Power Distribution Blocks with
Short-Circuit Current Ratings
The requirements of the 2005 National Electric Code (NEC) and
UL508A now require many electrical panels to carry a Short Circuit
Current Rating (SCCR). Analyzing the SCCR of individual components and overcurrent protection devices is a method of determining the SCCR of an electrical assembly. Equipment with low
SCCR’s are limited to locations where only low-level short-circuit
current is available. By replacing a low-rated power distribution
block with a Marathon high SCCR power distribution block, an
assembly can achieve a higher SCCR for more installation flexibility.
Marathon’s Power Distribution Blocks are standard products that have been used in electrical control panels for over 35
years. These blocks have now been tested and approved for higher SCCR. The higher ratings are based on proper
wire sizes and the appropriate circuit protection device (fuses or circuit breakers). UL508A does allow default
SCCR for Power Distribution Blocks of 10,000A with no additional testing.
Marathon’s Power Distribution Blocks are recognized under UL Standard 1059 (UL File # E62806) and have been investigated by UL for Short Circuit Current Rating under category XCFR2; Terminal Blocks-Component.
In addition, Marathon offers Power Distribution Blocks that are listed to UL 1953 (UL File # E309401). The feeder spacing requirements of UL508A are achieved with these blocks.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Short-Circuit Current Ratings
General Information:
UL Listed Power Distribution Blocks
The requirements of the 2005 National Electric Code (NEC)
and UL508A now require many electrical panels to carry a
UL Listed Power Blocks
Short Circuit Current Rating (SCCR). These new Power
Distribution Blocks are listed to UL1953. The feeder spacing
requirements of UL508A are achieved with these blocks.
Specifications:
•Connector Housings, Thermoplastic, UL 94 V-0, RTI 125oC
•Insulator Base Plate, Phenolic Laminate, UL 94 V-0, RTI 130oC
•Wire Connectors - Tin Plated Aluminum, Rated for Copper or
Aluminum Wire (CU & AL)
•Short Circuit Current Rating up to 100kA (100kA SCCR Rating
•UL 508A Feeder Circuit Terminal Spacing for up to 600 Volts
• Rated up to 335 Amp, 600 Volts
• Line side conductor up to 600 kcmil
•Distribution, up to twelve conductors per pole
• Investigated to UL 1953
with copper conductors only. Requires specific over-current
protection device.)
• Flexible Stranded Wire Compliant
• Attached hinged cover
• UL Category and File: QPQS.E309401
• RoHS Compliant
Current
Amps
LINE SIDE
LOAD SIDE
Connector Wire Range
Config.
AWG/kcmil
SCCR RMS
Connector
Sym Amps
Config.
600 volt Max
CU
AL
Connector
Material
FPB23570 CH 175
135
Aluminum
2/0 - #14
1
#4 - #14
4
100,000
FPB23572 CH 175
135
Aluminum
2/0 - #14
1
2/0 - #14
1
100,000
FPB23574 CH 175
135
Aluminum
2/0 - #14
1
1/4 - 20 stud
1
100,000
FPB23580 CH 175
135
Aluminum
2/0 - #14
1
#4 - #14
6
100,000
FPB33553 CH 335
270
Aluminum
400 kcmil - #6
1
#2 - #14
6
100,000
FPB33588 CH 335
335
600 kcmil - #2
1
1/0 - #14
3
Aluminum
#2 - #14
6
FPB33595 CH 335
335
Aluminum
600 kcmil - #2
1
#4 - #14
12
Catalog #
Wire Range
AWG/kcmil
Openings
Per Pole
Openings
Per Pole
100,000
100,000
See page 37 for dimensional information.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
UL Listed Power Distribution Blocks
FPB23XXX
4.25
108
1.31
33.3
.38
9.5
1.63
41.3
2.25
57.2
3.00
76.2
Ø.22 [5.6] THRU
CBØ .50 X .38 DP 4X
[12.7 X 9.7 DP]
3.18
80.8
w/ Cover
FPB33XXX
3.05
77.3
w/o Cover
6.00
152.4
.38
9.5
1.38
