IEEE C802.16m-09/0433
Project
IEEE 802.16 Broadband Wireless Access Working Group <http://ieee802.org/16>
Title
CR on SDD : Clarification on Multi-Carrier Handover
Date
Submitted
2009-2-27
Source(s)
Kelvin Chou
Yih-Shen Chen
I-Kang Fu
Paul Cheng
Kelvin.Chou@mediatek.com
MediaTek Inc.
Re:
IEEE 802.16m-09/0008, “IEEE 802.16m Internal Documents Configurations Control Procedure (CCP)”
Abstract
This CR proposed text on the general call flow of HO with multi-carrier support
Purpose
To be discussed and adopted by TGm for the 802.16m SDD.
Notice
Release
Patent
Policy
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It
represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for
discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution,
and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole
discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The
contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and
<http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and
<http://standards.ieee.org/board/pat>.
CR on SDD : Clarification Multi-Carrier Handover
Kelvin Chou, Yih-Shen Chen, I-Kang Fu and Paul Cheng
MediaTek Inc.
Proposed SDD Text Modification
[Black: original text, blue: new next, red: modified text]
-------------------------------------------------------- Text Start
------------------------------------------------------------
19.4.8 Handover Support
An AMS in multi-carrier operation follows the handover operation in single carrier mode of IEEE 802.16m.
MAC management messages in relation with handover between an AMS and an ABS are transmitted over the
AMS’s primary carrier. Similar to the procedure defined in 10.3.2.2.3, if directed by serving ABS via HO
Command control signaling, the AMS performs network re-entry with the target ABS on the assigned fully
1
IEEE C802.16m-09/0433
configured carrier at action time while continuously communicating with serving ABS. However, the AMS
stops communication with serving ABS on primary/secondary carriers after network re-entry at target ABS is
completed. In addition, AMS cannot exchange data with target ABS prior to completion of network re-entry.
Multiplexing of network re-entry signaling with target ABS and communications with serving ABS is done via
multiple radio carriers. Figure 63 shows a general handover call flow for AMS with multi-carrier capability.
Serving
ABS
AMS
Target
ABS
HO Initiation
HO REQ
HO RSP
HO Command
Network re-entry
MS-BS data
communication during
network re-entry
HO COMPLT
Data path established
Data path established
Radio
carrier
1
Radio
carrier
2
Serving
primary
carrier
Backbone
Target Backbone Target
primary
secondary
carrier
carrier
Figure 63. A general call flow for multi-carrier HO
In case AMS is capable to process multiple carriers at the same time, the target primary carrier can be different
than the one chosen in serving cell. Figure 64 shows an example HO call flow of the case in which AMS is
capable to process multiple carriers at the same time and the target primary carrier is different than the one
chosen in serving cell from the serving primary carrier.
2
IEEE C802.16m-09/0433
Serving
ABS
AMS
Target
ABS
HO Initiation
HO REQ
HO RSP
HO Command
Network re-entry
MS-BS Communication
during Network Re-entry
HO COMPLT
Data path established
Data path established
Radio
carrier
1
Radio
carrier
2
Serving
primary
carrier
Backbone
Target Backbone Target
primary
secondary
carrier
carrier
Figure 64. Example call flow for multi-carrier HO in which the target primary carrier is different from the
serving primary carrier
-------------------------------------------------------- Text End
3
------------------------------------------------------------