pack
0.54/0.23
0.54/0.23
0.49/0.21
0.44/0.19
0.41/0.18
0.41/0.18
0.29/0/13
FO32/700
FO32/XPS
FO30/SS
FO28/SS
FO25/SS
FO25/XPS
FO17/XPS
2800
3100
2850
2725
2475
2200
1400
2
2
2
2
2
2
2
1.00
1.00
1.00
1.00
1.00
1.01
1.03
5600
6200
5700
5450
4950
4445
2885
5040
5830
5360
5125
4655
4175
2710
63
63
58
53
50
49
35
62
62
58
53
49
49
35
90
100
98
103
101
91
82
1.61
1.61
1.72
1.89
2.04
2.06
2.94
QHE Instant Start ballasts will operate
F17, F25 and F32 (and the SUPERSAVER®
& U-Bend equivalent) T8 lamps.
0.76/0.40
0.76/0.40
0.67/0.30
0.64/0.28
0.59/0.26
0.59/0.26
0.41/0.18
FO32/700
FO32/XPS
FO30/SS
FO28/SS
FO25/SS
FO25/XPS
FO17/XPS
2800
3100
2850
2725
2475
2200
1400
3
3
3
3
3
3
3
0.98
0.98
0.98
0.98
0.98
0.99
1.00
8230
9115
8380
8010
7275
6535
4200
7410
8565
7875
7530
6840
6140
3950
90
90
83
76
70
69
49
89
89
83
76
70
69
49
92
102
101
105
104
95
86
1.10
1.10
1.18
1.29
1.40
1.43
2.04
Specifications
1.02/0.44
1.02/0.44
0.95/0.41
0.89/0.38
0.83/0.36
0.77/0.34
0.53/0.24
FO32/700
FO32/XPS
FO30/SS
FO28/SS
FO25/SS
FO25/XPS
FO17/XPS
2800
3100
2850
2725
2475
2200
1400
4
4
4
4
4
4
4
0.98
0.98
0.98
0.98
0.98
0.99
1.00
10,975
12,150
11,170
10,680
9700
8710
5600
9880
11,425
10,500
10,040
9120
8190Red
Black
5265
122
122
114
107
99
92
64
120
120
112
105
98
91
64
91
101
100
102
99
96
Blue
88
Blue
0.82
0.82
0.88
0.93
1.00
1.09
1.56
Black/White
BALLAST
White
Blue
White
Banded Pack, (add “-B” to Description). Banded Pack contains 10 pieces each.
BALLAST
Red
1 System Efficiency is calculated on the lowest Input Power
2 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest Input Power value).
Red
Black
White
Blue
Black/White
White
Red
BALLAST
LAMP
Red
Blue
LAMP
Black
Blue
BALLAST
White
Blue
Red QUICKTRONIC 1x32
Blue
Black
Blue
BALLAST
White
Blue
Blue
BALLAST
Blue
Blue
Blue
Black
White
Yellow
Yellow
BALLAST
BALLAST
White
Green
Black
Note:
Blue
Blue
LAMP FM (2Red
QUICKTRONIC
LAMP)
LAMP
Height
8.70 mm
Slot
Black
White
Red
Red
Item Number
QUICKTRONIC 2x40DL
QUICKTRONIC High Efficiency
QUICKTRONIC
1x40DL
Number of Lamps
Blue
Mounting
Blue
Length
Blue
Black
White
Red
BALLAST
Blue
Blue
Blue
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
BALLAST Blue1x40DL
QUICKTRONIC
Black
White
BALLAST
QUICKTRONIC 2x40DL
Blue
Blue
Red
QUICKTRONIC 2x40DLLAMP
LAMP
Black
Blue
White
Blue
Yellow
BALLAST
Yellow
Red
Case Size
Starting/Ballast Factor
QUICKTRONIC
Line Voltage
(120-277V)3x40DL
Primary Lamp Wattage
BALLAST
Blue
Blue
Red
Red
QUICKTRONIC 2x59*
Black2x96IS
QUICKTRONIC
White
Blue
Blue
Blue
Blue
Blue
QUICKTRONIC products are covered by
the QUICK 60+® warranty, a comprehensive lamp and ballast system
warranty. For additional details, refer to
the QUICK 60+ warranty bulletin.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 3x40DL
Black
White
Yellow
Yellow
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
BALLAST
System Life / Warranty
Red
Note: For
application,
cap anyISM
blue lead.
Insulate to 600 volts.
49248 QHE
2 two
x lamp
32T8
/ UNV
- SC
QUICKTRONIC 3x40DL
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Blue
Blue
Specifications subject to change without notice.
Red
Black
Blue
QUICKTRONIC FM (2 LAMP)
BALLAST
BALLAST
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
BALLAST
Black
White
Red
Red
Whitegreen ground wire to terminalBlue
Note: For QT-FM
required.
Blue
Black
White
1x40DL
Yellow
Length
Blue
Black
Width White
UL Listed Class P, Type 1 Outdoor
LAMP
CSA Certified
LAMP
70°C Max Case Temperature
For two
cap any blue lead.
FCCNote:
47CFR
Partlamp
18 application,
Non-Consumer
For one lamp application, cap any two blue leads.
Class A Sound Rating
Insulate to 600 volts.
4
QUICKTRONIC
3x32
RoHS Compliant
ANSI C62.41 Cat. A Transient Protection
GFCI compatible
White
Green
BALLAST
Emergency
ballast
compatible
Black
Remote Mounting (Max. wire length
from ballast case to lampholder):
Blue
LAMP
• 20 ft: full wattage
T8s
Yellow
• 10 ft: energy saving T8s
Red
LAMP
• 4 ft: 25W energy
saving T8s
4 Complies with European Union Restriction of
Hazardous Substances Directive.
Blue
BALLAST
BALLAST
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.98 - 1.03
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:3
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Red
Blue
Low THD:Black
<10%
Blue
BALLAST
Power Factor:
White >98%
Blue
Voltage Range: ±10% of 120-277V
rated line (108-305V)
QUICKTRONIC
LAMP)
3 Operation
below 50°F (10°C) FM
may (2
affect
light
Note: For QT-FM green ground wire to terminal required.
output or lamp operation – see “Low Temp.
Starting” definition.
QUICKTRONIC FM (1 LAMP)
BALLAST
LAMP
Black
White
Red
Red
Note: For QT-FM green ground wire to terminal required.
Yellow
QUICKTRONIC 4x32
Blue
Red
LAMP
Note: For QT-FM green ground wire to terminal required.
Black
(no connectors
provided) Blue
White
Red
White
Green
Black
Note: For QT-FM green ground wire to terminal required.
Product
Weight:
QUICKTRONIC
4x32
1.6 lbs each (approx.)
BALLAST
QUICKTRONIC 3x32
LAMP
QUICKTRONIC FM (1 LAMP)
ny unused blue lead.
Overall: 9.5" LLAMP
x 1.68" W x 1.18" H
e leads individually.
Note: For
three lamp application,
.
Mounting:
8.90" cap any unused blue lead.
For two lamp application, cap two blue leads individually.
x32
Insulate to 600 volts.
Blue
Note: For two lamp application, cap any blue lead.
For one lamp application, cap any two blue leads.
Blue
Insulate to 600 volts.
For three lamp application, cap any unused blue lead.
For two lamp application, cap two blue leads individually.
Blue
LAMP
Insulate
to 600 volts.
LAMP
Red
LAMP
LAMP
QUICKTRONIC FM (1 LAMP)
LAMP
Note: For QT-FM
green ground wire to terminal required.
Dimensions:
LAMP
BALLAST
LAMP
White
Green
Black
LAMP
BALLAST
LAMP
BALLAST
White
Green
Black
Red
Red
Blue
Blue
LAMP
Red
QUICKTRONIC
3x32
LAMP 2x32
QUICKTRONIC
LAMP
Blue
Black
Wiring: White
Red
Leads only
QUICKTRONIC 2x32
Blue
For one lamp application, cap any two
blue leads.
Note: For one lampInsulate
application,
cap
any blue lead.
to 600
volts.
Insulate to 600 volts.
QUICKTRONIC
2x32
QUICKTRONIC
1x32
White
Green
Black
LAMP
Red
Blueany blue lead.
Note: For one lamp application, cap
Black
Blue
Insulate
to 600 volts.
BALLAST
White
Blue
Red
LAMP
LAMP
BALLAST
Yellow
Blueblue lead.
Note: For two lamp
application, cap any
LAMP
Yellow
Note: For one lampLAMP
application, cap any blue lead.
Insulate to 600 volts.
Red
Red
LAMP
Black
White
Complete performance data is available
in the QUICKSYSTEMS section of
the SYLVANIA Ballast Technology &
Specification Guide.
LAMP
LAMP
LAMP
LAMP
x32
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other lamp manufacturers equivalent
lamp types that meet ANSI specifications.
Q HE T 8 ISM
Initial
Input
Rated Ballast Initial
Input
System
Item
OSRAM SYLVANIA
Current
Lamp
Lumens No. of Factor System Mean
Power (W) Efficacy
Number
Description
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens Lumens 120V 277V (lm/W)1 BEF 2
OSRAM SYLVANIA
National Customer
Service and Sales Center
Blue
1-800-LIGHTBULB
Blue
BALLAST
Red
(1-800-544-4828)
Red
www.sylvania.com
LAMP
LAMP
QUICKTRONIC 2x96HO
25
www.sylvania.com
QUICKTRONIC® T8 Instant Start
UNV High Ambient Temp. Systems
Lamp Striation Control
High Ballast Factor
Q HE T 8 ISH HT
High Efficiency Series
Lamp / Ballast Guide
32W T8 - OCTRON lamps
1-lamp QHE1x32T8/UNV ISH-HT-SC
2-lamp QHE2x32T8/UNV ISH-HT-SC
3-lamp QHE3x32T8/UNV ISH-HT-SC
Also operates:
FBO32, FBO31, FO30/SS (30W), FBO30/
SS (30W), FBO29/SS (29W), FO28/SS
(28W) & FO25/SS (25W)
®
Key System Features
• H
igh Efficiency Systems over 90%
efficient
• 90°C maximum case temp.
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 PLUS Systems
•Universal voltage (120-277V)
•1.18-1.20 ballast factor
•30-50% Energy savings
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC High Efficiency
(QHE) energy-saving electronic T8 ISH
(PLUS) ballasts offer several advantages:
• S
ame Light, Less Power!
• Up to 6% in energy savings compared
to standard T8 low power electronic
ballasts without compromising light
output
•M
aximum energy savings when
compared to F40T12 magnetically
ballasted systems
• H
igh Light Output:
• Higher lumens per fixture
• F ewer fixtures required for same light
output
• Ideal for high bays
• Parallel
Circuitry: keeps remaining
lamps lit if one or more go out.
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
• Very low harmonic distortion (<10%)THD
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
•Any applications where the highest
light output for the lowest amount
of power T8 systems are needed for
maximum energy savings
• High bay lighting
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
26
• Operate at >42 kHz to reduce potential
interference with infrared control systems
• L amp Striation Control (LSC): T8 energy
saving lamps should be operated above
60°F, but under certain conditions the
lamps may striate. LSC circuitry may
minimize or eliminate this condition;
however there are limited applications
where LSC circuitry may not entirely
mitigate lamp striations. These ballasts
are also RoHS compliant and feature
lead-free solder and manufacturing
process.