34.9
3.25
82.5
4.75
120.6
5.50
139.7
Ø .22 [5.6] THRU
CBØ .50 X .38 DP 4X
[12.7 X 9.7 DP]
PRODUCT & SCCR INFORMATION
PROVIDED ON SIDES OF BLOCK
4.11
104.5
w/ Cover
3.96
100.5
w/o Cover
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
UL Listed Power Blocks
PRODUCT & SCCR INFORMATION
PROVIDED ON SIDES OF BLOCK
UL Listed Enclosed Power Blocks
UL Listed Enclosed
Power Blocks
Specifications:
Electrical
• 600 Volts AC/DC+
• 1000 Volts (IEC)
• Up to 115 Amps
• Wire Range #2 to #14
• Flexible Stranded Wire Compliant
Standards
• UL Listed File No. QPQS.E309401
(UL 1953)
• CSA Certified File No. LR19766
(CSA C22-2 No. 158)
•
(Component IEC 60947-7-1)
• IEC 60529, IP-20
• RoHS Compliant
Mechanical
• Base, Gray Thermoplastic, 125oC
(257oF) (UL RTI)
• Flammability, UL 94 V-0
• Mounting: DIN or panel mount
Accessories (consult Cust. Service)
• White Markers to Identify Circuits
• DIN Rail for Mounting Option
Shown left to right: EPBAD24, EPBAD21
• End Piece for DIN Rail (MSK35)
Catalog #
Amperage
CU Wire
75oC
EPBAD21
115
EPBAD24
115
LINE SIDE
LOAD SIDE
Openings
Per Pole
Wire Range
AWG/kcmil
#2 - #14 AWG
Connector
Configuration
#2 - #14 AWG
1
35 - 2.5 mm2
#2 - #14 AWG
35 - 2.5 mm2
#10 - #14 AWG
1
35 - 2.5 mm2
Wire Range
AWG/kcmil
6 - 2.5 mm2
Openings
Per Pole
Connector
Configuration
SCCR, RMS
SYM Amps
600 Volt Max
1
100,000
4
65,000
Ordering Code:
EPB
A
Connector Material:
A - Aluminum rated copper or aluminum wire
D
21
D - Mount on
35 mm DIN rail
or flat panel
21 - (1) #2 to (1) #2
24 - (1) #2 to (4) #10
SLOT .31 X .21,
[7.9 X 5.3]
FOR USE WITH
#10 MTG SCREW
Note:
1)
2)
LISTED
POWER
DISTRIBUTION
BLOCK - 3JUU
4.14
105.2
.37
9.5
2.24
56.8
1.49
37.9
5/32 [4mm]
HEX DRIVE
115A 600V
AC/DC
CU75
CU Str./Sol.
Min. Enclosure
Size: 16 x 12 x 6in
3)
The ampacities are based on
Table 310-16 of the NEC.
The connectors were tested and
approved per UL 486 A/B.
For detailed SCCR information
with fuses and circuit breakers,
please refer to datasheets on
MarathonSP website.
STACK-UP DIMENSIONS
(If Dovetail is used for Mulit-Line)
DOVETAIL FEATURES
ON SIDES OF BLOCK
FOR MULTI-LINE
STACK-UP
(SEE NOTE-6)
3.75
95.3
IEC
60947-7-1
See Data-sheet
for addtional
ratings
5/64 [2mm]
HEX DRIVE
TYP. FOR SNAP-IN
MARKER CARDS
SCCR RATINGS & ENGLISH
& METRIC WIRE RANGES
W/TORQUE PRINTED ON
OPPOSITE SIDE OF BLOCK.
.10
2.6
.75
19
.75
18.9
TYP.
1.49
37.8
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Enclosed Power Blocks
COMING SOON: UL LISTED ENCLOSED POWER BLOCKS
Specifications:
Mechanical
• Base, Gray Thermoplastic,
125oC (UL RTI)
•Flammability, UL 94 V-0
•Mounting: DIN or panel mount
Multiple Wire Ratings
Copper Stranded Wire Only
#2 opening:
(2) #6 AWG
(2) #8 AWG
(2 to 4) #10 AWG
(2 to 4) #12 AWG
(2 to 4) #14 AWG
Standards
• UL Recognized File No. XCFR2.E62806
(UL 1059)
•CSA Certified File No. LR19766
(CSA C22.2 No. 158)
•
(IEC 60947-7-1)
•IEC 60529, IP-20
• RoHS Compliant
Accessories (consult Cust. Service)
• White Markers to Identify Circuits
•Black Thermoplastic Safety Plugs
•Feed Spacing UL508A Adapter Plate
Catalog #
Amperage
CU Wire
75oC
EPBXD41
175
EPBXD44
175
EPBXD71
510
Connector Wire Hole Size
Conductor Diameter of
opening:
opening:
#2 - #14 AWG
.38”
2/0 - #14 AWG
.50”
250 kcmil - #6 AWG
.72”
400 kcmil - #6 AWG
.94”
Openings
Per Pole
2/0 - #14 AWG
2/0 - #14 AWG
250 kcmil - #6 AWG
120 - 16 mm2
Wire Range
AWG/kcmil
2/0 - #14 AWG
70 - 2.5 mm2
#2 - #14 AWG
1
70 - 2.5 mm2
LOAD SIDE
Connector
Config.
1
70 - 2.5 mm2
35 - 2.5 mm2
250 kcmil - #6 AWG
2
120 - 16 mm2
Openings
Per Pole
SCCR, RMS
Connector SYM Amps
Config.
