IEEE C802.16m-09/2706
Project
IEEE 802.16 Broadband Wireless Access Working Group <http://ieee802.org/16>
Title
Editorial corrections in the trigger condition table (16.2.2.1.3)
Date
Submitted
2009-12-26
Source(s)
Jaehyuk Jang, Youngbo Cho
Samsung Electronics
E-mail:
jack.jang@samsung.com
*<http://standards.ieee.org/faqs/affiliationFAQ.html>
Re:
IEEE 802.16-09/0073: IEEE 802.16 Working Group Letter Ballot Recirc #30b
Section 16.2.2.1.3 MAC Signaling Header
Abstract
This contribution provides editorial corrections in the trigger condition table
Purpose
To be discussed and adopted by WG LB
Notice
Release
Patent
Policy
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It
represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for
discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution,
and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole
discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The
contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and
<http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and
<http://standards.ieee.org/board/pat>.
Editorial corrections in the trigger condition table (16.2.2.1.3)
Jaehyuk Jang, Youngbo Cho
Samsung Electronics
Introduction
This contribution is to correct an editorial errors in Table 731. Table 731 needs to be *splitted* into two tables,
as instructed in the contribution C802.16m-09/2647r2 which was adopted in the previous Atlanta meeting.
1
IEEE C802.16m-09/2706
Proposed Text
Update the following section in D3.
----------------------------------------------------- Start of Proposed Text ----------------------------------------------------16.2 Medium access control
16.2.6.2 Trigger condition definitions
{To Editor : Replace the Table 731 in D3 with following *two* tables, i.e., editor needs to split the Table 731
into two as follows}
…
Name
Type/Function/Action
Trigger Value
Type
xx.1
xx.2
Trigger averaging duration
xx.3
Name
ABS type
Type/Function/Action
Trigger Value
Trigger averaging duration
Table 731-Trigger TLV Description
Length (Bytes)
Value
1
See Table YY-for description
1
Trigger value is the value used in comparing measured metric for
determining a trigger condition
1
Trigger averaging duration is the time measured in number of
frames over which the metric measurements are averaged.
Table 732-Trigger TLV for another ABS type Description
Type
Length (Bytes)
Value
xy.1
1
ABS type of target ABS for this Trigger TLV: (Macro Hot-zone
ABS, Femto ABS, etc)
xy.2
1
See Table YY-for description
xy.3
1
Trigger value is the value used in comparing measured metric for
determining a trigger condition from serving ABS to target ABS
(which is defined in ABS type).
xy.4
1
Trigger averaging duration for target ABS (which is defined in
ABS type) is the time measured in number of frames over which
the metric measurements are averaged.
------------------------------------------------------ End of Proposed Text ------------------------------------------------------
2