• H
igh Ambient Temp: specifically
designed for those applications
where the ballast is subject to higher
ambient temperatures, such as high
bays in industrial installations.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial System Mean
Mean
System Power System Efficacy System Light Energy
Type
(W)
Lumens LPW
Lumens Output Savings
4:F34T12 - Two E.S. Magnetic Ballasts
144
9330
65
7930
4:FO32T8/700 - QTP4x32T8/UNV-ISN-SC
112
9860
89
8870
112%
22%
3:FO32/XP - QHE3x32T8/UNV-ISH-HT-SC 111/109
10620
96/97
9985
126%
23%
3:FO28/SS - QHE3x32T8/UNV-ISH-HT-SC 98/96
9650
98/101
9070
114%
32%
2:FO32/XP - QHE2x32T8/UNV-ISH-HT-SC 74/73
7200
97/99
6770
85%
49%
2:FO28/SS - QHE2x32T8/UNV-ISH-HT-SC 65/64
6540
101/102
6150
78%
55%
100%
90%
80%
70%
60%
50%
40%
% Relative Light Output
(Mean Lumens)
% System Wattage
(Power)
114%
112%
110%
100% 100%
22%
Energy
Savings
78%
Baseline Baseline
32%
Energy
Savings
85%
68%
49%
Energy
Savings
51%
4-F34T12
2-FO32/800XP
3-FO28/SUPERSAVER
4-FO32/700
Two E.S. Mag. Ballasts QTP 4x32T8/UNV ISN QHE 3x32T8/UNV ISH-HT QHE 2x32T8/UNV ISH-HT
ed
ed
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
High Efficiency
Comments
Performance Guide
High Efficiency, Lamp Striation Control, High Ambient (120-277V)
Item
OSRAM SYLVANIA
Number
Description
Input Rated Ballast Input
Current
Lamp
Lumens No. of Factor System
Mean
Power
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens Lumens
(W)
QHE1X32T8/UNV ISH-HT-SC
49496
49495
Banded Pack
10-Pack
QHE2X32T8/UNV ISH-HT-SC
49498
49497
Banded Pack
10-Pack
QHE3X32T8/UNV ISH-HT-SC
49500
49499
W
Banded Pack
10-Pack
System
Efficacy
(lm/W)
BEF 1
0.32/0.14
0.32/0.14
0.30/0.13
0.27/0.12
0.26/0.12
FO32/700
FO32/XP
FO30SS
FO28SS
FO25/SS
2800
3000
2850
2725
2475
1
1
1
1
1
1.20
1.20
1.20
1.20
1.20
3360
3600
3420
3270
2970
3025
3385
3215
3075
2790
38
38
36
33
30
88
95
95
99
99
3.16
3.16
3.33
3.64
4.00
0.65/0.28
0.65/0.28
0.59/0.25
0.55/0.23
0.50/0.22
FO32/700
FO32/XP
FO30SS
FO28SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
1.20
1.20
1.20
1.20
1.20
6720
7200
6840
6540
5940
6050
6770
6430
6150
5585
74/73
74/73
70/69
65/64
58/57
91/92
97/99
98/99
101/102
102/104
1.64
1.64
1.74
1.88
2.11
0.93/0.40
0.93/0.40
0.87/0.38
0.82/0.35
0.72/0.31
FO32/700
FO32/XP
FO30SS
FO28SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
1.18
1.18
1.18
1.18
1.18
9910
10,620
10,090
9650
8760
8920
9985
9485
9070
8235
111/109
111/109
104/103
98/96
87/86
89/90
96/97
97/98
98/101
101/102
1.08
1.08
1.15
1.23
1.37
Banded Pack Item Numbers, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
BlackBlue
Blue
Black
White
Red
Black
White
BALLAST
Red
Blue
Blue
BALLAST
Blue
Blue
Black
White
Red
Black
BALLAST
White
Red
Data based upon SYLVANIA OCTRON® lamps
shown. QUICKTRONIC® QHE Instant Start
ballasts are also compatible with other lamp
manufacturers equivalent lamp types that
meet ANSI specifications.
QHE Instant Start ballasts will operate F32
(and the SUPERSAVER® & U-Bend equivalent) T8 lamps. Complete performance
data is available in the QUICKSYSTEMS
section of the SYLVANIA Ballast Technology
& Specification Guide.
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 1.18-1.20
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Blue
Voltage Range: Blue
±10% of 120-277V
Blue
Blue
BALLAST
Blue
Blue
rated line (108-305V)
Q H E T 8 ISH HT
ue
ue
High Ballast Factor
SPECIFICATION DATA
NE
UL Listed Class P, Type 1 Outdoor
CSALAMP
Certified
High Ambient Applications:
LAMP
LAMP
LAMP
LAMP
90°C Max. Case Temp. (3 yr. warranty)
LAMP
LAMP
LAMP Ambient Applications:
LAMP
LAMP
LAMP
Standard
For one
blue lead. Insulate to 600 volts.
70°Ccap
Temp.
(5volts.
yr. warranty)
Note:
Forany
twoblue
lamplead.
application,
anyvolts.
blueCase
lead. Insulate
to 600
Note: For one lamp application,Note:
cap any
bluelamp
lead.application,
Insulate to cap
600 any
volts.
Note: For two lamp application,
cap
Insulate
to Max.
600
QUICKTRONIC 1x32
QUICKTRONIC 1x32
QUICKTRONIC 2x32
3x32
FCC 47CFR Part
18 Non-Consumer
QUICKTRONIC 2x32
QUICKTRONICQUICKTRONIC
3x32
Class A Sound Rating
RoHS Compliant3
ANSI C62.41 Cat. A Transient Protection
Blue
Black Blue Black
Blue
Black
GFCI compatible
Blue
White
Blue
White
BALLAST
White
White
White
Blue
White
Blue
Black
Green
BALLAST
White
Blue
Green
BALLAST
Green
BALLAST
Emergency ballast compatible
BALLAST
Black
Red Green Red
Yellow
BALLAST
Black
Blue
BALLAST
White
Black
Yellow
Red
BALLAST
Black
Yellow
Red
Remote Mounting (Max. wire length from
Red
Yellow
Red
ballast case to lampholder):
LAMP
Blue
LAMP
Blue
Blue • 20 ft: full wattage T8s
LAMP
LAMP
Blue
LAMP
Yellow
LAMP
LAMP
• 10 ft: energy
saving T8s
Yellow
LAMP
Red
LAMP
• 4 ft: 25W energy
saving T8s
Red
LAMP
LAMP
LAMP
LAMP
Red
LAMP
Red
LAMP
LAMP
2 Operation below 50°F (10°C) may affect light
LAMP
Note: For one lamp application, cap any blue lead. Insulate to
600 volts.
QUICKTRONIC FM (2 LAMP)
Note: For two lamp application, cap any blue lead. Insulate to 600QUICKTRONIC
volts.
FM (1 LAMP)
output or lamp operation – see “Low Temp.
FM
(2 LAMP)
LAMPQUICKTRONIC
Note:
For QT-FM
green ground wire to terminal required.
QUICKTRONIC
FMFor(1QT-FM
LAMP)
Note:
green ground wire to terminal required.QUICKTRONIC
QUICKTRONIC 2x32 LAMP
3x32
Note: For QT-FM green ground wire to terminal required.
Starting” definition.
Note: For QT-FM green ground wire to terminal required.
Red
BALLASTWhite
BALLAST
Red
LAMP
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
QUICKTRONIC 4x32
QUICKTRONIC 4x32
White
Green
Black
BALLAST
Dimensions “-SC” Small Enclosure:
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
Black Blue
Product Weight: White
BALLAST
1.6 lbs each (approx.) Red Red Height
LAMP
8.7 mm
Wiring:
Slot
QUICKTRONIC
FM (1 LAMP)
Leads only
Width
Note: For QT-FM green ground wire to terminal required.
late to 600 volts.
White
Green
Black
Black
White
Blue
Red
BALLAST
Blue
BALLAST
LAMP
Yellow
16mm
(.63 in)
Blue
Blue
Blue
Blue
System Life / Warranty
Tc Point Location
QUICKTRONIC 2x40DL
Black
Blue
Blue
Blue
White
Black
BALLAST Blue
Blue
Red
Blue BALLAST
White
Red
QHE 3Blue
x 32T8 / UNV ISH - HT
49500
BALLAST
- SC
Red
LAMP
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP
QUICKTRONIC 2x59*
Specifications subject to change without
notice.
Note: For
one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x96IS
QUICKTRONIC 2x59*
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
BALLAST
Ballast
Input End Red Blue
BALLAST
QUICKTRONIC products are covered by the
Red
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
QUICKTRONIC FM (2 LAMP)
60mm
Length
Note: For QT-FM
green ground wire to terminalBallast
required.
(2.36 in)
additional details, refer to the QUICK 60+
Output End
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application,
cap any
blue lead. Insulate to 600 volts.
warranty
bulletin.
QUICKTRONIC
3x40DL
QUICKTRONIC 1x40DL
Note: For one lamp application, cap any blueQUICKTRONIC
lead. Insulate to 600 volts. 2x40DL Note: For two lamp application, cap any
blue lead. Insulate to 600 volts.
Number of Lamps
Primary Lamp Wattage
Blue
Blue
Mounting
Length
LAMP
QUICKTRONIC 1x40DL
Black
Black
Item Number
Blue
White
White
BALLAST
Blue
QUICKTRONIC
High Efficiency
Red
Black
White
Black
Blue BALLAST
Red
White
BALLAST Blue
Blue
Red
Black
White Blue
Black
White
Red
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 3x40DL
Black
White
Case Size
Black
BALLAST
Yellow Blue
Yellow
White
High Case
Temp.
RatingBlue
BALLAST
Red
Yellow
Yellow
Starting/Ballast Factor Red
Line Voltage (120-277V)
LAMP
LAMP
LAMP
LAMP
Blue
Blue
Red
Red
QUICKTRONIC 2x96HO
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
27
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
High Ballast Factor
High Efficiency Series
Q HE T 8 ISH
Lamp / Ballast Guide
32W T8 - OCTRON® lamps
4-lamp QHE4x32T8/UNV ISH
Also operates:
FBO32, FBO31, FO30/SS (30W),
FBO30/SS (30W), FBO29/SS (29W),
FO28/SS (28W), FO25/SS (25W),
FO25 (25W) & FO17 (17W)
Key System Features
• H
igh Efficiency Systems over 90%
efficient
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 PLUS Systems
•Universal voltage (120-277V)
•1.16-1.20 ballast factor
•30-50% Energy savings
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC High Efficiency
(QHE) energy-saving electronic T8 ISH
(PLUS) ballasts offer several advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low
power electronic ballasts without
compromising light output
•M
aximum energy savings when
compared to F40T12 magnetically
ballasted systems
2. High Light Output:
• Higher lumens per fixture
• Fewer fixtures required for same
light output
3. Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
4. Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial System Mean
Mean
System Power System Efficacy System Light Energy
Type
(W)
Lumens LPW
Lumens Output Savings
4:F34T12 - Two E.S. Magnetic Ballasts
144
9330
65
7930
4:FO32T8/700 - QTP4x32T8/UNV-ISN-SC
112
9860
89
8870
112%
22%
3:FO32/XP - QHE3x32T8/UNV-ISH-SC
111/109
10620
96/97
9985
126%
23%
3:FO28/SS - QHE3x32T8/UNV-ISH-SC
98/96
9650
98/101
9070
114%
32%
% Relative Light Output (Mean Lumens)
% System Wattage (Power)
• Very low harmonic distortion (<10%) THD
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
•Any applications where the highest
light output for the lowest amount
of power T8 systems are needed for
maximum energy savings
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
28
• Operate at >42 kHz to reduce potential
interference with infrared control systems
Baseline Baseline
100%
114%
112%
110%
100% 100%
22%
Energy
Savings
90%
80%
78%
70%
32%
Energy
Savings
68%
60%
50%
40%
4-F34T12
Two E.S. Mag. Ballasts
4-FO32/700
QTP 4x32T8/UNV ISN
3-FO28/SUPERSAVER
QHE 3x32T8/UNV ISH
High Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
High Efficiency
Comments
Performance Guide
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
Item
OSRAM SYLVANIA
Number
Description
Rated Ballast Input
Lumens No. of Factor System
Mean
Power
(lm)
Lamps
(BF)
Lumens Lumens
(W)
System
Efficacy
(lm/W)
BEF 1
QHE4X32T8/UNV ISH-SC
1.24/0.53
FO32/700
2800
4
1.16
12,990
11,950
145/144
82/83
0.80
10-Pack
1.24/0.53
FO32/XP/XL
2950
4
1.16
13,690
13,140
145/144
Black
90/91
0.80
1.16
13,920
13,085
145/144
White
90/91
0.80
BALLAST
1.24/0.53
Black FO32/XP
3000
4
Replaces 49877
1.01/0.44
WhiteFO30/XP/SS
2850
4
1.16
13,225
12,430
Red
135/133
92/93
0.86
0.98/0.42
FO28/XP/XL/SS
Red
2600
4
1.16
12,065
11,460
127/124
90/92
0.91
0.98/0.42
FO28/XP/SS
2725
4
1.16
12,645
11,885
127/124
94/96
0.91
0.91/0.40
FO25/XP/SS
2500
4
1.16
11,600
10,905
108/109
0.92/0.40
FO25/XPS
2200
4
1.19
10,470
9845
109/109
96
0.64/0.29
FO17/XPS
4
1.20
6720
6315
77/77
87
BALLAST
49922
LAMP
1400
Blue
Data based upon SYLVANIA OCTRON® lamps
shown. QUICKTRONIC® QHE Instant Start
ballasts are also compatible with other lamp
manufacturers equivalent lamp types that
meet ANSI specifications.
