Part Number Description Product Designation Code This is the first section of the description which outlines the product type, formulation, density, number of sides coated with adhesive and protective liner. See the following example. V Product or Formulation E ESL V A C CP F GHB L LC MC MW SO ULD XP VK PVN = Polyethylene = Eco Seal = Standard Vinyl Series = Special Automotive = Cling Foam = Plastics Cling Foam = Fire Retardant (UL94) = Gaska Hi Bond = Log Tite = Low Compression = Improved Performance Vinyl = Weatherstrip Series = Semi Open Cell = Ultra Low Density = Extra Plasticizer = High Compression Cell =Polyvinyl Nitrile 15 2 0 Density 2 = 6 = 15 = Adhesive 0 1 2 2 pcf 6 pcf 15 pcf Etc.. = = = None 1 side 2 sides Protective Liner 0 1 2 3 4 = = = = = 5 6 7 8 = = = = 9 = Cast on Paper None Cast on Aluminum Release Paper Laminated to Polyester Film with Adhesive & Release Paper Cast on Polyester Film Release Film Release Board Laminated to Polyester Film with Adhesive & Release Board Other (Further information necessary) Non-Standard Additions This is the additional information which is included at the end of the code to specify other needs. Please note the proper order for consistency. Example as follows: V1520 Colors BE BK BR BU GN GY NA TN RD = = = = = = = = = NA RP XR Other and/or 2nd Protective Liners Beige Black Brown Blue Green Gray Natural Tan Red CP ES NF PR = Casting Paper Laminated = Polyester Film Laminated = 2 mil Natural Film = Polypropylene Film, PSA and Release Paper (PP, RP) DP = 2 Sided Release Paper (1st pass only) RP = 2nd Release Paper NOTE: Custom jobs, materials die cuts, will have special designations as needed. Example: D5 AD 3NHDPE (W, CW, CM, etc.) Other Specific Needs XR NR SW SC RW L ER GS TS CR = = = = = = = = = = Extra Release No Release Stretch Wrap Small Core Reverse Wrap Lamination Easy Release Glove Skin Top Skin Completely Reverse Wrap Dimensions Following the product designation code in the part description are the dimensions of the product. The proper order is thickness, width and length. Note: Dimensions are sometimes not used - e.g. no specified length in reels, odd shaped die cut parts, some customer material thicknesses, etc. The follow example illustrates dimensions: 1.125 x 3.500 x 12 Thickness In inches, up to 3 decimal places. Width In inches, up to 3 decimal places. Length In feet, up to two decimal places. If in inches, the " sign must be present. Part Number Description Adhesive Requirements At the end of the part description is the adhesive type and amount. The following example illustrates the adhesive designation: A 3 Type of Adhesive Coating Weight (Dry Mils) A = Standard High Tack on Vinyl 1 = 1.2 mils B = Specialty for Rubber 2 = 1.6 mils D = General Purpose 3 = 2.6 mils E = Standard High Tack for PE 4 = 3.5 mils G = Low Temperature L = Low Energy Surfaces M = Standard Laminating Adhesive S = High Performance Acrylic Warranty Gaska Tape Inc. warrants its product to be free from defects in material and workmanship for a period of twelve (12) months beginning on the date of purchase, provided the purchaser installs and uses the products according to any instructions provided by Gaska Tape Inc. Any product which fails during the warranty period due to a defect will be replaced. Upon request, Gaska Tape Inc. will be pleased to provide a copy of its written Limited Warranty with complete details of coverage, conditions and limitations. Gaska Tape Inc. makes no other warranty, expressed or implied, and specifically disclaims and disavows any implied warranty of merchantability and of fitness for a particular use. International Inquiries: Phone: 00-574-294-5431 1810 W. Lusher P.O. Box 1968 Elkhart, IN 46515-1968 www.gaska.com Phone: Fax: Toll free: email: 574-294-5431 574-293-4504 800-423-1571 sales@gaska.com