Automotive Devices
with Extended Temperature Range
TI automotive offers extended
temperature for Industrial
applications
TI offers a wide portfolio
of automotive devices which
is also suitable for many
applications in the industrial market.
Advantages of using -Q100 devices
in industrial systems involve
(and are not limited to):
• Extended temperature range
(up to 105°C or 125°C)
• Long term availability for customer convenience
• Zero DPPM Strategy*
*Zero DPPM Strategy enables low defect fallouts as required by automotive applications.
DPPM = Defective Parts per Million
See below for a list of automotive devices with extended temperature
range applicable for various industrial end equipment such as:
building automation, factory automation, avionics and defense, lighting,
medical, test and measurement, motor drives, and retail automation.
Operational amplifiers
Device
Description
Extended temp range
(°C)
Standard temp range
(°C)
OPA564-Q1
Automotive catalog 1.5 A, 24 V, 17 MHz, power operational amplifier
–40 to 125
–40 to 85
RC4580-Q1
Automotive catalog dual-audio operational amplifier
–40 to 125
–40 to 85
TL082-Q1
Automotive catalog JFET-input operational amplifier
–40 to 125
–40 to 85
TL331-Q1
Automotive catalog single-differential comparator
–40 to 125
–40 to 85
TL3472-Q1
Automotive catalog high-slew-rate, single-supply operational amplifier
–40 to 125
–40 to 105
TLC3702-Q1
Automotive catalog dual-micropower, LinCMOS™ voltage comparators
–40 to 125
–40 to 85
TLC3704-Q1
Automotive catalog quad-micropower, LinCMOS™ voltage comparators
–40 to 125
–40 to 85
TLV2434A-Q1
Automotive catalog advanced LinCMOS, rail-to-rail output, wide-input-voltage operational amplifiers
–40 to 125
–40 to 85
BUF20800-Q1
Automotive catalog 18-channel gamma voltage generator with two programmable VCOM channels
–40 to 105
–40 to 95
THS4509-Q1
Automotive catalog wideband operational amplifier
–40 to 125
–40 to 85
TLV3012-Q1
Automotive catalog nanopower, 1.8 V, SOT23 push-pull comparator with voltage reference
–40 to 125
–40 to 85
www.ti.com2Q15
Data converters
Device
Description
Extended temp range
(°C)
Standard temp range
(°C)
ADS7841-Q1
Automotive catalog 12-bit, 4-channel serial output sampling analog-to-digital converter
–40 to 125
–40 to 85
ADS7843-Q1
Automotive catalog 4-wire touch screen controller
–40 to 125
–40 to 85
DAC900-Q1
Automotive catalog 10-bit, 165 MSPS SpeedPlus™ DAC scalable current outputs between 2 mA to 20 mA
–40 to 105
–40 to 85
TSC2008-Q1
Automotive catalog nano-power touch screen controller with SPI
–40 to 125
–40 to 85
TSC2046E-Q1
Automotive catalog 4-wire touch screen controller with low voltage digital I/O
–40 to 125
–40 to 85
Extended temp range
(°C)
Standard temp range
(°C)
Audio
Device
Description
PCM1681-Q1
Automotive catalog 105 dB SNR 8-channel audio DAC
–40 to 105
–40 to 85
PCM1753-Q1
Automotive catalog 106 dB SNR stereo DAC (S/W control)
–40 to 105
–25 to 85
PCM1754-Q1
Automotive catalog 106 dB SNR stereo DAC (H/W control)
–40 to 105
–25 to 85
PCM1789-Q1
Automotive catalog 113 dB SNR stereo DAC
–40 to 105
–40 to 85
PCM1804-Q1
Automotive catalog 112 dB SNR stereo ADC with differential inputs
–40 to 85
–10 to 85
TLV320ADC3101-Q1
Automotive catalog 92 dB SNR low-power stereo ADC with digital mic support and miniDSP
–40 to 105
–40 to 85
TPA2000D1-Q1