Black
QHEBlue
Instant Start ballasts will operate
F32 Blue
(and the SUPERSAVER® & U-Bend
equivalent) T8 lamps.
101/100LAMP
1.07
1.09
LAMP
1.56
Specifications
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
QUICKTRONIC 1x32
Black
White
Blue
Blue
BALLAST
Yellow
Yellow
QUICKTRONIC
White
Green
Black
Red
Red
BALLAST
LAMP
LAMP
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 4x32
Product Weight:
1.6 lbs each (approx.)
Note: For two lamp applica
QUIC
BAL
L
LAMP
LAMP
Black
White
Red
Data based on F32T8
Starting Method: Instant Start
2x32
Ballast Factor: 1.16-1.20
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
White
60°F (16°C) for SUPERSAVER®Green
T8 lamps
Input Frequency: 50/60 Hz Black
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
Blue
rated line (108-305V)
UL Listed Class P, Type 1 Outdoor
CSA
Certified
L
Red
70°C Max Case Temperature
47CFR Part 18 Non-Consumer
QUICKTR
QUICKTRONIC FM (1FCC
LAMP)
Class A Sound Rating
Note: For QT-FM gr
Note: For QT-FM green ground wire to terminal required.
RoHS Compliant3
ANSI C62.41 Cat. A Transient Protection
Emergency ballast compatible
Remote Mounting (Max. wire length from
ballast case to lampholder):
• 20 ft: full wattage T8s
Black
• 10 ft: energy saving T8s
White
• 4 ft: 25W energy saving T8s
B
LAMP
Dimensions “-SC” Small Enclosure:
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
B
White
Red
Q HE T 8 ISH
51347
Input
Current
Lamp
(AMPS)
Type
Black
White
Red
Blue
BALLAST
2 Operation below 50°F (10°C) may affect light
BALLAST
Red
Blue
output or lamp operation – see “Low Temp.
Starting” definition.
Blue
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
Wiring:
Leads only
Mounting
Length
Height
System Life / Warranty
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
8.7 mm
Slot
Length
Width
Black
White
Item Number
QUICKTRONIC High Efficiency
Number of Lamps
BALLAST
51347 QHE 4 x 32T8 / UNV ISH -LAMP
SC
LAMP
Blue
Blue
Red
Case Size
Starting/Ballast Factor
Line Voltage
(120-277V)
Note: For one lamp application, cap any unused blue lead. Insulate
to 600 volts.
Primary Lamp Wattage
Specifications subject to change without notice.
Note: For two lamp app
QUICKTRONIC products are covered by the
QUICKTRONIC 2x40DL
QUICKT
QUICKTRONIC 1x40DL
QUICKTRONIC 2x59*
QUICKTRONIC 2x96IS
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Black
White
OSRAM SYLVANIA
BALLAST
Yellow
National Customer
Yellow
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
LAMP
www.sylvania.com
Blue
Blue
Red
Red
LAMP
29
QUICKTRONIC 2x96HO
www.sylvania.com
DOE 2011 Fluorescent Ballast Rule
QUICKTRONIC® T5, T5HO, T8 and T12 fluorescent ballasts meet requirements
Since the DOE has established new requirements for minimum ballast efficiency levels,
and these all must be met under the new
DOE regulation, the T8 NEMA Premium ballast
requirements are now obsolete and therefore
NEMA has discontinued the program as of
June 30, 2015. (See complete details at
nema.org.)
We have a full line of OSRAM SYLVANIA
QUICKTRONIC ballasts that meet these new
DOE requirements in this specification guide.
The Department of Energy (DOE) 2011 rule applies
to T5, T5HO, T8, and T12 fluorescent ballasts
manufactured on or after November 14, 2014
that operate at an input voltage at or between
120 and 277 and operate at 60Hz line frequency.
This rule also establishes a new ballast efficiency
measurement metric known as Ballast Luminous
Efficiency (BLE) as a measurement of lamp arc
power divided by input power (this replaces the
previous BEF measurement).
• Dimming ballasts that dim to 50% or lower in output power
DOE 2011 requires ballasts to meet minimum
performance criteria:
• Low frequency ballasts (magnetic) operating T8 lamps which are
designed and labeled for EMI sensitive areas and are shipped in
10 or less packs
• Must be >0.90 power factor for commercial or
>0.50 power factor for residential applications
• Programmed rapid start ballasts that operate 4’ Bi-Pin T8 lamps
operating <140mA
• Residential ballasts must meet FCC 47 CFR
part 18 consumer limits and be designed,
labeled, and marketed only for use in
residential applications
OSRAM SYLVANIA will discontinue the following magnetic sign
ballasts in response to the DOE new ballast energy guidelines.
• Sign ballasts must meet UL Type 2 rating and
be designed, labeled and marketed for use in
outdoor signs.
30
Exceptions to the rule:
Item Number
Description
48204
48205
48206
48207
48208
48209
MSB120412TP 120V
MSB240620TP 120V
MSB241224TP 120V
MSB242040TP 120V
MSB461240TP 120V
MSB462448TP 120V
www.sylvania.com
QUICKTRONIC® High Efficiency T8
Instant Start Systems
With UL Type CC, lamp striation control features
Same
less p light,
ower.
U
to 50
% en p
e
r
g
y
savin
gs.*
*Compared to T12 magnetic systems
Features
• Meets UL Type CC requirements
• LSC (Lamp Striation Control)
– Minimizes lamp striation
• -20°F (-29°C) minimum starting temperature
for OCTRON® lamps
• 60°F (16°C) minimum starting temperature
for SUPERSAVER® lamps
• Available ballast factors:
– Low (0.77)
– Normal (0.87)
– NEW! High (1.15-1.20)
Applications
• Air-handling troffers
• Commercial cabinets, coolers, display signage
• Suspended indirect luminaires
Market Segments
•
•
•
•
•
•
•
HIGH EFFICIENCY INSTANT START T8
"TYPE CC" SYSTEMS
SYLVANIA QUICKTRONIC High Efficiency, (QHE) Type CC energy
saving electronic T8 ballasts offer three major advantages: the
same light, with less power, UL Type CC compliant and Lamp
Striation Control (LSC)
Education
Healthcare
Hospitality
Industrial
Institutional
Office
Retail
Benefits
• Suitable for applications where arc reduction
circuitry is specified:
– Commercial cabinets, coolers, displays, etc.
• LSC ideal for energy-saving T8 lamps
• Facilitates energy code (W/ft2) requirements
31
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Type CC
Lamp Striation Control
Low Ballast Factor
Q HE T 8 ISL CC
High Efficiency Series
Lamp/Ballast Guide
32W T8 - OCTRON lamps
1-lamp QHE1x32T8/UNV-ISL-SC-1
2-lamp QHE2x32T8/UNV-ISL-SC-1
3-lamp QHE3x32T8/UNV-ISL-SC-1
4-lamp QHE4x32T8/UNV-ISL-SC-1
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS
(28W) & FO25/SS (25W)
Display lamps:
FO13, FO14, FO21 & FO28
Preheat lamps:
F15T8, F25T8 & F30T8
F40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
®
Key System Features
•
High Efficiency Systems over
90% efficient
•
UL Type CC Rated (Commercial
Cabinet)
•
Lamp Striation Control (LSC)
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
•Flexible De-Lamp Combinations —
see wiring diagrams on next page
•30-50% Energy savings
•RoHS compliant
•Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
High Efficiency (QHE) ballasts
are ideally suited for:
UL Type CC
•Refrigerated cases*
•Walk-in coolers*
•Commercial cabinets
•Display cases
•Applications that could expose
lamp and sockets to vibration and
potential movement
*T8 energy saving lamps should not be used
in applications below 60°F lamp ambient.
32
Lamp Striation Control, (LSC)
•General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps.
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) Type CC energy saving electronic
T8 ballasts offer four major advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low power
electronic ballasts without compromising light output
•M
aximum energy savings when
compared to F40T12 magnetically
ballasted systems
2. UL Type CC compliant: ballasts utilize a
micro-controller based circuit to reduce
arcing caused by loose connections or
improper lamp pin to socket connections.
3. Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations.
System Information
SYLVANIA QUICKTRONIC High
Efficiency (QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting
capability
• Parallel circuity - keeps
remaining lamps lit if one or
more go out
• Very low harmonic distortion
(<10%)THD
• Operate at >42 kHz to reduce
potential interference with infrared
control systems
(Please consult lamp manufacturers for
additional details.)
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
Input
Power
(W)
Initial
System
Lumens
System
Efficacy
(lm/W)
Mean
System
Lumens
Relative
Mean Light
Output
%
Energy
Savings
2-F34T12
E.S. Magnetic Ballast
72
4665
65
3965
Baseline
Baseline
2-FO32/800/XP
QHE 2x32T8/UNV ISL-SC-1
48
4620
96
4345
110%
33%
2-FO28/SS
QHE 2x32T8/UNV ISL-SC-1
42
4195
100
3945
99%
42%
System Type
(2 lamp)
% Relative Light Output
(Mean Lumens)
% System Wattage
(Power)
120%
110%
110%
100%
99%
100% 100%
90%
80%
33%
Energy
Savings
70%
67%
60%
42%
Energy
Savings
58%
50%
40%
2-F34T12
E.S. Mag. Ball.
2-FO28/SS
2-FO32/800/XP
QHE 2x32T8/UNV-ISL-SC-1 QHE 2x32T8/UNV-ISL-SC-1
Low Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Type
Project
Prepared by
T8 Instant Start
Comments
High Efficiency
High Efficiency UNV (120-277V) Type CC & Lamp Striation Control
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QHE1x32T8/UNV ISL-SC-1
Banded Pack
QHE2x32T8/UNV ISL-SC-1
49200
Banded Pack
QHE3x32T8/UNV ISL-SC-1
49367
Banded Pack
QHE4x32T8/UNV ISL-SC-1
49368
Banded Pack
Initial
System
Lumens
Mean
System
Lumens
Input
Power
(W)
System
Efficacy
(lm/W)
BEF 1
0.21/0.093
0.21/0.093
0.20/0.087
0.18/0.081
0.16/0.073
FO32/700
FO32XP
FO30SS
FO28SS
FO25SS
2800
3000
2850
2725
2475
1
1
1
1
1
0.77
0.77
0.77
0.77
0.77
2155
2310
2195
2100
1905
1940
2170
2065
1970
1790
25
25
24
22
21
86
92
91
95
91
3.08
3.08
3.21
3.52
3.67
0.40/0.18
0.40/0.18
0.38/0.17
0.35/0.16
0.31/0.14
FO32/700
FO32XP
FO30SS
FO28SS
FO25SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.77
0.77
0.77
0.77
0.77
4310
4620
4390
4195
3810
3880
4345
4125
3945
3585
48
48
45
42
38
90
96
98
100
100
1.60
1.60
1.71
1.83
2.03
0.60/0.26
0.60/0.26
0.56/0.24
0.53/0.23
0.47/0.20
FO32/700
FO32XP
FO30SS
FO28SS
FO25SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.77
0.77
0.77
0.77
0.77
6470
6930
6585
6295
5715
5820
6515
6190
5915
5375
73
73
68
64
57
89
95
96
98
100
1.05
1.05
1.13
1.20
1.35
0.81/0.35
0.81/0.35
0.76/0.33
0.71/0.31
0.63/0.27
FO32/700
FO32XP
FO30SS
FO28SS
FO25SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.77
0.77
0.77
0.77
0.77
8625
9240
8780
8395
7625
7760
8685
8250
7890
7165
96
96
90
85
76
90
96
98
99
100
0.80
0.80
0.86
0.91
1.01
QHE Instant Start ballasts will also operate
F17, F25, F32 and the U-Bend equivalent
& energy saving T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.77
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp: 2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
Blue
rated line (108-305V)
Blue
Banded Pack contains 10 pieces, (add “-B” to Description).
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Blue
Blue
LAMP
LAMP
amp application, cap any blue lead.
nsulate to 600 volts.
UICKTRONIC 2x32
Black/White
BALLAST
White
Blue
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Blue
LAMP
Black
White
Red
Black
BALLAST
Blue
Blue
Class Blue
P,Blue
Type
White
Green
Black
LAMP
Blue
Blue
LA
Blue Blue
LAMP
below 50°F (10°C) may affect light
Yellow
Red output or lamp operation – see “Low Temp.
LAMP
Red Red
LAMP
Starting” definition.
LAMP
BALLAST
Blue
Black
White
Red
QUICKTRONIC 4x32
Black
White
Red
LA
QUICKTRO
Note: For QT-FM green
of Hazardous Substances Directive (Directive
EC 2002/95)
Note: For three lamp application, cap any unused blue lead.
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Blue
System Life / Warranty
Black Blue
Blue
BALLAST
Blue
White Blue
BALLAST
QUICKTRONIC products are covered by the
Red
Black
White
Red
Black Blue
Blue
BALLAST
White Blue
Black BALLAST Blue
Blue
Red
White
BALLAST
Red
Yellow
Blue
Blue
QUICK 60+ warranty,
BALLAST Blue
Black
White
Red
BA
a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
®
Product Weight:
Red
LAMP
Mounting
Height
Length
1.6 lbs each (approx.)
mm LAMP)
QUICKTRONIC FM8.7Slot
(2
KTRONIC FM (1 LAMP)
Note:
For
QT-FM
green
ground
wire
to
terminal
required.
-FM green ground wire to terminal required.
Wiring:
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
OSRAM
SYLVANIA
Note: For two lamp application,
cap one
any lamp
blue lead.
Insulate
to 600
Note: For
application,
cap
any volts.
blue
lead. Insulate to 600 volts.
Width
Leads only (no connectors provided)
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x40DL
QUICKTRONIC QUICKTRONIC
3x40DLNational 2x40DL
QUICKTRONIC 1x40DL
QUICKTRONIC
1x40DL
Customer
QUICKTRONIC
2x40DL
QUICKTRONIC
3x40DL
QUICKTRONIC 1x40DL
Red
Item Number
Black
White
Blue QHE 2 x 32T8
Blue / UNV
49200
Black Blue
Blue
Black
BALLAST
Blue
BALLAST
White
Red
BALLAST
QUICKTRONIC High
Efficiency
White
Red
BALLAST
BA
Yellow
2 Operation
LAMP
For two
lamp
application,
blue blue
lead.lead.
Note:Note:
For three
lamp
application,
capcap
anyany
unused
Note:
For cap
three
lamp
cap any unused blue lead.
lamp
application,
cap
any
two
blueindividually.
leads.
For For
twoone
lamp
application,
two
blueapplication,
leads
For
two
lamp
application,
cap
two
Insulate
to
600
volts.
For one lamp application, cap two blue leads, one redblue
and leads individually.
Forindividually.
one lamp application,
cap volts.
two blue leads, one red and
3x32
one yellowQUICKTRONIC
lead
Insulate
to 600
one yellow lead individually. Insulate to 600 volts.
Dimensions:
Black
Blue
Black
Overall: 9.5" L x 1.68" W xWhite
1.18" H
BALLAST
White Blue BALLAST
BlueMounting: 8.90"
RedLAMP
Red
LAMP
Black
White
Red
Blue
BALLAST
Blue
White
Black
White
Red
Red
LAMP
LAMP
Red
Red
LAMP
LAMP
QUICKTRONIC QUICKTRONIC
FM (2 LAMP) FM (1 LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
FMwire(2toEuropean
LAMP)
wireFor
to terminal
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.
3 green
Crequired.
omplies
Union Restriction
LAMPFM (1 LAMP) Note: For QT-FM green ground
Note:
QT-FM
ground with
terminal required.
Note: For QT-FM green ground wire to terminal required.
Note: For QT-FM green ground wire to terminal required.
LAMP
QUICKTRONIC 4x32
QUICKTRONIC 4x32
BALLAST
Blue
Blue
Blue
ULBALLAST
Listed
1 Outdoor
Blue
UL Type CC Rated
BALLAST
BALLAST
Red
Red
CSA Certified
LAMP
Red
LAMP
70°C Max Case Temperature
LAMP
LAMP
LAMP
LAMP
FCCLAMP
47 CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
LAMP
LAMP
Class
A Sound Rating
LAMP
LAMP
LAMP
Note: For two lampNote:
application,
anyapplication,
blue
lead. cap3 any blue lead.
Note: For one lamp application, cap any blue lead.
Note: For two lamp a
Fortwo
onecap
lamp
RoHS
Compliant
Note:
For
lamp
application,
cap any blue lead.
Note:
For
one
lamp
application,
cap
any
blue
lead.
QUICKTRONIC 1x32
cap any Insulate
two bluetoleads.
Insulate to 600 volts.
QUICKTRONIC 1x32 For one lamp application,
For one lamp applica
600any
volts.
QUICKTRONIC 1x32
For one
lamp
application,
cap
two
leads. Protection
Insulate to 600 volts.
ANSI 62.41
Cat.
A blue
Transient
Insulate
to 600
volts.
Insula
QUICKTRONIC 2x32
Insulate to 600 volts.
QUICKTRONIC
2x32
QUICKTRONIC 2x32
GFCI compatible
QUICKTRONIC 3x32
QUICK
QUICKTRONIC 3x32
Emergency ballast compatible
Remote Mounting (Max. wire length from
Black
Blue
Black
Blue
Black
Blue
White
Blue
White
White
Blue
White
ballast case to lampholder):
White
White
White
Blue
White
Green
BALLAST
Green
BALL
Green
White
BALLAST
Green
BALLAST
BALLAST
Green
Black
BALLAST
BALLAST
Black
Blue
Yellow
Red
Green
Black
• 20 ft: full wattage T8s
Yellow BALLAST
Red
Black
Black
BALLAST
Black
Yellow
Red
Black
Blue
Yellow
Red
BALLAST
White
Yellow
Red
•
10
ft:
energy
saving
T8s
Yellow
Red
Blue
Red
• 4 ft: 25W energy saving T8s
Black/White
White
BALLAST
Blue
Black
Blue
BALLAST
Black/White
White
BALLAST
White
Red
Black
White
Red
Q H E T 8 ISL CC
49199
Rated Ballast
Lumens No. of Factor
(lm)
Lamps
(BF)
Performance Guide
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other manufacturers equivalent lamp types
that meet ANSI specifications.
Blue
Blue
Number of Lamps
ISLBlue
- SC - 1
Blue
Red
Primary Lamp Wattage
UL Type CC
Black
Black
Black
Case
Size BALLAST
White
White
White
BALLAST
Yellow
Starting/Ballast
Factor
Yellow
Yellow
Yellow
Line Voltage (120-277V)
LAMP
Specifications subject to change without notice.
LAMP
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP
LAMP
LAMP
LAMP
Blue
Blue
Blue
Blue
Red
Red
BALLAST
Red
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP
Blue
Blue
Red
Red
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
Black
www.sylvania.com White
Yellow
Yellow
Note: For two lamp applic
QUICKTR
Blue
Blue
Red
Red
BALLAST
33
LAMP
LAMP
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Type CC
Lamp Striation Control
Normal Ballast Factor
QHE T8 ISN CC
High Efficiency Series
Lamp/Ballast Guide
32W T8 - OCTRON® lamps
1-lamp QHE1x32T8/UNV-ISN-SC-1
2-lamp QHE2x32T8/UNV-ISN-SC-1
3-lamp QHE3x32T8/UNV-ISN-SC-1
4-lamp QHE4x32T8/UNV-ISN-SC-1
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
Display lamps:
FO13, FO14, FO21 & FO28
Preheat lamps:
F15T8, F25T8 & F30T8
F40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
Key System Features
•
High Efficiency Systems over
90% efficient
•
UL Type CC Rated (Commercial
Cabinet)
•
Lamp Striation Control (LSC)
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving T8
lamps
• 0 °F (-18°C) for FO40T8 lamps
•Flexible De-Lamp Combinations —
see wiring diagrams on next page
•QHE ballasts meet the most
demanding utility rebate standards
•30-50% energy savings
•RoHS compliant
•Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
High Efficiency (QHE) ballasts
are ideally suited for:
UL Type CC
•Refrigerated cases*
•Walk-in coolers*
•Commercial cabinets
•Display cases
•Applications that could expose lamp
and sockets to vibration and potential
movement
*T8 energy saving lamps should not be used in
applications below 60°F lamp ambient.
34
Lamp Striation Control (LSC)
•General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps.
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) Type CC energy saving electronic
T8 ballasts offer four major advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low power
electronic ballasts without compromising light output
•M
aximum energy savings when
comparedto F40T12 magnetically
ballasted systems
2. UL Type CC compliant: ballasts utilize a
micro-controller based circuit to reduce
arcing caused by loose connections or
improper lamp pin to socket connections.
3. Lamp Striation Control (LSC): T8
energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry
may not entirely mitigate lamp striations.
System Information
SYLVANIA QUICKTRONIC High
Efficiency (QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting
capability
• Parallel circuity - keeps remaining
lamps lit if one or more go out
• Very low harmonic distortion
(<10%)THD
• Operate at >42 kHz to reduce
potential interference with infrared
control systems
(Please consult lamp manufacturers
for additional details.)
These ballasts are also RoHS compliant
and feature lead-free solder and manufacturing process.
Mean
System
Lumens
Lamp &
System
Initial @ 8000
Ballast Type
Watts
LPW
Hours
Relative
%
Light Lamp
Output
%
Life
@ 8000
Energy
@3hrs/
Hours
Savings
start
2-FO32/700
QTP2x32T8/UNV ISN-SC
59
84
4435
Baseline
Baseline
Baseline
2-FO32/800/XP
QHE2x32T8/UNV ISN-SC-1
55
95
4905
112%
7%
160%
2-FO30/SS
QHE2x32T8/UNV ISN-SC-1
52
95
4660
106%
12%
160%
2-FO28/SS
QHE2x32T8/UNV ISN-SC-1
48
99
4455
102%
19%
160%
2-FO25/SS
QHE2x32T8/UNV ISN-SC-1
44
98
4050
92%
25%
160%
% Relative Light Output
% System Wattage
120%
100%
100% 100%
112% 7%
Energy
Savings
93%
106%
12%
Energy
Savings
88%
80%
102%
19%
Energy
Savings
81%
92% 25%
Energy
Savings
75%
60%
40%
20%
0%
2-FO32/700
QTP 2x32T8/UNV ISN-SC
2-FO32/800/XP
2-FO30/SS
2-FO28/SS
2-FO25/SS
QHE 2x32T8/UNV ISN-SC-1 QHE 2x32T8/UNV ISN-SC-1 QHE 2x32T8/UNV ISN-SC-1 QHE 2x32T8/UNV ISN-SC-1
Normal Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Type
Project
Prepared by
T8 Instant Start
Comments
High Efficiency
High Efficiency UNV (120-277V) Type CC & Lamp Striation Control
Performance Guide
Item
Number
Description
Input Rated Ballast
Input
Current
Lamp Lumens No. of
Factor System
Mean
Wattage
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens
Lumens
(W)
QHE1x32T8/UNV-ISN-SC-1
Banded Pack
QHE2x32T8/UNV-ISN-SC-1
49383
Banded Pack
QHE3x32T8/UNV-ISN-SC-1
49385
Banded Pack
QHE4x32T8/UNV-ISN-SC-1
49387
Banded Pack
BEF1
0.25/0.11
0.25/0.11
0.23/0.09
0.21/0.09
0.20/0.09
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
1
1
1
1
1
0.87
0.87
0.87
0.87
0.87
2435
2610
2480
2370
2155
2190
2455
2330
2230
2025
28
28
27/26
25/24
23/22
87
93
92/95
95/99
94/98
3.11
3.11
3.35
3.63
3.95
0.47/0.20
0.47/0.20
0.44/0.19
0.40/0.18
0.37/0.16
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.87
0.87
0.87
0.87
0.87
4870
5220
4960
4740
4305
4385
4905
4660
4455
4050
55
55
52
48/47
44/43
89
95
95
99/101
98/100
1.58
1.58
1.67
1.85
2.02
0.68/0.30
0.68/0.30
0.65/0.28
0.61/0.26
0.55/0.23
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.87
0.87
0.87
0.87
0.87
7305
7830
7440
7110
6460
6575
7360
6990
6685
6070
82/81
82/81
77/76
72/71
65/64
89/90
96/97
97/98
99/100
99/101
1.07
1.07
1.14
1.23
1.36
0.92/0.39
0.92/0.39
0.86/0.37
0.80/0.35
0.74/0.31
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.87
0.87
0.87
0.87
0.87
9745
10,440
9920
9485
8615
8770
9815
9325
8915
8095
109/107
109/107
102
95/94
87/86
89/91
96/98
97
100/101
99/100
0.81
0.81
0.85
0.93
1.01
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other manufacturers equivalent lamp types
that meet ANSI specifications.
