Extended MAC Header for System Information Update Notification (16.2.2.2)
Document Number: IEEE C80216m-10/0212r2
Date Submitted: 2010-03-16
Source:
Yih-Shen Chen, Kelvin Chou and Paul Cheng
MediaTek Inc.
Shantidev Mohanty
Intel
Ming-Hung Tao
ITRI
E-mail: yihshen.chen@mediatek.com, kelvin.chou@mediatek.com
Re: Letter Ballot #31a on the Draft Amendment (IEEE P802.16m/D4)
Base Contribution: This is base contribution
Purpose: Propose to be discussed and adopted by TGm for the 802.16m Amendment
Notice:
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in
the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material
contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an
IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s
sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this
contribution may be made public by IEEE 802.16.
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
<http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>.
Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.
Introduction (1/3)
• To sustain normal network operations, serving ABS broadcasts and
adjusts its configuration via system information updating
– The critical information is broadcasted via P-SFH/S-SFH IEs in 802.16m
• SFH update mechanism is defined in 16.2.23
– When P-SFH change count is updated, AMS shall decode the up-todate system information according to S-SFH bitmap information
– The minimal validity duration of each S-SFH IE SP is determined by
“Rate of change of S-SFH info” in SP3
• The timing of SFH broadcasting is superframe-based operation
• For sleep mode control, there are two time units:
– Frame-based operation is the default time unit
– Subframe-based operation is also supported if configured (16.2.16.2.1)
• E.g., VoIP
• Obviously, the timings of SFH transmission and and sleep mode
control are different
2
Introduction (2/3)
• In current specification, AMS may wake up a little bit
earlier to get the system information
– Micro-sleep-like mechanism can be applied
• With the knowledge of S-SFH update periodicity, AMS
can wake up some specific SFH time to decode SFH
information
• It is assumed that SFH update rate is very low
– Most of the time, AMS checks P-SFH change count and nothing
happens
• Moreover, S-SCH tracking is good enough to maintain
physical layer synchronization
• Therefore, it is motivated to reduce SFH decoding rate
for sleep-mode operation
3
Introduction (3/3)
• Another question is related to the information
update of broadcast messages:
– AAI_SCD
– AAI_NBR-ADV
• It’s better to have an indication to notify the
system information update for sleep mode AMS
4
Proposed Solution
• ABS transmits a unicasting message to sleep-mode AMS for
notifying the coming of system information update
– It can be a piggyback extended MAC header
• Once the AMS decodes the message, it figures out that system
information is going to be updated
– It can keep awake to decode SFH or broadcasting MAC management
messages
• Performance analysis:
– Pros:
• AMS does not require to decode SFH frequently
• AMS can figure out when broadcast MAC messages will be transmitted
– Cons:
• DL signaling overhead
• Since SFH update does not happen frequently, the overhead is
acceptable
5
Proposed Text (1/1)
• Add a new section 16.2.2.1.3.6
16.2.2.2.11 System Information Update Header (SUH)
ABS transmits SUH to notify that system information is going to be updated.
When detecting the message, AMS shall try to obtain the up-to-date system
information before entering sleep window.
Size (bits)
Notes
FID
4
Flow identifier. Set to 0001.
Type
4
MAC signaling header type =0b0101
Update of AAI_SCD
1
Update of
1
Syntax
System Information
Update Header (){
AAI_NBR-ADV
}
6