IEEE C802.16m-09/2843
Project
Title
IEEE 802.16 Broadband Wireless Access Working Group <http://ieee802.org/16>
Proposed changes on the definition of Station Identifier (STID) (16.2.1.2.1)
Date
Submitted
2009-12-30
Source(s)
Kaushik Josiam, Qi Wu, Taeyoung Kim,
Seonghyeon Chae, Hai Wang, Youngkyo
Baek, Jaejeong Shim
Samsung Electronics
Email :
kjosiam@sta.samsung.com
qi.wu@samsung.com
ty33.kim@samsung.com
seonghyeon.chae@samsung.com
wang.hai@samsung.com
youngkyo.baek@samsung.com
brian.shim@samsung.com
Re:
Contribution in support of a comment on P802.16m/D2 currently under LB#30
Abstract
This contribution proposes the changes on the definition of STID and MSTID.
Purpose
For review and adoption by IEEE 802.16m TGm
Notice
Release
Patent
Policy
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It
represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for
discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution,
and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name
any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole
discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The
contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16.
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and
<http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and
<http://standards.ieee.org/board/pat>.
Proposed changes on the definition of Station Identifier (STID)
(16.2.1.2.1)
Kaushik Josiam, Qi Wu, Taeyoung Kim, Seonghyeon Chae, Hai Wang, Youngkyo Baek,
Jaejeong Shim
Samsung Electronics
---------------------------------------------------- Proposed Text #1 -----------------------------------------------Make the following changes to Section 16.2.1.2.1 in Page 19 beginning Line 30 in P802.16m/D3.
1
IEEE C802.16m-09/2843
16.2.1.2.1 Station Identifier (STID)
A 12-bit value that uniquely identifies an AMS in the domain of the ABS. The ABS shall assign an 12 bit STID
to each AMS during network entry as described in 16<15.2.15>. The STID shall uniquely identify the AMS in
the domain of the ABS. An AMS may be assigned The ABS may assign a new STID to an AMS during network
reentry.
This subclause does not apply to the Multicast Station Identifier described in 16.2.1.2.1.2.
16.2.1.2.1.1 Temporary Station Identifier (TSTID)
An STID The temporary station identifier (TSTID) is a kind of STID used temporarily to protect the mapping
between the STID, which is used after network entry, and the AMS MAC Address. The ABS assigns and
transfers a TSTID to the AMS by AAI_RNG-RSP during initial ranging procedure. During registration
procedure the ABS assigns and transfers an STID to the AMS by encrypted AAI_REG-RSP. The ABS shall
release the TSTID when it identifies that the AMS has successfully completed the registration procedure.
16.2.1.2.1.2 Multicast Station Identifier (MSTID)
A 12-bit value that is used to deliver E-MBS contents on broadcast and multicast service flows. Combined with
4-bits long FID (see 16.2.1.2.2), the MSTID uniquely identifies a specific E-MBS content in the domain of an
E-MBS zone (see 16.9.3.2).
2