QHE Instant Start ballasts will also operate
F17, F25, F32 and the U-Bend equivalent
& energy saving T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.87
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp: 2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V rated
Blue
line (108-305V)
Banded Pack contains 10 pieces, (add “-B” to Description).
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Blue
Black
Black/White Blue
BALLAST
White
White BALLAST
BALLAST
Red
Red
Black
White
Red
BALLAST
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
mp application, cap any blue lead.
sulate to 600 volts.
BlueLAMP
LAMP
LAMP
BALLAST
Blue
Dimensions:
Overall: 9.5" L x 1.68"Black
W x 1.18" H Black Blue
White
BALLAST
Mounting: 8.90"
White Blue
LAMP
Red
Product Weight:
1.6 lbs each (approx.)
Red
LAMP
Black
White
Red
Blue
Black
White
BA
Black
Black Blue
BALLAST
Blue
White
Black BALLAST
Red
White
Blue
Blue
Blue
EC 2002/95)
System Life / Warranty
Black
Blue
Black Blue
Blue
QUICKTRONIC
products are covered by the White
BALLAST
Blue
White Blue
Red
BALLAST ®
QUICK 60+ Blue
warranty, a comprehensive
Black
Red
Blue
White
lamp and ballast
BALLAST
Bluesystem warranty. For
Red
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC 2x40DL
Red
Number of Lamps
Primary Lamp Wattage
OSRAM SYLVANIA
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For two lamp applicat
QUICKTRONIC QUICKTRONIC
3x40DLNational2x40DL
Customer
QUICKTRONIC
3x40DL
Blue
UL Type CC
Black
Blue
Black
Blue
BALLAST
White
Black
Case
Size
Blue
White
Red
White
BALLAST
Red
Yellow
Starting/Ballast
Factor
BALLAST
Yellow
Red
Yellow
Yellow
Line Voltage (120-277V)
LAMP
BA
additional details, refer to the QUICK 60+
warranty bulletin.
BALLAST
Note: For
application,
any volts.
blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any
blue lead. Insulate to 600 volts.
Note: For two lamp application,
cap one
any lamp
blue lead.
Insulatecap
to 600
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Blue
Specifications subject to change without notice.
Black
White
Red
Note: For QT-FM green ground wire to terminal required.
8.7 mm
Slot
LAMP
LAM
Blue
Blue 50°F (10°C) may affect light
2 Operation below
LAMP
Mounting
Length
Height
49383 QHE 2 Blue
x 32T8 / UNV Blue
ISN - SC - 1
Black Blue
BALLAST
Blue
Black
BALLAST
Blue
QUICKTRONIC Red
High EfficiencyWhite Blue
BALLAST
White
Red
Item NumberWhite
Blue
output or lamp
operation – see “Low Temp.
Yellow
Red LAMP
Red
Starting” definition.
Red
QUICKTRONIC 4x32
Red
Width
QUICKTRONIC 1x40DL
QUICKTRONIC 1x40DL
BALLAST
Blue
Blue
Blue
Yellow
Note: For QT-FM green ground wire to terminal required.
Red
Yellow
Red
LAMP
Blue
Note: For three lamp application, cap any unused blue lead.
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
BALLAST
QUICKTRONIC FM (2 LAMP)
TRONIC FM (1 LAMP) Wiring:
Note: For QT-FM green ground wire to terminal required.
M green ground wire to terminal required.
Leads only (no connectors
provided)
Blue
Blue
Blue
BALLAST
Blue
UL Listed
White
White
Red
Red
LAMP
LAMP
LAMP
LAMP
Note: For two lamp application, cap any
blue lead.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
lamp
application,
cap
any
two
blue leads.
Note:
For cap
three
lamp
application,
cap any unused blue lead.
For two lamp application,
two
blue
leads
individually.
Insulate
to 600application,
volts.
For
two
lamp
For one lamp application, cap two blue leads,cap
onetwo
redblue
and leads individually.
Forindividually.
one lamp application,
cap volts.
two blue leads, one red and
3x32
one yellowQUICKTRONIC
lead
Insulate
to 600
one yellow lead individually. Insulate to 600 volts.
White
Green
Black
Blue
Blue
Blue
LAM
LAMP
Red
LAMP
Red
LAMP
LAMP
QUICKTRON
3 CompliesFM
with(1European
LAMP)Union Restriction
QUICKTRONIC QUICKTRONIC
FM (2 LAMP)
QUICKTRONIC FM (1 LAMP)
Note: For QT-FM green g
QUICKTRONIC
FMwire(2to LAMP)
LAMPFM (1 LAMP) Note: For QT-FM green ground
Note:
QT-FM green
ground
terminal required.
wireFor
to terminal
required.
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.
of Hazardous Substances Directive (Directive
LAMP
QUICKTRONIC 4x32
QUICKTRONIC 4x32
BALLAST
Black
BALLAST
Black
Red
Class Blue
P, Type 1 Outdoor
BALLAST Blue
Black/White
Blue
Black/White
UL Type CC Rated
White
Blue
BALLAST
White
CSA Certified
BALLAST
Red
L
LAMP
Red
LAMP
70°C
Max Case Temperature
LAMP
L
LAMP
LAMP
FCC
47
CFR
Part
18
Non-Consumer
LAMP
LAMP
LAMP
L
LAMP
LAMP
Class A Sound Rating
LAMP
LAMP
LAMP
LAMP
LAMP
3
Note: For two lamp ap
RoHS
For onecap
lamp
application,
Note: For two lampNote:
application,
any
blue Compliant
lead. cap any blue lead.
Note: For one lamp application, cap any blue lead.
Note: Forcap
twoany
lamp
application,
cap any blue lead.
Note:to
For
one
lamp application, cap
any blueFor
lead.
QUICKTRONIC
1x32
For one lamp applicat
Insulate
600 volts.
QUICKTRONIC 1x32
one lamp application,
twoANSI
bluetoleads.
Insulate
600
volts.
62.41
Transient
QUICKTRONIC 1x32
For one
lamp
application,
cap anyCat.
two A
blue
leads. Protection
Insulate to 600 volts.
Insulate
Insulate
to 600
volts.
QUICKTRONIC
2x32
QUICKTRONIC 2x32
Insulate
to 600
volts.
GFCI
compatible
QUICKTRONIC 2x32
QUICKT
QUICKTRONIC 3x32
QUICKTRONIC
3x32
Emergency ballast compatible
Remote Mounting (Max wire length from
Black
Blue
Black
Blue
Black
Blue
ballast case to lampholder):
White
Blue
White
White
Blue
White
White
White
Green
BALLA
White
Blue
White
Green
BALLAST
Green
BALLAST
Green
White
BALLAST
BALLAST
• 20 ft: full wattage T8s
Black
Blue
BALLAST
Green
Black
Yellow BALLAST
Red
Black
BALLAST
Black
Yellow
Red
Green
Black
BALLAST
Black
Blue
Yellow
Red
Black
BALLAST
White
Yellow
Red
Yellow
Red
• 10 ft: energy saving T8s
Blue
Yellow
Red
Red
• 4 ft: 25W energy saving T8s
Blue
Blue
CKTRONIC 2x32
Black
White
Red
QHE T8 ISN CC
49381
System
Efficacy
(lm/W)
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
QUICKTRONIC 2x59*
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Blue
Blue
Red
Red
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828) Black
www.sylvania.com White
Yellow
Yellow
QUICKTR
BALLAST
Blue
Blue
Red
Red
35
LAMP
LAMP
www.sylvania.com
QUICKTRONIC® T8 Instant Start
UNV High Ambient Temp. Systems
Type CC
Lamp Striation Control
High Ballast Factor
QHE T8 ISH CC HT
High Efficiency Series
Lamp / Ballast Guide
®
32W T8 - OCTRON lamps
2-lamp QHE2x32T8/UNV-ISH-HT-SC-1
4-lamp QHE4x32T8/UNV-ISH-HT-1
Also operates:
FBO32, FBO31, FO30/SS (30W), FBO30/
SS (30W), FBO29/SS (29W), FO28/SS
(28W) & FO25/SS (25W), FO25, FBO24,
FO17 & FBO16 lamps
Key System Features
•
High Efficiency Systems over
90% efficient
•
UL Type CC Rated (Commercial Cabinet)
•
Lamp Striation Control (LSC)
•Min. Starting Temp:
• - 20°F(-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving T8
lamps
• 90°C maximum case temperature
•QHE ballasts also meets the most
demanding utility rebate standards
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) Type CC energy saving electronic
T8 ballasts offer seven major advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard efficiency
T8 electronic ballasts without
compromising light output
• 5 0% energy savings when
compared to typical magnetically
ballasts 400 metal halide systems
2. High Light Output:
•H
igher lumens per fixture
• F ewer fixtures required for same
light output
• Ideal for high bays
3. UL Type CC compliant: ballasts
utilize a micro-controller based circuit
to reduce arcing caused by loose
connections or improper lamp pin
to socket connections.
4. Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
System Information
5. High Ambient Temperature:
specifically designed for those applications where the ballast is subject to
higher ambient temperatures, such
as high bays in industrial installations.
6. Available in 2 & 4-lamp models
which allows great flexibility for
various light levels in high bay
applications to replace HID or
T12HO lighting applications.
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
%
Lamp
Input Mean
Relative
%
Life
Lamp &
Power Initial
Fixture*
Fixture*
Energy
@3hrs/
Ballast Type
(W)
LPW
Lumens
Output
Savings
start
Application Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
SYLVANIA QUICKTRONIC
High Efficiency (QHE) ballasts
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
M400/U
Magnetic Ballast
452
61
17,784
Baseline
Baseline
Baseline
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
• Parallel circuity - keeps remaining
lamps lit if one or more go out
3-F96T12HO
Magnetic Ballast
360
58
16,875
95%
20%
60%
6-FO32/800/XPS
1-QHE2x32 ISH-HT-SC
1-QHE4x32 ISH-HT-SC
214
100
17,238
97%
53%
200%
are ideally suited for:
UL Type CC
•Refrigerated cases*
•Walk-in coolers*
•Commercial cabinets
•Display cases
•Applications that could expose lamp
and sockets to vibration and potential
movement
Lamp Striation Control, (LSC)
•General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps.
High bay
Warehouses
36
not entirely mitigate lamp striations.
(Please consult lamp manufacturers for
additional details.)
*T8 energy saving lamps should not be used in
applications below 60°F lamp ambient.
• Very low harmonic distortion
(<10%) THD
• Operate at >42 kHz to reduce potential
interference with infrared control
systems
*Based on Fixture Efficiency: 76% for M400/U and 85% for T12HO and FO32T8 lamps.
High Bay Comparison
100%
100% 100%
90%
80%
95% 20%
Energy
Savings
80%
97%
% Relative Fixture
Light Output
% System Power
53%
Energy
Savings
70%
60%
47%
50%
40%
M400/U
Mag. Ballast
3-F96T12HO
Mag. Ballast
6-FO32/800/XPS/ECO
1-QHE 2x32T8/UNV ISH-HT-SC
1-QHE 4x32T8/UNV ISH-HT-SC
NE
W
Catalog #
Date
Project
Prepared by
High Efficiency
Performance Guide
High Efficiency Type CC, Lamp Striation Control, High Ambient (120-277V)
Item
OSRAM SYLVANIA
Number
Description
QHE2x32T8/UNV ISH-HT-SC-1
49783 b Banded Pack
QHE4x32T8/UNV ISH-HT-1
49787 b Banded Pack
System1
Efficacy
(lm/W)
BEF2
73
73
69
64
57
56
40
91
100
97
100
102
93
84
1.62
1.62
1.71
1.84
2.07
2.13
3.00
141
141
133
124
Blue
111
109
77
91
101
99
101
103
96
87
0.82
0.82
0.86
0.93
1.04
1.09
1.56
Input RatedBallast
Input
Current
Lamp Lumens No. of Factor System
Mean
Power
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens Lumens 120V 277V
0.63/0.28
0.63/0.28
0.59/0.25
0.55/0.23
0.50/0.22
0.47/0.21
0.34/0.15
FO32/700
FO32/XPS
FO30/SS
FO28/SS
FO25/SS
FO25/XPS
FO17/XPS
2800
3100
2850
2725
2475
2200
1400
2
2
2
2
2
2
2
1.18
1.18
1.18
1.18
1.18
1.19
1.20
6610
7315
6725
6430
5840
5235
3360
5945
6875
6320
6045
5490
4920
3160
1.22/0.52
1.22/0.52
1.13/0.49
1.06/0.46
0.94/0.41
0.92/0.40
0.64/0.29
FO32/700
FO32/XPS
FO30/SS
FO28/SS
FO25/SS
FO25/XPS
FO17/XPS
2800
3100
2850
2725
2475
2200
1400
4
4
4
4
4
4
4
1.15
12,880
1.15
14,260
1.15
13,110
1.15 Black
12,535
1.15White
11,385
1.19 Red
10,470
1.20
6720
74
74
70
65
58
57
40
11,590
144
13,405
144
12,325
135
11,785
127
10,700
112
BALLAST
9845
109
6315
77
Banded Pack Item Numbers (add “-B” to Description). Banded Pack contains 10 pieces.