600 Volt Max
1
100,000
4
100,000
10,000
2
50,000 100,000
400 kcmil - #6 AWG
335
EPBXP74
185 - 16 mm2
2/0 - #14 AWG
70 -2.5 mm2
1
#2 - #14
35 - 2.5mm
1
Ordering Code:
EPB
2/0 opening:
(2) #4 AWG
(2) #6 AWG
(2) #8 AWG
(2) #10 AWG
(2) #12 AWG
(2) #14 AWG
LINE SIDE
Wire Range
AWG/kcmil
EPBXP71
EPBXD74
Shown left to right: EPBAD71, EPBAD74
EPBAD41, EPBAD44
2
8
10,000
100,000
Note:
A
D
41
D - Mount on
35 mm DIN rail
or flat panel
41 - (1) 2/0 to (1) 2/0
44 - (1) 2/0 to (4) #2
71 - (2) 250 kcmil to
(2) 250 kcmil
74 - (1) 400 kcmil to
(1) 2/0 to (8) #2
1) The ampacities are based on Table 310-16 of the NEC.
Connector Material:
A - Aluminum rated
copper or aluminum wire
P - Flat panel
C - Copper rated copper (for 71 and 74
only)
wire only
See page 40 for dimensional information.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Enclosed Power Blocks
Electrical
• 600 Volts AC/DC+
(IEC - 690 Volts AC/DC)
•Up to 510 Amps
•Wire Range 2/0 to 400 kcmil
• Flexible Stranded Wire Compliant
Enclosed Power Block Dimensions
Enclosed Power Blocks
EPBXD41 & EPBXD44
STACK UP DIMENSIONS
(IF DOVETAIL IS USED FOR MULTI-LINE)
2.60 65.93
3.84 97.45
SLOT .50 X .25
[12.70 X 6.35]
2.56 64.97
2.53 64.29
4.11
102.04
3.00 76.20
3.76
[95.58]
TYP. FOR SNAP-IN
MARKER CARDS
.64 16.24
1.33 33.78
1.28
[32.49]
TYP.
2.56 64.97
EPBXX71 & EPBXX74
STACK UP DIMENSIONS
(IF DOVETAIL IS USED FOR MULTI-LINE PB)
3.29 83.47
6.66 169.10
SLOT .52 X .27
[13.21 X 6.86]
4.44 112.73
3.14 79.79
4.73
[114.54]
3.75
[95.25]
4.39
[111.44]
TYP. FOR SNAP-IN
MARKER CARDS
1.11
[28.18]
2.27 57.58
2.22 56.36
4.44 112.73
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Terminal Blocks
General Information:
Barrier Style Power Terminal Blocks are available in eight sizes. They are identified by the first three digits of the catalog number. The
140, 142, 143, 144 and 145 series are manufactured with general purpose phenolic rated at 150oC. The 141, 132 and 133 series are
manufactured with high impact thermoplastic rated at 125oC.
Connector Wire Hole Size:
Conductor Opening
Diameter of Opening
English
Inch
Metric
Metric
#10 AWG
.158”
4.0
6
#4 AWG
.250”
6.4
25
#2 AWG
.352”*
7.9
35
1/0
.406”
10.3
50
2/0
.438”*
11.1
70
3/0
.532”
13.5
95
250 kcmil
.630”*
16.0
120
350 kcmil
.718”
18.2
185
400 kcmil
.769”*
500 kcmil
.875”
22.2
240
600 kcmil
.938”
23.8
300
750 kcmil
1.125”
1000 kcmil
1.250”
* Enclosed blocks have larger openings (see page 39)
Ratings and Standards:
The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through
air and over surface and line to ground through air and over surface.
Class A
Service equipment including deadfront switchboards, panel boards, service entrance devices.
Class B
Commercial appliances including business equipment, electronic data processing equipment and the like.
Class C
General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 1059 may be higher in some cases depending on application.
Spacing Requirements*:
Voltage
Thru Air
Over Surface
Class A
Class B
Class C
*In Inches
51-150
151-300
301-600
51-150
151-300
301-600
51-150
151-300
301-600
.500
.750
1.000
.063
.094
.375
.125
.250
.375
.750
1.250
2.000
.063
.094
.500
.250
.375
.500
Applications:
Designed for use with solar, wind, alternate energy, transportation, heating, air conditioning and refrigeration, elevator systems,
material handling equipment, control panels, motor control, switchgear and any area where power needs to be distributed to more
than one load.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Blocks
Enclosed touch proof power terminal blocks (EPB series) are available in three sizes (one listed, two recognized).
Power Distribution Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Power Blocks
Specifications:
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1423570
1414400
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
*** Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles (0 = Adder)
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
LINE SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
141X403
1/2/3/4
60
Plastic
AL
#2 - #14 AWG
1
#10 - #16 AWG
2
141X400
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
#10 - #16 AWG
4
0/1/2/3
175
Plastic
AL
2/0 - #14 AWG
1
#4 - #14 AWG**
4
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
#4 - #14 AWG**
4
0/1/2/3
175
Plastic
AL
2/0 - #14 AWG
1
#4 - #14 AWG**
6
140X402
2/3
175
Phenolic
AL
2/0 - #14 AWG
1
#4 - #14 AWG**
4
140X401
2/3
175
Phenolic
AL
2/0 - #14 AWG
1
#4 - #14 AWG**
6
0/1/2/3
175
Plastic
CU
2/0 - #14 AWG
1
#4 - #14 AWG**
4
142X970
1/2/3
175
Phenolic
CU
2/0 - #14 AWG
1
#4 - #14 AWG**
4
140X404
2/3
310
Phenolic
AL
350 kcmil - #6 AWG
1
#4 - #14 AWG
6
1/2/3
310
Plastic
AL
350 kcmil - #6 AWG
1
2/0 - #14 AWG
2
132X570
CH
142X570
132X580
132X970
133X554
CH
CH
CH
CH = Block is also available with hinge cover attached - include “CH” at end of part
number when ordering (not available on Adder blocks) - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Distribution Blocks
(cont.)
