Institute of Electrical and Electronics Engineers, Inc. (IEEE) 1 Source information

advertisement
Radiocommunication Study Groups
Received: 4 October 2011
Question: Question ITU-R 229-1/8
Document 5D/1117-E
4 October 2011
English only
TECHNOLOGY ASPECTS
Institute of Electrical and Electronics Engineers, Inc. (IEEE)
IMT-2000 OFDMA TDD WMAN SUBMISSION TOWARD REVISION 11
OF RECOMMENDATION ITU-R M.1457 (MEETING X+1)
1
Source information
This contribution was developed by IEEE Project 802®, the Local and Metropolitan Area Network
Standards Committee (“IEEE 802”), an international standards development committee organized
under the IEEE and the IEEE Standards Association (“IEEE-SA”).
The content herein was prepared by a group of technical experts in IEEE 802 and was approved for
submission by the IEEE 802.16™ Working Group on Wireless Metropolitan Area Networks, the
IEEE 802.18 Radio Regulatory Technical Advisory Group, and the IEEE 802 Executive
Committee, in accordance with the IEEE 802 policies and procedures, and represents the view of
IEEE 802.
2
Discussion
Following Document 5D/908, this contribution contains updated material on IMT-2000 OFDMA
TDD WMAN toward Revision 11 of Recommendation ITU-R M.1457 in line with Circular
Letter 8/LCCE/95 and the schedule received from ITU-R WP 5D contained in Att. 5.2 of
Document 5D/870. This material will be further updated in time for the final meeting addressing the
development of Revision 11.
In particular, the material required as specified in the update procedure for revisions of
Recommendation ITU-R M.1457 (8/LCCE/95) is addressed in the following Annexes:
Annex 1: Update of Section 5.6.2
Annex 2: Modifications to Section 5.6.1
Annex 3: Modifications to the GCS
Annex 4: Summary and rationale of the proposed update
Annex 5: Self-evaluation of the proposed update against the evaluation criteria
Annex 6: Self-declaration that the proposed amendments are self-consistent between Section 5.6.1,
Section 5.6.2, and the GCS
DOCUMENT1
-25D/1117-E
Annex 7: Summary of the material that is planned to be submitted to the final meeting for
Revision 11
3
Proposed materials to be included in the revision of Recommendation
ITU-R M.1457-10
IEEE 802.16 Working Group has developed the following approved and published standards as
amendments to IEEE Std 802.16:
•
IEEE Std 802.16h (“IEEE Standard for Local and metropolitan area networks - Part 16:
Air Interface for Broadband Wireless Access Systems - Amendment 2: Improved
Coexistence Mechanisms for License-Exempt Operation”) was published by IEEE on 30
July 2010. This amendment updates and expands IEEE Std 802.16, specifying improved
mechanisms, as policies and medium access control enhancements, to enable coexistence
among license-exempt systems and to facilitate the coexistence of such systems with
primary users.
•
IEEE Std 802.16m (“IEEE Standard for Local and metropolitan area networks - Part 16:
Air Interface for Broadband Wireless Access Systems - Amendment 3: Advanced Air
Interface”) was published by IEEE on 6 May 2011. This amendment specifies the
WirelessMAN-Advanced Air Interface. The amendment is based on the WirelessMANOFDMA specification and provides continuing support for legacy subscriber stations.
4
Proposal
We propose that the information contained in this contribution and its Annexes be considered in
development of Revision 11 of Recommendation M.1457.
Contact:
Michael LYNCH
E-mail: freqmgr@ieee.org
Annexes: 7
DOCUMENT1
-35D/1117-E
Annex 1
Update of Section 5.6.2
It is anticipated that the updated Section 5.6.2 will be submitted to ITU-R WP 5D (as required by
established ITU-R procedures) per the announced schedule.
Annex 2
Modifications to Section 5.6.1
It is anticipated that the update modifications to Section 5.6.1, if needed, will be submitted to ITU-R
WP 5D, as per established procedures. These modifications will capture the outcome of the current
activities on some of the technical areas as indicated in the Roadmap update (Section 3 of this
document).
Annex 3
Modifications to the GCS
It is anticipated that the updated set of the Global Core Specifications (GCS) for IMT-2000
OFDMA TDD WMAN will be submitted to ITU-R WP 5D, as per established procedures.
Annex 4
Summary and rationale of the proposed update
The main purpose of this update is to align Recommendation ITU-R M.1457 to the most updated
versions of the specifications underlying the radio interface IMT-2000 OFDMA TDD WMAN. It is
anticipated that the summary and the rationale of the modifications to Section 5.6.1 will be
submitted to ITU-R WP 5D, as per established procedures.