1 System Efficacy calculation based on lowest input power value
2 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest power value).
LAMP
b Preliminary specifications. Please contact OSRAM SYLVANIA for additional information.
Black
Blue
Black White
Blue
BALLAST
White
BALLAST
Blue
Red Yellow
Yellow
Blue
Blue
BALLAST
Blue
Blue
Red
Red
LAMPLAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x32
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
LAMP
QUICKTRONIC
3x32
QUICKTRONIC 2x32
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 4x32
QUICKTRONIC 4x32
White
Green
Black
White
Green
Black
BALLAST
Dimensions “-SC” Small Enclosure:
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
Product Weight:
1.6 lbs each (approx.)
LAMP
Blue
Mounting
Height
Length
Wiring: QUICKTRONIC
FM (1 LAMP)
Leads onlyNote: For8.7QT-FM
mm
green ground wire to terminal required.
Slot
sulate to 600 volts.
Width
Length
Ballast Factor: 1.15-1.20
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7 LAMP
Starting Temp: 3
-20°F (-29°C) for OCTRON LAMP
T8 lamps;
60°F (16°C) for SUPERSAVER T8 lamps
Note: For one lamp application, cap any blue lead. Insulate to 60
Input Frequency: 50/60 Hz
QUICKTRONIC 2x32
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
UL Listed Class P, Type 1 Outdoor
UL Type CC Rated
White
GreenCSA Certified
BALLAST
BlackHigh Ambient Applications:
90°C Max. Case Temp. (3 yr. warranty)
Standard Ambient Applications:
70°C Max. Case Temp. (5 yr. warranty)
Blue
FCC 47 CFR Part 18 Non-Consumer
Class A Sound Rating
RoHS Compliant4
Red
LAMP
ANSI 62.41 Cat. A Transient Protection
GFCI compatible
QUICKTRONIC FM (1 LAMP)
Emergency ballast compatible
Note: For QT-FM green ground wire to terminal required.
Remote Mounting (Max wire length from
ballast case to lampholder):
• 20 ft: full wattage T8s
• 10 ft: energy saving T8s
• 4 ft: 25W energy saving T8s
4 Complies with European Union Restriction
Black
of Hazardous
Substances Directive (Directive
EC 2002/95)
White
Dimensions Standard Enclosure (4L):
Overall: 9.5" LBlack
x 2.38"
W x 1.6" H
Blue Blue
LAMP
Mounting: 8.90"
White
Product Weight: Red
LAMP
2.8 lbs each
Height
(approx.)
Specifications Blue
Black
Data based on F32T8
Blue
White
BALLAST
Starting Method: Instant
Start
Red
3 Operation below 50°F (10°C) may affect
light output or lamp operation – see
“Low Temp. Starting” definition.
BALLAST
Red
Yellow
BALLAST
Red
QHE Instant Start ballasts will operate F32,
F25, F17 and the U-bend & energy saving
equivalent T8 lamps. Complete performance
data is available in the QUICKSYSTEMS
section of the SYLVANIA Ballast Technology
& Specification Guide.
®
QUICKTRONIC 1x32
Black
White
Red
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with other
manufacturers equivalent lamp types that
meet ANSI specifications.
QHE T8 ISH CC HT
Red
Red
T8 Instant Start
Type
Comments
e
Blue
Blue
High Ballast Factor
SPECIFICATION DATA
BALLAST
Blue
Blue
System Life / Warranty
Red
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Mounting
Length
QUICKTRONIC FM (2 LAMP)
Wiring:
Note: For QT-FM green ground wire to terminal required.
Length
Width
Leads only
Note: For one lamp application, cap any blue lead. Insulate to 60
QUICKTRONIC 1x40DL
Item Number
Black
White
Red
49783 QHE 2 x 32T8 / UNV ISH - HT - SC - 1
QUICKTRONIC High Efficiency
Black
Number
of Lamps
White
Primary
Lamp Wattage
BALLAST
Red
Blue
Blue
Blue
UL Type CC
Blue
BALLAST
Case Size
Blue
HighBlack
Case Temp. Rating
BALLAST
White Factor
Starting/Ballast
Line Voltage (120-277V)
Specifications subject to change without notice.
LAMP
Blue
Blue
QUICKTRONIC 2x40DL
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Red
37
Y
Y
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Low Ballast Factor
Q TP T8 ISL
Professional Series
Lamp / Ballast Guide
32W T8 - OCTRON® lamps
2-lamp QTP2x32T8/UNV ISL-SC
3-lamp QTP3x32T8/UNV ISL-SC
4-lamp QTP4x32T8/UNV ISL-SC
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast, 2 lamps on 3L
ballast, 3 lamps on 4L ballast
Key System Features
•Universal voltage (120-277V)
•Small can enclosure size
• 0.78 ballast factor
•30-40% energy savings
•Lamp Striation Control (LSC)
•Min. Starting Temp:
• - 20°F (-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
SYLVANIA QUICKTRONIC Professional
Series products are typically used in OEM
(original equipment manufacturers) standard fixtures and Trade/Distributor Basic
stocked products for replacement.
SYLVANIA QUICKTRONIC SYSTEM 32
UNV ISL (LP) electronic T8 ballasts offer
several advantages:
• Operate OCTRON T8 lamps with
maximum efficacy and high lumen
output
• Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
• 30-40% energy savings when
compared to F40T12 magnetically
ballasted systems
• Small Can Enclosure for:
• low profile fixture design
• transportation, inventory and
ergonomic benefits
• Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
System Information
SYLVANIA QUICKTRONIC SYSTEM 32 (QTP)
UNV system advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations.
These ballasts are RoHS compliant
and feature lead-free solder and
SYLVANIA QUICKTRONIC
32 UNV ballasts
are ideally suited for:
•Commercial
•Retail
•Hospitality
•Institutional
•New Construction
•Retrofit
38
Lamp Striation Control (LSC)
• General lighting applications where
energy saving T8 lamps may striate,
particularly for the F25 energy saving
T8 lamps
Setting the standard for quality,
QUICKTRONIC T8 Instant Start 32
UNV-ISL systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial
System
Mean
Mean
System Power System Efficacy System Light Energy
Type
(W)
Lumens
LPW
Lumens Output Savings
F34T12 - Std. Magnetic Ballast
E.S. Magnetic Ballast
82
72
4660
4660
57
65
3960
3960
FO32/XP - QTP2x32T8/UNV-ISL-SC
51
4680
92
4400
111%
38%
FO28/SS - QTP2x32T8/UNV-ISL-SC
45
4250
94
3995
101%
45%
• Very low harmonic distortion (<10%)THD
Application Information
manufacturing process.
• Operate at >42 kHz to reduce potential
interference with infrared control systems
• Customers should always consider
upgrading to our High Efficiency
Systems to maximize energy savings
111%
110%
100%
Baseline Baseline
Baseline 12%
101%
100% 100%
90%
80%
38%
Energy
Savings
70%
62%
60%
45%
Energy
Savings
55%
% Relative Light Output
(Mean Lumens)
% System Wattage
(Power)
50%
40%
2-F34T12
Std. Magnetic Ballast
2-FO32/XP/ECO
QTP 2x32 UNV ISL
2-FO28/SUPERSAVER
QTP 2x32 UNV ISL
Catalog #
Date
Project
Prepared by
Professional Series
Comments
Item
Number
Input RatedBallast Input
Current
Lamp
Lumens No. of
Factor System
Mean
Power
(AMPS)
Type
(lm)
Lamps
(BF)
Lumens Lumens
(W)
OSRAM SYLVANIA
Description
QTP2x32T8/UNV ISL-SC
49834
49743
Banded Pack
10-Pack
QTP3x32T8/UNV ISL-SC
49745
10-Pack
QTP4x32T8/UNV ISL-SC
49747
10-Pack
System
Efficacy
(lm/W)
BEF 1
0.44/0.19
0.44/0.19
0.41/0.18
0.38/0.17
0.34/0.15
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.78
0.78
0.78
0.78
0.78
4370
4680
4445
4250
3860
3930
4400
4180
3995
3630
51
51
48
45
40
86
92
93
94
97
1.53
1.53
1.63
1.73
1.95
0.65/0.27
0.65/0.27
0.60/0.26
0.57/0.25
0.50/0.21
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.78
0.78
0.78
0.78
0.78
6550
7020
6670
6380
5790
5895
6600
6270
5995
5445
75
75
71
67
59
87
94
94
95
98
1.04
1.04
1.10
1.16
1.32
0.80/0.35
0.80/0.35
0.78/0.34
0.73/0.32
0.63/0.28
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.78
0.78
0.78
0.78
0.78
8735
9360
8890
8500
7720
7860
8800
8360
7990
7260
98
98
92
86
77
89
96
97
99
100
0.80
0.80
0.85
0.91
1.01
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
Red
Black
White
Red
Blue
BALLAST
BALLAST
Blue
Blue
Black
White
Red
Black/White
White
LAMP
LAMP
QUICKTRONIC 1x32
Note: For one lamp application, cap any blue lead.
Insulate to 600 volts.
Yellow
Yellow
Blue
Blue
BALLAST
LAMP
Red
Red
Black
White
Red
White
Green
Black
BALLAST
LAMP
Green
YellowBlack
LAMP
QUICKTRONIC FM (1 LAMP)
Black Dimensions:
White
BALLAST
RedOverall: 9.5" L
Blue
Blue
x 1.68" W x 1.18" H
Mounting: 8.90"
LAMP
Red
Product Weight:
1.6 lbs each (approx.)
C FM (1 LAMP)
und wire to terminal required.
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.78
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON® T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Blue
Hz
Black Input Frequency: 50/60
Blue
White Low THD:
<10%
BALLAST
Red
Power Factor: >98%
Voltage Range: ±10% of 120-277V
LAMP rated line (108-305V)
White
Red
BALLAST
Blue
Blue
Black
White
Red
BALLAST
Blue
Blue
Blue
Blue
QUICKTRONIC FM (2 LAMP)
8.7 mm cap any blue lead. Insulate to 600 volts.
Wiring:
Note: For one lamp application,
Slot
Note: For QT-FM green ground wire to terminal required.
Leads only (no connectors
QUICKTRONIC 2x40DL
QUICKTRONIC
1x40DL provided)
Blue
Black
Blue Blue
Black
BALLAST
White
White
Red Blue
BALLAST
Blue 49745
Item Number Red
QUICKTRONIC PROFESSIONAL
Number of LampsLAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Specifications subject
to change without notice.
QUICKTRONIC
2x59*
QUICKTRONIC 2x96IS
QTP 3 x 32T8 / UNV ISL -
Black
White
Yellow
SC
Yellow
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
BALLAST
Case
Blac
Whit
Re
Blue
System
BALLAST Life
Blue / Warranty
Note: For two lamp application, cap any blue lead. Insulate to 600 Note:
volts. For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC
3x40DL
1x40DL
LengthQUICKTRONIC
Black
Blue
White
Blue
Red
Size
Red
QUIC
Note: For Q
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
BALLAST
Mounting
Length
Height
White
Green
Black
output or lamp operation – see “Low Temp.
Starting” definition.
Black
White
Red
Blue
Red
Q
Note: For QT-FM green ground wire to terminal required.
Yellow
LAMP
Black
White
Red
Note: For tw
For one lamp
QUICKTRONIC
FCC 47CFR Part 182x32
Non-Consumer
Class A Sound Rating
RoHS Compliant3
ANSI C62.41 Cat. A Transient Protection
GFCI
compatible
BALLAST
Emergency ballast compatible
Remote Mounting (Max. wire length from
ballast case to lampholder):
Blue
• 20 ft: full wattage T8s
• 10 ft: energy saving T8s
Red
LAMP
• 4 ft: 25W energy saving T8s
QUICKTRONIC
FM
(1(10°C)
LAMP)
2 Operation below
50°F
may affect light
Note: For three lamp application, cap any unused blue lead.
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Width
Blue
Blue
Blue
Yellow
QUICKTRONIC
4x32
Black
Black
White
Red
White
Green
Black
Red
LAMP
LAMP
QUICKTRONIC FM (2 LAMP)
Note:
For QT-FM green ground wire to terminal required.
LAMP
Note: For QT-FM green ground wire to terminal required.
BALLAST
LAMP
LAMP
QUICKTRONIC 3x32
QUICKTRONIC 4x32
White
Green
Black
ST
Blue
Blue
BALLAST
BALLAST
Red
LAMP
Red
For two
application, capNote:
two blue
individually.
For leads
two lamp
application, cap any blue lead.
cation, cap
any lamp
blue lead.
For one lamp application, cap two
bluelamp
leads,application,
one red and
For one
cap any two blue leads.
600 volts.
one yellow lead individually. Insulate to 600
volts. to 600 volts.
Insulate
ONIC 2x32
Specifications
UL ListedLAMP
Class P, Type 1 Outdoor
Red
Blue
LAMP
LAMP
Black
WhiteWhite
Yellow
Blue
Blue
Blue
All models will also operate F17, F25
and F32 (and the SUPERSAVER &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Note: For two lamp application, cap any blue lead.
Note: For oneCSA
lamp
application,
cap applicable)
any blue lead.
Certified
(where
For one lamp application,
QUICKTRONIC
1x32 cap any two blue leads.
Insulate
600 Temperature
volts.
70°C
MaxtoCase
Insulate to 600 volts.
QUICKTRONIC 3x32
BALLAST
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® 32ISL-SC
is also compatible with other lamp
manufacturers equivalent lamp types
that meet ANSI specifications.
LAMP
LAMP
QUICKTRONIC 2x32
Blue
Blue
Blue
LAMP
LAMP
LAMP
Black
White
Blue
Blue
Blue
BALLAST
BALLAST
Red
LAMP
LAMP
LAMP
MP Note: For three lamp application, cap any unused blue
lead.
LAST
Performance Guide
Universal Voltage Lamp Striation Control (120-277V)
MP
P
T8 Instant Start
Type
Q TP T8 ISL
AST
Low Ballast Factor
SPECIFICATION DATA
BALLAST
Blue
Blue
Red
Starting/Ballast Factor
Line Voltage (120-277V)
LAMP
LAMP Primary Lamp Wattage
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP
QUICKTRONIC 2x59*
QUICKTRONIC 2x96IS
QUICKTRONIC 2x96HO
Note: For two
QUICKTRONIC 2x40DL
QU
OSRAM SYLVANIA
National Customer
Service and Sales Center
Black
White
1-800-LIGHTBULB
Yellow
(1-800-544-4828)
Yellow
www.sylvania.com
BALLAST
LAMP
39
LAMP
QUICKTRONIC 2x96
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Normal Ballast Factor
Q TP T8 ISN
Professional Series
Lamp / Ballast Guide
32W T8 - OCTRON lamps
1-lamp QTP1x32T8/UNV ISN-SC
2-lamp QTP2x32T8/UNV ISN-SC
3-lamp QTP3x32T8/UNV ISN-SC
4-lamp QTP4x32T8/UNV ISN-SC
®
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast, 2 lamps on 3L
ballast, 3 lamps on 4L ballast
SYLVANIA QUICKTRONIC Professional
Series products are typically used in OEM
(original equipment manufacturers) standard fixtures and Trade/Distributor Basic
stocked products for replacement.
SYLVANIA QUICKTRONIC SYSTEM 32
UNV electronic T8 ballasts offer several
advantages:
1. Operate OCTRON T8 lamps with
maximum efficacy and high lumen
output
• 30-40% energy savings when
compared to F40T12 magnetically
ballasted systems (see table below)
2. Parallel Circuitry: keeps remaining
lamps lit if one or more go out
Key System Features
•Universal voltage (120-277V)
•Small can enclosure size
•Lamp Striation Control (LSC)
• 0.88 ballast factor
•30-40% energy savings
•Min. Starting Temp:
• - 20°F (-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
• 0 °F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
3. Small Can Enclosure for:
• low profile fixture design
• transportation, inventory and
ergonomic benefits
System Information
SYLVANIA QUICKTRONIC SYSTEM 32 (QTP)
UNV system advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
4. Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
Setting the standard for quality,
QUICKTRONIC T8 Instant Start 32
UNV-ISN systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
Relative
Input
Initial System
Mean
Mean
System Power System Efficacy System
Light Energy
Type
(W)
Lumens
LPW
Lumens Output Savings
F40T12 - Std. Magnetic Ballast
E.S. Magnetic Ballast
96
86
5795
5795
60
67
4925
4925
Baseline Baseline
Baseline 10%
F34T12 - Std. Magnetic Ballast
E.S. Magnetic Ballast
82
72
4665
4665
58
66
3965
3965
81%
81%
15%
25%
FO32/XP - QTP2x32T8/UNV-ISN-SC
59
5280
89
4965
101%
39%
FO28/SS - QTP2x32T8/UNV-ISN-SC
52
4795
92
4510
92%
46%
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems
Application Information
• Customers should always consider
upgrading to our High Efficiency
Systems to maximize energy savings
SYLVANIA QUICKTRONIC
32 UNV ballasts
are ideally suited for:
•Commercial
•Retail
•Hospitality
•Institutional
•New Construction
•Retrofit
40
110%
100%
100% 100%
101%
92%
90%
80%
39%
Energy
Savings
70%
61%
60%
46%
Energy
Savings
54%
% Relative Light Output
(Mean Lumens)
% System Wattage
(Power)
50%
40%
2-F40T12
Std. Magnetic Ballast
2-FO32/XP/ECO
QTP 2x32T8/UNV ISN
2-FO28/SUPERSAVER
QTP 2x32T8/UNV ISN
Normal Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
Professional Series
Comments
Performance Guide
Universal Voltage (120-277V), Lamp Striation Control
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QTP1x32T8/UNV ISN-SC
Banded Pack
10-Pack
Pallet Pack
49941
49942
QTP2x32T8/UNV ISN-SC
49906
Banded Pack
10-Pack
Pallet Pack
49943
49944
QTP3x32T8/UNV ISN-SC
49907
49945
Banded Pack
10-Pack
49946
Pallet Pack
QTP4x32T8/UNV ISN-SC
49908
Banded Pack
10-Pack
Pallet Pack
49947
49948
Input
Power
(W)
System
Efficacy
(lm/W)
BEF 1
0.26/0.11
0.26/0.11
0.25/0.11
0.23/0.10
0.20/0.09
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
1
1
1
1
1
0.88
0.88
0.88
0.88
0.88
2465
2640
2510
2400
2180
2220
2480
2360
2255
2050
30
30
28
26
23
82
88
90
91
95
2.93
2.93
3.14
3.38
3.83
0.50/0.21
0.50/0.21
0.46/0.20
0.43/0.19
0.39/0.16
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
0.88
0.88
0.88
0.88
0.88
4930
5280
5015
4795
4355
4435
4965
4715
4510
4095
59
59
55
52
46
84
89
91
92
95
1.49
1.49
1.60
1.69
1.91
0.72/0.31
0.72/0.31
0.69/0.30
0.65/0.28
0.58/0.25
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
0.88
0.88
0.88
0.88
0.88
7390
7920
7525
7195
6535
6650
7445
7075
6760
6140
86
86
81
76
67
86
92
93
95
98
1.02
1.02
1.09
1.16
1.31
0.95/0.40
0.95/0.40
0.91/0.39
0.85/0.37
0.74/0.31
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
4
4
4
4
4
0.88
0.88
0.88
0.88
0.88
9855
10,560
10,030
9590
8710
8870
9925
9430
9015
8190
112
112
105
98
88
88
94
96
98
99
0.79
0.79
0.84
0.90
1.00
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each. Pallet Pack contains 840 pieces, (add “-PAL” to Description).
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor X 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
Blue
Blue
Blue
BALLAST
White
Red
BALLAST
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
amp application, cap any blue lead.
nsulate to 600 volts.
UICKTRONIC 2x32
BALLAST
BALLAST
Blue
Blue
Blue
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.88
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON® T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V rated
Blue
Blue
Blue(108-305V)
Blue
line
Black
Black
BALLAST
BALLAST
Blue
BALLAST
White
White
Red
Red
Blue
Blue
Blue
LAMP
LAMP
LAMP
Yellow
LAMP
Blue
LAMP
RedLAMP
QT-FMapplication,
green ground wire
to terminal
required. blue lead.
Note: For Note:
threeForlamp
cap
any unused
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
Black
White
Red
Note: For QT-FM green
wire to
terminal
required.
3 Cground
omplies
with
European
Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
QUICKTRONIC 4x32
Black
White
Red
Black Blue
Blue
BlackBlue
Blue
BALLAST
White
Blue
White BALLAST
BALLAST
Red
Blue
Black Blue
BALLAST
White Blue
Black BALLAST
Red
White
Blue Life / Warranty
System
Blue
Red
Red
Red
Item Number
Blue
Blue
Blue
BALLAST
Blue
Black Blue
Blue
Black 3 x
QTP
32T8 / UNVBlue
ISN - SC
BALLAST
White 49907
BALLAST
White
Red
QUICKTRONIC PROFESSIONAL
Red
Number of Lamps
LAMP
LAMP
BA
are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Mounting
Length
Note: For QT-FM green ground wire to terminal required.
Black
White
Red
Black
White
Red
Blue
Blue
QUICKTRONIC
BALLAST products
Blue
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Wiring:
8.7 mm
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Slot
QUICKTRONIC
Note: For one lamp application,
cap any blue lead.1x40DL
Insulate to 600 volts.
Note: For two QUICKTRONIC
lamp application, cap any blue2x40DL
lead. Insulate to 600 volts.
Leads only (no connectors provided)
Length
QUICKTRONIC
2x40DL
QUICKTRONIC 3x40DLOSRAM SYLVANIA
QUICKTRONIC 1x40DLWidth
QUICKTRONIC 2x40DL
QUICKTRONIC 3x40DL
QUICKTRONIC 1x40DL
BALLAST
B
Yellow
LA
2 LAMP
Operation below
50°F
Red (10°C) may affect light
Red
output or lampRed
operation – see “Low Temp.
LAMP
Red
LAMP
QUICKTRO
QUICKTRONIC
(1 LAMP)
Starting”FM
definition.
Note: For QT-FM green
LAMP
green ground wire to terminal required.
QUICKTRONICNote:
FMFor(2QT-FM
LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
wire to terminal required.FM (2 LAMP)
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.FM (1 LAMP) Note: For QT-FM green ground
LAMP
Product Weight:
KTRONIC FM (1 LAMP)
1.6 lbs each (approx.) QUICKTRONIC FM (2 LAMP)
Height
-FM green ground wire to terminal required.
RedRed
QUICKTRONIC 4x32
QUICKTRONIC 4x32
BALLAST
Red
Blue
Blue
Black
White
Red
LAMP
LAMP
Dimensions:
Black
Blue
Black Blue
BlueOverall: 9.5” L x 1.68” W x White
1.18” LAMP
H BALLAST
White
BALLAST
Red
Yellow
Mounting: 8.90”
Red
LAMP
Blue
LAMP cap any blue lead.
Note: For two lamp application,
LAMP
lamp
application,
cap
any
two
blue leads.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
Note:
For cap
three
lamp
cap any unused blue lead.
Insulate
to
600
volts.
For two lamp application,
two
blueapplication,
leads individually.
For
two
lamp
application,
For one lamp application,
cap two blue
leads,cap
onetwo
redblue
and leads individually.
QUICKTRONIC
3x32
Forindividually.
one lamp application,
cap volts.
two blue leads, one red and
one yellow lead
Insulate to 600
one yellow lead individually. Insulate to 600 volts.
