Comments on Update of SFH inforamtion during ARS operational mode (16.6.2.16.2)
IEEE 802.16 Presentation Submission Template (Rev. 9)
Document Number:
IEEE C802.16m-10/0665
Date Submitted:
2010-4-30
Source:
Shih-Yuan Cheng, Whai-En Chen wechen@niu.edu.tw
National Ilan University
Shiann-Tsong Sheu, Chih-Cheng Yang stsheu@ce.ncu.edu.tw
National Central University
Kanchei(Ken) Loa, Yi-Ting Lin, Tsung-Yu Tsai,
Youn-Tai Lee
, Chun-Yen Hsu, Chiu-Wen Chen
Institute for Information Industry
Yang-Han Lee, Yih Guang Jan
Tamkang University loa@iii.org.tw
*< http://standards.ieee.org/faqs/affiliationFAQ.html
>
Venue: IEEE Session#67, Bangalore, India.
Re: IEEE 802.16-10/0011, “IEEE 802.16 Working Group Letter Ballot#31a”, on P802.16m/D5
Base Contribution: This is base contribution.
Purpose:
To be discussed and adopted by TGm for 802.16m LB#31a.
Notice:
This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups . It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein.
Release:
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting
IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.1
Patent Policy:
The contributor is familiar with the IEEE-SA Patent Policy and Procedures:
< http://standards.ieee.org/guides/bylaws/sect6-7.html#6 > and < http://standards.ieee.org/guides/opman/sect6.html#6.3
>.
Further information is located at < http://standards.ieee.org/board/pat/pat-material.html
> and < http ://standards.ieee.org/board/pat >.

•
In current D5 page 807 line 15 :
–
If Cell Bar bit = 1, this cell is not allowed for network entry or re-entry

–
In page 366 line 37 states that
•
If the AMS reads cell_bar=1 in SFH, this which means this cell does not allow access of new AMS and the AMS shall select a different cell to restart network entry procedure.
–
In page 387 line 17 states that
•
If an idle mode AMS is paged by an ABS whose Cell Bar bit=1, then the AMS shall not perform network re-entry to this ABS.
–
In page 529 line 28 states that
•
If Cell Bar bit = 1 , this cell is not allowed for network entry or re-entry

•
Since the cell is not allowed for network entry or re-entry by operator or the ABS is out of service.
•
Therefore, the AMS shall not perform HO network entry or re-entry to a cell with Cell
Bar bit=1 in its S-SFH.
•
To consistency with other paragraphs, we suggest to modify the wording “is” to “shall”.

[Modify the following text in Table 972—RS_ERI message format]
Name Size (bit)
Cell bar information 1
Notes
If Cell Bar bit = 1, this cell is shall not allowed for network entry or re-entry