DOCUMENT1
-45D/1117-E
Annex 5
Self-evaluation of the proposed update against the evaluation criteria
The self-evaluation of the “total” radio interface update of IMT-2000 OFDMA TDD WMAN has
been made against all evaluation criteria listed in the update procedure contained in Circular
Letter 8/LCCE/95. The results are that the proposed updates meet the evaluation criteria as follows:
7.1
"The evaluation criteria" (Section 7.1 in Circular Letter 8/LCCE/95)
The "requirements and objectives of IMT-2000" and the "Minimum performance capabilities for
IMT-2000" as per Attachments 4 and 6 of Circular Letter 8/LCCE/47 were considered. The values
included in Circular Letter 8/LCCE/47 were used. The proposed update consists of enhancements to
the existing IMT-2000 OFDMA TDD WMAN radio interface. The evaluation of the proposed
update was done in the context of the "total" radio interface. As shown in the tables below, the
conclusion is that the IMT-2000 OFDMA TDD WMAN radio interfaces with the proposed
enhancements continues to meet all evaluation criteria in "Requirements and objectives of
IMT-2000" and "Minimum performance capabilities for IMT-2000".
TABLE 1
Requirements and objectives relevant to the evaluation of
candidate radio transmission technologies
IMT-2000 Item description
Obj/Req
Voice and data performance requirements
1. One-way end to end delay less than 40 ms
Req
2. For mobile videotelephony services, the IMT-2000 terrestrial
component should operate so that the maximum overall delay (as defined
in ITU-T Recommendation F.720) should not exceed 400 ms, with the
one way delay of the transmission path not exceeding 150 ms
3. Speech quality should be maintained during < 3% frame erasures over
any 10 second period. The speech quality criterion is a reduction of < 0.5
mean opinion score unit (5 point scale) relative to the error-free
condition (G.726 at 32 kbit/s)
4. DTMF signal reliable transport (for PSTN is typically less than one
DTMF error signal in 104)
Req
5. Voiceband data support including G3 facsimile
Req
6. Support packet switched data services as well as circuit switched data;
requirements for data performance given in ITU-TG.174
Req
DOCUMENT1
Req
Req
Source
Meets
G.174,
§ 7.5
Suppl.
F.720,
F.723,
G.114
G.174,
§ 7.11 and
M.1079
§ 7.3.1
G.174,
§ 7.11 and
M.1079
§ 7.3.1
M.1079,
§ 7.2.2
M.1034,
§§ 10.8,
10.9
Yes
Yes
Yes
Yes
Yes
Yes
-55D/1117-E
IMT-2000 Item description
Obj/Req
Source
Radio interfaces and subsystems, network related performance requirements
7. Network interworking with PSTN and ISDN in accordance with
Req
M.687-1,
Q.1031 and Q.1032
§ 5.4
8. Meet spectral efficiency and radio channel performance requirements
Req
M.1034,
of M.1079
§ 12.3.3/4
9. Provide phased approach with data rates up to 2 Mbit/s in Phase 1
Obj
M.687,
§ 1.1.14
10. Maintain bearer channel bit-count integrity (e.g. synchronous data
Obj
M.1034,
services and many encryption techniques)
§ 10.12
11. Support for different cell sizes, for example:
Obj
M.1035,
§ 10.1
Mega cell Radius~100-500 km
Macro cell Radius < 35km, Speed < 500 km/h
Micro cell Radius < 1km, Speed < 100 km/h
Pico cell Radius < 50m, Speed < 10 km/h
Application of IMT-2000 for fixed services and developing countries
12. Circuit noise- idle noise levels in 99% of the time about 100 pWp
Obj
M.819-1,
§ 10.3
13. Error performance - as specified in ITU-R F.697
Obj
M.819-1,
§ 10.4
14. Grade of service better than 1%
Obj
M.819-1,
§ 10.5
Meets
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TABLE 2
Generic requirements and objectives relevant to the evaluation of
candidate radio transmission technologies
IMT-2000 Item description
Obj/Req
Source
Radio interfaces and subsystems, network related performance requirements
1. Security comparable to that of PSTN/ISDN
Obj
M.687-1,
§ 4.4
2. Support mobility, interactive and distribution services
Req
M.816,
§6
3. Support UPT and maintain common presentation to users
Obj
M.816,
§4
4. Voice quality comparable to the fixed network (applies to both mobile
Req
M.819-1,
Table 1,
and fixed service)
M.1079,
§ 7.1
5. Support encryption and maintain encryption when roaming and during
Req
M.1034,
handover
§ 11.3
Meets
Yes
Yes
Yes
Yes
Yes
6. Network access indication similar to PSTN (e.g. dialtone)
Req
M.1034,
§§ 11.5
Yes
7. Meet safety requirements and legislation
Req
M.1034,
§ 11.6
Yes
DOCUMENT1
-65D/1117-E
IMT-2000 Item description
Obj/Req
Source
Meets
8. Meet appropriate EMC regulations
Req
Yes
9. Support multiple public/private/residential IMT-2000 operators in the
same locality
10. Support multiple mobile station types
Req
11. Support roaming between IMT-2000 operators and between different
IMT-2000 radio interfaces/environments
12. Support seamless handover between different IMT-2000
environments such that service quality is maintained and signaling is
minimized
13. Simultaneously support multiple cell sizes with flexible base
location, support use of repeaters and umbrella cells as well as
deployment in low capacity areas
14. Support multiple operator coexistence in a geographic area
Req
M.1034,
§ 11.7
M.1034,
§ 12.1.2
M.1034,
§ 12.1.4
M.1034,
§ 12.2.2
M.1034,
§ 12.2.3
Req
M.1034,
§ 12.2.5
Yes
Req
Yes
15. Support different spectrum and flexible band sharing in different
countries including flexible spectrum sharing between different IMT2000 operators (see M.1036)
16. Support mechanisms for minimizing power and interference between
mobile and base stations
17. Support various cell types dependent on environment
(M.1035 § 10.1)
18. High resistance to multipath effects
Req
M.1034,
§ 12.2.5
M.1034,
§ 12.2.8
Yes
19. Support appropriate vehicle speeds (as per § 7)
Note: Applicable to both terrestrial and satellite proposals
20. Support possibility of equipment from different vendors
Req
M.1034,
§ 12.2.8.3
M.1034,
§ 12.2.9
M.1034,
§ 12.3.1
M.1034,
§ 12.3.2
Yes
21. Offer operational reliability at least as good as 2nd generation mobile
systems
22. Ability to use terminal to access services in more than one
environment, desirable to access services from one terminal in all
environments
23. End-to-end quality during handover comparable to fixed services
Req
M.1034,
§ 12.1.3
M.1034,
§ 12.3.5
M.1035,
§ 7.1
M.1034-1 §
11.2.3.4
Yes
24. Support multiple operator networks in a geographic area without
requiring time synchronization
25. Layer 3 contains functions such as call control, mobility management
and radio resource management some of which are radio dependent. It is
desirable to maintain layer 3 radio transmission independent as far as
possible
26. Desirable that transmission quality requirements from the upper layer
to physical layers be common for all services
27. The link access control layer should as far as possible not contain
radio transmission dependent functions
Obj
DOCUMENT1
Req
Req
Req
Req
Req
Req
Obj
Obj
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Obj
M.1035,
§8
Yes
Obj
M.1035,
§ 8.1
M.1035,
§ 8.3
Yes
Obj
Yes
-75D/1117-E
IMT-2000 Item description
28. Traffic channels should offer a functionally equivalent capability to
the ISDN B channels
29. Continually measure the radio link quality on forward and reverse
channels
30. Facilitate the implementation and use of terminal battery saving
techniques
31. Accommodate various types of traffic and traffic mixes
Obj/Req
Source
M.1035, §
9.3.2
Obj
M.1035,
§ 11.1
Obj
M.1035,
§ 12.5
Obj
M.1036,
§ 1.10
Application of IMT-2000 for fixed services and developing countries
32. Repeaters for covering long distances between terminals and base
Req
M.819-1,
stations, small rural exchanges with wireless trunks etc.
Table 1
33. Withstand rugged outdoor environment with wide temperature and
Req
M.819-1,
humidity variations
Table 1
34. Provision of service to fixed users in either rural or urban areas
Obj
M.819-1,
§ 4.1
35. Coverage for large cells (terrestrial)
Obj
M.819-1,
§ 7.2
36. Support for higher encoding bit rates for remote areas
Obj
M.819-1,
§ 10.1
Satellite component (Not required for RTT submission)
37. Links between the terrestrial and the satellite control elements for
Req
M.818-1,
handover and exchange of other information
§ 3.0
38. Take account for constraints for sharing frequency bands with other
Obj
M.818-1,
services (WARC-92)
§ 4.0
39. Compatible multiple access schemes for terrestrial and satellite
Obj
M.818-1,
components
§ 6.0
40. Service should be comparable quality to terrestrial component as far
Obj
M.818-1,
as possible
§ 10.0
41. Use of satellites to serve large cells for fixed users
Obj
M.819-2,
§ 7.1
42. Key features (e.g. coverage, optimization, number of systems)
Obj
M.1167,
§ 6.1
43. Radio interface general considerations
Req
M.1167,
§ 8.1.1
44. Doppler effects
DOCUMENT1
Obj
Req
M.1167,
§ 8.1.2
Meets
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-85D/1117-E
TABLE 3
Subjective requirements and objectives relevant to the evaluation
of candidate radio transmission technologies
IMT-2000 Item description
Obj/Req
Source
Meets
1. Fixed Service-Power consumption as low as possible for solar
and other sources
2. Minimize number of radio interfaces and radio sub-system
complexity, maximize commonality (M.1035, § 7.1)
3. Minimize need for special interworking functions
Req
Yes
4. Minimum of frequency planning and inter-network coordination
and simple resource management under time-varying traffic
5. Support for traffic growth, phased functionality, new services or
technology evolution
6. Facilitate the use of appropriate diversity techniques avoiding
significant complexity if possible
7. Maximize operational flexibility
Req
8. Designed for acceptable technological risk and minimal impact
from faults
9. When several cell types are available, select the cell that is the
most cost and capacity efficient
10. Minimize terminal costs, size and power consumption, where
appropriate and consistent with other requirements
Req
M.819-1,
Table 1
M.1034,
§ 12.2.1
M.1034,
§ 12.2.4
M.1034,
§ 12.2.6
M.1034,
§ 12.2.7
M.1034,
§ 12.2.10
M.1034,
§ 12.2.11
M.1034,
§ 12.2.12
M.1034,
§ 10.3.3
M.1036,
§ 1.12
Req
Req
Req
Req
Req
Obj
Obj
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TABLE 4
Minimum performance capabilities
Test environments
Indoor office
Outdoor to indoor
and pedestrian
Vehicular
Mobility considerations
Handover
Mobility type
(Low)
Yes
Mobility type
(Medium)
Yes
Mobility type
(High)
Yes
Support of general service
capabilities
Packet data
Asymmetric services
Multimedia
Variable bit rate
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
8.1
Compatibility with the existing IMT-2000 radio interfaces
The proposed update fits well within the framework of the existing IMT-2000 OFDMA TDD
WMAN radio interface. All features supported in the existing IMT-2000 OFDMA TDD WMAN
are still supported in the proposed update.
DOCUMENT1
-95D/1117-E
8.2
Harmonization within multiple proposals
See Section 9.2.
“Other considerations” (Section 9 in 8/LCCE/95)
9.1
Benefits of the proposed enhancement
The proposed enhancements improve the performance of IMT-2000 OFDMA TDD WMAN radio
interface.
9.2
Harmonization and consensus building
Through their membership and through liaison communications, the SDO stakeholders, the IEEE
and the WiMAX Forum, have established harmonization and consensus building. IEEE expects
that the WiMAX Forum system profile will remain fully consistent with IEEE Std 802.16.
9.3
Enhanced performance capabilities
The proposed update is fully in line with the ongoing activities on the vision for the enhancements
of IMT-2000, also reflected in the Roadmap for the future updates of Recommendation
ITU-R M.1457.
Annex 6
Self-declaration that the proposed amendments are self-consistent
between Section 5.6.1, Section 5.6.2, and the GCS
A formal statement will be provided stating that the proposed amendments are self-consistent
between Sections 5.6.1, 5.6.2, and the GCS, as per established procedures.
Annex 7
Summary of the material that is planned to be submitted
to the final meeting for Revision 11
It is planned that the following material will be submitted in its final form to ITU-R for the final
meeting of Revision 11, as per established procedures.
1)
Revised Section 5.6.2.
2)
Final version of revised Section 5.6.1, if needed.
3)
New set of Global Core Specifications, if needed.
4)
Summary and rationale of the proposed update.
5)
The final text of the self-evaluation (as per Annex 5 of the current contribution).
6)
Formal self-declaration of consistency between Section 5.6.1, Section 5.6.2, and the
GCS.
Letters of Conveyance will be submitted to ITU-R BR Counsellor, as per established procedures.
________________
DOCUMENT1
Download