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Specifications:
1443560
1433553
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
*** Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
LINE SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
144X401
1/2/3
335
Phenolic
AL
400 kcmil - #6 AWG
1
#2 - #14 AWG
6
143X552
1/2/3
335
Phenolic
AL
400 kcmil - #6 AWG
1
#2 - #14 AWG
4
143X553
1/2/3
335
Phenolic
AL
400 kcmil - #6 AWG
1
#2 - #14 AWG
6
144X560
1/2/3
335
Phenolic
AL
400 kcmil - #6 AWG
1
#2 - #14 AWG
8
1/2/3
335
Plastic
AL
400 kcmil - #6 AWG
1
#2 - #14 AWG***
4
1/2/3
350
Phenolic
AL
2/0 - #14 AWG
2
#4 - #14 AWG**
6
1/2/3
350
Plastic
AL
2/0 - #14 AWG
2
#4 - #14 AWG**
6
1/2/3
350
Phenolic
CU
2/0 - #14 AWG
2
#4 - #14 AWG**
6
1/2/3
350
Plastic
CU
2/0 - #14 AWG
2
#4 - #14 AWG**
6
1/2/3
380
Phenolic
CU
500 kcmil - #4 AWG
1
#2 - #14 AWG
6
1/2/3
380
Plastic
CU
500 kcmil - #4 AWG
1
#2 - #14 AWG***
6
133X552
CH
143X555
133X555
CH
143X955
133X955
CH
143X953
133X953
CH
CH = Block is also available with hinge cover attached - include “CH” at end of part number
when ordering (not available on Adder blocks) - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Blocks
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
Power Distribution Blocks
(cont.)
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Power Blocks
Specifications:
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1333588 CH
1333595 CH
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
*** Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles
LINE SIDE
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
144X551
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
#2 - #14 AWG
6
145X579
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
2/0 - #14 AWG
6
1/2/3
380
Plastic
AL
500 kcmil - #4 AWG
1
#2 - #14 AWG***
350 kcmil - #6 AWG
3
1
143X587
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
#2 - #14 AWG***
350 kcmil - #6 AWG
3
1
145X594
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
#2 - #14 AWG
8
145X552
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
#2 - #14 AWG
12
133X587
CH
133X588
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
#2 - #14 AWG***
1/0 - #14 AWG
6
3
133X595
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
4 - #14 AWG**
12
133X585
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
2 - #14 AWG***
8
133X575
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
2/0 - #14 AWG
4
133X565
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
250 kcmil - #6 AWG
2
CH = Block is also available with hinge cover attached - include “CH” at end of
part number when ordering - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Distribution Blocks
(cont.)
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Specifications:
1333596 CH
1333598 CH
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
*** Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles
LINE SIDE
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
Wire Range
AWG/kcmil
Connector
Openings
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
133X596
CH
1/2/3
510
Plastic
AL
250 kcmil - 1/0 AWG
2
#4 - #14 AWG**
12
133X597
CH
1/2/3
510
Plastic
AL
250 kcmil - 1/0 AWG
2
#2 - #14 AWG***
8
133X598
CH
1/2/3
510
Plastic
AL
250 kcmil - 1/0 AWG
2
2/0 - #14 AWG
4
145X587
1/2/3
690
Phenolic
AL
500 kcmil - #4 AWG
350 kcmil - #4 AWG
1
1
2/0 - #14 AWG
4
145X592
1/2/3
760
Phenolic
AL
500 kcmil - #4 AWG
2
#4 - #14 AWG**
12
145X586
1/2/3
760
Phenolic
AL
500 kcmil - #6 AWG
2
2/0 - #14 AWG
8
145X992
1/2/3
760
Phenolic
CU
500 kcmil - #4 AWG
2
#2 - #14 AWG
12
145X986
1/2/3
760
Phenolic
CU
500 kcmil - #4 AWG
2
2/0 - #14 AWG
8
145X408
1/2/3
760
Phenolic
AL
500 kcmil - #6 AWG
2
#2 - #14 AWG
12
145X411
1/2/3
840
Phenolic
AL
600 kcmil - #2 AWG
2
3/0 - #6 AWG
#4 - #14 AWG**
4
4
1453401*
1
2280 Phenolic
AL
500 kcmil - #4 AWG
6
2/0 - #14 AWG
18
CH = Block is also available with hinge cover attached - include “CH” at end of
part number when ordering - See page 55 for available covers
See pages 52-54 for dimensional information
*Special one-pole block. Apply Power Block Dimensions for 145 Series block on page 54 (3 pole).