Automotive catalog mono filter-free class-D audio amplifier
–40 to 105
–40 to 85
TPA2005D1-Q1
Automotive catalog 1.4-W mono filter-free class-D audio power amplifier
–40 to 105
–40 to 85
TPA6211A1-Q1
Automotive catalog 3.1-W mono, fully differential, class-AB audio amplifier
–40 to 105
–40 to 85
Extended temp range
(°C)
Standard temp range
(°C)
Load switches
Device
Description
TPS22965-Q1/
TPS22965+
Automotive 5.5 V, 4 A, 16 mΩ automotive load switch with quick output discharge and
adjustable rise time
–40 to 105
–40 to 105
TPS22966-Q1
Automotive 5.5 V, 4 A, 16 mΩ 2-ch automotive load switch with quick output discharge and
adjustable rise time
–40 to 105
–40 to 85
TPS22968-Q1
Automotive 5.5 V, 4 A, 27 mΩ 2-ch automotive load switch with quick output discharge and
adjustable rise time
–40 to 125
–40 to 85
Extended temp range
(°C)
Standard temp range
(°C)
Interface
Device
Description
PCA9306-Q1
Automotive catalog dual-bidirectional, I2C bus and SMBus voltage-level translator
–40 to 105
–40 to 85
TRS3223-Q1
Automotive catalog 3-V to 5.5-V multichannel RS-232 line driver/receiver with ±15-kV ESD
–40 to 125
–40 to 85
TS3USB221A-Q1
Automotive catalog ESD protected, high-speed USB 2.0 (480-Mbps) 1:2 multiplexer/demultiplexer switch
–40 to 125
–40 to 85
Extended temp range
(°C)
Standard temp range
(°C)
SMPS
Device
TPS54362-Q1
Automotive catalog 3 A, 60 V step-down, DC/DC converter with low IQ, voltage supervision and reset
–40 to 125
n/a
TPS54610-Q1
Automotive catalog 3.5 V to 60 V input, 0.5 A, 2.5 MHz, step-down SWIFT™ converter with eco-mode
–40 to 125
–40 to 85
TPS62260-Q1
Automotive catalog 2.25 MHz, 600 mA, step-down converter in 2 x 2 mm SON/TSOT23 packages
–40 to 125
–40 to 85
UCC2803-Q1
Automotive catalog low-power, BiCMOS, current-mode PWM
–40 to 125
–40 to 85
UCC2813-x-Q1
Automotive catalog low-power, BICMOS, current-mode PWM
–40 to 125
–40 to 85
+
2
Description
A s industrial applications typically support up to –40°C to 85°C, these devices are highlighted to show that both the automotive and commercial versions have an extended temperature range above 85°C to support current
and future industrial needs.
|
Automotive Devices with Extended Temperature Range 2Q15
Texas Instruments
Logic
Device
Description
Extended temp range
(°C)
Standard temp range
(°C)
SN74AC04-Q1
Automotive catalog dual-bidirectional, I2C Bus and SMBus voltage-level translator
–40 to 125
–40 to 85
SN74AC08-Q1
Automotive catalog quadruple, 2-input, positive-Q1ND gates
–40 to 125
–40 to 85
SN74AC240-Q1
Automotive catalog octal buffers/drivers with 3-state outputs
–40 to 125
–40 to 85
SN74ACT00-Q1
Automotive catalog quadruple 2-input, positive-NAND gates
–40 to 105
–40 to 85
SN74ACT10-Q1
Automotive catalog triple 3-input, positive-NAND gates
–40 to 105
–40 to 85
SN74AUP1G08-Q1
Automotive catalog low-power, single 2-input, positive-AND gate
–40 to 125
–40 to 85
SN74AVC16T245-Q1
Automotive catalog 16-bit, dual-supply bus transceiver with configurable voltage translation
–40 to 125
–40 to 85
SN74AVC8T245-Q1
Automotive catalog 8-bit dual-supply bus transceiver with configurable voltage translation, 3-state output
–40 to 125
–40 to 85
SN74AVCB164245-Q1
Automotive catalog 16-bit dual-supply bus transceiver with configurable voltage translation, 3-state output
–40 to 125
–40 to 85
SN74CB3T16210-Q1