White
Green
Black
BALLAST
Black
White
Red
Black
White
Red
Specifications
UL Listed Class P, Type 1 Outdoor
CSA Certified
LAMP
70°C
Max Case Temperature
LAMP
LAMP
LAMP
75°C
Max Case Temp. (4-lamp model)
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
FCC
47CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
Note: For two lamp a
Note: For one lamp application,
cap any blue lead.
Class
Sound
any
blue
lead.
Note: For one lamp application,QUICKTRONIC
cap any blue lead. 1x32 Note: For two lamp application, cap
For one lamp applica
Insulate
toA600
volts.Rating
Note: Forcap
twoany
lamp
application,
blue lead.
Note:to
For
one
lamp application, cap any blueFor
lead.
QUICKTRONIC 1x32
3
one lamp application,
two
blue Compliant
leads.cap any
Insulate
600
volts.
Insula
RoHS
QUICKTRONIC 1x32
For one
lamp
application, cap any 2x32
two blue leads.
QUICKTRONIC
Insulate to 600 volts.
Insulate
to 600
volts.
QUICK
QUICKTRONIC 2x32
Insulate
600 volts.
ANSIto C62.41
Cat. A Transient Protection
QUICKTRONIC 2x32
QUICKTRONIC 3x32
QUICKTRONIC
3x32
GFCI compatible
Black
Blue
Emergency
ballast
compatible
Black
Blue
White
Blue
White
White
Black
Blue
Green
Remote Mounting (Max. wire length from
BALL
White
Blue
White
Green
BALLAST
BALLAST
White
Black
Blue
White
Blue
White
Yellow
Red
Black
Green
Black
BALLAST
Green
White
BALLAST
BALLAST
ballast case to lampholder):
Green
Black
BALLAST
Blue
Yellow
Red
Green
Black
BALLAST
BALLAST
White
Yellow
Red
BALLAST
Black
Yellow
Red
Black
Blue
Yellow
Red
• 20 ft: full wattage T8s
Red
Yellow
Red
• 10 ft: energy saving
T8s
LA
Blue
LAMP
Blue
LAMP
Blue
• 4 ft: 25W energy
saving T8s
Blue
LAMP
LAMP
Blue
Red
BALLAST
Black/White
Blue
Black/White
Black
Blue
BALLAST
White
White
All models will also operate F17, F25
and F32 (and the SUPERSAVER &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
Q TP T8 ISN
49905
Rated Ballast
Lumens No. of Factor System
Mean
(lm)
Lamps
(BF)
Lumens Lumens
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® 32ISN-SC
is also compatible with other lamp
manufacturers equivalent lamp types that
meet ANSI specifications.
Black
BALLAST
White
CaseBlack
Size
Black
White
White
BALLAST
Yellow
Starting/Ballast
Factor
Yellow
Yellow
Yellow
Line Voltage (120-277V)
Blue
Blue
Blue
Red
Blue
Red
BALLAST
Red
LAMP
LAMP
LAMP
Specifications subject to change without notice.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x59*
Primary Lamp Wattage
LAMP
LAMP
Blue
Blue
Red
Red
Note: For two lamp applic
QUICKTR
National Customer
Service and Sales Center
1-800-LIGHTBULB Black
White
(1-800-544-4828) Yellow
BALLAST
www.sylvania.com Yellow
LAMP
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
LAMP 2x59*
QUICKTRONIC
LAMP
QUICKTRONIC 2x96IS
Blue
Blue
Red
Red
41
LAMP
QUICKTRONIC 2x96HO
www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
High Ballast Factor
Professional Series
Q T P T 8 ISH
Lamp / Ballast Guide
32W T8 - OCTRON® lamps
2-lamp QTP2x32T8/UNV ISH-SC
3-lamp QTP3x32T8/UNV ISH-SC
Also operates:
FBO32, FBO31, FO30/SS (30W), FBO30/
SS (30W), FBO29/SS (29W), FO28/SS
(28W) & FO25/SS (25W)
SYLVANIA QUICKTRONIC Professional
Series products are typically used in
OEM (original equipment manufacturers)
standard fixtures and Trade/Distributor
Basic stocked products for replacement.
SYLVANIA QUICKTRONIC SYSTEM 32 UNV
ISH electronic T8 ballasts offer several
advantages:
1. Operate OCTRON T8 lamps with
maximum efficacy and high lumen
output
• 3 0-40% energy savings when
compared to F40T12 magnetically
ballasted systems
2. Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
Key System Features
•Universal voltage (120-277V)
•Small can enclosure size
•1.18 - 1.20 high ballast factor
•30-40% Energy savings
•Min. Starting Temp:
• - 20°F (-29°C) for T8 lamps
• 6 0°F (16°C) for Energy Saving
T8 lamps
•<10% THD
•Full lamp life
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder, printed circuit board
and manufacturing process
3. Small Can Enclosure for:
• low profile fixture design
• transportation, inventory and
ergonomic benefits
System Information
SYLVANIA QUICKTRONIC SYSTEM 32 (QTP)
UNV advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems
• Customers should always consider
upgrading to our High Efficiency Systems
to maximize energy savings.
Application Information
SYLVANIA QUICKTRONIC
32 UNV ballasts
are ideally suited for:
•Commercial
•Retail
•Hospitality
•Institutional
•New Construction
•Retrofit
42
These ballasts are RoHS compliant and
feature lead-free solder, printed circuit
boards and manufacturing process.
Setting the standard for quality,
QUICKTRONIC T8 Instant Start 32 UNV-ISH
systems are also covered by the QUICK
60+® warranty, the first and most
comprehensive lamp & ballast system
warranty in the industry.
Relative
Input
Initial System Mean
Mean
System Power System Efficacy System Light Energy
Type
(W) Lumens LPW Lumens Output Savings
4:F34T12 - Two E.S. Magnetic Ballasts
144
9330
65
7930
4:FO32T8/700 - QTP4x32T8/UNV-ISN-SC
112
9860
88
8870
112%
22%
3:FO32/XP - QTP3x32T8/UNV-ISH-SC
114/111
10620
93/96
9985
126%
21%
3:FO28/SS - QTP3x32T8/UNV-ISH-SC
100/98
9645
97/98
9070
114%
31%
2:FO32/XP - QTP2x32T8/UNV-ISH-SC
78
7200
92
6770
85%
46%
2:FO28/SS - QTP2x32T8/UNV-ISH-SC
69
6540
95
6150
78%
52%
130%
% Relative Light Output
(Mean Lumens)
% System Wattage
(Power)
126%
120%
Baseline Baseline
114%
110%
100%
100% 100%
90%
21%
Energy
Savings
80%
79%
31%
Energy
Savings
69%
70%
60%
85%
46%
Energy
Savings
54%
50%
40%
4-F34T12
Two E.S. Magnetic Ballasts
3-FO32/XP/ECO
QTP 3x32T8/UNV ISH
3-FO28/SUPERSAVER
QTP 3x32T8/UNV ISH
2-FO32/XP/ECO
QTP 2x32T8/UNV ISH
High Ballast Factor
SPECIFICATION DATA
Catalog #
Date
Project
Prepared by
T8 Instant Start
Type
Professional Series
Comments
Performance Guide
Universal Voltage (120-277V)
Item
OSRAM SYLVANIA
Number
Description
Input
Current
Lamp
(AMPS)
Type
QTP2x32T8/UNV ISH-SC
49843
10-Pack
QTP3x32T8/UNV ISH-SC
49845
10-Pack
Input
Power
(W)
System
Efficacy
(lm/W)
BEF 1
0.65/0.28
0.65/0.28
0.61/0.26
0.57/0.25
0.51/0.22
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
2
2
2
2
2
1.20
1.20
1.20
1.20
1.20
6720
7200
6840
6540
5940
6050
6770
6430
6150
5585
78
78
73
69
61
86
92
93
95
97
1.54
1.54
1.64
1.74
1.97
0.95/0.41
0.95/0.41
0.89/0.39
0.84/0.36
0.75/0.32
FO32/700
FO32/XP
FO30/SS
FO28/SS
FO25/SS
2800
3000
2850
2725
2475
3
3
3
3
3
1.18
1.18
1.18
1.18
1.18
9910
10620
10090
9645
8760
8920
9985
9485
9070
8235
114/111
114/111
107/104
100/98
89/88
87/89
93/96
94/97
97/98
98/99
1.06
1.06
1.13
1.20
1.34
Banded Pack, (add “-B” to Description). 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor X 100) divided by Input Power (Note: calculation based on lowest wattage value).
Blue
Blue
AST
Blue
Black
Blue
BALLAST
White
BALLAST
Red
Black
White
Red
LAMP
LAMP
MP
Red
LAST
Red
LAMP
LAMP
LAMP
LAMP
LAMP
QUICKTRONIC 2x32
QUICKTRONIC 2x32
Blue
Blue
White
Green
Black
Blue
Blue
Blue
LAMP
LAMP
LAMP
Red
Red
QUICKTRONIC 3x32
QUICKTRONIC 3x32
Ballast
White
Green
Black
BALLAST
BALLAST
White
Green
Black
Input End
BALLAST
BALLAST
White
Green
Black
16mm
(.63 in)
LAMP
Blue
Blue
MP
LAMP
MP
MP
Note: For QT-FM green ground wire to terminal required.
e lead. Insulate to 600 volts.
y unused blue lead. Insulate to 600 volts.
4x32
ONIC 4x32
LAMP
Red
Red
LAMP
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
FMrequired.
(1 LAMP)
Note: For QT-FM
green ground wire to terminal
MP
Blue
Blue
Blue
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
x32
ONIC 1x32
Blue
Blue
Blue
Blue
Black
BALLAST
Blue
BALLAST
White
Red
Black
White
Red
Ballast
Output End
Blue
AST
Blue
Blue
Red
Blue
Black
Blue
BALLAST
White
Blue
BALLAST
Red
QUICKTRONIC 2x40DL
Item Number
498452x40DL
QTP 3 x
QUICKTRONIC
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 3x40DL
Case Size
QUICKTRONIC
3x40DL
32T8 / UNV ISH - SC
QUICKTRONIC PROFESSIONAL
Starting/Ballast Factor
Number of Lamps
Line Voltage (120-277V)
Blue
Red
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 1.18 - 1.20
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON® T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
UL Listed Class P, Type 1 Outdoor
CSA Certified
70°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
RoHS Compliant 3
ANSI C62.41 Cat. A Transient Protection
GFCI compatible
Emergency ballast compatible
Remote Mounting (Max. wire length from
ballast case to lampholder):
• 20 ft: full wattage T8s
• 10 ft: energy saving T8s
• 4 ft: 25W energy saving T8s
2 Operation below 50°F (10°C) may affect light
output or lamp operation – see “Low Temp.
Starting” definition.
3 Complies with European Union Restriction of
Hazardous Substances Directive.
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
ack
BALLAST
Blue
Specifications
subject to change without notice.
Red
BALLAST
hite
QTP Instant Start ballasts will operate F32
(and the SUPERSAVER & U-Bend equivalent)
T8 lamps. Complete performance data is
available in the QUICKSYSTEMS section
of the SYLVANIA Ballast Technology &
Specification Guide.
System Life / Warranty
Blue
Blue
Blue
Mounting
Length
Width
1x40DL
ONIC 1x40DL
Blue
Tc Point Location Yellow
Note: For QT-FM green ground wire to terminal required.
Black
White
Red
Product Weight: Black
Blue
White Black
1.6 lbs each (approx.)
BALLAST Blue Blue
White
Red
BALLAST Blue
Red
Height
Wiring:
Leads only (no connectors provided)
8.7 mm
Slot
Blue
Yellow
Red
LAMP
QUICKTRONIC FM (2 LAMP)
QUICKTRONIC
FMrequired.
(2 LAMP)
Note: For QT-FM
green ground wire to terminal
60mm
(2.36 in)
Dimensions:
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
LAMP
Data based upon SYLVANIA OCTRON® lamps
shown. QUICKTRONIC® 32ISH-SC is also
compatible with other lamp manufacturers
equivalent lamp types that meet ANSI
specifications.
Q T P T 8 ISH
Rated Ballast
Lumens No. of Factor System
Mean
(lm)
Lamps (BF) Lumens Lumens
Primary Lamp Wattage
Black
Blue
Blue
White Black
BALLAST
Red
Yellow White
BALLAST
Red
Yellow Yellow
Blue
Blue
Red
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
43