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Blocks
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
Power Splicer Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Power Blocks
Specifications:
•Connector, High Conductive Aluminum, Tin Plated, Rated for
Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1323972 CH
1323572 CH
Replace “X” with # of poles (0 = Adder)
LINE SIDE
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
141X300
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
#2 - #14 AWG
1
142X552
1/2/3
115
Phenolic
AL
#2 - #14 AWG
1
#2 - #14 AWG
1
0/1/2/3
175
Plastic
AL
2/0 - #14 AWG
1
2/0 - #14 AWG
1
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
2/0 - #14 AWG
1
0/1/2/3
175
Plastic
CU
2/0 - #14 AWG
1
2/0 - #14 AWG
1
142X121
1/2/3
175
Phenolic
CU
1/0 - #14 AWG
1
1/0 - #14 AWG
1
143X124
1/2/3
255
Phenolic
CU
250 kcmil - #6 AWG
1
250 kcmil - #6 AWG
1
140X801
2/3
255
Phenolic
CU
250 kcmil - #6 AWG
1
250 kcmil - #6 AWG
1
143X123
1/2/3
255
Phenolic
AL
250 kcmil - #6 AWG
1
250 kcmil - #6 AWG
1
140X303
2/3
310
Phenolic
AL
350 kcmil - #6 AWG
1
350 kcmil - #6 AWG
1
143X126
1/2/3
310
Phenolic
AL
350 kcmil - #6 AWG
1
350 kcmil - #6 AWG
1
132X572
CH
142X572
132X972
CH
CH = Block is also available with hinge cover attached - include “CH” at end of part number
when ordering (not available on Adder blocks) - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Splicer Blocks
(cont.)
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Specifications:
1443557
1453129
Replace “X” with # of poles
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
LINE SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
133X126
CH
1/2/3
310
Plastic
AL
350 kcmil - #6 AWG
1
350 kcmil - #6 AWG
1
133X305
CH
1/2/3
350
Plastic
AL
2/0 - #14 AWG
2
2/0 - #14 AWG
2
143X306
1/2/3
350 Phenolic
AL
2/0 - #14 AWG
2
2/0 - #14 AWG
2
144X557
1/2/3
420 Phenolic
AL
600 kcmil - #4 AWG
1
600 kcmil - #4 AWG
1
133X360
CH
1/2/3
420
Plastic
AL
600 kcmil - #2 AWG
1
600 kcmil - #2 AWG
1
133X320
CH
1/2/3
510
Plastic
AL
250 kcmil - 1/0 AWG
2
250 kcmil - 1/0 AWG
2
145X129
1/2/3
620 Phenolic
AL
350 kcmil - #4 AWG
2
350 kcmil - #4 AWG
2
145X301
1/2/3
760 Phenolic
AL
500 kcmil - #4 AWG
2
500 kcmil - #4 AWG
2
CH = Block is also available with hinge cover attached - include “CH” at
end of part number when ordering - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Blocks
•Connector, High Conductive Aluminum, Tin Plated, Rated
for Copper and Aluminum Wire
• CU Connector, High Conductive Copper, Tin Plated,
Rated for Copper Wire Only
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
Power Stud Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Power Blocks
Specifications:
•Connector, High Conductive Copper, Tin Plated
• Stud, Brass, Tin Plated, Metric (M) Studs, Steel
• Suitable for Compression Wire Lugs
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1423122
1423123
Replace “X” with # of poles (0 = Adder)
LINE SIDE
MATERIAL
LOAD SIDE
Wire Range
AWG/kcmil
Openings
Per Pole
1
1/4-20 x 9/16
1
M6 x 15
1
M6 x 15
1
CU
1/4-20 Screw
1
1/4-20 Screw
1
Phenolic
CU
1/4-20 x 9/16
1
1/4-20 x 9/16
1
230
Phenolic
CU
3/8-16 x 1 3/16
1
3/8-16 x 1 3/16
1
1/2/3
230
Phenolic
CU
3/8-16 x 1 3/16
1
1/4-20 x 1 3/16
1
144X553
1/2/3
230
Phenolic
CU
3/8-16 x 1 7/16
1
3/8-16 x 1 7/16
1
144X122
1/2/3
260
Phenolic
CU
3/8-16 x 1 7/16
1
1/4-20 x 1 9/16
2
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
Wire Range
AWG/kcmil
132X122
CH
0/1/2/3
200
Plastic
CU
1/4-20 x 9/16
132X422
CH
0/1/2/3
200
Plastic
CU
142X123
1/2/3
200
Phenolic
142X122
1/2/3
200
143X563
1/2/3
143X561
Openings Connector
Per Pole Configuration
Connector
Configuration
0.75
133X564
CH
1/2/3
310
Plastic
CU
M10 X 30
1
M10 X 30
1
133X563
CH
1/2/3
310
Plastic
CU
3/8-16 x 1 3/16
1
3/8-16 x 1 3/16
1
145X573
1/2/3
360
Phenolic
CU
3/8-16 x 1 7/16
1
3/8-16 x 1 7/16
2
145X583
1/2/3
360
Phenolic
CU
3/8-16 x 1 7/16
1
1/4-20 X 1 7/16
2
145X606
1/2/3
410
Phenolic
CU
1/2-13 x 1 7/16
1
1/2-13 x 1 7/16
1
144X614
1/2/3
840
Phenolic
CU
3/8-16 x 1
1
3/8-16 x 1
1
1.125
1.125
CH = Block is also available with hinge cover attached - include “CH” at end of part number when
ordering (not available on Adder blocks) - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Miscellaneous Power Splicer Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Specifications:
Power Blocks
•Connector, High Conductive Aluminum, Tin Plated
• Rated for Copper and Aluminum Wire
• Stud, Brass, Tin Plated
• Quick Connect, Brass, Tin Plated
• 10-32 Screw, Brass, Nickel Plated
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1413202
1413205
Replace “X” with # of poles
MATERIAL
LINE SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Load
Connection
Openings Connector
Per Pole Configuration
Catalog #
Poles
(X)
Amps
141X200
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
10-32 Screw
1
141X201
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
10-32 Tapped
Hole
1
141X202
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
.25 x .032 QC
4
141X205
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
#10-32 Hole &
(2) QC
1
141X301
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
#2 - #14 AWG
& (1) QC
1
142X411
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
M6 Hole
1
142X553
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
1/4-20 Tapped Hole
1
Insulator Conn.
See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Splicer/Stud Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Power Blocks
Specifications:
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• Stud, Brass, Tin Plated, Metric (M) Studs, Steel intended for wires terminated with crimp lugs
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
(does not apply to 133X559, 133X558, and 143X559)
• Flexible Stranded Wire Compliant
• RoHS Compliant
1433559
1453599
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
*** Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles (0 = Adder)
LINE SIDE
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
141X203
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings
Per Pole
1/2/3/4
115
Plastic
AL
#2 - #14 AWG
1
10-32 X .60 Stud
1
132X574
CH
0/1/2/3
175
Plastic
AL
2/0 - #14 AWG
1
1/4-20 x 1/2
1
132X474
CH
0/1/2/3
175
Plastic
AL
2/0 - #14 AWG
1
M6 x 13
1
142X574
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
1/4-20 x 1/2
1
143X590
1/2/3
175
Phenolic
AL
2/0 - #14 AWG
1
1/4-20 x 1 3/8
1
143X559
1/2/3
310
Phenolic
AL
350 kcmil - #6 AWG
1
3/8-16 x 11/8 Stud
1
133X559
CH
1/2/3
310
Plastic
AL
350 kcmil - #6 AWG
1
3/8-16 x 1 1/4
1
133X558
CH
1/2/3
310
Plastic
AL
350 kcmil - #6 AWG
1
M10 x 30
1
144X569
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
1/4-20 x 1 1/16
2
144X575
1/2/3
380
Phenolic
AL
500 kcmil - #4 AWG
1
3/8 - 16 x 1 5/16
1
145X596
1/2/3
545
Phenolic
AL
1000 kcmil 500 kcmil
1
3/8 - 16 x 1 3/16
2
145X599
1/2/3
760
Phenolic
AL
500 kcmil - #4 AWG
2
3/8 - 16 x 1 5/16
2
145X610
1/2/3
760
Phenolic
AL
500 kcmil - #4 AWG
2
1/2-13 x 1 5/16
1
Connector
Configuration
0.75
1.00
1.16
CH = Block is also available with hinge cover attached - include “CH” at end of part
number when ordering (not available on Adder blocks) - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Stud to Distribution Blocks
600 Volts AC/DC
Up to 1000 Volts AC/DC ( )+
Specifications:
Power Blocks
•Connector, High Conductive Aluminum, Tin Plated,
Rated for Copper and Aluminum Wire
• Stud, Brass, Tin Plated, Metric (M) Studs, Steel intended for wires terminated with crimp lugs
• Amp Rating Based on NEC Table 310-16 Using 75oC Copper Wire
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
•
• Flexible Stranded Wire Compliant
• RoHS Compliant
1333270
1333273 CH
** Openings rated for #4-14 AWG are multiple wire rated:
(2) #10 CU Str, (2 to 4) #12 CU Str, and (2 to 4) #14 CU Str.
***Openings rated for #2-14 AWG are multiple wire rated:
(2) #8 CU Str, (2) #10 CU Str, (2) #12 CU Str, and (2) #14 CU Str.
Replace “X” with # of poles
LINE SIDE
MATERIAL
Hinge Poles
Catalog # Cover (X) Amps Insulator Conn.
Threaded
Stud Size
Openings Connector
Per Pole Configuration
LOAD SIDE
Wire Range
AWG/kcmil
Openings Connector
Per Pole Configuration
133X272
CH
1/2/3
510
Plastic
AL
3/8-16 x 1 3/16”
1
#4 - #14 AWG**
12
133X273
CH
1/2/3
510
Plastic
AL
M10 x 30
1
#4 - #14 AWG**
12
133X280
CH
1/2/3
510
Plastic
AL
3/8-16 x 1 3/16”
1
#2 - #14 AWG***
8
133X281
CH
1/2/3
510
Plastic
AL
M10 x 30
1
#2 - #14 AWG***
8
133X270
CH
1/2/3
510
Plastic
AL
3/8-16 x 1 3/16”
1
2/0 - #14 AWG***
4
133X271
CH
1/2/3
510
Plastic
AL
M10 x 30
1
2/0 - #14 AWG***
4
CH = Block is also available with hinge cover attached - include “CH” at end of part
number when ordering - See page 55 for available covers
See pages 52-54 for dimensional information
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Terminal Block Dimensions
132 SERIES
1.00 [25.5]
Power Blocks
.89 [22.5]
1.82 [46.3]
2.55 [64.8]
3.00 [76.2]
2.25 [57.2]
SLOT .49 X .22 THRU
[12.3 X 5.5] TYP.
.81
[20.7]
TYP.
1.63 [41.3]
2.42 [61.5]
.85 [21.6]
Adder
132 CH SERIES
1 Pole
1.00 [25.5]
.20 [5]
2 Pole
1.82 [46.3]
3 Pole
2.55 [64.8]
2.25 [57.2]
(MTG. SLOTS)
3.00 [76.2]
.81 [20.7]
TYP.
1.63 [41.3]
2.42 [61.5]
(W/O COVER)
.20 [5]
SLOT .49 X .22 THRU
[12.3 X 5.5] TYP.
2.57 [65.2]
(WITH COVER)
.85 [21.6]
1 Pole
133 SERIES
2 Pole
.31[7.9]
1.96 [49.7]
4.00 [101.6]
3 Pole
5.36 [136.1]
3.66 [92.9]
SLOT .21 X .71 THRU
CB .44 X .94 X .29 DP TYP.
3.38 [85.7]
.97[24.6]
TYP.
1.70 [43.2]
TYP.
3.40 [86.4]
3.33 [84.6]
.39 [9.8]
.89 [22.5]
1 Pole
2 Pole
3 Pole
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Terminal Block Dimensions
133 CH SERIES
.31[7.9]
1.96 [49.7]
4.00
[101.6]
SLOT .21 X .71 THRU
CB .44 X .94 X .29 DP TYP.
5.36 [136.1]
3.66 [92.9]
3.38 [85.7]
(MTG. SLOTS)
3.40 [86.4]
(MTG SLOTS)
3.33 [84.6]
(W/O COVER)
.39 [9.8]
2 Pole
140 SERIES
L2
L3
MARATHON
MARATHON
1.00
[25.4]
MARATHON
L1
MARATHON
MARATHON
L2
MARATHON
L1
MARATHON
3 Pole
142 SERIES
.218 X.375
[5.5 X 9.5]
SLOT
1.13
[28.6]
.205 (5.2) DIA. HOLE
.411 (10.4) DIA. CLEARENCE
TYP.
1.94
[49.2]
.31
[7.9]
2.75
[69.8]
2.60 2.90
[66.0] [73.7]
2.25
[57.1]
4.63
[117.5]
3.38
[85.8]
.265 X.375
[6.7 X 9.5]
SLOT
4.77
[121.1]
3.52
[89.3]
4.13
[104.8]
3.49 [88.6]
(WITH COVER)
.89 [22.5]
1 Pole
1.45
[36.8]
.56
[14.3]
5.38
[136.6]
1.62
[41.2]
2.88
[73.0]
.56
[14.3]
.015
[.38]
.62
[15.7]
1.00
[26.0]
.60
[15.2]
2 Pole
Power Blocks
1.70 [43.2]
TYP.
.97 [24.6]
TYP.
3 Pole
2.10
[53.4]
.38
[9.6]
.89
[22.6]
1 Pole 2 Pole 3 Pole
2.67
[67.7]
.201
[5.11]
2.47
[62.7]
141 SERIES
.38
[9.7]
1 Pole 2 Pole
3 Pole
.44
[11.2]
.19
[4.9]
1.46
[37.2]
REF.
2.10
[53.3]
REF.
DIA. THRU
1.93
[49.1]
1.92
[48.8]
TYP. AT BOSS
.18
[4.5]
.52
[13.2]
ALL POCKETS
1.53
[38.8]
.32
[8.1]
.83
[21.0]
REF.
.63
[15.9]
2.29
[58.2]
2.07
[52.5]
1.27
[32.3]
.24
[6.0]
1.78
[45.2]
.70
[17.7]
.47
[11.9]
.55
[14.1]
2.75
[69.8]
REF.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Terminal Block Dimensions
143 SERIES
1.94
[49.3]
.203 (5.16) DIA. HOLE
.406 (10.31) C BORE
TYP.
5.00
[127.0]
3.47
[88.1]
4.00
[101.6]
Power Blocks
3.38
[85.7]
1.53
[38.9]
.015
[.4]
.31
[7.9]
1.53
[38.9]
1.53
[38.9]
.97
[24.6]
1.17
[29.7]
2.61
[66.2]
.22
[5.5]
1 Pole
144 SERIES
2.29
[58.1]
2 Pole
1.00
[25.4]
3 Pole
4.17
[105.9]
.40
[10.2]
.20/[5.2] DIA. THRU
.41/[10.3] C'BORE
x .18/[4.6] DP.
6.05
[153.6]
4.75
[120.6]
4.13
[104.8]
1.88
[47.8]
1.88
[47.8]
.31
[7.9]
1.88
[47.8]
.015
[.38]
1.14
[29.0]
1.50
[38.2]
2.90
[73.7]
1.12
[28.3]
1 Pole
2 Pole
3 Pole
.52
[13.1]
.265/(6.73) DIA. HOLE
.500/(12.7) C BORE
X .21 [5.3] DP
145 SERIES
3.17
[80.4]
5.85
[148.7]
8.54
[216.9]
5.50
[139.7]
4.75
[120.7]
2.69
[68.2]
2.69
[68.2]
2.69
[68.2]
2.30
[58.4]
1 Pole
2 Pole
3 Pole
.025
[.6]
1.58
[40.2]
1.10
[27.9]
3.12
[79.2]
.50
[12.7]
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Power Block Covers
Specifications:
A
140/141/142/143/144/145 Series
(Figures 1 & 2)
B
Power Blocks
•Material UL Recognized, QMFZ2, 125oC,
.06 Clear Protective Plastic
• Two Thread Cutting Screws Furnished Per Cover
• Covers are Slotted for Easy Installation
• RoHS Compliant
132/133 Series (Figure 3)
•Snap on, Hinged Cover, Black Thermoplastic
• UL Recognized, QMFZ2, 125oC
• RoHS Compliant
FIGURE 1
Dimensions (in):
Catalog #
A
CC1402
2.75
CC1403
4.00
CC1411
0.77
CC1412
1.42
CC1413
2.05
CC1414
2.68
CC1421
1.06
CC1422
1.87
CC1423
2.68
CC1431
1.78
CC1432
3.31
CC1433
4.84
CC1441
2.12
CC1442
4.00
CC1443
5.87
CC1451
2.87
CC1452
5.56
CC1453
8.28
CH1321
CH1322
-
CH1323
CH1331
CH1332
-
CH1333
B
2.25
2.25
2.40
2.40
2.40
2.40
2.75
2.75
2.75
3.38
3.38
3.38
4.00
4.00
4.00
4.50
4.50
4.50
Figure #
-
3
-
3
1
A
B
2
1
1
1
1
FIGURE 2
FIGURE 3
(Hinged Cover)
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Grounding Lugs
Power Blocks
Specifications:
•Connector, High Conductive Aluminum, Tin Plated
• Screw head is green ink
• Flexible Stranded Wire Compliant
• UL Recognized File No. ZMVV2.E43665
• CSA Certified File No. 63510-25
• RoHS Compliant
Catalog #
(Part #)
GL02
(9807052)
Wire Range
AWG/kcmil
#2 - #3
#4 - #6
#8
#10 - #14
Torque
lb in
50
45
40
35
GL02:
Ø .266
[6.75]
5/16-24 SET SCREW
.25
[6.4]
1.15
[29.2]
Ø .31
[7.9]
.90
[22.9]
.23
[5.9]
C
SA
2-14
9807052
CUAL
M
.16
[4.0]
.59
[15.1]
1.40
[35.6]
.25
[6.3]
.50
[12.7]
GL20:
Catalog #
(Part #)
GL20
(9718102)
Wire Range
AWG/kcmil
2/0 - #6
#8
#10 - #14
3/16 HEX SOCKET
Ø .406
[10.32]
Torque
lb in
.44
[11.1]
120
40
35
Ø .44
[11.1]
1.31
[33.3]
1.00
[25.4]
.32
[8.2]
C
9718102
.25
[6.4]
SA
M
.75
[19.1]
2/0-14 CUAL
.31
[7.7]
1.63
[41.3]
.61
[15.5]
GL35:
Catalog #
(Part #)
GL35
(9819830)
Wire Range
AWG/kcmil
Torque
lb in
350 kcmil - #6
375
Ø .531
[13.49]
5/16 HEX SOCKET
.56
[14.3]
.50
[12.7]
Ø .72
[18.3]
M
.54
[13.7]
1.69
[42.9]
1.13
[28.6]
SA9819830
C
.25
[6.4]
1.25
[31.8]
CUAL 350MCM-6
.56
[14.3]
2.25
[57.2]
1.13
[28.6]
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net