Automotive catalog 20-bit FET Bus switch, 2.5-V/3.3-V low-voltage bus switch with 5-V-tolerant level
–40 to 125
–40 to 85
SN74CB3T1G125-Q1
Automotive catalog single FET 2.5-V/3.3-V low-voltage bus switch with 5-V tolerant level shifter
–40 to 125
–40 to 85
SN74CBTLV1G125-Q1
Automotive catalog low-voltage, single FET bus switch
–40 to 125
–40 to 85
SN74HC138-Q1
Automotive catalog 3-line to 8-line decoders/demultiplexers
–40 to 125
–40 to 85
SN74HC139-Q1
Automotive catalog dual 2-line to 4-line decoders/demultiplexers
–40 to 125
–40 to 85
SN74HC151-Q1
Automotive catalog 8-line to 1-line data selector/multiplexer
–40 to 125
–40 to 85
SN74HC193-Q1
Automotive catalog 4-bit, synchronous up/down counters (dual clock with clear input pin)
–40 to 125
–40 to 85
SN74HC253-Q1
Automotive catalog dual 4-line to 1-line data selectors/multiplexers with 3-state outputs
–40 to 125
–40 to 85
SN74HC4060-Q1
Automotive catalog 14-stage, asynchronous binary counters and oscillators
–40 to 125
–40 to 85
SN74HC4852-Q1
Automotive catalog dual 4- to 1-channel analog multiplexer/demultiplexer
–40 to 125
–40 to 85
SN74LV221A-Q1
Automotive catalog dual-monostable multivibrators
–40 to 125
–40 to 85
SN74LV374A-Q1
Automotive catalog octal edge-triggered, D-type flip-flops with 3-state outputs
–40 to 105
–40 to 85
SN74LV393A-Q1
Automotive catalog dual 4-bit binary counters
–40 to 105
–40 to 85
SN74LV4051A-Q1
Automotive catalog 8-channel analog multiplexer/demultiplexer
–40 to 125
–40 to 85
SN74LV4052A-Q1
Automotive catalog dual 4-channel analog multiplexer/demultiplexer
–40 to 125
–40 to 85
SN74LV4053A-Q1
Automotive catalog triple 2-channel, analog multiplexer/demultiplexer
–40 to 125
–40 to 85
SN74LV86A-Q1
Automotive catalog quadruple 2-input, exclusive-OR gates
–40 to 105
–40 to 85
SN74LVC138A-Q1
Automotive catalog 3-line to 8-line decoder/demultiplexer
–40 to 125
–40 to 85
SN74LVC139A-Q1
Automotive catalog dual 2-line to 4-line decoder/demultiplexer
–40 to 125
–40 to 85
SN74LVC157A-Q1
Automotive catalog quadruple 2-line to 1-line data selector/multiplexer
–40 to 125
–40 to 85
SN74LVC1G3157-Q1
Automotive catalog single-pole, double-throw analog switch
–40 to 125
–40 to 85
SN74LVC1G66-Q1
Automotive catalog single analog switch
–40 to 125
–40 to 85
SN74LVC1T45-Q1
Automotive catalog single-bit, dual-supply bus transceiver with configurable voltage translation
–40 to 125
–40 to 85
SN74LVC257A-Q1
Automotive catalog quadruple 2-line to 1-line data selector/multiplexer with 3-state outputs
–40 to 125
–40 to 85
SN74LVC2T45-Q1
Automotive catalog dual-bit, dual-supply transceiver with configurable voltage translation
–40 to 125
–40 to 85
SN74LVC8T245-Q1
Automotive catalog 8-bit Dl-Spply bus transceivers with voltage translation and three-state outputs
–40 to 125
–40 to 85
SN74LVT125-Q1
Automotive catalog 3.3-V ABT, quadruple bus buffers with 3-state outputs
–40 to 125
–40 to 85
SN74LVTH16245A-Q1
Automotive catalog 3.3-V ABT, 16-bit bus transceivers with 3-state outputs
–40 to 125
–40 to 85
SN74LVU04A-Q1
Automotive catalog hex inverters
–40 to 125
–40 to 85
TXB0104-Q1
Automotive catalog 4-bit bidirectional voltage-level translator with auto direction sensing and ±1
–40 to 125
–40 to 85
Texas Instruments Automotive Devices with Extended Temperature Range 2Q15
|
3
SLYB221
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated